I’m not a 4-stroke SeaDoo guy, but there is so much to learn from Calas. There should be many more subscribers to this channel than there is. Good work, and very informative!

Im not a mechanic but with all this tutorials Im about to work on my own motors.

The engine stand should be named Walter after myself. Ability to hold a load for a long period of time, be patient and wait and still remain reliable. Lastly, the stand waits on Calas but Calas never has to wait on the stand (just like Walter 😉). So there. Name the stand after me 🫠

tim rebuilding a 717 right now and was just googling this @6:14 HAHAHHAHAHAH

You could replace 100 friends with one guy like calas.

" Last Stanza" 🎉💪

@tiptoplandsolutions1421

Жыл бұрын

Awesome channel..I learn mucho..! Thx a...

Name the engine stand “The Operating Table” because the engines undergo emergency surgery from Doctor Ernesto!😂 every time I hear ernesto’s voice all I hear is when he was talking about his harbor freight compression tester and needing to use his friends for better accuracy! I love when he uses the deep voice! “My friend has a snap on!” (In the deep voice!) 😂 please say it again next video!

I always stress with my junior mechanics that its INCREDIBLY important to use a little as needed with gasket maker, ALWAYS ALWAYS ALWAYS make sure you use hand tools when installing sensitive bolts. Never use an impact when the instructions call for torque wrench!

That engine having the CB off with the increased vibrations would also contribute to an increase in bearing wear. He is correct the more fuel you dump into an engine the more it can mess up the oil

Great stuff man I don’t even own a jet ski but love how you explain and put out there your knowledge I want to get one because all of my motorcycle buddies are getting jet ski’s, Will love to see a video of what to look for in a use well maintained ski or is it better to buy a new one

Ernesto your Stands name should be john boy. its beat the ef up but strong as an ox lol. also the disposable roller from the dollar store is perfect for applying the sealant for the cases. cost is 1 dollar lol

Nice video Ernesto, we tank you💪🏼💪🏼

NO MAMES WEY!!🤣🤣 Great Video man! Very Informative! So many mechanics make this mistake with using too much Silicone. Then they get it in "la pinche malla" 🤣🤣

If the silicone has cured and it's brittle then you have probably use to much cataylst during the process .

Another Great video 👍🏼 I wish I knew how to tear them down and rebuild them like that 👍🏼 , Greetings from Austin Texas 🇨🇱 . Lake Travis . Sea Doo Life 🌅

Name the engine stand Buster.

Gotta luv watching Ernesto . But dude don’t time lapse the video or Ernesto will fire your butt. 😂

Gracias por tus videos eres un apasionado de tu trabajo y aprendo mucho de tus videos 💪💪💪

Clutch stand 😅

@calasworld

Жыл бұрын

🤦‍♂️😂😂😂

Question: after replacing the throttle body on a 2016 RXPX 300, would the throttle body need a calibration using can doo or buds?

Great info. Thank you for sharing your knowledge. Love the channel.

Hector the engine stand lol

Engine stand = EL Chapo!

Stan the stand

You should have a big shop and a team selling custom pwc's and repair shop. I will trust you more than a dealer!

We need a Part 2!

Engine Stand- palo trancado

In the USMC, we always called stands similar to that a "hotrod". Go get the hotrod

Another great video keep up the good work i love watching your videos from down here in Hobart, Tasmania.

Name the engine stand “little Calas”

With what u said at 5:30 someone impacted drilled TF out of my head valvue bolt and bent it, Took me 5 full days playing around to finally get it out to find it bent, also just thought it was just corroded real bad! Good Video.

Great stuff. Love these videos. Always curious with how and why these motors wear and fail. (Modded rxp215 459hrs still running strong)

Name the engine stand The Hulk!!!!

Love the video! I am learning from your content. Thanks for the awesome video!

Tio Ernesto 😂 keep up the good work

Best videos ever fearless!!!!!!!!!!!!!!

name for engine stand : " the silver fuse..."

Hello I love your videos and I learn a lot. How many hours can my 2013 seadoo gtr 215 do. It has a 560 hours now Thanks

Hello Calas, after how many hours you recommend changing oil on stock jet ski? Nice video ! thank you

@calasworld

Жыл бұрын

Hello my friend on a stock JetSki you can go with the factory recommendation Which it will tell you know maintenance required on your dash

Thanks mate. Loved this video

Transformer's Stand

"FrankenStand"

Great video !!!! Thank you Ernesto

Engine stand name: "The chopping block"

Frankinstand

@jetskiangel

11 ай бұрын

I have doo2021 it left me in the water 2 times but it doesn't turn on I changed the relay to turn it on but it came back and it was the same after I used it 4 times I took it out of the water I took out the relay I put it on and it turned on that you think it can be the problem?

Franken-stand

Bueno por lo menos no perdía aceite con tanto ultra grey 😂

Hayyyy mi madre 🤦🏼‍♂️🤣🤣🙏🏼🙏🏼🙏🏼

Hi Ernesto I’ve just bought a 2006 rxp supercharged with 190 hrs would you recommend changing the cam gear bolts and flywheel bolts it has a good service history with it

@calasworld

Жыл бұрын

If you are keeping it stock, don’t touch it if you doing any type of performance yes, I will change the flywheel bolts

@simonmusicka5552

Жыл бұрын

@@calasworld thanks I’m keeping it standard

La pinche bomba de aceite tiene metal en la malla! NO MAMES WEY! 🤣🤣🤣

@fredericosanchez5318

Жыл бұрын

Haha no mames wey🤣🤣🤣

Merci beaucoup ❤❤❤❤❤❤❤❤

There not a single video where I dont learn something new!!

Como ay muchos mecánicos que no saben bregar con motores sea Doo 😂😂😂

“Old Standy” ….

Engine stand name: Standy McStandface

I have 2022 RXP 300 MILLEMIIN YELLOW did you have stage 2 Avaliable ???

Would you recommend using liqui moly Marine oil. I have a 2016 RXPX 300 ? Thanks for all the videos you provide!

@calasworld

Жыл бұрын

I saw their booth at the World Finals last year at Lake Havasu. I’ve heard good things about their product from other shops but I can not give you an honest answer I have not tried their products.

@godfatherstilllives5327

Жыл бұрын

@@calasworld what type of oil do you use? I do know you have to be careful what type of oil to use so you don’t damage the super charger. I guess I have some research to do

what is pinning the crank

Name it Standley.

"Standly"

Thank very much for this episode. One question Did you have to do anything for the For the surfaces of the cam bearing in the head.?

@calasworld

2 ай бұрын

No there’s nothing to do. There is no bearing on the Seadoo head. if it’s messed up, you have to get a new head.

hey Calas do you rebuild honda aquatrax motors?

@calasworld

Жыл бұрын

No sorry

When reinstalling the engine , do you always use a engine alignment tool?

@calasworld

11 ай бұрын

No

Use nil none awful stuff inside engine

What bearings do you recommend if you are going turbo?