Man, whenever I see these videos my wallet gets scared and tries to hide😂but seriously, I haven’t been led astray from your recommendations yet. I really appreciate it

@MORGANSMaintenance

Ай бұрын

@@joeyramirez344 appreciate it. I just find stuff I want to try and give you all the information. I’m glad some of them are things that work out for you.

@MattHmm-rq6dn

Ай бұрын

Fomo kicks in man that looks useful!

Just got the spider tool holster in the mail today and set them up. Thanks for the video.

@MORGANSMaintenance

15 күн бұрын

@@justinmoses3225 I like them.. it eventually becomes second nature hitting the release with your thumb

Great video

@MORGANSMaintenance

Ай бұрын

Appreciate it 👍

I have a similar screw extractor from Engineer, has a slightly different head to it than the vessel one. Thread checker is handy for the more common screw sizes, I tend to use a thread gauge set and verniers for my line of work.

@MORGANSMaintenance

Ай бұрын

I bought it for the handle, but who knows, maybe I will need it as a screw extractor 😂

I have a annex manual impact I've used for a while since it takes bits instead of being stuck with ph2 or 3 but it's heavy and has one purpose. I got my vessel reversing ball grip days before he did and man it works well on cabnet hinge screws and honda rotor screws. Plus you get a convenient package of a regular screwdriver (the slop isn't bad no worse than a racheting klein driver). A good way to get the stripped screw function without a heavy dedicated tool. That thread checker is far better than the one on a steel loop that I have and flop around gonna have to get one. Almost a year ago you could get the spider brand to send you out screws for m12 surge m4 20tpi? Something like that I'm glad they ate including them now. I did a while ago get the titan mini but rachet with the swivel (last best tool did a mod and cut the handle down and I followed suit) it's not do bad. I took the side screws out and put copper and bronze washers in between to stiffen it up so it didn't flop around. Cutting off that handle making it silly short actually works. I used it the other day in a old handy box to pull out a screw to disassemble it (1 gang left to right) these are from the 50s. So they have there uses for sure! If you haven't tried vessel you should get a set I bet you'll use them alot even elderly relatives have switched over dosent hurt there hands with arthritis so bad.

@MORGANSMaintenance

Ай бұрын

@@MattHmm-rq6dn all great info buddy 👍

I got a Titan swivel ratchet that’s really similar to that Ares one. Looks like the one you found is a better deal right now, but Titan could be worth checking out for anyone interested. They have the 1/4 inch drive socket style or the hex bit style as well.

@MattHmm-rq6dn

Ай бұрын

Go to your local auto parts store lot of them here have ares titan and things like that in stock alot of times cheaper.

@MORGANSMaintenance

Ай бұрын

@@MattHmm-rq6dn 👍👍

😎This am went to Lowe's and got an IRWIN 6-in tongue & groove. No overabundance of Irwin tools, but plenty of choices. I've always liked their products. (yes they did have tape measures)

@MORGANSMaintenance

Ай бұрын

I knew my Lowes had them, but I wasn’t sure if they had got rid of them. 👍

@weing

Ай бұрын

Almost every Irwin tool I have bought has punched way above their weight in price, quality and utility.

I just bought nöholster clip and it came with adapter piece for m12 tools. Fit my m12 surge perfect, no spinning.

@MORGANSMaintenance

Ай бұрын

@@nikoh4591 they were supposed to be working on something for it after the initial launch to address the problem. I hadn’t bought any recently, but good to see they worked on it. Appreciate it 👍

@MattHmm-rq6dn

Ай бұрын

No spinning here as well!

Just ordered the thread checker. That set will come in handy. Thank you as always!

@MORGANSMaintenance

Ай бұрын

Your welcome. I run into needing it for TV mounts and things more than anything. I believe it will be a nice thing to have.

the wisegrip nut is more fun to grind a slot and weld a washer so can twist... or drill a a hole and hammer a hexbit so can use ¼ socket

@MORGANSMaintenance

Ай бұрын

Good ideas 👍👍 Took me a minute to realize you meant Visegrip

That Wilteeks is very cool,I do general maintenance and that would be very handy.

@MORGANSMaintenance

Ай бұрын

@@bmck-ss3zb it’s not the most robust case or “quality feeling” thing I’ve owned… but for $18 I feel it’s definitely worth it

@bmck-ss3zb

Ай бұрын

6:23 ​@@MORGANSMaintenance Thanks for the info,it would live in the van but that's frustrating trying to figure out what size thread/screw you need

Nice; that bolt gauge set looks interesting.

@MORGANSMaintenance

Ай бұрын

@@OnusBones 👍👍

The vessel is a manual impact driver. When the cap is struck it rotates the bit.

@MORGANSMaintenance

Ай бұрын

@@mumbles1justin 👍👍.. yeah I couldn’t find anything around my house that was solid enough to try it on. I saw that in their video.

@mumbles1justin

Ай бұрын

@@MORGANSMaintenance It just sounded like in the video you were under the impression it was a shock absorbing build into the handle. Which is not the case. Its to break loose rusty seized up bolts and screws. It can be used on undamaged fasteners and will not tear up the head of the screw when used properly.

@MORGANSMaintenance

Ай бұрын

@mumbles1justin I probably misspoke. I was trying to explain that there was a little more slop in the bit to allow for the handle to spring back forth. Like I said, I had no intent in using mine that way… but thanks for clearing it up 👍

@MattHmm-rq6dn

Ай бұрын

It does like the impacta I got mine only a little before him and yep it does honda rotor screws. I noticed when I put significant pressure on the back on the screwdriver and tried to reverse some philips screws it auto assisted itself. For what it's worth it does the same function as impacta in the more convenient ball grip form. The honda was a 1992 accord aluminum rotor screws annex ph3 jis bit.

I once won a VIM tools master set from JDTCo. So there are winners. Better luck next time.

@MORGANSMaintenance

Ай бұрын

Nice… Congrats. I think it’s a cool idea, I will probably try it every time they do one.

I do the same thing every time I see Marshalltown. It’s just Marshmallow to me. 😂

@MORGANSMaintenance

Ай бұрын

@@k1_w3 😂

I have 2 styles of the thread checkers. I have the type that are cable looped and the type you have. The type you have is soooooo much better. You made the right choice. This can also actually work with thread pitch it doesn't have. I was having trouble figuring out a metric screw. I got the size to fit in one but it wouldn't thread. I looked that size up and found another thread pitch my didn't have. I ordered that screw and it was the right one so I made a mental note of that. if you find one that doesn't thread metric or SAE but you find the size it fits, it's the thread pitch that's off.

@MORGANSMaintenance

Ай бұрын

@@scotts4125 appreciate that info 👍 Yeah it makes more sense for me to have this type. Like for hanging TV’s and things I can just stick these in the TV to determine the screw needed

@MattHmm-rq6dn

Ай бұрын

Yea I have a cable loop one and it rattles like the Dickens! Going into scrap once I get one of thr ones he bought

@scotts4125

Ай бұрын

@@MattHmm-rq6dn For me it's either taking it apart to get to the correct checker or being lazy and turning the whole thing while connected. Neither are good options.

@MattHmm-rq6dn

Ай бұрын

Agreed 👍 thanks for thr like mindedness

The Ares hex one is still full price so that's probably how you got the 1/4. Probably not worth the $7 difference to not use an adapter.

@MORGANSMaintenance

Ай бұрын

@@turbot_ yeah they didn’t put the hex one on sale, I saw that one on sale and just ordered without looking

Thread gauges are worth having.

@MORGANSMaintenance

Ай бұрын

They are always something I tell myself to buy when I need them, then forget about it till I need them again

Titan has a swivel head ratchet and they have a long handle wone. The Zyclopse is nice, but it's pricey and I'm not sure it's that much better. Olsa, Tekton, Titan, Icon, and some others have good swivel head ratchets as well.

@MORGANSMaintenance

Ай бұрын

@@bretlagasse3560 I saw that one too, not the long handle though… thanks 👍

@bretlagasse3560

Ай бұрын

@@MORGANSMaintenance You're welcome. Swivel heads do make a good option to have. It's one of those, once you use it, you don't know why you didn't use it before lol

Great vid friend. What type of maintenance you do?

@MORGANSMaintenance

Ай бұрын

I currently do all interior remodeling in commercial… and then service calls for just about every field in residential and commercial. I just started 100% on my own in the last few years, prior to that I’ve worked 20 years in industrial maintenance (small amount) and as a Facilities Manager for a Campus of Offices and Residential Buildings

@ApartmentMaintenancePOV

Ай бұрын

@@MORGANSMaintenance that’s awesome man!

Do you have a link or know where I can get a protective boot for my m12 surge?

@MORGANSMaintenance

Ай бұрын

@@nathanelizondo4526 you have to find the Milwaukee Brand version on eBay or other places. It’s for the same Gen Impact Driver and they quit making those. The part number is 49-16-2553 They have some off brand ones amzn.to/4bJbrnt I’m not sure how well they fit, haven’t used them

Does Vessel have any SQ#2's?

@MORGANSMaintenance

Ай бұрын

No they don’t unfortunately. I don’t guess they use those in Japan. Thats why I bought some of these handles to put bit holders in

@MattHmm-rq6dn

Ай бұрын

The bit sets made for the US they carry sq 123 bits. As for 13mm japan it's hard to find annex and sk11 has some but not as easy to find. For square 2 get the usa market vessel bits they can be bought in bulk in tick tack packs.

The only thing I don't like about JDTCO is his hazing of people like Mr suburu. I think he takes it too far and definitely looses respect in my book. Commentary is one thing harassment of other people is another. It's why I don't buy from him unless it's too cheap not too.

@MORGANSMaintenance

Ай бұрын

I think I’ve only watched one of their videos… I haven’t seen it much.

@MattHmm-rq6dn

Ай бұрын

Yea politics and fueds arnt my thing on KZread but when it's slapping you in the face it's hard to miss. I take comedy with a grain of salt not a deicer truck worth 😆. Just something to note for thoes not aware not that I watched him much anyways. Now back to your regularly schedule tool talk!

@scottaddison8071

Ай бұрын

@@MattHmm-rq6dnyea, kinda sounds like you Like drama yourself. You just spent a lot of time Yackimg your Nonsense