Thanks for info on adapter, My AD snow foam gun no longer fits my new Titan. Had a poor Nilfisk before.

Struggling to fit the patio head, thanks for your video as the instruction was poor

Great video - really helpful. Thanks very much Charlie!

Great video ..thank you Charlie 🇮🇪

@charlieschannel4192

12 күн бұрын

Glad you enjoyed it

I bought this today, your review was a great help, thanks

@charlieschannel4192

Ай бұрын

👌👌

Every time I see the view of the houses from your driveway, I think I'm back in the Hornchurch/Gidea Park area where I grew up (now in Wales).

@charlieschannel4192

23 күн бұрын

The look of essex 😂

@marsy1480

23 күн бұрын

@@charlieschannel4192 I'm taking it that you aren't a million miles away then 🤣. On another note, I am after a really easy to use pressure washer. Im a girly with pathetically weak joints so need something with easy to pull trigger and fitment of accessories. I've only got a tiny garden but the concrete gets filthy! Any ideas would be most welcome! Tia

@charlieschannel4192

23 күн бұрын

This is a good product but it's bulky, The bosch aquatak 110 is small, affordable, light and does a pretty good job, so probably that 👌

@marsy1480

23 күн бұрын

@@charlieschannel4192 brilliant, thank you. I will go for the Bosch. I was thinking that it looked really lightweight (I'm as weak as a kitten 🤣).

Thanks for the tips for putting it together. Manual wasn’t much use. Cheers!

I have this and it’s a fabulous piece of kit for the money. Can you get a longer hose to fit this model the 6m hose is a tad to small

@roylang9754

Ай бұрын

Yeah Screwfix do a titan 10m hose for £20 👌🏻

Great review vids man 👌🏻, do you reckon the next model up, the TTB2200PRW is much better?

@charlieschannel4192

2 ай бұрын

Im notn sure ive never used it , works out around £40 more for 10 bar more pressure, so it's a little more pricey, but depends if you want abbit more oomph 👌

@SonofChurchill

9 күн бұрын

@@charlieschannel4192 I looked at next one up it's got a wheel to roll up holes and as above just 10 bar more would you real see that. As this is a month ago what did you get ?

Thanks, very helpful video - it convinced me to buy one! My only issue with the assembly is that when I'm supposed to put the final four screws in the base plate, only two actually go in... The last two screws don't have anything to grip on to when I attempt to tighten them, and they just fall out - exactly four minutes in to your demonstration. Have I done something wrong? (The unit does work).

@charlieschannel4192

13 күн бұрын

They should go in there, are the screws different sizes or lengths? and is the base plate deffenatly in the correct place??

@loughboroughjim

13 күн бұрын

@@charlieschannel4192 Hi Charlie, I put four identically-sized screws from the original packet into the base plate attachment, which looks to be in exactly the same place as yours in the video. Screws 1 and 2 were very fiddly to fit in, and they firmly secure the whole attachment to the base plate. When I then insert screws 3 and 4 into the screw holes on the attachment and turn the screwdriver, there doesn't appear to be anything corresponding on the base plate itself for the screws to fit into or to grip onto, so they just fall out again. As I said earlier, everything else in the setup went exactly as per your video, and the pressure washer works fine - it just seems strange that these screws don't have receptacle holes on the base plate to screw into - and the base plate feels slightly less secure than it should be...

@charlieschannel4192

13 күн бұрын

@@loughboroughjim yeah very strange, tbf as long as the base is secure and working then it'll have to do, maybe try a longer or wider screw??

Does anyone have a link for the Snow Foam attachment he used? :)

@charlieschannel4192

26 күн бұрын

mjjc.com/collections/foam-cannon-s-v3

Hi mate. Thanks for the video. I ordered the adapter that you linked in the description, I’ll probably order the MJJC foam cannon as well. Is there any specific adapter I should order with the cannon? Or can I just order it without an adapter? Does the adapter I’ve ordered in the link fit onto the cannon? Also could you tell me where you got the shorter quick tip connect that replaces the lance? Thanks

@charlieschannel4192

2 ай бұрын

You can order any connection type when you order your lance, so if you have a karcher washer you can have a karcher connector, if you have a bosch washer then you'd get a bosch adapter, and so on. But the downside of that is if you want to change your washer you'll need a new adapter head for your lance, so ordering the quick connect allows you to use it with other washers, but you'll still need an adapter quick connect to what ever washer you have, the short tips are avaliable in lots of places, mine is from the mjjc trigger gun set, but amazon and halfords and some good options, might have to be some trial and error hope that helps, (just check what quick connect you want/need as there is 1/4 connections and 1/2 connections)

@WuIIie

2 ай бұрын

@@charlieschannel4192 I have the exact same pressure washer as the one featured in your video. So I’d be better ordering one with the Bosch connection? And between that and the adapter that’s linked in the video I should be good to go? Thanks

@charlieschannel4192

2 ай бұрын

Yeah then you should be fine 👌👌

On the Amazon adapter there’s two types with aqt and without which one is it for this titan

@charlieschannel4192

Ай бұрын

Pressure Washer Adapter for Bosch AQT, 1/4'' Quick Connect Fitting Car Wash Water Gun Head Adapter Washer Spray Wand Couple Snow Foam Lance Adapter Foam Cannon Gun Connection Fittings amzn.eu/d/eibfurw

Great video chap. Would like to see how the big boy 155 bar does. Seriously reckon this is better then your karcher. Keep up the great work.

Is there a way to connect those swivel pressure guns to the pressure hose directly instead of having to use the titan gun and another attachment?

@charlieschannel4192

Ай бұрын

Swivel pressure guns??

@jawadamjad7864

Ай бұрын

@charlieschannel4192 yes like the MTM SGS35 - could please show how that would fit and what attachments would be required? Thanks

Great video.. was going to get the titan 150 but will stick with this 50 quid cheaper ...Thanks

Thanks for the comparison. Shame on the wobble think after a while a new gun upgrade would be key. How was the trigger? I know some make your hand hurt after time using.

@charlieschannel4192

2 ай бұрын

The trigger is actually pretty light, I think it's a great bit of kit tbh 😂

How did you get the electric cable fastened using that fitting that came with the washer please.

@charlieschannel4192

2 ай бұрын

What part do you mean??

@edmitchinson1014

2 ай бұрын

Hi Charlie. I got a piece of black plastic about 6 inches x 1 inch. It has a rounded edge that fits into the body of the washer. It's used to tidy up the electric cable when not in use. I can't work out how it fastens. Thanks.

@charlieschannel4192

2 ай бұрын

You have to attach it before you screw in the top cover, so it goes inside of it, if that makes sence 😂

Autoglym foam lance need to use adapter?

@charlieschannel4192

2 ай бұрын

When you buy the autoglym lance, you would need to choose the correct adapter, but you can use the quick connect for this as well, as long as the autoglym lance has a quick connector aswel

Can you link up the quick tip connector and the foam cannon as well please ? Great set up.

@charlieschannel4192

Ай бұрын

amzn.to/3yZvMHu that's the titan adapter That's the lance mjjc.com/collections/foam-cannon-s-v3 Trigger gun mjjc.com/collections/high-pressure-washer-guns-and-nozzles/products/5-in-1-spray-nozzle-and-trigger-gun-kit-suitable-for-all-karcher-k-series-pressure-washers

@charlieschannel4192

Ай бұрын

The short trigger is for a karcher gun, so i need to get a adapter for it 😂

@swimgood3873

Ай бұрын

Im with ya 👍​@@charlieschannel4192

Is there a decent foam cannon that just fits without getting other connections?

@charlieschannel4192

24 күн бұрын

You can get any cannon that you want, just when you choose it, make sure it comes with a titan / bosch aqauatk connector, most lances allow you to pick what adapter you want to be on it, like this one mjjc.com/collections/foam-cannon-s-v3/products/mjjc-foam-cannon-s-v3-0-for-bosch-aqt-aquatak-and-blackdecker-pressure-washers If your not sure what lance is right and you want to try a few, then I would recommend a 1/4 quick connect, which all lances come with. This way you can swap around whenever you like 👍

@richharris3016

17 күн бұрын

@@charlieschannel4192 Why do my replies keep getting removed?

How would you compare it to the Bosch Aquatak 120 (have it avaible for under 100£ atm), is it best budget option for that money?😂

@charlieschannel4192

Ай бұрын

I havnt tried that washer, but the titan for £100 is pretty epic 😂

great vid Charlie, much easier to follow than the hieroglyphics in the instruction manual! Nice one, atb

@charlieschannel4192

Ай бұрын

👌👊

Screwfix Just brought out a titan car foamer to fit on all there washers.... Could you try it out? It's £25

@charlieschannel4192

Ай бұрын

You've just given me a video idea 👌😂

@roylang9754

Ай бұрын

​@@charlieschannel4192bought a titan foamer and not too bad for a pony. Used Halfords advance snow foam with it and took around 4 mins to drip off my taxi 👍🏻 Looking forward to your review and tips 👌🏻

Got this today for £79.99 👍

@charlieschannel4192

Ай бұрын

Bargain! 👌

@alanwilkinson9487

21 күн бұрын

Absolutel bargain.. 140 now..

Thanks mate, this is really good. The instructions for it are terrible

@charlieschannel4192

23 күн бұрын

👌👌👌

this model is on offer at the moment £20 off, bargain

@swimgood3873

Ай бұрын

Is it?

@tonymcfeisty2478

Ай бұрын

@@swimgood3873 It was at the time I posted, 2 weeks ago

Same as you paid 69

Dzięki Charlie za naprawde dobry film poglądowy, właśnie kupiłem myjkę Titan i zaraz będę sprawdzał jak działa.👍✌️🙂.

@charlieschannel4192

Ай бұрын

Good luck mate 😂

@szybared

Ай бұрын

@@charlieschannel4192 what you mean mate (?) 🤔

@charlieschannel4192

Ай бұрын

As in hopefully it all works and you enjoyed it 👌

@szybared

Ай бұрын

@@charlieschannel4192 👍✌️🙂