Thanks for sharing your tips, appreciated ♥️

why cant it come with the ruler already attached?

I love my magnetic hoop also. Even if I have to use a bigger hoop than necessary, I use the magnetic hoop because I like it so much better than a regular hoop; Great product.

I just ordered a monster hoop today!

Why doesn’t it come with permanent rulers stamped into the outer hoop?!

@princessandzipper4737

Жыл бұрын

Because not all machines have a true center in the exact middle of the hoop.

Thanks, DIME as Always!

Why didn't DIME manufacturer the hoop with the ruler printed on? Seems ridiculous that I have to put on stickers. That's leaving room for user error. I think a grid should have been included as well like with the old school hoops.

@netty3767

Жыл бұрын

Totally agree with you ridiculous

@paulettepetro6464

5 ай бұрын

I agree.

Hello, and thank you for the information. I really like the magnetic. Do you know if your magnetic hoop can be used with the Bernette B79?

Fantastic

I love my hoops, I found that if I put some double sided tape on the metal and it hold the stabilizer firm and can be reused a number of times

Please, could you show on a video how you hoop designs that fill the hoop, say on 8x 12 SHM with a design 7.75 x 11.70 and how you put the design together on the sticky paper when it prints on 2 sheets. Thank you !

Can you show the full process from start to finish with the magnetic hoop

Im trying to find the cross hair for the magnetic hoop 5x7 cant seem to find it

First, I LOVE my Dime magnetic hoops. I love them for doing towels and quilting. I'm currently doing a project and want to quilt on the magnetic hoop (I have the 9.5 , 14 and a 5. x 7). The blocks are 9.5 x 9.5 square. I'm doing a raggedy quilt so want to quilt each block around the designs. Is there a way to use the 9.5 x 14 magnetic hoop? If so, how??? Thanks in advance.

have you found that the smaller hoops can cause issues with bobbin? like pulling it up as it passes over? if so, what can be done?

How does the laser attach to the machine?

Need to get a hoop guard

What is the best video to show step by step how to do end to end quilting?

The Monster hoop keeps triggering my machine to recalibrate. Every time I reshoot something. It takes 3-5 recalibration son my machine before it will stitch the design. I remove the top, reposition, try to start the stitch out, and get the recalibrate notification. 4-5 times. Sometimes, I can’t seem to get it to line up to load it. I’m wondering if there is a small burr in the fitting? Any suggestions would be appreciated.

Does the weightless quilter adjust taller to work with 10 needle that is on the stand.

do the magnets affect the electronics of the machine

Hi! Would these work for leather or vinyl? I can only afford one, so does anyone have a suggestion for which size to buy? Thanks in advance!

I Eileen What other way can I make a crosshair to be able to aline the rullers on the hoop as I do not have your crosshair lamp. I Just purchased the 4x4 Through Amazon.

I had ordered the 5x7 and 10.5x16. I have had them for awhile. Did not receive the book in them with instructions. Is there anyway I can get it. Thank you Diane Cockman

I need to get one of these hoops

@dzgns

Жыл бұрын

You can check out all our hoops here - bit.ly/3BGEyJy

Hi can thismagnic hoop be used on stelair xj1 machine

Hi from Coastal Georgia!!

Hello from South Carolina

the hoop for my Bernini ARTISTA 185 IS A DIFFERENT SHAPE - how would you recommend i apply the ruler tape?

Do you make a 4x4 hoop for a Bernina 880 Plus

Do they work with all machines

Where do I find the center marks my 200 x 200 magnetic hoop. I pulled up the file but the 200 x 200 not listed so I'm assuming it's dead center, but I don't want to be wrong.

in your blog there isn't a download for the large magnetic hoop. 18x12

Hi from Lebanon Illinois

I have an innovis 800 E . I am in Australia. I am looking at a dime magnetic 5x7 hoop but it doesn’t specifically say it’s compatible with my machine. I sent an email off To Dime but that stated that hadn’t tested it on that machine. I would appreciate any assistance before purchasing please

I have a Brother Innovis V3 Machine. Can I used on my machine ?

Love my magnetic hoops! However, I messed up my rulers 😔. How can a get replacements? Thanks for all you do!

@dianagolden1733

3 жыл бұрын

I did too. I centered it vs. centering it on the embroidery area. 😒

Is there a 4x4 magnetic hoop for Jane me/elna?

Have a monster hoop do you need a download for a solari to use full hoop

How is the fusible stabilizer removed from garment without leaving sticky on garment?

Will it fit a babylock ellgante?

How do I hoop a quilt.

Are the hoops compatible with Bernina/Bernette b70 Deco?

Do you sell the rulers in "inches", mine appear to be metric??? But they are not inches.

What are this houses behind you making this video. They are so very pretty.

Do these fit the dreamcreator brother vm5100

Hi From Belgium

What's the difference between mighty hoops and snap hoops magnetic hoops? How does it attach to the arms?

Hello from Alaska

Hi I,am in PRAIRIEVILLE Louisiana please let me where I cN find a 4x4 magnet hoop for a Singer

Hi from Australia

Can I buy the weightless quilter. I live in Curra, Queensland, Australia

Hi all from Danbury wi.

Please provide the crosshairs file for a Husqvarna Viking Topaz 30 machine. Many thanks.

I feel like the materials and stabilizers aren’t hooped as tightly, “drum tight”. How can we get them tighter?

Hi from Kansas

can't find file for crosshair placement anywhere

@BeadingBelles

2 жыл бұрын

Hi I finally found the cross hair alignment.It won't let me put the link here but if you go the blog and put in this"How to Apply Centering Guides on Snap Hoop Monster"hopefully the page will come up.It is only for the 6 x 10 and 4 x4 hoop.There are also instruction's where to find it on the instruction sheet that came with your hoop.

I also need new adhesive rulers to go around my snap hoop. Been looking. What do I ask for?

@dzgns

Жыл бұрын

Hi Vickie, you can order replacement guides for your hoop here - www.shop.dzgns.com/products/replacement-adhesive-rules-for-snap-hoop-monster?_pos=1&_sid=167987ab7&_ss=r

How do I get my multi needle machine to recognize the DIME 8 X 12HOOP?????

@netty3767

Жыл бұрын

I am having the same problem with the Janome 550 E. How do you get the machine to recognize these different sizes magnetic hoops when there are preprogrammed hoop sizes that come with these machines so I do not understand why they are saying they are compatible with these machines when some are clearly not. I paid a ton of money to get 4 different sizes hoops that said were compatible with the Janome 550E and the shipping was well over 200 dollars as I’m in Canada. Very disappointed this company does clearly not care to answer people’s concerns and problems they are having with the noncompatible hoop sizes they are saying are compatible!!!!!

Any chance you can include links for the products you demonstrate? Thank you

@dzgns

Жыл бұрын

All updated! Let us know if you have any more questions.

Can you purchase additional rulers?

@seffssweetsstitches2897

3 жыл бұрын

Yes you can, here's the link www.shop.dzgns.com/products/replacement-adhesive-rules-for-snap-hoop-monster

Hello from Arkansas

O k I meant , do these magnetic hoops work with a singer futura quartet embroidery machine

Please post site to get crosshairs. Thanks

@BeadingBelles

2 жыл бұрын

Hi I finally found the cross hair alignment.It won't let me put the link here but if you go the blog and put in this"How to Apply Centering Guides on Snap Hoop Monster"hopefully the page will come up.It is only for the 6 x 10 and 4 x4 hoop.The web address for the crosshairs is on the instruction sheet that comes with the hoop that you purchased although it seems it only cover the 4x4 and the 6 x 10 hoops

Do you send to Belgium ? I wanted to buy it for years but Dime don't send to Belgium.

@murieldrissen2468

Жыл бұрын

ze verkopen in frankrijk bij créatrices broderies machines.

Where can we get the Small Towns. I thought I had them as well as all the doors but can not seem to locate them .

@dzgns

Жыл бұрын

The Small Town Charms are no longer available, they were part of the 2021 design collection. We have a new free design collection called On the House you can check it out here - www.shop.dzgns.com/collections/designs-projects/Designs-&-Projects_Free-Designs

Which one fits BabyLock Elegante?

@dzgns

Жыл бұрын

You can check our Hoop Compatibility Chart - www.shop.dzgns.com/pages/machine-compatibility-chart

Do they have one that is compatible with Husqvarna viking

@dzgns

Жыл бұрын

Here you go - www.shop.dzgns.com/collections/designs-in-machine-embroidery-snap-hoop-hooping-systems/products/snap-hoop-monster-husqvarna-viking-1?variant=31063507861573

Are all hoop guards the same? My new ones don’t have the curved corners.

@dzgns

Жыл бұрын

We have three types of Hoop Guards: For Monster Hoops, Standard Hoops, and the Jumbo Hoop Guard for larger Monster Hoops. We would need to know specifically the one you have to further assist you.

Where is your blog so I can find the crosshair you mentioned?

@dzgns

9 ай бұрын

Here is our blog post on how to apply the centering guides blog.dzgns.com/2020/03/how-to-apply-centering-guides-on-snap-hoop-monster/

Hi from spokane wa area

👍🏻👍🏻👍🏻

Doers the hoop work for 5x7 brother pe800?

@dzgns

Жыл бұрын

You can check out our compatibility chart here - www.shop.dzgns.com/pages/machine-compatibility-chart

I bought a magnetic hoop and my Baby Lock Solaris does not recognize it. Any suggestions on what I might be doing wrong?

@dzgns

10 ай бұрын

Hello! For better assistance you can reach out at customerservices@dzgns.com or call us toll-free at 1-888-739-0555

What hoop would you recommend for quilting on a Janine 550c. Thx

@jo-annebatho8413

Жыл бұрын

Janome not Janine. Darn spellcheck

@dzgns

Жыл бұрын

Hi Jo-Anne, we currently have hoops for the 550e not 550c, you can always check out compatibility hoop chart - www.shop.dzgns.com/pages/machine-compatibility-chart

Martha from North Carolina

Can you use the plastic hoop guards with the magnetic hoop?

I was able to download the file for 6x10 crosshairs placement, but there is no 5x7….

@netty3767

Жыл бұрын

I would like to know the same answer. So unbelievably confusing and youd think for the cost they charge for these hoops they would come with guides already on the hoops instead having to apply these ruler stickers. Will never order from here again.

Hi from grandma Cassy from Belgium

Do you have to do something special to your machine for it to accept these hoops?

@dzgns

10 ай бұрын

No you do not. If the correct size is selected then you should not encounter issues with the hoop.

Please can someone tell me how your magnetic hoops are all compatible with the Janome 550E?? My Janome machine hoop sizes are 5.5 x 5.5/ 5.5 x 7.9 / 7.9 x 7.9 / 7.9 x 14.2 SO HOW DOES YOUR 5x7 that you say is compatible work with the preprogrammed hoop sizes on my machine? I put the 5x7 on the machine and cannot get it centered. Also your downloadable crosshairs are so confusing there is a 6x6 for the JEF file and and 6x10 JEF crosshairs so I when no idea how these crosshairs apply to the magnetic hoop sizes. If someone could please clear up this that would be greatly appreciated. So disappointed!!!!

@dzgns

Жыл бұрын

Hello! For better assistance you can reach out at customerservices@dzgns.com or call us toll-free at 1-888-739-0555

@murieldrissen2468

Жыл бұрын

@@dzgns that really is not an answer.... I read a lot of the same comments and now I am in this same case too. Janome 550E and a hoop JM1 that doesn't match at all

Did you enclose the cross-hair file? If so, where do I find it? Please advise.

@minniegonzalez591

2 жыл бұрын

I would also like to know. cannot locate it?

@Handcrafted.by.Linda.Denise

2 жыл бұрын

@@minniegonzalez591 I sent DIME a email and they sent me the file.

@BeadingBelles

2 жыл бұрын

Hi I finally found the cross hair alignment.It won't let me put the link here but if you go the blog and put in this"How to Apply Centering Guides on Snap Hoop Monster"In the search box,hopefully the page will come up.It is only for the 6 x 10 and 4 x4 hoop.

@Handcrafted.by.Linda.Denise

2 жыл бұрын

@@BeadingBelles Thank you!

Placement stitch link?????

@BeadingBelles

2 жыл бұрын

Hi I finally found the cross hair alignment. It won't let me put the link here but if you go the blog and put in this"How to Apply Centering Guides on Snap Hoop Monster"hopefully the page will come up. It is only for the 6 x 10 and 4 x4 hoop.The web address for the crosshairs is on the instruction sheet that comes with the hoop that you purchased although it seems it only cover the 4x4 and the 6 x 10 hoops

I live in Texas. What is the stores address?

@dzgns

8 ай бұрын

We are located in Dallas, however, we are an online store.

where do i get the template for the crosshairs

@stephaniedaniels8607

2 жыл бұрын

It's a free download

@lynsellers2352

2 жыл бұрын

@@stephaniedaniels8607 where is it located.?? She states it to be added to the comments but I don't see it at all

@BeadingBelles

2 жыл бұрын

@@lynsellers2352 Hi I finally found the cross hair alignment.It won't let me put the link here but if you go the blog and put in this"How to Apply Centering Guides on Snap Hoop Monster"hopefully the page will come up.It is only for the 6 x 10 and 4 x4 hoop.The web address for the crosshairs is on the instruction sheet that comes with the hoop that you purchased although it seems it only cover the 4x4 and the 6 x 10 hoops

Shirlee from Ontario Canada

Good morning

Are magnetic hoops safe for your machine? I own the snap hoop but scared to use it.

@ivetteyabdiel

2 жыл бұрын

My fear exactly, I feel the hoops that comes with the machines are so light…. But these metal/magnetic hoops are way heavier…

Peg from NY

Hello, I'm Simonne from Belgium

Does this hoop work sorry Typo

Janet from Wales

What is the name of the Monster hoop ruler replacement on the website?

@dianagolden1733

3 жыл бұрын

Found it....they are called Replacement Adhesive Rulers!

His hoop work with a future embroidery machine ?

My hubby bought me the 5x7 hoop for Christmas. I was the happiest girl until I attached it my machine. I double checked the 5x7 hoop and started stitching a 5x7 design and immediately broke a needle. I repeated the process 3x even using only stabilizer the 3rd time so I see exactly why my needles were breaking. The magnetic hoop is smaller then 5x7 area and my machine hoops are. I'm so disappointed. I put everything back in the box it came in and stuck it on the shelf. I haven't touched it since. I have a janome 500e and the box says it's for my janome 500e but it's not even close to the correct size. What a waste of money.

@netty3767

Жыл бұрын

Hi Deanne I have the same problem and I am so mad!!!! They say the 5x7 hoop is compatible with the 550E and and they closest Janome hoop size to this is the RE20b 5.5x7.9….how does the magnetic hoop work with this? The machine doesn’t centre the hoop and I thought because it said it was compatible it would work somehow so I have wasted money as well and am so disappointed. Do not understand how this is suppose to work. And I see there is support here for people’s questions that have already spent their hard earned money and no support really.

@murieldrissen2468

Жыл бұрын

@@netty3767 I just only just tried mine for the first time (arrived today) and EXACTLY the same problem. the crosshair is not even near the center of the hoop. so we loose a lot of space. I have a 550E as well... i wonder if I shouldn't send it back. Do you use it now? 2 months have passed since your message

I,am in PRAIRIEVILLE Louisiana Barbara Bradford I’m

For as expensive as these hoops are, I think the rulers should be on already. Just saying.

@dzgns

Жыл бұрын

The centering guides are not used by all of those who own Snap Hoop Monsters, so its a preference.

@teresa1185

7 ай бұрын

100% agree. I don’t like the ruler. I’m still trying to decide if I like the hoop. Maybe with practice?

Hello from Ohio!

Hello from Indianapolis