Top Service Gyratory Crusher TSUV
The lowest cost per tonne of product processed Crushing just got harder. With low grade ore deposits requiring higher power and higher throughputs than ever before, you need a crusher that can take the impact - without compromising on efficiency. With more power and greater capacity, the digitally-enabled TSUV is the world’s most OPEX and CAPEX-efficient gyratory crusher. Learn more - flsmidth.io/3pHUumQ
Пікірлер: 30
Don't know how I ended up watching this, but if I was in the mining business I would definitely consider looking at this product just from the video
@flsmidth
3 жыл бұрын
Thank you Mike!
@jamiecyrus1223
Жыл бұрын
Hahaha, same! Looks like a Rolls Royce of a machine.
I have been shareholde in potagoa and later fls for 25 years but I never knew the company made these amazing machines.
You should make a computer game with that stuff, I wanna have my own virtual gyratory crusher and watch it operate as I sip my morning coffee
good illustration
FLS is really amazing....
Quality and Competence = FLS
ತುಂಬ ಚೆನ್ನಾಗಿದೆ ಕ್ರಶರ್
That is so cool a master peice by desighn.
Now i know how they work thank
@vonarg
3 жыл бұрын
I was searching about this as well. The thing is that most of the crushers i can see have lateral moves (concentric) at the same time. Like on this one: kzread.info/dash/bejne/e6GmxaaGobqcoJM.html
@shahamitava4971
2 жыл бұрын
kzread.info/dash/bejne/aHuXlNqgYMjShJs.html
Toppp, FLS!!!
I happen to work in the mine, why does the safety set pin on the counter shaft break when there is no hard material in the crusher chamber
@jamesb.9155
Жыл бұрын
Once upon a time design flaw?
what I watch when TV program is always crap...
how much
You sold me, I'll take 10
@flsmidth
2 жыл бұрын
Dear Guiseppe, thank you for your interest in the Gyratory Crusher TSUV. Regarding any questions, you are welcome to contact us using this link www.flsmidth.com/#data-modal=modal-contact
how to buy crusher n how much crusher
@flsmidth
3 жыл бұрын
Thank you for your interest in our products. Regarding any questions, you are welcome to contact us using this link www.flsmidth.com/#data-modal=modal-contact
can i work at your company sir haha
Why is the head spinning?
@reefready9284
3 жыл бұрын
That`s what I was wondering unless it`s just a sped up video
@devenl01
2 жыл бұрын
There should be some head spin during operation from the interaction of the eccentric bushing and the main shaft ~20rpm. Video seems to show something like that.
@sar9907
Жыл бұрын
@@devenl01 i work at a primary crusher using gyratory FLsmith. ~29 rpm is what to shoot for more than that. You need to put grease pump in manual for about 4 min then switch it back to cascade. Brings rpm# down to SP.
Were gönna nheed a bigäir Böät
Looks like a ripoff