Titan vacuum bag (update)

This is how I stop the dust leaking from bag and making sure it's a good seal. Update from my original post about where I used 2 bags. One over the centre sponge.

Пікірлер: 26

  • @Vtlkvtlkvtlk
    @Vtlkvtlkvtlk8 ай бұрын

    from my experience it fells like there should be rubber seal between the lid and the bucket . The lid clips on a side are a bit loose. If you add rubber seal ( f.e. the ones for door/window drafts) the seal between the lid and bucket will be tighter and the clips will be tight as well

  • @marcusharmon8389
    @marcusharmon83892 ай бұрын

    Get some nylon spool it round the vac tube put some superglue on it to hold it and stop it unwinding etc and job done no need for masking tape

  • @muskymcg
    @muskymcg3 жыл бұрын

    I MST have got the wrong bags..will try this..cheers lad

  • @adsmail
    @adsmail3 жыл бұрын

    Are you using this and omitting the concertina filter and the sponge filter?

  • @waynehendry9782

    @waynehendry9782

    3 жыл бұрын

    I still have the sponge on but not bothered with the optional filter cartridge. I guess you could use the filter cartridge and a bag or even cover the filter cartridge with a bag and just use like that. There are a few combinations you could try. My thinking is to protect motor from dust but mostly filtering out the air for a clean environment and protect my lungs. The puff of dust I was getting from vacuum worried me with standard bag pushed on as not sealing well.

  • @DriventoExtremes
    @DriventoExtremes Жыл бұрын

    Thanks for the tip re the choice of bags. Do you have a link to them to purchase on eBay or Amazon? Many thanks. Mac

  • @waynehendry9782

    @waynehendry9782

    Жыл бұрын

    I struggled to find a good bag so ended up using a mirka or festool bag and used tape to hold in. Don't matter if it 20lt or 30lt or even bigger. Still works. Often the supplier would change bags and I'd get paper vs fleece or just poor quality. .Bags are not cheap unfortunately if you want a quality hepa bag, so I often cleaned them out and reused a few times. I see 10 x TITAN SCREWFIX Vacuum Cleaner Bags Microfibre Hoover Bag 16L 20L 30L 40L on ebay. Might be good enough for you or do you want something better.

  • @DriventoExtremes

    @DriventoExtremes

    Жыл бұрын

    @@waynehendry9782 Thanks for getting back to me Wayne. The bag that came with the vacuum split on first use which was a pain as I had planned to modify it for multiple use (split open with blade and then use bulldog clips to re seal). Ideally I’d like just the one bag that can be emptied continuously and ideally washed out periodically. Thanks for your help with this.

  • @waynehendry9782

    @waynehendry9782

    Жыл бұрын

    Buy a festool or mirka hepa bag with added zip off ebay. Yes the burst bag problem is across the vacuum range with poor quality bags. The poor filtration causes motor failure plus air pollution. I stick with genuine quality bags now

  • @DriventoExtremes

    @DriventoExtremes

    Жыл бұрын

    @@waynehendry9782 Thanks for the advice, much appreciated.

  • @jimtaylor431
    @jimtaylor4312 жыл бұрын

    Design on this thing is baffling. I have the same and every time I empty the bag, I sit looking at how you install the bag thinking I must be missing something blindingly obvious to secure the bag in place, but no.. it's just a crap design. I think I'll take your lead with the gaffer tape from now on though!

  • @cornishplumber5051
    @cornishplumber5051 Жыл бұрын

    Was just about to bin that crap hoover , thx ))

  • @stevejenks2504
    @stevejenks25043 жыл бұрын

    Do you have a link to the bags?

  • @waynehendry9782

    @waynehendry9782

    3 жыл бұрын

    Links go dead after a while which is why I never put link. Titan microfibre bags is what you need to search for. Like this.. www.ebay.co.uk/itm/392663240393

  • @stevejenks2504

    @stevejenks2504

    3 жыл бұрын

    @@waynehendry9782 Cheers fella

  • @hervanvolney5086

    @hervanvolney5086

    Жыл бұрын

    Mmm M. 7’m Mc M P

  • @oimpaa
    @oimpaa Жыл бұрын

    how come you have the wet filter on ?

  • @waynehendry9782

    @waynehendry9782

    Жыл бұрын

    It's a sponge so i leave on just incase something gets past bag and then sucked in the motor causing damage. Sponge may prevent that. On or off It makes no difference to the suction.

  • @oimpaa

    @oimpaa

    Жыл бұрын

    @@waynehendry9782 regardless isnt the white filter for dust etc im just wondering as ive missused mine so many times now

  • @waynehendry9782

    @waynehendry9782

    Жыл бұрын

    @@oimpaa It's the dust getting in motor that kills It. Bags really need to be HEPA rated. Have a look at mirka vacs for drywall dust and other brands

  • @oimpaa

    @oimpaa

    Жыл бұрын

    @@waynehendry9782 so you reccomend to use over branded bags and not to go to screw fix and buy bulk cheapos

  • @waynehendry9782

    @waynehendry9782

    Жыл бұрын

    @@oimpaa You just got to get what you can to fit. It's been a problem for a few years now so I even resorted to nilfisk bags. Screwfix didn't have any for ages.

  • @MC-5H0W
    @MC-5H0W Жыл бұрын

    Can 30L titan bag fit in 20L?

  • @waynehendry9782

    @waynehendry9782

    Жыл бұрын

    Yes. Bags can be bigger without any problem

  • @MC-5H0W

    @MC-5H0W

    Жыл бұрын

    @@waynehendry9782 thank you my friend.

  • @AlexSmith-fs6ro
    @AlexSmith-fs6ro2 жыл бұрын

    Unbelievable that you have to duct tape tge dust bag. Bad, design. You try to buy one of these for the wife.