+1 for the Jason Snyder cameo :D

Some GoPro settings would be pretty cool man

@ad2332

3 жыл бұрын

There’s a video from a month or so ago where Ryan goes through all that

I'd love to see a video on your post process for GoPro footage! I've just recently been tossing around the idea of making some videos myself, and it would be nice to see someone else's method. I love the lighting in your videos too... so, ya know, if you ever needed more video ideas.

@GroundSwellRacing

3 жыл бұрын

I second that request please. I currently use the same GoPro 8 to do the videos for our channel but I'd love to see your process. Also curious what program/OS you use to edit with.

@L4BEL420

3 жыл бұрын

Third this. I just got a gopro hero 8 black and I love the potential, but I'm camera illiterate. Also, any tips on making a gopro mount *stay* on a car?

@rodcaseracing3376

3 жыл бұрын

I'm using my cell at 1080p 60 fps, I would be interested in what settings you use then crop in later?

@jamesbooth5522

3 жыл бұрын

Would definitely love to see some info on the settings used and how you get such good quality video footage . To be honest it’s better than most RC racing footage out there , you know your stuff and your passion is addictive 😀

Shock shaft pliers are a life saver when working on shocks or assembling turnbuckles.

Yes on the GoPro video. Add to the list of top tools...INFRARED THERMOMETER. Gotta read those motor/engine temps!!!

Would definitely like to see video editing process and methods!

The more Ryan Harris videos I watch, the more I like! Great video and great links. I appreciate the helpful guidance whenever it comes to expenses.

I see a cigar humidor in the back that completes an rc work area!

@Demojoe97

3 жыл бұрын

I was going to say the same thing

@Demojoe97

3 жыл бұрын

What cigars do you have in there Ryan?

The dewalt screwdriver is really the best. The gyro controls are amazing. Super fine control over speed. Twist in, twist out. It's great. If you're not tied in by shared batteries you should check it out. (Make sure you get the one with the clutch.)

@finleymakee4850

Жыл бұрын

the makita one is really good too (8v)

Great vid love this stuff. Yes a GoPro setup vid would be awesome

Thanks for all the information sir...looking forward to seeing more of you voids

That M4 style electric screwdriver Milwaukee has had for-ever!!!! Had one at my first dealership job in 94. Old nicad or nimh I can’t remember but yeah. I opted for the M12 drill driver 2401-20 because I have a pile of m12 batteries.

Another great video, sir! +1 on the GoPro setup tips!

Yes more gopro stuff u a very good job with yours.

Nice setup!!!

Please do a video on the GoPro settings

I love you’r videos! They are super awsome! Telling us all that info! Thanks!

i love the humidor in the background!! a nice relaxing cigar is a wonderful treat now and then... love the videos! keep the great content coming!

awesome video thanks!

Ok best tool for rc racing... real easy... and it wasn’t mentioned BUT it’s here... bar none the best tool for rc racing is the Ryan Harris KZread channel! 😁😉 Love ya man! Learning so much. Love how you focus on Stock 17.5 and 13.5 too. Never stop what you’re doing bro!

Love Milwaukee gear! And definitely do a GoPro video!! 👍👍😃

great video

Love to hear your go pro knowledge for Rc and Moto!

That set bro🔥🔥🔥

Just picked up a Biesner desk lamp for my Yokomo YZ2 build, great idea but Harris making me spend money here!

Dremel Rotory is also essential to cut and modify part's! And for cleaning!

A GoPro video would be awesome. Cool new RC room... A room tour would be awesome too. Keep up the good work your awesome!!!

Let's see that GoPro video!!!

Love to here more about the GoPro use!

You can’t forget to mention the sanding stick along with the tire drill

@RyanHarrisRC

3 жыл бұрын

ur a sanding stick

@nicolisty4658

3 жыл бұрын

The only person that is going to picking on hunter is me Ryan! Lol

Awesome videos and knowledge! Would love a video on go pro settings, thanks Ryan

I love the cigar humidor in the background!

interested in the gopro spects

Someone moved to Sony!!! Looks sharp!!!

@RyanHarrisRC

3 жыл бұрын

Reluctantly but I did it haha They have the video game on lock right now

@lboss5030

3 жыл бұрын

Have you seen the Sony FX-3

Definitely my MIP drivers. Basically the Snap On Tools of rc

I'd like go see the video about the go pro

Love Milwaukee tools!

I’ve been using Milwaukee m12 drill and impact for going on ten years. Its built multiple baja 5bs and a couple fences. Love mine I found 18v to powerful for rc.

TGH rod end installer is a must!!! A GoPro video would be great!!

Yes, do a vid on the go pro set up please

Electric screw drivers are great!

Hi Ryan, Great sharing and I suggested gentle brushes and a chargeable blower which is easy to find on the site nowadays. It helps dust off certain areas ie gearing, ball joints..etc , which cannot afford the powerful blow gun on the track. Cheers

I dig the AJ Catanzaro shirt!🤘🏼

Top 6 tool rc racing ✔ i like your video 👍🔧

Hey Ryan, is there a chance you could say what allen tips you use for the screwdriver?

Yes, do a video on the gopro setup and what you do in post, that'd be great!

I use Makita tools for my job. I started to get back in to RC after a 20 year break. I decided to use only Milwaukee tools for my RC hobby. I use the 4 in 1 12v drill driver for my RC needs. I also will use a Milwaukee Packout for each vehicle that I have and each Packout will have itsʻ own shallow organizer for vehicle specific parts.

Subscribed.

OLFA Cutting board is excellent for cut stuff

Dewalt gyroscopic screwdriver with clutch.this tool is super cool

Mr Harris - after seeing the GoPro demo I used my gopro10 and it's amazing, granted a bit awkward as it's bigger than the 8 but it's so nice seeing where I need to improve and can't get over the POV. Mine has WIFI though so it's great setting record and stop via the phone app :) Fav tool would probably be my AKA wheel wrench that has multi size for the wheel nuts/shock tower nuts. Honourable mentions, Wella soldering iron from my father in law that's probably from the early 80s and Hudy 2mm driver!

Please Please Please do a video on your gopro settings, I have the new gopro and need some help getting right. thnks

Best 2 suggestions are the electric screwdriver and the pit lamp. There is NEVER enough light in your pit. If you go the screwdriver route you need to get some bits. HUDY makes some good ones.

A video on the gopro techniques and settings would be awesome!

Dude. MIP drivers FTW, and +1,000,000 on Milwaukee gear!

Yes to the go pro settings and post tips.

Go pro video!

great setup ryan! Please do a Gopro Video. Greets from Germany!

New rc room? I ask because it looks dope

@RyanHarrisRC

3 жыл бұрын

Fresh setup! I was itching for a fresh vibe

@connorglover2167

3 жыл бұрын

@@RyanHarrisRC i like it i wish my setup looked like that

i like the humidor!!!

It was pretty Cool I got to meet Jason Snyder this weekend at the LSR Ice Breaker race is Sac this last weekend..

...and, love your technical aspect to your vids. It satisfies my OCD approach to r/c/:) How about, a vid going through your Sanwa radios, and the settings you use, with a technical explanation, including practical examples of parameter used, and the what, why, when, and how you use things like D/R, EXP, Ch mixing, ALB, Racing modes, etc. And the Low-Fi soundtracks are killer.

Yep that’s cool How you recorded and why the settings also how to setup your transmitter

Go pro videos would be nice... and more drive techniques videos!

Yep definitely interested in what you have to share about the GoPro

Really interested in learning about the settings you use on the GoPro and how u edit the video thanks

It would be cool to see a video on the GoPro video settings, I really like that idea

I've got the hudy set up board, The ottlite twin power pit light, The Philips adjustable handle screwdriver, same as your milwake one and have around 25 bits I keep in a glasses case, i have hollow tube shape magnets slotted onto my tips to stop losing screws, I use the postal technic gas powered soldering iron stored in another glasses case I use the gopro 8 also as well as my session, and hero black 3 plus, get multiple angles My battery operated dremel is also a must to take racing Oh and my mac pistol grip 6in pliers

Hi Ryan! Please make one testing video whit TS100 soldering iron! Many thanks!

No here to start a fight, I use Makita, you can use whatever brand you like, but everything stated by Ryan in this video, I agree with.

Another great video. I agree with the screwdriver. I have the Metabo and hands down one of the best things I have gotten. If you could make a video on the go pro setting that would be great.. Definitely something I personally would like to do. Do you have a suggestion for something other than a Gopro? Keep up the great work and amazing videos.

Good video. For people that actually use cordless tools everyday, Milwaukee is by far the most popular choice.

Yeah would like to see the gopro setup for racing.

From a guy who built a 1/8th Nitro buggy kit by hand; Get an electric screwdriver. No excuses! It will save you a LOT of pain (my forearms hurt for days to the point I could barely work), time and stripped screw heads/threads. Make sure to do the last turn by hand though. I think another thing that is a great purchase is an entry-level 3d printer. Whether it be shock- or diff-assembly stands, hooks to hang tools, organisers for screws, you name it, they can all be produced for mere cents in terms of material cost.

@RyanHarrisRC

3 жыл бұрын

Great suggestions!

I use the metabo HPT (Hitashi) comes with 2 batteries and a charger works awesome and I’m a person who is a sucker for Milwaukee on my real cars..

while i like those small Milwaukee or Makita screwdriver/drills, I found the Dremel offering a bit better to pack and haul around. No need to fuss with a removable battery and charging base. Great video Ryan. Might put together a video of my own. Also, also...new filming setup is dare i say...DIALED!!!!

Hey Ryan thanks for the video. Im interested in the parts box but your web link doesn't find it.

Hey Ryan they have a m12 version I have been use one for 7 or so years get the brushed version but I don't know if they make a brushless if they do it might be to powerful

Can you do a quick vid on the gopro settings you use. thanks!!!

would love to learn about your gopro settings

Hi Ryan any tips for a b74 i got mine for christmas built it and ruined spur gears because of a cracked pinion

Did I miss the video about the go pro settings ? Also is it possible to make the go pro videos like your action shots of the rc ? I think this would help my lap times but also be fun to make some videos to show family and friends

Yes, please do a video on your GoPro editing. I recently dust off my old Hero+ GoPro. One reason I put it on the backburner was because I had zooming issues. Everything was so far away when it came to track footage. Thanks!

Yes for the gopro video

Helpful vid. Was thinking of picking up the hat clip although I don't wear strap backs and couldn't tell if yours is able to clip onto the back of a fitted while wearing the hat backwards(don't like the clip that mounts to the bill of a hat plus I generally wear them backwards while running. Ide really like to see what settings you use on your gopro 8 black as I only picked one up a few months back but have yet to use it much, although when I did use it I'm sure the settings were tgevreason for why I was not feeling the footage regardless if I was close to my rig or it was far away I just couldn't get the clarity and whatever term is used for describing the "zoom" when shooting both close and from afar using the GPS GP8black. Would def be appreciative if able to take the time to share your camera setup for sure. Thanks man

@rcleesd

3 жыл бұрын

I have the clip for my GP8 and yes, it does work with fitted hats! I don't like snap backs either. I prefer to use the headstrap most of the time though, because the weight of the camera is a but much and not quite as comfortable when filming for 30 minutes or more. Both can work well, but I prefer the head strap mount, on top of my hat, turned backwards for filming. Hope that helps!

Yes! For the Gopro vid.

Great video. Can you please tell me who paints your bodies?

Hey Ryan, I would like to hear about your GoPro settings

I'd like to see a GoPro settings/post video!

Ryan looking for a versatile 4wd buggy. Indoor, outdoor dirt. 1/10 or 1/8 scale? Currently only really run 1/10 scale stadium truck. What is the most versatile and ran at most tracks?

Ryan, These days fortunately a few tracks have mains power but for the ones that don't you (obviously) need to bring your own power supply. Suitcase petrol generators are used a lot as well as leisure lead acid batteries but the former are quite noisy and the latter heavy. I wondered if bringing a portable power station is something which is a creditable option bearing in mind how light they. Do you have any thought please?

The Milwaukee soldering iron uses the same battery as the the hex drill in the video.

In your description I see your 1/10 motors and ESC listed. Could you include in the description/do a video on what you use for your 1/8 eBuggy?

Nice Mark Martin poster there Ryan, I see you

I think it would be cool to see a quick edit on what you bring to the track

Hey Ryan would you mind linking me a link of what wireless charger thing that goes in your m17 I need one for mine and can’t find it because the link in your video of it isn’t there anymore

Does that milwaukee M4 screwdriver put in 2mm bolts without stripping on a low setting? I know the Dewalt has a super light clutch i guess im wondering if the Milwaukee has the same.

I’d like to see something on your travel gear. What do you use to transport everything

I'm a Milwaukee guy as well - but the one area I go yellow is the gyroscopic screwdriver. That feature is game changing, and it's also cheaper (which means it probably won't last as long - but oh well)

sweet shirt. watch the guy also!

@RyanHarrisRC

3 жыл бұрын

Sick!