Yes, kind of accurate. 2 months ago I had a 1 hour 'long' interview at a multinational company and for me the questions were the following (I will list any, including the ones in the video): 1. What kind of industrial communication protocols do you know? Tell me something about them. (ModbusTCP/RTU,PROFINET,PROFIBUS,etc.) 2. What is the difference between PROFIBUS/PROFINET? What component is needed to PROFIBUS, how and why we use it? (resistor at the end of the bus) 3. What are a 5 PLC languages widely used? (IEC standard) 4. Write an easy PLC program in the language you prefer. (I dont remember correctly but they tested if I could use S,R,Timer,NO input,NC input, Relay output,positive and negative edge detection correctly.) 5. Tell me about the OB blocks of a PLC (OB1, OB100,..) 6. There is a sensor, you could use voltage or currect signal, what would you prefer and why? 7. Difference between 0-20 and 4-20 mA. 8. Widely known PLC manufacturers

@realpars

4 жыл бұрын

Thanks for sharing that with us, Barden!

@luisacosta7726

4 жыл бұрын

Ee

@vishnukr8010

4 жыл бұрын

Can u plz share me the answer of 6 th qsn exactly

@oscarwilliams2316

3 жыл бұрын

i assume this was for an advanced apprentice or job interview, not a level 3 interview? thanks

@NiravVihaan

3 жыл бұрын

@@vishnukr8010 Current signal is more preferred over Voltage because Voltage will be lost over increased distance which is not the case for current.

this is why i really love this video... I'm jus an industrial motor control technician at my work.. and now.. I'm getting further on with automation job..

I really appreciate the steady volume and calm, clear voice in this video. Thank you for the information. I will listen to this several times while driving a tractor trailer vehicle carrying cargo across the nation. 🚛

@realpars

8 ай бұрын

You're very welcome!

Get back and every thing in this video still excited.

in one year i´m going to need these 2 videos again. Thanks

@bigbama598

6 ай бұрын

How'd it go?

Amazing video as always, keep up the amazing work. Many thanks to you and your team.

@realpars

4 жыл бұрын

Thanks a lot for your kind compliment, Mangani! We are always extremely happy to hear such positive feedback! If you ever have any questions, feel free to reach out to us. Happy learning!

Thanks Realpars! Keep it up🔥

@realpars

4 жыл бұрын

You are very welcome, Zubair!

Nice...I always wondered why 4-20mA was preferred over 0-20mA, now I have the answer. Thanks!

When my work (a manufacturing site) held interviews looking for a Automation Project Manager, I was amazed that none of the interviewees could not answer basic questions like: "give me an example of a project that you lead to implement a PLC control system?", "when working in a blue chip team how would you influence others to make your project their focus to achieve your goals?". The interviewees were more interested in being technical about signals and coding, rather than basic team skills.

@Sundareswara_Nathan

10 ай бұрын

You referred "Signals and coding" here... Will you explain little bit more about it. I am seeking for APM post. It may be much helpful to me in my preparation, sir.

Awesome Video, Thank you so Much. I’ve watched more Than 20 videos from you guys, all of them very didactic, practical and easy to understand. You guys are doing a great job. 👏🏻👏🏻👏🏻

@realpars

2 жыл бұрын

Glad you like them! Thanks for your support, Juan

Thanks for this. This makes me much more confident for my interview. Glad I knew all of these.

@realpars

Жыл бұрын

Glad it was helpful! Best of luck with your interview!

You are tremendously helpful for automation workers. Thank you!

@realpars

2 жыл бұрын

Thanks a million, Asd! That's a huge compliment.

I thank you deeply RealPars for creating these 2 parts videos about job interviews, I'm currently preparing myself to apply for an amazing job on the industrial control field, I also share your videos so your channel would continue growing.

@realpars

3 жыл бұрын

That's amazing! Keep up the good work, and all the best of luck with your job hunt!

I've dabbled in automation for years as a maintenance technician, but that first question would of sunk me right off the bat! :D

@alexanderb.7899

Жыл бұрын

Same here. Senior Automation Engineer in control programming, 17 years of experience. If they would ask me that during the interview I would tell them to go see Wikipedia. :)

@NathanKabler

4 ай бұрын

i know 4 of the 5 🤣

I've recently taken the past 6 months to learn controls and automation, and I'll start applying here shortly. Thanks for the possible questions!

@realpars

2 жыл бұрын

Great job! You're very welcome, and best of luck with applying!

Thank you Real Pars! It was very useful. I am not clear with grounding part in 2W/3W and 4W

@shivaprabhu.s.havinal6276

4 жыл бұрын

Can you please explain grounding part in 2 wire,3 wire & 4 wire configuration. Thank you in advance.

so well explained and high quality, I will definitely invest in your paid courses. thank you for the value provided please keep going :)

@realpars

2 жыл бұрын

Thanks a lot for your support, Billy! Glad to hear that. Feel free to reach out if you have any questions along the way. Happy learning!

I just want to say thank you for each and every videos you help me alot 😘

@realpars

Жыл бұрын

You are so welcome! We're happy to hear that, Usman!

Thank you.... This is much useful for next interview 👍

@realpars

4 жыл бұрын

Great to hear! Best of luck!

very useful and understanding

Thanks. This channel is amazing. Thanks!

@realpars

Жыл бұрын

Glad you enjoy it! Thanks for your support, Omar

Great Video! Thanks!

@realpars

4 жыл бұрын

Thank you!

much needed creator(s) thanks

@quickworldautomation5463

4 жыл бұрын

kzread.info/dash/bejne/nY6jr6pmYdHTd84.htmlsub_confirmation=1

Thanks #realpars for the wonderful work.

@realpars

4 жыл бұрын

You are very welcome, Usman!

This is the best video i have ever seen ❤❤

@realpars

3 жыл бұрын

Glad to hear that, Pravin! Happy learning.

ThankYou RealPars .. Nice video

@realpars

4 жыл бұрын

You are welcome!

Thank you very much. This is a very useful video.

@realpars

4 жыл бұрын

Great to hear that, thanks for sharing!

Thank you, this is great.

@realpars

3 жыл бұрын

You're very welcome!

Excellent video RealPars, this will be my work in the future.

@realpars

4 жыл бұрын

You are very welcome, Hector! Happy learning.

@quickworldautomation5463

4 жыл бұрын

kzread.info/dash/bejne/nY6jr6pmYdHTd84.htmlsub_confirmation=1

Thank you so much. Means a lot

@realpars

2 ай бұрын

You're very welcome!

Thanks a lot for this.

@realpars

4 ай бұрын

Our pleasure!

I'm from UK. Nice channel for Industrial Automation infos

@vishnukr8010

4 жыл бұрын

Hi bro I'm planning to study MSC automation control in uk.. May u please share ur whatsapp number

Thank you so much sir, for amazing simplified explaination important concepts.

@realpars

2 жыл бұрын

You are most welcome!

From Bangladesh -- I love you Real Pars....!!!💟💟💟 Thanks a lot from my deep soul....!!!💗❤❤❤💙💛💛

@realpars

3 жыл бұрын

Thank you, Ali!

Thank You for this Video its very Helpfull...

@realpars

3 жыл бұрын

You're very welcome, Sundar! Glad to hear that you found it helpful!

Superb video

Thank you for this wonderful video

@realpars

3 жыл бұрын

You're very welcome!

Very good refresh program

Wow. That's interesting! Thank you. I'm a Procurement and Supply chain professional and this is very useful. Thank you

@realpars

5 ай бұрын

Glad it was helpful! Always feel free to reach out if you have any questions or concerns.

I wish you all the best. I will share this channel on some sites

@realpars

4 жыл бұрын

Thanks for your support, Abbas!

Basic but challenging interview question. Thanks

@realpars

2 жыл бұрын

Most welcome!

nice info. I regularly follow u guys, u so helpful

@realpars

3 жыл бұрын

Thanks for your support! Glad to hear that.

Good Information with answer

This Video was awesome the animation answer are really helpful and let me understand the answer clearly! Thanks for Sharing this Video

@realpars

4 жыл бұрын

That is great news, Maria! If you ever have any questions, always feel free to reach out to us - we are more than happy to help!

@quickworldautomation5463

4 жыл бұрын

kzread.info/dash/bejne/nY6jr6pmYdHTd84.htmlsub_confirmation=1

I found the Q/A in this video helpful from a learning standpoint nevertheless for an interview. Whether it may be easy or not it does give you a line of thinking to think of question wise.

@realpars

4 жыл бұрын

Thank you, Ardent! Happy to hear that you found it helpful.

@quickworldautomation5463

4 жыл бұрын

kzread.info/dash/bejne/nY6jr6pmYdHTd84.htmlsub_confirmation=1

Thanks you for real pars very useful video again 100 times THANK you.

@realpars

2 жыл бұрын

You're more than welcome!

Thank you very much for your kind support 🙏

@realpars

3 жыл бұрын

You're very welcome!

I love you REALPARS

@realpars

4 жыл бұрын

Thanks for your support!

Very good video!!

@realpars

4 жыл бұрын

Thank you, Marc!

Hello RealPars, could you do this kind of videos more. Right now I've finished bachelor in "Automation and Control". And I really appreciate what you are doing on this channel. Looking forward to see videos like that🙂👍

@realpars

4 жыл бұрын

Thanks for your support, Kalybai!

@mohammednavaf9152

4 жыл бұрын

Haaii. Iam from kerala, india. Iam a EEE DIPLOMA Student. Can i take bachlor in Automation? Or can you suggest a course to study A&C. 😊

@abdulazeez1987

2 жыл бұрын

@@mohammednavaf9152 Btech in mechatronics

So good

Thanks

Always simply superb 😍

@realpars

4 жыл бұрын

Thanks a lot!

Thanks for this guide, im actually going later an interview in automation engineer.. i hope i got this!

@realpars

10 ай бұрын

Glad to hear that, you're very welcome! Best of luck with your interview!

very usefull video

Thank You for this very useful video if not for this we're not going to improve our knowledge.

@realpars

3 жыл бұрын

Glad it was helpful, Joehanes! Happy learning!

Very nice sir

Thankyou, please make more such videos

@realpars

4 жыл бұрын

Happy learning!

Thanks for your video! I'm Lead Automation Control Engineer from Ukraine. My experience shows that in Ukraine most popular PLC are Siemens, Schneider Electricctric and Mitsubishi. I/O module are Siemens, Schneider Electric, Phoenix Contact and few WAGO). SCADA are WinCC, Citect SCADA ,Wonderware and Trace Mode.

@mhommadhassan2482

4 жыл бұрын

can u put ur whatsapp num to Discuss to you?

Expect more👍

tnx for all of this informations I'm from Iran and some topic like this helps me to improve my soft skills

@realpars

2 жыл бұрын

That's great to hear, Mehdi!

Thank You Your information

@realpars

2 жыл бұрын

Our pleasure!

Terrific..

Thank you

@realpars

Жыл бұрын

You're welcome

that's a very interesting video. and it would be quite useful for me to transfer to the other company. thanks for your contribution to creating that kinds of videos 😊😊

@realpars

Жыл бұрын

You're more than welcome! We're happy to read that.

According to this video I am ready.. Thanks realpars

@davebennett5069

4 жыл бұрын

this video is the equivalent of making sure you have a pulse. very foundational questions. you need to know these things in order to even begin discussing other deeper concepts, but know that the ability to acquire information / answers is more important than already having them!

Thank you so much This video was beneficial for me.

@realpars

4 жыл бұрын

Great to hear that! Happy learning.

@quickworldautomation5463

4 жыл бұрын

kzread.info/dash/bejne/nY6jr6pmYdHTd84.htmlsub_confirmation=1

@ajazquddusi8586

4 жыл бұрын

@@quickworldautomation5463 LINK NOT WORKING; VIDEO REMOVED. CAN YOU PLEASE RELOAD THE LINK

Thanks very useful

@realpars

4 жыл бұрын

You are very welcome!

Interesting video tank you .

@realpars

2 жыл бұрын

Glad you enjoyed it!

Thankyou verymuch

@realpars

4 жыл бұрын

You are welcome!

Good video I'm ready for the next one...!!! I'm waiting.

@SaeedAcronia

4 жыл бұрын

Which country?! Uk?!

@realpars

4 жыл бұрын

Great to hear that, Rajan! Thanks for your support.

@rajanbhatt5633

4 жыл бұрын

@@SaeedAcronia India, sir.

@rajanbhatt5633

4 жыл бұрын

@@realpars thank you, sir. For good info. Please continue this. Always supporting you. Thanks 🙂🙏.

Types of thermistor and differece between ptc thermistor and rtd were also asked.

Excuse me, I've got a little problem with the HMI communication to plc s7 1500. They use a different port, HMI uses rs486 while the plc uses profinet. I've tried to use the Aten converter from rs 485 to ethernet but the HMI still can't communicate with the plc. Please help if you have the answer. Thanks.

liked the subject

Very nice tutorial

@realpars

Жыл бұрын

Thank you!

The answer to question number 5 should also include human-machine interface devices. Not only screens but buttons, boards, buzzers, and control lamps of all kinds.

U R The best ❤️😍😍

@realpars

4 жыл бұрын

Thank you, Ehab!

Good information very useful important automation video. Lot of thanks Real pars

@realpars

2 жыл бұрын

Always welcome!

@pavunumuthu9510

2 жыл бұрын

@@realpars how are you sir

please make more videos this helped us alot

@realpars

2 жыл бұрын

Glad to hear that! Happy learning

It's absolutely great, Sir please make videos on SCADA systems like WINCC and Wonderware also describe their integration with PLCs through kepserver with full playlist tutorials thanks

@realpars

Жыл бұрын

Thanks for your feedback and suggestions, Junaid! I will happily pass this on to our course developers.

hello.. I want to learn more of this kind of topic.

very nice

@realpars

Жыл бұрын

Glad to hear that!

Thanks a lot! This video is very helpful !!! #Automation

@realpars

4 жыл бұрын

Great to hear that! Thank you!

@quickworldautomation5463

4 жыл бұрын

kzread.info/dash/bejne/nY6jr6pmYdHTd84.htmlsub_confirmation=1

Nice video, can you do a series on instrumentation calibrations? For all process variables. I’d be interested in signing up to the app if this was available! Thanks again

@realpars

4 жыл бұрын

Hey! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!

@quickworldautomation5463

4 жыл бұрын

kzread.info/dash/bejne/nY6jr6pmYdHTd84.htmlsub_confirmation=1

Good your video and explanation are great PRO. Please detail about Automation project management role.

@nagarathinamakkm

4 жыл бұрын

programming language standard IEC 1131 as revised to 61131

I have interview soon, how this helps it looked so helpful

@realpars

2 ай бұрын

Best of luck with your interview! :) Glad to hear that we could help with our courses.

Thankyou Realpars could you explain DCS related information and some of the interview questions for instrumentation engineering.

@realpars

4 жыл бұрын

Hey! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!

Perfact video

@realpars

3 жыл бұрын

Thank you, Abbas!

Wᴏᴡ ɴɪᴄᴇ ❤️👍

@realpars

2 жыл бұрын

Thank you!

BTW some interviewers can give you a Ramsey test or similar the day of the interview. Be sure to have enough time for the interview or ask before getting there if you feel in confidence to do so.

Top stuffs!😍🔥❣️

@realpars

4 жыл бұрын

Thank you - great to hear that!

I need to learn PLC programming

Please clear modbus and other types of communication.

Hello RealPars, As fresh graduate in the field of ICS Automation and Cybersecurity, would love to know the possible paths ahead and the different certification available out there to increase our value and understanding. Kind Regards

@realpars

2 жыл бұрын

Great suggestion! I will pass this on to our course developers, Abdul! Thanks for sharing

Thank you very much....Please, will like to know more...is there any classes

@realpars

2 жыл бұрын

You're very welcome! There certainly is, we have a complete course library filled with over 500+ video courses on PLC Programming. Feel free to have a browse around learn.realpars.com/

Sir please upload more automation based interview questions and answers I'm very interested your each and every vedio thanks sir

@realpars

Жыл бұрын

Hi Mathew, Thanks for your comment and topic suggestion! I will happily go ahead and forward this to our course developers. Happy learning!

I’m beyond nervous, I’ve worked in food processing plants for 2 years and am very familiar with SCADA interfaces and sensors, etc… but never have had a maintenance position besides doing HVAC since i was 16 with my father… i somehow got a callback for interview for tomorrow, I’m so nervous, I’m a nerd with electronics and love working with my hands so it’s a mix of both my dream jobs, programming and maintenance… i really hope i nail this interview. If i don’t, I’m gonna continue to study and do research to eventually get my career.

@realpars

Ай бұрын

Best of luck with your interview, Andrew!

@andrewfurtado4875

Ай бұрын

@@realpars thank you guys!

Nice video I want u start lessons on ignition it will help

@realpars

11 ай бұрын

Great to hear that!

I would include question about industrial interfaces and protocols.

@MrNo-rk5ef

4 жыл бұрын

Привет. На примерь что?

Please RealPars, Could you please arrange video on RTU and SCADA Interview questions with answers? Best regard

@realpars

4 жыл бұрын

Hi! Thanks for your comment and your suggestion. I will pass this on to our course developers! Thanks for sharing and happy learning!