Great tool! Bought few days ago. 2 days has past, and I have sharpen almost all my drill bits! It works brilliant!

@JeffFischer1

Жыл бұрын

Glad to hear it. Now that you have it, the next thing is a diamond wheel. I bit the bullet and bought one and it makes the tool even better.

Thanks for the video! I have just bought a DBS-22 and this was exactly what I needed to see. The offset tip is great :)

@JeffFischer1

7 жыл бұрын

Thanks for watching and enjoy your DBS. My bits have all been redone with the Tormek method and cut beautifully.

I have ordered ths jig and think youre "tip" is very helplfull…. thank you for sharing.

@JeffFischer1

4 жыл бұрын

Thank you and good luck with your jig. I hope you get the results I did.

Looks like a fun hobby as in going out to yard/estate sales to buy up drill bits. If I could implement changes in such a system it's a ratcheting system for the drill bit, or a system that you would hear & feel/get positive feed backs f clicks like a gun scope. So you would do the math on how many clicks you need to do, lock it down and then grind.

@JeffFischer1

Ай бұрын

Thanks for watching.

Thanks for posting this.

@JeffFischer1

4 жыл бұрын

You're welcome Ryan, thank you for watching.

Just picked up a Dbs22 for my T8 as well and a Japanese wet stone and love it

@JeffFischer1

2 жыл бұрын

If you have the money buy a diamond stone and your love will grow even more!

is that a T8 or the older 2000? I have a 2000 which the info is sketchy about using this jig with it

@JeffFischer1

5 жыл бұрын

It is the 2000, with the a new stone, which my son now owns. The jig itself is well worth the money. I have since bought the T8. That too is worth the money. Thanks for watching.

impressive shatpness

@JeffFischer1

7 жыл бұрын

Thanks for watching. I think the bits work better than new and to resharpen them it will take even less time.

Good work with the camera

@JeffFischer1

4 жыл бұрын

Thanks for watching and the kind words.

молодец, спасибо

@JeffFischer1

3 жыл бұрын

Your welcome and thanks for watching.

Thanks for sharing. Thinking of getting the same Tormek as you have. You know if its possible to sharpen spade drill bits and auger bits, on the DBS-22?

@JeffFischer1

6 жыл бұрын

Not that I know of.

Hello Jeff, thank you for the video. I am currently working on a diy grinding jig for the Tormek and would like to know the distance between the P and the S stop. Can you measure this for me? Thanks in advance and greetings from Germany.

@JeffFischer1

10 ай бұрын

13/16 of an inch. Hope that helps. Thanks for watching.

@thomas8719

10 ай бұрын

@@JeffFischer1 Thank you very much, that helps a lot.

Swedish quality 👍

@JeffFischer1

Жыл бұрын

Thanks for watching.

Jeff, do you dress your stone for course grit, or fine?

@JeffFischer1

3 жыл бұрын

Fine, but I have since gotten the diamond wheel (600) and that has made a tremendous difference.

Did you hone the burr?

@JeffFischer1

11 ай бұрын

Nope, just put it to work. Thanks for watching.

if im correct, from what i saw in the background you are a woodworker like myself. those bits are designed for metal, of course they will work in wood because wood is much softer than metal. try to drill som metal and see how many holes you can druill before they get dull. if you can drill 6 to 12 holes in metal then its a good bit, depending on the density of course , more holes if you use lube. if you can only do a couple of holes lube or no lube tgen it's a just a cheap drill bit and no good for metal but you can still drill many holes in wood. i have a question, at the beginning of the video you had laid out some drill bits that you shrapened with your new DBS-22, here is where you lost me completely.....the DBS-22 box was still sealed. i said to myself, holy shit, how did he do that. Are you a woodworker and a magician? hapoy woodworking !

@JeffFischer1

7 жыл бұрын

LOL! The power of editing. Just do everything on tape and put the last thing done first. Thanks for watching and I am just a woodworker.

@ginoasci2876

7 жыл бұрын

no no, don't say just a woodworker. you are a woodworker with much pride. i've watched a few of your videos, you do a great job. you take your sweet time, and enjoy every minutes. it's what it's all about. put some of your projects on lumberjocks.com if you haven't already. i'm on there as Falegniam, not Falegniame. He's a good guy, but we are two different people. Welcome.

@JeffFischer1

7 жыл бұрын

Thanks Gino! I am not on lumberjocks but I will look into it.

@ginoasci2876

7 жыл бұрын

it's a great community of friendly, and helpful fellow woodworkers. you can ask for help, give advice, comment on projects, read comments we leave on your projects. some projects are amazing, some are great, some are good, some are not so great, but we try to boost everyone's ego, and make each other feel good about the work. there are tens of thousands of projects to view. try not to sit in that chair in front of your computer for too long thou lol it's not healthy. you can spend many hours just looking, no kidding. i've had issues with my tablesaw, and have asked for advice, others were more than willing to help. anyway, i'll shut up. check it out. happy woodworking, and "always" be safe.

@JeffFischer1

7 жыл бұрын

Will do, thanks!

How do I get this product in India, any distributers ?

@JeffFischer1

3 жыл бұрын

I'm sure you can find someone who ships internationally. Thanks for watching.

@Gam-kp8bt

Жыл бұрын

​@@JeffFischer1Do you have a drawing of Tormek DBS ?

@JeffFischer1

Жыл бұрын

@@Gam-kp8bt No I don't, sorry. Thanks for watching.

Metal drill gauging into wood not to bright? Show it against metal to really appreciate it?

@JeffFischer1

6 жыл бұрын

Understood, but I don't do a lot of metal work, sorry. Thanks for watching.

한국인데요 구매할수있나요