🔥 We have head studs for many different make, model and year trucks! Order yours today! www.thoroughbreddiesel.com/brands/arp/

Thanks for this video.

@thoroughbreddiesel

Ай бұрын

You're welcome.

Wade, great video... I watch all your stuff. Question, I believe, or at least it appears that my rocker box gasket is leaking where it mates to the cylinder head a bit on both sides of the block closest to the firewall. Can I remove and then replace the rocker box without having to remove the 5, 10 metric 8's bolts on the top side of the rocker box that thread into the cylinder head?

@thoroughbreddiesel

5 ай бұрын

I am pretty positive that those bolts will have to be removed to get the rocker box off unfortunately.

Great video. Did you use a specific brand gasket on your rocker box/head or any grey rtv. I am doing this job bc of a leak and I don't want to do it twice. Lol.

@thoroughbreddiesel

Жыл бұрын

We used the Mahle gasket here that was included with the top end kit.

Do you have a video of removing the cab??

@thoroughbreddiesel

Жыл бұрын

No, but maybe soon.

So is there a way to remove a rocker arm that’s bad/broken without removing a headbolt???

@thoroughbreddiesel

21 күн бұрын

No

In your driveway.... where you happen to have a crane to remove the cab.... I'm buying one of these tomorrow, time to get some pricing on this job.

@thoroughbreddiesel

3 ай бұрын

😂

Can these cylinder heads be performed in the cab as well can the heads be mounted first before the studs or do the studs needs to be installed before the head. Because I don’t really sis a big difference in it really.

@thoroughbreddiesel

Жыл бұрын

If you leave the cab on, the heads will go on first and then the studs will be installed.

Curious why you would prefer an impact socket over a chrome one

@thoroughbreddiesel

Жыл бұрын

It is a high torque value that you go to, and a impact socket is designed to handle higher torques that are applied via impact guns, etc.

Was in the 6.0 game.. but I gotta say....feels a lot better being in the 6.7 game..😆

I’m hoping to find someone who can tell me how to remove a broken standpipe from a 6.0 power stroke F250.

@thoroughbreddiesel

9 ай бұрын

I hope someone can here too. Depending on how deep it is you may need to go ahead and pull the head.

how hard is this to do with the cab/body in place

@thoroughbreddiesel

Жыл бұрын

Its not bad at all, can be done either way. The key is getting all of the cab bolts out.

Is it pretty easy to just install your head studs if the stock HG are still ok? With the cab on?

@thoroughbreddiesel

5 ай бұрын

Yes, but give us a call if you have a question.

@hinds90

20 күн бұрын

​@@thoroughbreddiesel assuming 1 stud at a time in the correct order of course?

Do you ever get "spring-back" when torquing the nuts? Mine are lubed and still want to spring back about a 1/16".

@thoroughbreddiesel

Жыл бұрын

Lube on the threads is probably causing this.

GONNA HAVE A HARD TIME WITH THOSE FUEL LINES. THEY ARE VERY HARD TO RUN IN THE RIGHT SPOT AFTER THE HEAD IS INSTALLED

To bullet proof a 6.0 whats something like that cost ?

@thoroughbreddiesel

7 ай бұрын

Give us a call 1-859-737-4966.

Ive done nothing but torque to yeild, a 210 foot pound final seems too loose? I am about to do my own truck and really tempted to go back with OEM. A friend of mine whos done head studs says every time hes gone back into a head gasket it was studed? So lets start a discussion. Studs or torque to yeild? Im only running 300 to 400 hp. And i just don’t believe 210 final will hold

@michaelplemons3688

10 ай бұрын

Gator studs. Comp series 265ft lbs on head studs and will never had another issue