Tips Revealed! - Fiberglassing a Boat Hull S3-E15
Тәжірибелік нұсқаулар және стиль
Great tips for fiberglassing a boat hull. In building "Victoria", the 9' tender for "Arabella", boat builder Bob Emser shows the proper way to add fiberglass cloth and epoxy resin to the boat hull. Several tips are revealed from making perfect epoxy fillets, adding micro-balloon fairing filler, final sanding too priming with 2 part epoxy primer.
Why one layer of fiberglass cloth? One of the goals of building the tender is that Steve Denette requested the boat be as light and strong as possible. He is fully aware that those two requests will be a balancing act to dial in the correct proportions. The answer came quite easily when we discussed Victorias construction with John Harris, owner of Chesapeake Light Craft. The full discussion can be viewed on A2A video “LIVE from 2022 The WoodenBoat Show”
One question I posed to John was other stronger fabrics like such as Dynel and Xynole both are much higher in abrasion resistance. Unfortunately they also require a lot more resin to wet out, as much as three times more than glass cloth. Because of the large weigh difference John’s recommendation was a single layer of glass cloth on the outside and inside of the hull. The combination of inside and outside will give the best weight to strength ratio.
“When such a resin (epoxy) is reinforced with glass fibers the resulting composite can have a tensile strength between 45,000-50,000 psi. It also becomes extremely resistant to impact damage. This high strength for the relative low weight is the fundamental reason that fiberglass composites are popular.”
fibreglass.com
“If you’re going to make it, make it beautiful.”
Bob Emser
Interested in building a boat with me? Check out my online boat building course.
www.boatbuildingbootcamp.com
Subscribe for more Boat Building from The Art of Boat Building:
kzread.info...
Share this video with a friend:
• Tips Revealed! - Fiber...
How to support The Art of Boat Building.
Purchase Official Merchandise here:
www.bonfire.com/store/the-art...
Become a Patron:
/ theartofboatbuilding
Watch next
Recommended Playlists
Building Victoria. Arabella's Tender
• Season 3 - Victoria
Carvel Planking Playlist:
• Carvel Planking
Haven 12 1/2 Playlist:
• Season 2 - Haven 12 1/2
Tool Making:
• Tool Making
Let’s connect:
Facebook:
/ bobemseramericansculptor
Instagram:
/ artofboatbuilding
Linkedin:
/ bobemser
Bob Emser American Sculptor:
www.bobemser.com
#theartofboatbuilding #artofboatbuilding #makeitbeautiful#woodenboatbuilding #buildingasmallboat #buildingasailboat #shipwright #toolbuilding #Haven12 #herreshoff #shipwright
Пікірлер: 337
Bob Emser is literally the Bob Ross of boat building. Calm demeanor, knowledgeable, and charitable with passing his knowledge on. Great work Bob, I'm looking forward to when Victoria gets to settle into her home on Arabella!
@TheArtofBoatBuilding
Жыл бұрын
Thank you Sam! I appreciate your kind thoughts. Thanks for watching! Bob
@petraberta
Жыл бұрын
Read
@davidc6510
Жыл бұрын
The Bob Ross of boat building ... that totally fits this channel! Happy planks, smooth calm paint, lovely lines, and just plain beautiful.
Steve is going to have one fine tender. Your attention to detail and his match up quite nicely.
She is getting more and more beautiful with each video and so much work goes into the preparation of each step, it's going to be a really special moment when Victoria is united with Arabella.
Victoria is taking shape. It is BEAUTIFUL.
Outstanding Bob. Looking forward to the tiller challenge. I sense some bronze casting might be coming up. Thanks
@TheArtofBoatBuilding
Жыл бұрын
Hi Rick, Indeed already have some castings in the works.
@plainnpretty
Жыл бұрын
I’m looking forward to the tiller challenge.
What an artist and teacher you are. Its an outstanding project and, perhaps more significant than your skills, is your generosity in providing this beautiful gift to Steve and the A2A project.
Thanks for your observations i was wondering about the second and third coats !!!!!!!😀
Teachers are born, not made. Bob, you're a natural born teacher! Thanks!
Absolutely beautiful work Bob. You aren’t just building a boat, you’re building a piece of history.
Waiting for Sunday Lunch; perfect! Always good for the soul if not for the appetite!....rr Normandy, Fra.
She's really starting to look like a boat, Bob! Great stuff
Dog gone it Bob that is beautiful. Thanks for sharing.
Another great episode sir
Beautiful work like always, Bob! Thanks for sharing it with us.
Super excited to see the progress! Thank You!
So fun to see this getting done. Thank you for posting it made my day.
Very nice! I can hardly wait for the next episode.
beautiful work
She is coming right along and looking great.
Turning out beautifully, Bob!
Awesome work.
This will be the finest tender any cruiser has had.
Beautiful boat, beautifully done video. Your work is impeccable. Thanks, Bob!
Simply amazing!
Terrific job Bob.
Fiberglass Cloth - YES this is the way to do it... You are spot on with using a roller to apply epoxy to and through the cloth. Pouring on and spreading with a scraper is NOT a good way, using a roller is by far the best way.
American workmanship at its finest!
Amazing job always fun to watch
Well done
Great video and tips. Thank you for that.
Once again, simply awesome. A pleasure to watch you and learn.
Thanks Bob for all the tips on fiberglassing! We are about at the same stage with our strip hull kayak so the timing is perfect. I really appreciate your instruction and channel!
Superb, careful boatbuilding. Beautiful hull. I look forward to every episode. So glad you were tasked with this for Arabella's tender!
Great work
I love watching you work!
Thank you Bob for an outstanding episode. Victoria is looking fantastic. Looking forward to seeing her color go on and what you do with the tiller and rudder. Have a great week ahead.
I love to watch someone that has a passion for what they do. Thanks for sharing.
Such beautiful workmanship and attention to detail Bob. Victoria is going to be quite the little boat!
Nice work Mr. Emser. Sorry about my patience missing your airing of episode 15 last weekend. It was worth the wait. Great job 👍
Great work Bob! She really looks good.
Brilliant episode yet again
Neat! Hadn't come across this filling method before! Looking so good! 😍
Excellent tips and tricks! Victoria is coming along beautifully!
Nice sharing rebuilt boat fibreglass ❤
Thank you for another enjoyable and enlightening video!
Excellent video👍
Way to go! Looks great.
Can’t wait to see her finished.
Bon et beau travail !!! Bravo !!!
Amazing quality work as always, that is beautiful too. It is great to see your careful attention to detail, whilst maintaining a decent work rate. All the best from the U.K.
Excellent video, the fibre glassing, you made it look so easy. The tender is moving at a good pace and I sure Steve will be delighted when its finished.
Bob thank you for this great episode.
Your work is art. I admire your attention to detail. Watching many of your videos, I had the opportunity to gain knowledge helpful in renovating my old wooden yacht. Thank you and best regards.
Good video
Looking better and better!
very nice work
Fascinating!
What a great episode. Much accomplished and very satisfying to watch.
It's good to see master's at work great job guys
Absolutely lovely. I look forward to seeing her float. Great instructional video about using epoxy. Thanks.
장인정신이네요. very nice video
Looking good Bob. My brother who was a professional painter told me to store your paint cans upside down, especially a few days or weeks before use. This way the solids end up on the lid, half mix themselves when you right the can, and don't have to be dredged off the bottom of the can in order to mix.
Extremely excellent videos. You give sufficient information of each step to convey the techniques used and reasons for using them, as well as mentioning alternatives. You don't bore us with hours and hours of sanding that is basically the same for the duration. Love your channel. 👍👍👍👍
I love your methodology! I don't seem to be able to duplicate it, but I love it! Craftsmanship at its highest level! Goodonyas!
While watching the last moments of Bob painting the hull, I see a small speck on the hull..... it took me a moment to realise that there was a speck on my screen.... but then since we know Bob is some kind of a pefectionist, this was the only thing that could have been the reason that I saw a speck in the first place. Beautyful work from Bob again.
@Meier760
Жыл бұрын
Me too!!!!🤣🤣🤣🤣🤣
Great Video !
Just lovely.
Looks great.
Just amazing!
Awesome love the videos as always
Excellent solution. Very classy and functional.
Thank You For Making.... Our Pleasure... No Doubt!!!
Perfectionist at work!
I have been following Arabella now for years. IThis is the first one of your pieces of that puzzle I have seen though. What a terrific job on all of it,. GREAT filming/ editing too!
I am already learning some new technique from this video.
She looks great! This is definitely going to come in handy when I start refurbishing my little 8 ft fiberglass dinghy that was probably made in the 50s or 60s and had been sitting in a neighbor's yard for decades and in my yard for the past few years.
Victoria is looking really nice. 😀👍
You stay so clean.
Fantastic work, Bob! 😃 I should confess, I like wooden boats with the wood visible... But it's looking sweet with the primer! Anyway, stay safe there with your family! 🖖😊
Perfection. You never make mistakes.👏👏
@TheArtofBoatBuilding
Жыл бұрын
Hi John, I wish that was true. I just try to do my best. Thanks for watching! Bob
I love what you do.
I have a general question: I recently bought a 1965 blue Jay wooden sailboat, that I would like to fiberglass, the bottom has been painted since 1965. it is made out of thin plywood do I have to take the hull down to bare wood? or can I just generally sand the hull? I will read down and see if any one has asked this queston
Beautiful
Early coffee. I'm thrilled.
That was an extra good episode. Lots of solid content.
@TheArtofBoatBuilding
Жыл бұрын
Thanks
We finally get to see her lines. Looking great. Traditionally, a rudder like that would be removable, with the pintels and gudgeons slip fit, held in by gravity and a safety line. Curious to see what you come up with.
@TheArtofBoatBuilding
Жыл бұрын
Hi Dirk, Yes, I show the transom treatment in S3-E11 kzread.info/dash/bejne/aGmayqRvcZuwk6g.html In the next video I'll be showing how the finish surface is handled. Thanks for watching! Bob
Brilliant.👍
I'm looking forward to learning what manner of beast an 'out whale' is ;) Also seeing the inside will be exciting for me. It's such a beautiful shape. The wonders of boat building seem deep and bountiful, I love it!
@dilboat
Жыл бұрын
The gunwales (pronounced gunnel) of a boat are reinforcing strips of wood that run on the inside and outside of the top of the boat to give it strength and rigidity. Otherwise the side of the boat would flex too much. The outwale is the outside gunwale.
@musicbro8225
Жыл бұрын
@@dilboat Thank you kindly, well explained. So not even related to the whale then :) One of the wonders of naval heritage would definitely be the wordage (etymology).
Parabéns pelo capricho
Echo the tip on laying the fiberglass down dry. I made a go at placing mine wet. Sticky mess. Bubbles, creases, etc...Thanks Bob!
Old painters trick. When pouring from a paint can , tuck a twisted paper towl into the lid groove with a screw driver before pouring. Pull it out after pouring and you have a clean easy to reseal can.
@TheArtofBoatBuilding
Жыл бұрын
Nice one! I’ll give it a try.
Fastidious in such a good way! Excellent episode
Beautiful work, Bob. It is coming along nicely. But from someone who has breathed in much too much dangerous stuff in my shop, I do however find it hard to watch you sand without a mask and brush all that dust into the air rather than vacuum it up.
Nice!
Perfection!
Hello,Bob! As always perfect! I wish you all the best!
Super Grandpa....The Best dah , luar biasa...Salam Hormat from Lik Bronang Chanel
Thank you for your video I liked it ,yes I will see for next video.
@TheArtofBoatBuilding
23 күн бұрын
Thanks for watching!
Gracias por dejar ver su trabajo.Esta quedando hermoso.bendiciones.
@TheArtofBoatBuilding
Жыл бұрын
un placer, gracias por ver
Wow I’m learning well from you sir 👍thanks for teaching so well 🤗 regards Bobbyash