Do connect with us and offer suggestions for videos you'd like to see: twitter.com/bitesized2020 instagram.com/bitesizedinsta/ facebook.com/BiteSizedScienceFB/ www.patreon.com/BiteSizedScience

Great explanation and found the video quite funny too 😁👍🏽👌🏽

Dude make more videos.... You are very good at it. Please don't lose inspiration it will such a waste. So many people can benefit from these videos. Btw absolutely lived it.

This one is full of bangers. Loved it!

I just want to thank you. You explained everything you basically need to understand what torque is and why it’s going down at higher rpms and also made me smile. Thank you

That was an awesome video. Very entertaining! Thanks. I'm specifically for stuff on the Speed vs Torque curves in relation to dental handpieces (air turbine ones) but this has given me enough to infer quite a bit from the limited info our lecturer gave us. Thanks again!!

Dude, this was terrific. I am going to watch it again and re-watch until I fully understand it.

Dude, I'm telling you, keep it up. You're doing to nice. All the best for your future journey.

Easily the most informative and fun video ever

Thank you so much! Loved the video! Very informative and entertaining!

This was just pure excellence in explaining. A lot of fun examples to clarify the concepts.

More educational and entertaining than expected.

You're doing a good job bro, keep at it

well done! you deserve to have more subscribers

this was fun, hat's off to your effort! kept it real engrossing!

underrated, you need more subs man!!

Please keep making videos, they are amazing

That fart noise at the spark plug just earned you another subscriber.. well done. 😆

I love everything about this video

Fantastic explanation thank you

Awesome video very educational

Great tutorial, thanks!

Concise and precise. Awesome video and to that I subscribe.

Good video.Explains practically

damn such an amazing video with such low views and likes this is the under rated side of KZread.

Very well explained!

YES. THANK YOU FOR THIS.

Watching this 3 yrs after upload but so useful.

Great little video. That was a lot of fun. 🙂

wow dude you are amazing the edit is on point haha keep up the good work btw your english is excellent

Great vid!

thanks for the educational video

Very awesome video bro. Funny but adduced at the same time 👍👍

AMAZING! SUBSCRIBED!

Great video

One word: EXCELLENT

@AnIdiotAboard_

Жыл бұрын

Thats three words.

Nice one Ahmad.

Awesome video

That Volvo engine spec sheet you displayed at 03:58 is crazy, that amount of torque puts even the bigger i6s of Caterpillar to SHAME. Ofc. we talking stock.

Subscribed!

brilliant 😄, thank you

Amazing, by the accent i am guessing it's an Indian guy. Probably the first sensible Indian youtuber ❤️

Best video on yt 😂❤️

Good explanation

Honesty a great video! You deserve more subs! Can you do one on the use-case of higher RPMs for racing applications?

Too good!

Good job

Thank you very much 😊

ill keep this is mind when tipping over a pyramid 😂

Nice. Like oversimplified

This videos shoulf have more views

@aileronhelicopters

2 жыл бұрын

I also don't know why

Hi Dear Friend As a Automobile engineer...my hats off ti to you....short video but very sweet and effective ❤

Bootiful

Great!!

nice video

Thanks ☺️👍🤩 buddy

Very simple explanation, the faster the engine spins the less time air can enter the cylinder, therefore the explosions will be less powerful, but still fast.

Very well delivered! 😂😂👏👏👏

You sir, are funny! And quality videos!

Hilarious yet informational video. Light weight baby. Learned more knowledge thanks to your video. Thank you

great sensei 😁

I like your sense of humor 😄

Excellent video, loved it. However I felt the main point of the video i.e. why does higher rpm result in lower torque was given the smallest time slot which was supposed to be the star of this episode.

great

epic content

this probable the best Indian YTvideo explanation I'VE seen yet hahahaha with accent yet understandable!!!!!!woooooooooooo yeah

This guy is so funny. Defs underrated.

Youre awesome at explaining things... love it

Man you did a gread job.

Really creative video 🤣👏

3:30 "so it's quite obvious that if we increase the rpm the torque also increases". My opinion, if we increase the torque, the rpm will increase (with same load).

When torque and horse power is reduced due to ignition delay,friction and air flow complications why there is no reduction happening in Rpm according to it. It should also decrease no?

@abcdefghabcdefgh994

3 жыл бұрын

👍🏽👌

@tfaith08

2 жыл бұрын

There is, but most engines can rev high enough to sling apart without a rev limiter. You just never rev enough to see the reduced rpm ceiling. Most modern two strokes are so reliant on efficiency that they do see an RPM cap without a rev limiter.

Best best best!

*Epic*

cool dude

Today my all doubts cleared why power and torque reduces after a certain extent.

Buildings had an overhang so you could pour boiling oil on traveling salesman and other undesirables that found their way to your doorstep.

I think the more interesting question is why torque decreases left from the peak? Aren't low rpms better for volumetric efficiency hence torque ?

thanks yea

Hey, in a game called beamng drive I have and “over torque risk and I can’t find out why (the game has all engine parts that real cars and trucks have) I’ve checked my differentials, final drive, transmission, engine, intake, supercharger. And all of it is fine, I had all the same mods apbefore and it was fine but only now that it started getting the torque risk. Is it possible to give me some help on what engine parts I should check?

Such a pitty this channel is not-so-active. Is funny and understandable

less tq at higher rpm. im assuming less power extraction. less time to use the energy in the cylinder, less time to get fuel and mixture perfect etc.

Everyone should see this🤣🔥🔥🔥🔥

The old timber buildings were restricted by the road space needed for carts and horses at ground level. But unless you ride a giraffe, you don't need that road space further up.

bro how do you have 212 subs not 2.12 Million

@DeepakYadav-rg1mx

3 жыл бұрын

Exactly my point

@aileronhelicopters

2 жыл бұрын

Same. I wonder 🤔

Did my engine more efficient when i ride at the max torque?

Hell ya dude.

Is the torque power of a Tesla turbine higher then a certain Darieus turbine with a wide of 30 cm?

literally came here for the last 1 min of the video

Force decrease after peak torque. That's the true answer.

Sabbash

I think there is something im not understanding, torque generates the rpm, cant see a scenario where rpm increases and torque decreases. A bigger combustion, bigger torque, bigger rpm.. can someone help please.. i also think the correct statement is if you increase torque you will increase rpm not the other way around

😇

LOGHTWEIGHT BABY!!!

I say, "Medieval Temperate building" 😂😂😂😂

inertia of air fuel valve time rezonans air in intake exhasut sytem ,inertia of twisitng part like crankshaft piston valve spring which cant go back so fast at certain rpm etc all this eat energy at biger rpm 😉 so such reduce output torque at higher rpm but it dosent matter what really matter is what level of power and torque and at which rpm manufactory want to setup theyr engine once they achieve it the achieve what they want achieve 👍🏻

I laughed like crazy

Very funny video 🤣

3:00 🤣

No such thing as unrealistic stunt in India, brother.