The Siglent accuracy is impressive, showing 2 decimals for Type K temperature reading. That's about 390 nanovolts per unit.

@TechCornerTV

29 күн бұрын

Hi, thanks for watching and you comment 😁

Best review

@TechCornerTV

2 ай бұрын

Hi, thank you so much for your nice comment and for watching!

Preciso de chorar um multimetro novo ao patrão e uma thermal cam para substituir o vaper com pedra de rosin que uso para detectar os curtos nas motherboards... E olha o que encontrei? 2 em 1 😂 Patrãooooooo Top review 💪🏻💪🏻

@TechCornerTV

Ай бұрын

Olá Ricardo! Se mandares vir, manda vir com a lente macro (vê o outro vídeo mais recente), vale muito a pena. Obrigado por assistires!

What is the difference between this ET13S vs ET13S Pro?

Was just a day or two away from buying a 12S when I saw this review.

@TechCornerTV

4 ай бұрын

Hi! Ahaha... no worries, wait a few days, in the beggining of next month we should (I think) have a spend and save promotion. Will help to have a better price also. The prices on aliexpress in this moment are much higher in everything. I have over 90 items on my shopping cart and all of them are with higher prices. Thanks for watching. PS - Don't forget to use after the affiliate link 😁 techcorner.tv/aliexpress

noticed on your video tooltop ET1 3S There was a subtle beep on diode mode. Please can you check again and let us know. Thanks

@TechCornerTV

2 ай бұрын

Hi, I don't know if I understood correctly, are you asking if it beeps when measuring a diode? It doesn't. Beeps on continuity. Thanks for watching.

@pault6533

Ай бұрын

It beeps very briefly on first connect, than stops until the next reconnection.

You got me, just bought one. Around 140usd :)

@TechCornerTV

3 ай бұрын

Hi! I will be releasing today a video with the macro lens, take a look 😁 thanks for watching!

Nice review. It’s a shame they don’t supply a macro lens, especially since it has a multimeter built into it and so the user may need it to look at circuit boards. Thanks Hugo.

@TechCornerTV

4 ай бұрын

Hi! Yes, with macro lens it will be a totally different product. In that way, InfiRay is much smarter. Thanks for watching.

@jurgenkruger3932

3 ай бұрын

I use this instrument day-by-day and from my work on mainboards I can say that a makro lens is not necessary to find a hotspot. The thermal sensor is very sensitive to temperature changes. So it's possible to find hotspots even if you can't feel it on your fingertips.

Macro lense is available on one from AliExpress listing

@TechCornerTV

3 ай бұрын

Hi, I noticed, I recorded today the testing with the macro lens, only missing some shots and editing. Will be online probably this Tuesday. Thank you for watching!

Thank you for the thorough review. I got the same thermal camera/DMM from banggood, under the Mustool brand and it's a quite capable little thing, especially considering the price. I have a couple of questions though. What is the max temperature, your unit can measure? Because, even though the specification says that measurement temperature range is: -20℃ ~+550℃, the max temperature I can measure with mine is 400℃... Also, on my unit, when I try to disable the sounds from the settings, it doesn't seems to work and the beeps are still present. How is it on yours? Is this a bug or am I missing something? Cheers

@TechCornerTV

3 ай бұрын

Hi, I was able to disable the sounds, not sure what you're doing wrong. I can share good news also, Tooltop heard me and created an macro lens to this device, I should receive it in a couple of days. Regarding the temperature, the measures I made seemed accurate, but never took it to 550ºC. Not even my soldering station can go so high. Thanks for watching.

@xtiagoxamaralx

3 ай бұрын

Hello, I am thinking in buying the mustool for the price of 150€, the thermal camera is good for electronic repairs, for this price range there's another option?

Buonasera, ho acquistato ET13S, come mai mentre sto usando lo strumento ogni tanto l'immagine si blocca? Inoltre si potrebbe avere su lato destro dello schermo la scala dei colori come il modello ET12S? Grazie

@TechCornerTV

Ай бұрын

Hi, the freeze that you see is the ET13S adjusting to a new range, that happens because is auto mode. For what I know, it's not possible to put that scale on the right side, like the ET12S had, I'd like that too 😁 Thanks for watching.

Boa noite! Em que localidade você profissionaliza ?

@TechCornerTV

4 ай бұрын

Olá José, eu sou dos arredores de Lisboa, Portugal. Espero que tenhas gostado do video, obrigado por assistires.

29:00 You're an electronics engineer. Don't buy a new hot air station. Repair or modify the station you have, to make it do what you want it to do. As electronic engineers, electrons (and holes), are our bitch. WE tell them what we want them to do. You should do the same with your ''rogue'' hot air station. The process would make a great video too. 😊

@khuongathebounga4141

4 ай бұрын

Agreed. There are actually 2 ways to calibrate the hot air temp for this particular rework/soldering station. If you take it apart there’s quite a few potentiometers inside that can be used to calibrate all its functions such as the hot air/soldering temp reading and things like the voltmeter read out. There’s a few videos on KZread showing which pot to turn. I’m not sure 100% sure of the second method but if you hold down both temp up and down buttons for a few seconds, it enters calibration mode. You will however need to find something that can heat up to exactly 230c if you choose to do this method. I’m not sure why it has to be exactly 230 though, but apparently it states this in the manual. Also I’m with you on this making a good video too.

@TechCornerTV

4 ай бұрын

Hi, you're so right... the problem is not the equipment to fix, is really the time... but to be honest, for what I do, even with a 50º overshoot it will not be such an issue. It will be a nice to have, maybe a manufacturer read this and send one to test 😁 Thanks for watching.

Hi. Where to Download the software ?

@TechCornerTV

25 күн бұрын

Hi Yves, should be available on the Tooltop website. Thanks for watching.

What type of lens?

@TechCornerTV

Ай бұрын

Hi, take a look in this video ( kzread.info/dash/bejne/l2Z70taFkauoh6w.html ) and check the difference 😁 thanks for watching.

37:40 thats a isolated dc-dc converter

@TechCornerTV

Ай бұрын

Hi, oh! thanks for letting me know... and for watching! 😁

What kind of air quality monitor is it?

@TechCornerTV

4 ай бұрын

Hi, this is a Tuya 13 in 1 Air Quality Monitor ( geni.us/13in1-airqualitymeter ). I use it to monitor the air quality while resin 3D printing. Thanks for watching.

@mojojomo6750

4 ай бұрын

@@TechCornerTV you should do a tear-down of this - most of these cheap air-quality meters have a single sensor, and generate random values for sensors that it doesn't have! This makes them essentially worthless/dangerous if you're concerned about your health.

на русских ресурсах пока нет , визуально более менее понятно . спасибо за обзор !

@TechCornerTV

3 ай бұрын

Hi, no worries and thank you for comment. If you're interested on this, see my last video with the macro lens, they heard my suggestion and created one, it is really better with macro lens and the price is not high. Thanks for watching.

Se quemó un LED verde del power no me deja usar el táctil de la pantalla para entrar en los menú. Se me complica reemplazar ese LED le puedo colocar una resistencia?

@TechCornerTV

Ай бұрын

Hi Rodrigo, you probably can. Can't assure that the operation will be the same. Thanks for watching.

2 days since this review video was posted and the current price of the ET13s that's listed on Aliexpress is €177!!! Hell, the ET12s is currently €157. I'll pass.

@TechCornerTV

4 ай бұрын

Hi, not that I was not believing in you, but I went to verify 😁 and you're right... crazy! The ET12S was around 70 to 90€... don't know what happened. Thanks for watching.

Link is not for ET13S it is for ET12S

@TechCornerTV

3 ай бұрын

Hi, they sometimes replace the product on AliExpress. Going to check that. Thanks for watching and letting me know.

@mik99D

3 ай бұрын

@@TechCornerTV I got one. It was £148.30 including tax and shipping. Brilliant device. Thank you so much. No measure of current though. It is a bit small for that. For the money it is amazing. Nearest FLIR thermal camera is four times the cost. Amazing purchase. But in twio years the'll be a tenner each?

sorry but flir thrmal camera is far better ......

@TechCornerTV

4 ай бұрын

Hi, I have to get one to compare side by side... well it always depend on the model... for example the ET693C has a much higher resolution for an acessible price, but I reall need to get one make a comparation video. Thanks for watching.

@MrFalkye

3 ай бұрын

Maybe but 5x to 8x the price...

@romulodecastrodasilva5863

3 ай бұрын

And far expensive!

@TechCornerTV

3 ай бұрын

@@romulodecastrodasilva5863 Yes, that too. But you can't do omelets without eggs, if you use a far more expensive thermal sensor/technology, the device will be more expensive.