Love your KZread shorts & all your knowledge on EDC items! Keep doing what you love

Would love to see a AAA / 10440 version of this rundown!

@TorchHacker

Жыл бұрын

It’d just be the ReyLight Pineapple Mini :-P

@wilx2703

Жыл бұрын

@@TorchHacker or the i3T if you're on a budget

@dionst.michael1482

Жыл бұрын

No you wouldn’t

@jamesfair9751

Жыл бұрын

I love the olight i3t it’s not supposed to be ran on 10440 but they work marvelously in them !! Brighter than the i5r since the i5r runs a custom 14450 that’s only 2.5 volts !

@spencercpu1983

5 ай бұрын

Capacity of lithium 10440 is pretty small and I hate AAA battery powered lights even 14500 I have a neco one with 14500 3.7 li-ion only 600mAh I have seen some Vapcell 14500 cells over 1000 so maybe light use OK included cell very light to light use best overall cell is 18650 protected Panasonic or Molicel battery yes flashlight using that are larger but there are some well designed and fairly compact considering size of battery used. I like for budget quality lights in the 50 to 100 range Nitecore flashlights are good other than the Srt-7GT with dial ring that surround the body just below the head mine died after a couple years on high faint flickering from led but I used it decent not super heavy use but I probably used dial too much causing premature failure.

Very well done...thank you for taking the time and effort to produce quality videos with great and useful information.

Personally, the flood output on the lumintop edc aa is a feature I love. I use a small light like this mostly for finding things in and around buildings and cars. The even light makes that easier than a dazzling hot spot. I carry a separate light for throw when I’m outdoors. Great video and list.

Great review! Thanks for showing all the details!

Thanks for doing all the work you have done in compiling this top ten list. My top three that I find myself carrying the most are the Lumintop tool AA 2.0 with the Nichia led, the Eagtac D25A and, one that didn’t make your list, probably because of price, is the Eagtac D3 Titanium with an SST20 led. I do also like the Sofrin sp10, but I definitely prefer a tail switch more than a side switch flashlight. Thanks again for all you do for the edc community.

@Datsyukiandeke

Жыл бұрын

I also have the lumintop and the sofirn. I carry the lumintop everyday, I like the sofirn but like you prefer a tail switch. The side buttons always get unintentionally bumped in my pocket.

@stevemendez3535

Жыл бұрын

I would appreciate if you’re going to give the prices of one light would you be able to give the prices of every light every time because I am trying to determine whether or not it is worth it, but some you describe all the way with the pricing and some are you describe without the pricing‘s.

Nice timing, I needed this video! 🤓👍

Great video man! Thanks for putting this out there! Just a suggestion for your future videos on any lights you might come across :) I would absolutely love it if you could film each flashlight consistently lol. I’d love to see what each beam looks like before I even consider it. I saw you light up the Pokelit but never saw anything else light up lol. It’s cool that you show off the light close up, but without any of the functions being shown, it’s more about aesthetics at that point. Also, you missed on the Lumintop Tool AA where the tail switch actually glows when not being used. I think that’s a huge dealbreaker for some people, especially knowing that it’s putting a drain on your battery when not in use lol. It also comes with a diffuser and it tail stands. I’d love to hear those features being mentioned in your review :) I think it can add to the “value” rating for your selections. Lastly, you commented on how the Pokelit doesn’t perform that well on standard AA batteries, but I never heard that being mentioned on any other light which I think is unfair to Acebeam. You talked about CRI at the beginning of your video but I think that’s also something worth mentioning when talking about lights. Every review will be subjective to some degree, but adding these talking points to your reviews helps to make it as fact filled as possible :) Don’t mean to nitpick here, just wanted to throw that out there. Love your channel and what you do!

Awesome selection thank you !

Well done, sir. Your efforts are greatly appreciated.

Thanks for the reviews. Ordered the SP10 Pro w/tailcap and diffuser using your link. There is also an additional 25% coupon on the page right now, net price $17.01!

Thanks for your time and effort that went into this

Great video love the channel. So much information. I would like to see when you do flashlights thst you focus more time on flood vs throw for each light. Besides that awesome video.

best EDC channel on youtube bar none!!

Great list, Dom!

Thank you for your detailed list. I have liked made a comment & subscribed.

Looking forward to this.

Thank you so much for your channel one of my favorites keep going

Super nice idea and super nice test and review .. thank you from italy

I have had an i5R on my 12 gauge semi auto for a couple years now, it is holding up great even with hundreds of magnum loads.

@luismacotela-garcia6665

Ай бұрын

How did you mount it?

I have 2 off of this list. The Olight I5R and the Acebeam Pokelit AA. I bought the Acebeam off of the review you did on it and I'm happy I listened to you. I tend to carry it a little more than my other pocket lights. I funny thing about the I5R is I didn't even notice the battery is a 2.4v. I just pull it out and charge it as needed without even looking. I feel kind of oblivious now... lol. Sofrin is really offering a great product at an amazing price, I bought the IF22A and that thing throws some light for such a small package for around $40 (also on your recommendation). Thanks for doing what you do.

@nitrorc4life1

Жыл бұрын

I like i5r and pokelit equally, both are in my daily rotation.

Amazing job!! This was great and I appreciate your hard work and effort to educate your viewers. Your knowledge is amazing and I love your channel. This is Alan,GREETINGS from Riverside in Southern California.

@maxlvledc

Жыл бұрын

Thank you very much!

SP-10 Pro is our best choice too.! We change the seal for a silicon (high pressure hydraulics) o-ring & now it is waterproof while swimming. snorkeling & diving. Cheers matey.! Great info on flashlights.

@maxlvledc

Жыл бұрын

Ooo, cool mod!!

@pllat0scave

Жыл бұрын

no tail switch,,, means no rapid reaction... ever tried to light FAST an e-switch torch, while the dog "pulling",, kids comlaining,, and wife demanding to know what the noise was....... ??? do companies actually test their prodcts in a realistic way? you give security grds a few lights,,, and get the feedbck... heres the holy trinity,, on switches... 1) allways a tail clicker... 2) a protruding one (sometimes you only have a thumb avaialble, during a strong grip) 3) a reverse clicky,, is preferable from most security personel...

@geckomabster1625

5 ай бұрын

where to get those silicone o-ring you used, thanks!

Just what I need for gift ideas. Top 10s help. 👍.

My man’s is packed out!

I love channels like this where I can nerd out on dumb man things. My grandpa would of loved this reminds me of all the millions pens, knives, and tools I used to go through when running around his shop.

Great video!

Great review

the eagtac has been my go to for a couple years now, what I love about it is the light gets dimmer as the battery dies down instead of just suddenly not working like other lights. another good light is acebeam m10

Thank you! My favorite AA/14500 is Soshine TC3 - 300lm (on 3.7V) and it is zoomie (what I appreciate the most). The price is five bucks.

Pokelit is super impressive for a cheap light with good output. So good I gave it to my Dad because it's simple and super functional. I had an EDC05C and I liked everything about it except the UI. The E05C UI looks similar. I agree USB-C would have been ideal.

Thanks for making the video

thank you x10 for your Top 10. 🙂

Damn it. I didn't need another flashlight, but now that I know of the existence of that Acebeam Rider I must have it. Thanks a lot... (Good video)

Just for info, i have a mag light which uses D cell batteries. I did change the old bulb with a single LED bulb. I changed the bulb and put fresh batteries in it in 1996. I have used the light nearly every night, and had to change the batteries in 2022! What a long run time for batteries!

@okinawanah3463

9 ай бұрын

I highly doubt that, just not possible

@765outdoors

4 ай бұрын

I have a 6 D cell LED and it was great when you had a solid set of batteries but I still changed them out every month. I inspected semi trucks and trailers at night so it got ALOT of use

@Robde84

Ай бұрын

Have a Cat 4D cell maglite, I changed the bulb to led in about 2008 and put energisers in it then. They haven't leaked and its still going. Use it a bit but not much really.

I appreciate your deep dive on this, the devil is on the details for sure. 👍

i am so happy that the top one is the sofirn. i have that sp10 pro the red color...this review of yours is the legit.. good luck and have anice day..

great video. thanks

So after almost 3 years of EDCing a Lumintop Tool AA, I finally lost it ☹ That has been pretty much a perfect light for me, and I was just about to order a new one when I thought, let me check out what my man Dominic has to say. Cool that you had it at #4 but now I think the Sofirn SP10 PRO will be its replacement. Thanks much for the vid 👍

Good vid. Thank a lot.

I have the sofirn, completely agree about the tail switch could do with simple ui version too.

nice job!

Well dang it now I definitely have to pick up an SP10 PRO and put it up against my Fenix RC05SE and see how bad the Sofirn beats the Fenix. Might actually have to pick up a Lumintop EO5C as well as I really like the dual lighting option on that light. Thanks for another great vid Maxlvledc👍

Thank you 💟

My wife loves her EagleTac AA in TI, tail stands, tail switch, and very low/low power. Hers works perfect for like 15 years...

I’ve been on a 14500 kick lately for sure. Ts10, d3a, Fwaa,fw1aa, Tool,Sp10, Ryder, Pokelit, Wuben eo5. Great vid man 🤙

@maxlvledc

Жыл бұрын

Reylight just released the aluminum pineapple btw!

The EagTac D25A is about my favorite light. Small, very bright for its size with a 14500 and instant access to low or turbo. If I could only have one light, this would be it.

@balsalmalberto8086

29 күн бұрын

Too bad hardly anybody sells it and those that do sell it for for over $50

@LDR1100RS

28 күн бұрын

@@balsalmalberto8086 I know. Very expensive when compared to the competition.

I've been carrying the Thrunite Archer 1A for years now. It can take a 14500 or AA. It takes a beating, lasts a long time, and always works. Only downside is thrunite discontinued it to move more towards rechargeable. But you can still find them on the secondary market under $50.

@seringgit20sen9

Жыл бұрын

Can this version operated with 3.7v b

@adrenalinegroove

Жыл бұрын

@@seringgit20sen9 I have a 14500 in it now, but it's a 1.5v version. As far as I know, it will work with the 3.7 as well and have a higher output.

@dusaintel

Жыл бұрын

Where can i find one?

In this size my favourite light is the Lumintop Tool AA on 14500 li-ion.

I learn so much

I've loved my Lumintop Tool AA 2.0 because it's simple, durable, and the beam pattern is more floody than almost any other AA flashlight, which is great for inspection work. I don't need my AA flashlight to be a thrower. Now that they have a Nichia high CRI version, and a 3.0, 900 lumen version, it's definitely my favorite.

Really helpful. I would like to see a similar comparison off the best 18650 flashligths with usb c charging port. Thanks!

@maxlvledc

Жыл бұрын

Sooon....

I like the rider rx, though I should have bought the titanium one you have. The steel version dents a bit easier, and my clip wasn’t tempered well so it has bent out of shape snagging on something while it was in my pocket. Still really like the look and features as well as output.

I have the Olight because I went over brand with my torches after going through so many of them. I will use this list to purchase Xmas presents for friends, first being a Lumintop E05C for the mate that has a head light but keeps asking to borrow a pencil light.

Very good review 🙂 I have a similar Lumitop AA, not the version "2.0", apparently the predecessor, but it has always had a bad connection somewhere. So when i fails I have to tighten the tailcap even more firm and then it's OK again for some time. This keeps me from buying Lumitop again ! I have a AAA lumitop as weel and its OK every time. Kind regards 🙂

Have you looked at the Wurkkos TS10? I'm interested in your thoughts on that one. Personally looking at getting the brass variant while it's on the Black Friday sale. This is a great line up of lights, and a great compilation video, I appreciate your efforts making it.

@maxlvledc

Жыл бұрын

I did a review of it actually. It's very good.

@rag_man673

Жыл бұрын

@@maxlvledc Ok. I just watched it, and realized it's not in this list because it can't take a normal AA battery. Shame but it looks like it's still a fit for me, so that's fine. (I have a brass F3WA but wanted the same thing in a slightly smaller package.) Great video too. Cheers mate, I really appreciate your responses. Keep up the great work, loving the channel.

@NiqHowie

Жыл бұрын

They’re AMAZING lights. I have 4!

I love the Coast PX 22

Real good video brother! Just out of curiosity did you do any testing of the two Acebeam lights using the Vape cell like you did with the i-5r?

@maxlvledc

Жыл бұрын

Both work perfectly BUT, the vapecell is NOT protected. And it needs protected cells.

great another video to feed my flashlight addiction....

As far as the Convoy T3 goes, you can swap the clip out for the screw-on one intended for the S2+ as well as several other models. I can confirm it fits, as I have one on my T3. It's more sturdy, and is slightly deeper carry. Unfortunately, just like the stock clip, it isn't two way

@shamusmcinky4882

Жыл бұрын

Which emitter would you recommend with the T3?

@crongl

Жыл бұрын

@@shamusmcinky4882 I'm personally quite fond of a 519a 2700k dedomed in these. With the dedome, they come out to about 2200k

@mikafoxx2717

Жыл бұрын

​@@cronglBest warm flashlight LED for not keeping yourself up at night. I would say the 4500k, or better yet dedome 5700k (which makes 4300k) is the best 519a for most people. I prefer a 3500k for general use, though. 4500k 519a dedomed is my favorite. A peachy white.

@mikafoxx2717

Жыл бұрын

​@@shamusmcinky4882 519a 4500k for you probably.

The Lumintop clip is definitely the one big thing I hate about it. That and the switch is a little too soft so you can end up accidentally bumping it and cycling modes when you don't want. But I don't think anything beats it for portability and output for the price.

Huge 1L-1AA fan! FYI the aaa doesn’t need to be wrapped in anything. A little jostling and it works fine. I do wish it would house a 16340 and 14500. I’ve run those for a hot minute ( pun intended lol) but they’re not advised. With the aa the lumens is a nice 150 for a good few hours. That’s a very nice output imo and noticeably higher that the low mode of 40lm. Just a tough cool light. Tool aa 2.0 is a fave too. So light weight and bright. Clip is a tad flush but runs fine on a hat brim. Then you can opt for a twisty magnetic tail too.

@maxlvledc

Жыл бұрын

I just wish it has a true low mode...like 5 LM, the 40 is still 900cd!

@onedirection3510

Жыл бұрын

@@maxlvledc The 40lm is actually 720cd. I get what you’re saying, but this is that sweet spot between an EDC and a more professional utility light. Too bad it doesn’t tail stand too.

Subscribed! 🔔

Outstanding video, and an interesting analyses of these flashlights. I don't think I've tested 25 different single AA models, but I've gone through a lot more than I carry, and included a few with other cell types in my testing. I agree about the Protac IL-1AA not making the cut. Its output with 1.2V cells did not impress me at all. I did not test the Lumintop EDC01 as I could see it was missing features I wanted. The Lumintop Tool AA is one of my EDC lights. It comes with a silicone diffuser, AND it tail-stands, giving it high marks for versatility since it is also an area light. I am awaiting the AAA version of this light, but I'm getting mixed messages about it working with a 3.7V 10440 cell; I helieve it does not. Although I carried it for months, the Olight i5R's proprietary battery ultimately cost it it's spot. It was replaced by the Pokelit AA on the merits of that one's universal fuel and similar brightness. #1 for me too (you probably suspected this from some of my past comments) is the Sofirn SP10 Pro, also including a silicone diffuser AND a magnetic tail-cap. Another one that did not make the EDC cut, but is in multiple tool bags and in the car, is the Nicron N7. It's a little big for EDC, but the magnetic tail-cap and aimable head make this an excellent choice for minor repair jobs in dark places. Unfortunately, the Lumintop E05C is sold out; I suspect I'd really like that one.

@maxlvledc

Жыл бұрын

It's sooo sad..because it's soooo good. The e05c will get a review as soon as its in stock.

@paulb2769

Жыл бұрын

Love my Nicron N7 !

Sofirn did make a 14500 rear tail switch, sp14 I have 2 I think

Which Flashlight would you recommend that has a good spread? I drive a box truck with no cargo lights. Looking into the sofirn sc32, but not sure how the spread is. I have the tool aa. I like having a tailight switch but not a fan of no moonlight and it doesnt remember the setting. Thought about the edc aa as well bc of the honeycomb lens. Thanks in Advance, Dominic.

My user lights are all cr123a. For me it makes sense, cause the batts will not leak. I have some over 12 years old, and they are fine, estimate they still have 80% power. My wife uses AA so I have two good ones, Eagle and one I cannot remember the name. Anyway, they are good lights, get batts almost anywhere if needed, and easy to replace in the dark. I make her carry an extra AA batt in her purse, (as if one could find it in there)! I think every size has a place in todays world...I do carry a AAA light from Prometheus!

Do you use the vapcell 3000mah 10a batteries in the sp10 pro? (You talked about them when discussing the i5r light) I'm totally addicted to these budget lights. I really wanna get into rechargeable batteries and I wanna basically take your word for it. Thanks for everything!! * Edit* what's a decent charger? You mentioned one or some in another video but that's a lot of digging and waiting haha

Olight Baton 3 Pro, 1500 lm gives "120 days" in Moonlight mode! 🤗

Fenix LD12 is good as well. It's over 50$ range but good.

Acebeam ryder rx is a dope flashlight. I feel like gear should have personality and style as well as function. Sad thing is I lost it, the clip doesn't bite enough, and it slipped out of my pocket

Great job, my 2 favourites are Olight i5r, missed the criteria but matches mine, just a little over priced & Lumintop Tool AA 2.0 because in Aus can get it cheap.

@happyknife8785

Жыл бұрын

Funny after I say that, I'm having trouble charging the Olight 14500 battery, stays on red when plugged into outlet and never goes green and when I plug it into a battery bank it turns off after 30seconds as though the battery banks can't register its there.... same thing happens with battery banks and Olights magnetic chargers for the small Olights MCC 1A, bigger ones are ok. Happens with about 6 different battery banks, 1 worked.

Agreed with the tool AA. Lost my E2A, gave away my pokelite(stupid name) and got the tool AA. Love the light hate the clip!

Yes, I am making the aluminum Lan-apple.

@maxlvledc

Жыл бұрын

!!!!!! For real!!!! 🥳🥳🥳🥳 519A ?!?!

I carry the Lumintop AA tool 2.0. *Zero complaints.* It can use one lithium, USB-rechargeable 14500 or a single AA battery. It's very small. Has multiple light levels up to 600 or 700 lumens. It's priced right. Well, one complaint: I wish that it had a deep pocket clip that perhaps also clipped to bill of ball cap. Otherwise, it's exactly what I want for EDC.

@maxlvledc

Жыл бұрын

they just came out with a V2 btw.

@cobraman502

Жыл бұрын

@@maxlvledc do you have a link? I tried looking for it.

@BukoParcel

Жыл бұрын

@@maxlvledc u have link for that v2?im interested

@orendz7740

Жыл бұрын

I just got a hanks light d4k and it’s been in my pocket the most, but before that I www carrying the pineapple quite a bit. I love that light even if I’m use to higher outputs. I also carried the FWAA a lot too even though you can’t use a AA with it. Your LAN looks awesome. Great looking light! Definitely would love to get one eventually. Same goes with a copper Tool AA.

@FreedomFox1

Жыл бұрын

Also an illuminated tail switch with 14500. It’s great, except for the clip… although I prefer a leather slip for this size anyway.

Great list. I would love to see some 55 day testing if you are will to put a fresh battery and let it sit on the shelf. Would make a good KZread video to a battle of the moonlight modes. I know my Zebra SC53c N will go for at least 16 days on it's lowest (0.2 lumens? maybe???). But never drained it entirely because I use it too often. You could be the our guide in the dark on this issue.

i own a Pokelit AA Grey (1000lumens!) fantastic...

My acebeam flickers with various batteries, the switch seems to be faulty after two months of edc. Ill stick with streamlight moving forward.

how is the tension on the SOFIRN SP10 PRO pocket clip? is it tight enough?

I have the Sofirn. Side switch comes on in pocket sometimes. Power lasts forever. Program is difficult. Can't always use the strobe real fast when I need it, dim strobe, 3 clicks, flashes 9 times, stops, it's okay. Real light weight EDC. I like it.

@maxlvledc

Жыл бұрын

what do you use strobe for?

Klarus XT1A often overlooked. My staple edc.

@maxlvledc

Жыл бұрын

Discontinued

@derekquinones8614

Жыл бұрын

eBay you can get it brand new

Not sure if I'd get another streamlight. My protac wouldn't stay on if it got even the lightest bump or jostle. Then I have to wave it around to get it to work again. Light consistently flickering. Crap.

lumintop tool aa can use 2 way clip from lumintop edc aa and it fit perfectly..give it a try

I do have the EDC05C and SP10v3 as my two primary lights they are hard to beat for AA. However, whenever I look for the E05C online I can never find it in stock anywhere

@maxlvledc

Жыл бұрын

I know, I hesitated even putting it on the list..but it's far better than past gen.

Honestly I have used a lot of these, and none of them compares favorably to the Trustfire L2 (1000 lumen turbo, simple on off, twist head for 100 lumen low power mode) Almost all these modern lights have a terrible UI with WAY too many settings and functions for defensive/CCW/EDC use. Of the ones on your list, I think the Eagletac D25A is the best option, but sadly the tailswitch on mine died after several years of use, so mine is a paperweight now.

Bad news.....only 2 of these are still available. You may want to check out the Lumintop AA 15. It's less than 3 inches long!!! Also, on the Lumintop AA 2.0 you didn't mention its best feature!!!! The switch is lighted so you can always find it in the dark!!! I LOVE that feature.

Awesome. A reviewer who clips to their hat! I'd be lost without my small carry clipped to my ball cap for work every night. Cool

@maxlvledc

Жыл бұрын

I get up at 4am 3 days a week..hands free is essential.

If I can add one requirement. Must have "protected" on off switch. I've found a dead flashlight in my pocket so many times!

the only problem with sofirn is u can't just buy 1 or 2, you end up buying 6+ with 0 hesitation

You missed the Manker E03H II. Hard to still find a reason to get these straight flashlights, all in this video.

You can use a 14500 in the streamlight Protac but the low then is as bright as high. The 14500 must have the normal length of 50mm. Many are a bit long up to 52mm. They dont work. 16340 the same. So if you want to use only high and strobe its no problem. Also there is a RCR123 from Keeppower that has only 3V. With this you have the full 350l and the regular low.

@maxlvledc

Жыл бұрын

If you use 14500s in the protac it will burn it out quickly..be careful

@Gieszkanne

Жыл бұрын

@@maxlvledc It didnt yet and I have seen some comments from others who also do it without any problems.The only Problem is with the low. But the best way is to use one of these 3V RCR123.

Rechargeable AA have capacity over 2000 mAh. Aren't they a better option than 14500? I have a batch of new ones reaching 2500 mAh.

Great video Dom! Question for you, In your opinion what's the best compact defensive flashlight that's not overtly tactical? What I'm looking at for specific are; 18650 and/or below, 50m beam minimum with high candela and have to have a tail switch. Cheers mate.

@maxlvledc

Жыл бұрын

Even these AA lights have over 150M of throw..the Protac 1L-1AA is easily the most TACTICAL of the bunch, with a 350lm only mode. If you want larger... Warrior Mini 2 is a boss.

@AusMedic89

Жыл бұрын

@@maxlvledc thanks mate

@FreedomFox1

Жыл бұрын

The Eagtac is great for reliably going straight to high (if you don’t mind a clicky switch)… I have the titanium version, which I love. The Olight Warrior Mini 2 has a perfect design imho… for a large light it’s just light enough to clip to a shirt for hands-free use (aluminum version). But it’s one of two Olight’s that died on me after a month. They’re not garbage, but I’m not the only one who has had reliability issues.

Great video love that you put all the time into it. Have you ever checked out the Thrunite archer pro 1100 lumens. It is a 14500!battery with great run times. Might have been to new for this list.

@maxlvledc

Жыл бұрын

It's not actually. I don't believe you can remove the battery. And it can't use an AA soooo. I'm also not a big fan of the button, it was way way to easy to accidentally turn on.

@gammarayburst4763

Жыл бұрын

@@maxlvledc I know for a fact that you can remove the battery info it. Not sure if it can use a aa though. Never tried it. You are defiantly right about the button. So easy to turn on in pocket. But for the linen output for its size and the 14500 battery comes with it. It is a great option. Highly recommend you trying it out now that they have the neutral white one. Great light.

Great list esp for people who aren't obsessed with lights and don't want to learn all the ins and outs of drivers, UIs, LEDs, etc. I LOVE My SP10 Pro, esp for the price they are asking, but the button is a bit proud and I often push it in my pocket. Also, I wish the fit and finish was a little bit better (I have the SP36 Pro which is much better machining so I know they can do it). For those reasons I'd prob lean toward the M150v3 PERSONALLY, but its close!

@maxlvledc

Жыл бұрын

You can program it to lock out automatically after 1 minute AND you can then program the 2 momentary outputs while it's in lockout..game changer imo

@wadeduvall7026

Жыл бұрын

@@maxlvledc ANDURIL, FLAME OF THE WEST. Guess I'm digging into the UI tonight! I'll see if you have a vid on it...

@duncdunc76

Жыл бұрын

Ya for the price I'm thinking of replacing a beloved 5 year edc Fenix light the RC05SE. The SP10 PRO is brighter has a way better user interface and even though I'm pretty careful with my lights it's nice to know if my daily beater gets lost or damaged I'd don't have to pony up so much moolah for a replacement. Kinda do wish it had a rubber tailswitch though.

The Olight i5r is actually really awesome for 14500 batteries. It looks like your using a vapcell 10 amp battery which has an interesting effect on the flashlight. It makes it single mode and 200 lumens. I think this is why you took it off your list because it loses its dual mode. But that’s why I got the i5r and the vapcell. What happens is extremely long run time and the light never steps down in brightness and stays cool. For some reason this extreme 10 amp 14500 because this almost magical performance.

@BukoParcel

Жыл бұрын

U use vapcell button top or flat top?

@iosonoi.7132

Жыл бұрын

Button top. The Vapcell h10. It’s a 14500, 10 amp, 1000 mah battery

@BukoParcel

Жыл бұрын

@@iosonoi.7132 no wonder mine didn’t work….mine flat top h10…

@maxlvledc

Жыл бұрын

Don't do that as it will drain the battery to zero which will damage it... also I don't know what will happen to the circuit itself.

@iosonoi.7132

Жыл бұрын

@@maxlvledc wait what will damage the battery?

any chance you could do a round-up of flashlights like the Lumintop E05C? I mean with the double functionality of light OTF and on the side? that would be awesome! thanks

@maxlvledc

Жыл бұрын

There are very few, in fact I can't even find the E05C in stock atm.

@OnusBones

Жыл бұрын

The Lumintop Tool (both) come with silicone diffusers, making them area lights as well (only the AA can tail-stand). Sofirn also includes this with some variants of their SP10 Pro, and it also available separately.

@Lyosha.

Жыл бұрын

@@maxlvledc I just found out about the rovyvon e200s and it seems pretty awesome on paper, the form factor is different but that may be an advantage. The only thing is I could not find any reviews on KZread of that light, there’s a couple about the uv version but nothing on the s model 🤔

Where would you put Zebralight if there was a $100 limit?

Well you got your wish. Rey released the LanApple in aluminum! They're 40$ from Rey, and 45$ from Killzone.

Nice vid, would have been nice to hear candela for each light as well.

@maxlvledc

Жыл бұрын

The video would have been way way too long. But I did take it into account with the brightness. The protac 1L-1AA has 6400cd and 350 lm for instance. So it gets a 5*

@garyandtricia1

Жыл бұрын

@@maxlvledc understood, and I hope it didn't come across as straight criticism. Itt's just that I look at candela for an EDC more than lumens, as I think towards a blinding defensive purpose as well.

@maxlvledc

Жыл бұрын

@Mr Anderson yep! I got it! If you see 5* it means more than 4500cd