just came across your page and i’m so excited to start modifying my ve calais, love the information in the vid!

Come across this channel just by chance. 5 mins in you've got a subscriber. Love the content mate! About to order an OTR for my VF

@ClunieGarage

3 жыл бұрын

G'day Nathan, thats awesome mate thanks. Check out all our other videos and lots more content coming soon.

Congrats on the 2000 subs Fred my man, all my mates at school watch you on a rainy lunch time at school when we can’t play footy. We all laugh at you and Frankie and love your hooney nature

@ClunieGarage

3 жыл бұрын

Thanks Zach. You and your footy mates should be focused on homework though and not watch the channel at school 😇😀

That sounded like an absolute beast! Even on idle, Speechless.

@ClunieGarage

2 жыл бұрын

You betcha.

Great work guys. Glad to see you are keeping with no. 9!

@angry9901

3 жыл бұрын

Secretly he always loved the #9 Alan Moffat Coca Cola Mustang.

@ClunieGarage

3 жыл бұрын

G'day Gary, we will def stick with no. 9 - too late now anyways as our cars are all stickered up!

Well nice sound on the ute. Makes me realise why the open throttle freaks me out. I stood next to my L98 aka G8, with cold air intake and cat back exforce exhaust long neck headers and vcm cam and tuned at 350 klw at rear wheels. I luv it, puts a smile on my face. Thanks for video.

Hi F&F - well Kermit the bright green L98 / 2009 /SS manual Ute rolled up today. Seen a little track time in factory finish (but is lowered.) Only 114 K km, seems tight and well loved by the last mechanic owner ( thanks Mick). Planning the usual mods - OTR, Exhaust, tune and then a mild cam down the road a bit. Thanks for all your very motivational vids guys, much appreciated....

@ClunieGarage

2 жыл бұрын

Congratulations on the new purchase mate. We have done several videos on the VE ute modifications including the ones you have listed above. Keep us updated and are you thinking of taking it to the track? Very low kms btw, well done.

@FeickertandCompanyGrattai

2 жыл бұрын

@@ClunieGarage Thanks guys - after watching you two I am developing a bit of a crafty plan. Not all development has been okayed by the Minister of Finance ;-). So might just cruise for a bit until I assemble all the tasty bits, then get stuck in. keep up the good work - cheers

Your presentation of information is great to understand I’m learning so much

@ClunieGarage

3 жыл бұрын

G'day Karen, great and thanks for watching. Hope it was of value.

Honestly the best video I have found for me personally with my VF Commodore SS, definitely going to invest in slapping these into the car

@ClunieGarage

3 жыл бұрын

Thats awesome mate. Check out part 2 of this series where we look at mods between $2-$10k. Thanks for watching.

@Ogdenator94

3 жыл бұрын

@@ClunieGarage yeah I looked at it straight after this one, hopefully get onto Harrop and get a Harrop stage 3 onto my car, engine back exhaust and a OTR.

When I discovered your channel a while back I immediately knew that I needed to subscribe. The amount of thorough and detailed content you guys share with us is so bloody valuable (especially for those of us who are new to all of this). I’ve learnt soo much from your videos and I’m sure many others have as well. Your fun and enthusiastic approach makes it very entertaining and relatable to us common folk. After many years of deliberation I have finally invested in a mint condition VE II SS. The knowledge contained within this channel will be essential to unleashing its wild side 😈 Thank you soo much for sharing your content with all of us! Keep up the fantastic work 🙏😎

@ClunieGarage

2 жыл бұрын

Thanks so much mate and glad you like the channel. Hope you are keeping safe in this covid situation and would love to see and hear more about your VE, bring on the mods and congratulations in securing part of Australia's automotive history. Fred.

@pureroyalities

2 жыл бұрын

@@ClunieGarage Thank you kindly, it means a lot!

@petergranzien2224

8 ай бұрын

😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮😮

What a legend mate. Keep up the good work

@ClunieGarage

3 жыл бұрын

Thanks mate!!

Gday mate, I'm upto the Cam upgrade now, $6k time soon hahaa Grats on the 2k subs btw!

@ClunieGarage

3 жыл бұрын

Awesome, keep us posted on the cam upgrade. Ours is on its way from Mr Tooley in the US and should arrive soon!

Great vid mate! I Just picked up a 2016 Caprice and I’m super keen to get her growling like it should be!

@ClunieGarage

3 жыл бұрын

G'day mate, congrats on the Caprice! A fellow subscriber has one too! What are your plans for the chariot? Make sure you get started with the mods in the video!

@sdeeth

3 жыл бұрын

@@ClunieGarage pretty much everything you mentioned in your video. Would love to get the W375 Walkinshaw upgrade and that would cover all bases. Then lower the big land yacht a touch and I’d be super happy.

@ClunieGarage

3 жыл бұрын

@@sdeeth oh very nice. Check out our MCA coilover install video on our VF to give you some info on lowering and improved suspension.

The little meow was outstanding, immediate thumbs up.

@ClunieGarage

2 жыл бұрын

Haha, classic reference to cat convertors there!

Thanks bro! Just getting to cars at an late age, and this is amazing bro 🤙🏾 cheers

@ClunieGarage

Жыл бұрын

Happy to help!

Holden SS. Took me until I was sixty to buy one. Best car I have ever had, out of the dozen I have owned. The sound (straight pipe), to the feel of the rumble when I hit 200kph. Better then sex, well almost. Great video. I will try some of the mods, thanks.

@ClunieGarage

2 жыл бұрын

Thanks mate and glad you liked it!

Thinking of a top end rebuild of my LS1 ton Vy 🤔 These tips and tricks are handy , thanks 🤩

@ClunieGarage

3 жыл бұрын

G'day Tim, glad you liked them and thanks for watching.

After 12 years in a 300 rwkw xr6 turbo, I finally got a VF SSV. This channel will be of great help with my first V8.....Subscribed :-)

@ClunieGarage

2 жыл бұрын

Thanks mate and welcome to the channel. Lots of ideas here to mod your VF SSV and congratulations on securing one of the greatest Holden's ever.

@dualnamehype

2 ай бұрын

what did you enjoy driving more?

@germanshepherdlover2613

2 ай бұрын

@@dualnamehype The VF ssv is nicer to drive but I miss the Turbo rush of the Barra....I need a cam LOL

Another great video for u vf owners...cheers!

@ClunieGarage

3 жыл бұрын

Thanks Matt!! Glad you liked it mate. Heaps more vids coming soon on the channel as our VF race car build is nearly finished.

Best episode yet! I nearly wet myself when I saw those Nankangs. Black Betty has new shoes!!

@ClunieGarage

3 жыл бұрын

Glad you liked it Pedro!!

Did most of the recommend mods enjoying these videos

Far out! You have a mean setup. Living the dream.

@ClunieGarage

3 жыл бұрын

Thanks Obama!

@bangryman100

3 жыл бұрын

I have the V6 3.6 liter and I would like to get more power. I just have an axle back exhaust. And another thing. I'm looking for the V.I.M. video in motion cable that connects to the rear aux. The one I have turns on the radio display once I go about 5 mph.

Thanks for this great episode !!!

@ClunieGarage

3 жыл бұрын

Thanks Dave, glad you liked it mate.

Love the content Keep em coming👍👍👍

@ClunieGarage

3 жыл бұрын

Thanks mate, will do!!

I mean you can do a cam and tune youself for around $1500-2000....... My advice to most, do a cam 'first' if your a car guy that can and if you know about tuning etc. Dont waste your time on other softer mods..... If you've been around the block, cam and base tune first. Not only that it will look stock all the way around.

Great information and I can apply it to my VN 5 litre. New subscriber. Cheers

@ClunieGarage

3 жыл бұрын

Awesome, glad you liked it mate!

Subscribing. Thanks mate. For anyone who wants to do the above on the cheap, another one (if you have an LS3 with bimodal already) get used hsv headers and midsection of exhaust. 90% of power though comes from the intake a tune

@ClunieGarage

3 жыл бұрын

Awesome, thanks for the sub mate. Great tips also on the used headers. Nice one.

Just subbed, nice video, I have my corvette 76, wife has a nice little M3, and I just picked up a VYSS 2002, cant wait to play with it alittle, long time since I have had a commodore, looking forward to putting in some of these (Its stock)

@ClunieGarage

2 жыл бұрын

Nice one mate and good luck with the mods and thanks for thr sub!

need more vids like these!

Nicely made vid , really useful info . Hold on to yer Holdens Fred and Franky , and maybe do a vid about the rising HSV and SS prices . Sure has changed in the last year , hope spares prices dont rise , reckon they might tho . Cheers , have a great year .

@ClunieGarage

3 жыл бұрын

G'day mate, we certainly will be holding onto our track cars for a long time yet. Great idea on a rising prices video, we will look into that. Thanks again for watching.

@mikepalmer7365

3 жыл бұрын

For what it's worth, here in the States low mileage SSV Redlines..erm....Chevy SS's like mine are now selling for 10k USD more than I bought it for. Of course there's a rarity factor here since only a total of 14000 units were allotted from 2014-2017, but I think it's a good trend. That said, I love the channel. I subscribed the first time I watched a vid. Keep up the great work!

Ff to now, gizzy gone, v8 supercars in turmoil. Thanks for the mods. I have a 2006 L98 with only 100 thou on clock . Has 3" xforce full stainless system bolted to pacemaker headers ,can remove rear quad tips and fit dump pipes when I'm feeling racy. King spring suspension feels perfect I'm 69 and still lovin it. My SS is for sunday drives not daily drive. Will do the intake next. Thanks again, subbd.

Thanks for the video!

Hi Clunie. Thankyou for sharing these videos and your knowledge! I have learnt stacks from watching. This is a bit of a journey for me. I am learning about cars (internal workings) and would like to buy a manual VE II V8 Ute (eventually). I need to learn how to drive a manual first so will start with a learner.. then get a little mazda 3 SP23 😅 its been good to see what mods to get and what not to - Im in my early 30s .. not interested in attracting the johnny hoppers! Hope youre well and looking forward to more content! Jack

@ClunieGarage

11 ай бұрын

Thanks for watching Jack. Best of luck tracking down a ute. Great investment going forward and platform for a lot of fun.

What a cool video! Very well explained.. Mate I would really appreciate if you can suggest some performance upgrades for Mazda 3 2014

Great video for a newbie SSV Redline owner...THX

@ClunieGarage

9 ай бұрын

Glad it was helpful!

Best and first mod for a manual should be a short throw shifter. Being one of the most high use items in the car, making shifting a manual better should be number 1 on the list. Then after that, intake, exhaust and tune. But each to their own.

@ClunieGarage

2 жыл бұрын

G'day, yes we have the rip shifter fitted to our VF. Awesome mod!

Bro you were amazing. Seriously

@ClunieGarage

Жыл бұрын

Thank you so much 😀

Great video keep it up !

@ClunieGarage

3 жыл бұрын

Cheers, thanks Roger!

I spent less than $400 on a second hand 3” pipe and headers on my LS1 Stato. $1500 on the OTR and tune. $150 on second hand HSV Bilstine shocks with springs.

@ClunieGarage

3 жыл бұрын

G'day Julian, nice work and you will have some spare pennies for some sticky tyres now!

great video no bs love it keep it up

@ClunieGarage

2 жыл бұрын

Thanks mate, glad you like it! Make sure you sub for our latest updates and videos.

Awesome info bro Thanks heaps

@ClunieGarage

3 жыл бұрын

G'day Hamish, glad you liked it and thanks for watching.

That ute sounded mental, my E2 senator ls3 auto makes 287.5 rwkw But the torque is 706nm

@angry9901

3 жыл бұрын

Love the E series Senator, they look very posh. Would sound great with a decent cam.

@jacklea7931

3 жыл бұрын

@@angry9901 I’m part way through purchasing my parts for the cam.

@angry9901

3 жыл бұрын

Great news, I hope you post a vid when you are done.

@ClunieGarage

3 жыл бұрын

G'day Jack, yes she is a tad wild. You should hear it honking down the straight at Wakefield on full noise! Lets you know you are alive!

@TheBraddles82

2 жыл бұрын

@@jacklea7931 has your Senator had any work done?

Wow, thats good power at the wheels from otr, exhaust and tune

@ClunieGarage

3 жыл бұрын

G'day David, yes we were pretty happy with the results.

Great tips, legend

Some great tips.. really interested in the first 3 on my 07 calais v. Thanks for the video

@ClunieGarage

2 жыл бұрын

Thanks mate, hope they help and make your car better!

Sick vid mate

@ClunieGarage

3 жыл бұрын

Cheers, thanks mate, hope it was helpful.

I love your list, couldn’t agree more with the intake and headers, they are the biggest let down on performance of the commodore. I also think a diff ratio upgrade is also a good budget upgrade as well as helical centre is a good idea if the budget can stretch

@ClunieGarage

3 жыл бұрын

G'day mate, yes diff ratio-new gear set is another mod but from my experience is typically more than $1k. We were lucky with our VE as it came with a Harrop Tru track fitted and our gears are about right for circuit racing.

@creedk1516

2 жыл бұрын

What gears are you guys generally running, I’m looking into getting new gears but don’t know weather to get a 3.45 or 3.27. It’s for a Pontiac g8, ve commodore

@Aidoz_Garage

2 жыл бұрын

@@creedk1516 as for me I’ve got 3.45 rear end, first gear will be short but acceleration is noticeably better all round

@simonainscough619

2 жыл бұрын

you then need a good stereo, the drone off the headers on mine is unbearable mine also had a single 3inch exhaust great noise just nowhere to fit it once the car has been lowered. huge problem with the v8s is lack of real estate under the bonnet and everything gets to hot bonnet scoops alamonaro for my next mod

Good little overview, keen for the next episode

@ClunieGarage

3 жыл бұрын

Thanks mate, glad you liked it!

I have an VN89 APV group5i. All still stock, still goes well.

@ClunieGarage

2 жыл бұрын

Ah nice one mate, make sure you keep it forever!

Those A9X canvas banners!!

@ClunieGarage

3 жыл бұрын

G'day, check out House of Muscle if you like them!

Just stumbled upon your channel. All really good mods! Last had my Commodore many years ago. Tip for others, If you just want to go quicker in a straight line, cheapest mod I did was to put really small wheels on the rear. I put 14inch steels (185/55) on the rear. Gives you a 10% quicker final drive. Looks stupid, is dangerous, tyres are way too small for the car, and in a hard stop, you wont stop quickly, and the ABS goes nuts. But for $50 off gumtree it will definitely give you a small but noticeably increase in acceleration. Again, its pretty dangerous to drive on the road with undersize wheel and tyre! Unbeatable performance mod, in a straight line anyway. Definite ghetto mod lol

Loved hearing it sing on the dyno. Not quite a SB2.2, but still sounds good from the General. Where is your 427 Chevy SS?

@ClunieGarage

3 жыл бұрын

G'day Tom, the VF is stripped bare and getting a fuel system at the moment. More updates coming soon.

Thanks guys 👍🏾

It has me stumped how you don't have at least 100,000 subscribers. Must be time to take Clunie around the V8 supercar events, while running a blog, and selling some merch. The quality of content is one thing, but then there's the humour and production quality too. Onwards & upwards...

@ClunieGarage

3 жыл бұрын

Thanks for your kind words and feedback mate. We are going to keep growing the channel with new and authentic content over the coming months and years. If we get to 100,000 subs that would be awesome. We have plans on going to events and selling merch so stay tuned.

@ashjackson7

3 жыл бұрын

@@ClunieGarage Great to hear. I have had a pretty stock 6.0L VF Calais V for over 2 years now, however, after watching your Top 5 enhancements under $2k each, needless to say the old girl won't be stock much longer. Got OTR CAI, and soon to get DOD delete, a new cam, and full exhaust system. Thanks for the great advice.

@ClunieGarage

3 жыл бұрын

@@ashjackson7 oh very nice. Check out some of our previous videos on the channel as we have how tos on the otr install, DoD delete and exhaust fitment. Looking forward to hearing how the mods go!

@ashjackson7

3 жыл бұрын

@@ClunieGarage Yeah, I've already watched all of them, hence the decision to do an end to end upgrade. I'll send you a before and after once it's done. Cheers Fred.

Mate that green VE sounds a treat 👌🏻. I really like the hardtop cover on the back tidy as!! Where can I find one like that?

@ClunieGarage

2 жыл бұрын

Cheers, thanks mate. We got the hard top cover off FB marketplace!

Thanks for the video Im my case having a charged GTS the costs can explode. With the cam going in next month and chiller thats another 6 grand , then need to start thinking about fuel pumps . Anything over 700hp in a GTS needs a upgraded fuel pump .. They are around 4 grand . Also thinking of going the 2650 LSA blower , thats another 7 grand Thankfully im single haha!

@angry9901

3 жыл бұрын

Go Curtis, love to see 600rwkw out of your GTS.

@CurtisLSA

3 жыл бұрын

@@angry9901 Thanks Check out my channel for the video on it in the next month or so

@ClunieGarage

3 жыл бұрын

G'day Curtis, you betcha as soon as you head down the forced induction path, things quickly escalate. Give me a shout if you need advice or options when selecting your cam and the 2650. Our new fuel system is on its way from the US and will be installed in coming weeks.

@commoncentsclub8807

3 жыл бұрын

That's why I'm thinking of going killer boost inlet and turbo on my old VT SS ls1. More cheaper options to play around with. 5.3 iron junk yard truck blocks etc. I'll do most myself also to save few bucks. Fuel? I think Ill just put a 540 pump in the standard tank and run a relay for now. Quick and easy...Pro charger is another option.

@petecotter6790

3 жыл бұрын

Don't disregard the standard 1900... upgrade cooling of the charger and can make big torque and can get really good trap times

great video, I think the brake fluid was drastically understated in the video though, seemed to be relegated to "if you can afford it"... if you can afford T3's you definitely can afford some RBF 600. especially if you plan on hitting the track (brakes are pointless if you boil the fluid 3 laps in at Sandown). Not trying to start arguments, just thought the fluid and pads should have been the main focus of the brake upgrade. really good stuff though you just got a new subscriber. just trying to add constructive criticism, no hate

@ClunieGarage

3 жыл бұрын

G'day mate, great points and I should have made it clearer about the importance of fluid. My reference to affordability was actually about the braided lines. We have done a whole episode on changing brake fluid and fitting braided lines on the channel. Thanks for subscribing mate and keep an eye out for our latest track day episode in the coming days.

@angry9901

3 жыл бұрын

Got to love that Penrite 10 10ths brake fluid.

That’s why I like Ford’s more because the the air box it easy to remove but Holden’s are pretty good I wouldn’t mind a v8 Holden but a 80s Vc commodore

Hay mate I’m a ssv redline v8 owner and would love if you can do a video on the 2015 model wheals Tyers and big dice brakes

@ClunieGarage

3 жыл бұрын

G'day, we did do a video on the standard VF tyres as part of our track tyre review. See the attached link if you are interested. kzread.info/dash/bejne/hGGoo7VxgJrSpKQ.html

G’day mate, I recently had a Harrop otr installed on my VF. Have you guys found a easy way of removing the spring clips? Maybe a how to vid? Cheers

Great video mate, appreciate the effort. Just a couple of questions, do you think it would be worth tuning and supercharging an SV6 (VF 2016 Black edition)? Was thinking about throwing in an otr and maybe a varex exhaust as well. I probably don’t have any intention to get an ss so do you think the whole process mainly the tune could be worth it in that case. Thanks in advance and love the vids👍

Number one mod, new timing chains for the V6.

As a SS owner if you got the money for OTR, exhaust I’d just go cam as well aha that’s what I did and never regretted it, 370kw

@ClunieGarage

3 жыл бұрын

G'day Zane, our thoughts exactly and check out our latest video. kzread.info/dash/bejne/ZWx2wcxwgdzbgs4.html

New and still learning about cars as I've recently found a big interest in them. Does this guide apply to a VE SV6 aswell as the v8. Particularly for someone beginning a project and looking to slap a supercharger under the hood as the end goal

@Mephiston

3 жыл бұрын

Should do, its still input and exhaust tuning and flow. Wont have as big an effect (wont put out 280KW), and still needs the tune, but it will make some difference.

@DarkDaze666

2 жыл бұрын

OTR, exhaust and tune should put you at around 200rwkw. Standard is around 160 to 170

@DarkDaze666

2 жыл бұрын

If you go a supercharger kit, including the exhaust and OTR etc, you can theoretically see up to 300rwkw

@isaacbowey9944

2 жыл бұрын

Just make sure you take it to a dyno to find what it needs done. Might cook your car if you don’t and will likely lead you down the right path for more power

Thx, great vlog for those looking at starting modding, But did Nang Kang become a boutique tyre lmao I bought them once but chewed threw them very quick my opinion is your better off just buying a set of Bridgestones or Pirelli not only do they have way more grip but they last five times as long so they pay for themselves. I put a set of Bridgestone RE-11s on the VZ Monaro and it’s night and day compared to Nang Kangs

@ClunieGarage

Жыл бұрын

G'day, we recommend Nankang semi slicks for track day usage as a good cost/value option. For every day usage, Bridgestone RE003s and Pirelli P Zeros are worth a look.

Need aftermarket ECU for tune after OTR intake and exhaust? 2008 VE V6 here with OTR in now and 2.5 twin cat back about to go in. Running Pentrite HPR5 doesn't miss a beat. Regards, Jas. Rockhampton Queensland

@ClunieGarage

2 жыл бұрын

G'day Jas, you won't need an aftermarket ECU. Factory one will be fine and this can be tuned. Nice choice with Penrite!

Ultrex nex eshaust is at that price, and i highly recomend them, run it on my ute and it shits all over the weak xforce that i used to have

@ClunieGarage

3 жыл бұрын

Nice one mate, we have never heard of them.

Also i have worked out the aftermarket averages per 10KW gain its $1,000 dollars which includes labour and cost of upgrades, so if you want around 50 extra Kw at the engine its going to cost $5K its that simple or put a cam and OTR full exhaust and tune and its around 8 to 10K depending on items used and who does it? So add the labour and tune costs and the OTR is going to cost you 1,000 all up cost of otr and in fill panels and then the tune?

i do need an otr. my ssv ute is currently making 320rwkw with the standard intake setup.. just got a cam, extractors, twin 3 inch exhaust and tune

@ClunieGarage

3 жыл бұрын

G'day mate, yes a otr would work nicely with the mods you have already made.

thats pretty awesome power. My ls2 only gets 300 rwkw with a 232/236 112 cam but I do get 675nm of torque

@ClunieGarage

3 жыл бұрын

Thanks mate, yes we were very happy with the results. Our tuner is also pretty handy!!

@bennymac2997

3 жыл бұрын

What was your stock dyno numbers tho?

@ClunieGarage

3 жыл бұрын

@@bennymac2997 G'day Benny, we showed the power level prior to the tune on the video and from memory it was 238rwkw. Unfortunately, we didnt have a power level reading prior to fitting the otr, exhaust and headers though.

@bennymac2997

3 жыл бұрын

@@ClunieGarage Yep seen that but my question was for @Malcolm Henham

@Madmalchen

3 жыл бұрын

@@bennymac2997 it' was 235 rwkw with otr and exhaust then 255 after tune. It never got tested std. Cam and headers gave me 45 rwkw to take it too 300

good effort that shows the potential of the l.s. crackle and popping shows a lean condition or did the tuner do this on purpose ?

Doing the 10-$15k mods next

Can these mods be applied to a statesman for the most part? What air intake should i get for a 2007 wm statesman if so? :) thanks for these vids! Im interested so much now i have time...

The 1,100 likes on this video are the guys that race their commodores down my road, and honestly... *I wanna join em*

@ClunieGarage

3 жыл бұрын

G'day mate, join them!

how about the walkingshaw 1/2 a u pipe which contacts directly to the MAP sensor and the intake on the engine, still cheaper than a VCM or OTR, as the engine light will come on and you really need to get the ECU tuning done, but with out the VCM otr and just a walkingshaw intake you dont have a engine light and get at least 10KW extra with out the tune, with a tune around 20KW? But all tunes range from $400.00 to about 600.00 depending on who does it?

@angry9901

3 жыл бұрын

Who is doing tunes for $400? Workshop rates must be very low.

So jealous, have a 2008 Calais V6 for over 5 years, great car easy to get speeding fines if not careful. But sluggish off the mark, 1st upgrade would be trade in for a V8 but live on a dirt road and no garage I park on dirt/mud. Last car was a 2006 Omega and found on nearby creek crossing (50m from home) air intake in bumper, hydrolocked oops. Insurance paid more than I paid for it :D. Over radiator intake does seem a good idea but is an air filter included with that? Might be best to keep stock but after having manual trans all my life auto is so boring, although my (damn should have kept it) HQ Stato was auto. Going to keep my Calais, great comfortable car good for country roads and is an Aussie made Holden.

@ClunieGarage

2 жыл бұрын

G'day mate, yes an otr will come with a specific air filter inside it.

G’day fellas. Keen to see what you are going to do regarding brake ducting on the VF? I had a Redline that I tracked a while ago, picking up another one this week. Could never quite find a way to route the ducting from the fog light cavities back to the centre of the disc. I have seen the Production 3E Redlines do this, but not sure how. Keen for your thoughts, and actually doing it? Thanks in advance!

@ClunieGarage

3 жыл бұрын

G'day Joshua, we are really interested in that too. We are fitting brake ducts to the VE at the moment and hopefully we can learn a few things for the Redline. How did you manage to pick up another Redline in this hot market? Well done!!

Keep an eye on that otr, looks like you've got the series 1 from vcm. They were prone to leaking, they changed them a few years ago. They new ones have about 5-6 clips holding the front half to the back that goes to the throttle body now.

@ClunieGarage

3 жыл бұрын

Cheers, thanks for the heads up mate. Will keep an eye on it as it is the VCM model. We have the harrop otr fitted to the VF.

@SS6.0l

3 жыл бұрын

@@ClunieGarage My vcm leaked so I bought a Harrop ( 2 piece with clips.)

@mrclown7469

3 жыл бұрын

Was about to post the same warning. Definitely stay away the older VCM OTR's without clips. If I were to buy new I'd go Harrop because the metal U clips they use are impossible to break, whereas the new VCM design uses plastic tabs as clips.

Whats your thoughts in Ramjet 3 OTR? Im having a hard time choosing between this, VCM and XAIR. Dont care about aesthetics just the performance. Thanks in advance

just wondering if the intake filter will fit a 2009 ve commodore international and if so could you point me in the right direction to one?? love the vid

@ClunieGarage

2 жыл бұрын

G'day mate, not quite following your question. Would love to help out, can you please rephrase?

The nangkang AR1 is a beast of a track tyre I find it comparable to a toyo r888 or Yokohama ad08 and it’s better value for money and longer lasting - since upgrading to my 6piston conversion I can’t run an 18 anymore and the Ar1s don’t yet come in an appropriate size combo on 19s

@ClunieGarage

3 жыл бұрын

G'day mate, yes we highly rate the AR1s. We just bought 275-35-19 and 245-35-19 in the AR1s for the Nascar ute. What combo size 19s are you after?

@ssidewayz

3 жыл бұрын

Clunie Garage I have been waiting on an appropriate front size - they previously only did a 255/40 r19 which was a bit blocky and slightly oversized for the front - if they have a 245/35 I’m in the game!

@ClunieGarage

3 жыл бұрын

@@ssidewayz G'day mate, get there! I have just bought the sizes listed above and fitted to the original VF Redline staggered wheels - all good and we will make a video on it on the weekend.

Great video, I have a SS L77 engine, With AFM . I have deleted the AFM off , is it simple for me to add headers or do I need DOD delete kit to make it work?? Cheers in advance..

@ClunieGarage

3 жыл бұрын

Hi Nick, when you say you have the DoD delete, have you removed the old valley plate and the spring lifters? You wont need to do anything to the headers or exhaust

Quick question I have a ve ss with Otr and 3 inch exhaust but no headers and no tune would I have more power still with out a tune or could I still get it tuned without the headers for more power or are they essential. Cheers mate

288 RWK on that green ute, it sounded like it had a cam upgrade? My SSV put out 284 RWK with same upgrades except no cam upgrade, but has cats removed.

@ClunieGarage

2 жыл бұрын

G'day, no cam upgrade on ute as yet. Only otr, headers, exhuast and tune - the tune has over run in it amd thats why it sounds like it has a cam 😛

Got some kingdig it exhaust cut outs 3inch for two and that cost 1k Inc shipping.

@ClunieGarage

3 жыл бұрын

That will work as well! 😀

How good is the integrated headers in the LFX motor used in the VF SV6?

Hey Clunie, don’t know if you remember a good few months ago I told you about my VE SSV Special Edition that had stuffed lifters. A week ago I had VCM put all 8 new lifters in and they also found a bent pushrod. They also put in a new cam. They disconnected the AFM and also put in a cold air intake system then retuned it. It’s now got an extra 32.4KW. It all set me back $5000. Would love to put in an exhaust system to give it a nice sound. Nothing too loud. I don’t want something cheap and nasty. VCM quoted me $4400. I haven’t done anything about it yet and really didn’t want to spend that much.

@ClunieGarage

2 жыл бұрын

G'day Clemmo, yes I remember and well done on fixing your lifters and sorry to hear about your pushrod! In terms of an awesome exhaust to match your new cam mod, I can't speak highly enough of the DPE mild steel systems. They are now made by Manta as DPE sold the business. A twin 2.5 or 3" mild steel system, coupled with ceramic coated headers in 1 and 5/8s or 1 and 7/8s, will make your VE sound awesome!!

@MrClemmo13

2 жыл бұрын

Thanks so much for that info. I’ll definitely look into it.

Thanks for the video 👍🏼im in North brisbane who should I go see please to do some work on my beast please.

@ClunieGarage

2 жыл бұрын

G'day, I am not too sure as I don't have personal experience in Brisbane as we are in Canberra. I think Tekno Performance are in yiur neck of the woods and they seem to be a very reputable tune shop and do lots of Holden mods.

@The.Goddess.Empire

2 жыл бұрын

@@ClunieGarage tha k you hun have a great weekend 😉👍🏽

Just upgraded my WN Caprice brakes to DBA T2 with DS Frodo front pads and Bendix Ultimate rears. Definitely better!

@ClunieGarage

2 жыл бұрын

Well done, nice mod and we just covered this in our recent mods video.

@scottcoulter2751

2 жыл бұрын

@@ClunieGarage Yeah that's why I bought them, Because of your recommendation 👍

Can i change filter and exhaust without mapping? I know wont run at his best but it will work fine or not?

yes

probably a stupid question, but would running 285kw with the first few mods be legal for a P plater?

My VF SSV 6.0 AFM has a stock exhaust system except for 2.5" higher flowing Zetti rear mufflers. I don't really like cars to be too loud or drone. What kind of power level can I get from an otr and tune without upgrading the exhaust? Can I run a mild cam on stock exhaust or would I have to go up to a 2.5" or 3"? (I think stock is 2.25")

@ClunieGarage

2 жыл бұрын

G'day, we ran a video about a year ago that profiles our dyno results from the stock, Walkinshaw 310 pack ( includes OTR, exhaust, tune) and then finally our supercharger. Results from stock can be 10-20rwkw with otr and enhanced tune but I would recommend headers and exhaust for full benefit.

Semi slicks are ok for daily driving? Everything I have read has said semi slicks are primarily for race days? I have done all your other recommended upgrades on my VE Calais, just contemplating the tyres.

@ClunieGarage

2 жыл бұрын

G'day mate, definitely not for a daily driver. Try some Michelin Pilot Sport 4S or Bridgestone RE003s for daily duties.

does the catch can on that green ve work? It doesn't seem like the port on the back of the intake would have much vacuum.

@ClunieGarage

2 жыл бұрын

G'day, yes it does now. Check out our latest video and we have now plumbed it correctly.

Agreed on brakes, new shocks and swaybars go along way too could be done for around 1k. Are you going to do them on this Fred possibly? I would ditch the otr and just mod the airbox. Put that money towards 3.73s in an auto and 4.11s in a manual. Anything less is just a dog along the east coast. Especially if not tracking and could leave off slicks too.

@ClunieGarage

3 жыл бұрын

G'day Dan, we are about to fit BC Racing coilovers and will do an episode on these $2.2k. We will probably do sway bars and linkages at the same time. You could also mod the air box if you wanted to. Slicks are a considerarion for tracking the car.

@Dan-rg7jj

3 жыл бұрын

@@ClunieGarage Look forward to the motor going back in!

Hey clunie, I have a VE R8 clubsport, and I'm near Canberra, where would you recommend getting performance work done on it?

@ClunieGarage

2 жыл бұрын

G'day mate, we get all our tuning and race mods performed at GenTech Performance Automotive in Mitchell. Give Marcus a call and tell him Fred from Clunie Garage sent you for mates rates!!!!

Mate poor Slade, he was looking good...

@ClunieGarage

3 жыл бұрын

G'day mate, I know he was going so well too!! Apparently he hit neutral and then dropped down two gears and it just slid. Fair old shunt, looked like a broken man afterwards. Poor fella.

@angry9901

3 жыл бұрын

Had a little tear in my eye too, he had done such a great job in the Mustang. Missed him in race 2 and it is a very hard place to pass. Take the aero off those race cars!

Can I assume the same mods would apply to my 05 VZ with a LS1? Only 190,000 kms on it.

@kevinobrien4155

3 жыл бұрын

Yes, though the ls1s heads dont flow as good as the rectangular ported heads found on the l76 77 ls3 so the gains wont be as big. But you'll still gain

Slots rotors, left or right any problems? I bought T2 DBA with slots , not doing yet , just confuses.

@ClunieGarage

3 жыл бұрын

G'day Timmy, no problems so far with the slotted rotors. We have T2 rotors on the Getz and they work fine.