#1 Most helpful downpipe removal video I’ve seen yet ! Thank you.
@MoxxyEvo2 жыл бұрын
Duuude thank you for the in-depth explanation. This was all very helpful information.
@FourthandFoles3 жыл бұрын
Got a COBB downpipe coming in next week. This is very very helpful my guy 💪
@theELiTEboarder3 жыл бұрын
Thanks for the tips, just got mine on after spraying all bolts with pb blaster every day for a week straight. You’re right, the beer was needed lol
@SpitfireGaming7404 жыл бұрын
Thank you ! I have a base lancer with evo x turbo , using a custom downpipe , basically the heatshield near the downpipe can’t be secure properly since the downpipe is custom , and it’s rattling like crazy , and I finally found out where it was .
@BruTJezuS
3 жыл бұрын
yooo I have a base lancer but I’m doing a Ralliart turbo set up on it , is there any way I could contact you because I have a couple questions 😅
@joef40307 ай бұрын
Excellent vid, right to the point. Thank you for this
@pimpc4423 жыл бұрын
PB blaster is key and patience when removing any bolts. Broke one on my ETS open dump install, pain in the ass.
@waynecarruthers5889 Жыл бұрын
Cheers man, stock turbo so i aint gonna bother doing downpipe. Did exhaust manifold which was very tricky
@d14_x802 жыл бұрын
Great how to. If you’re going to be doing this job do yourself a favor and get a right angle impact. It will help tremendously. Proper tools go a loooong way
@denniskonko83353 жыл бұрын
Awesome vid
@ozaixd3 жыл бұрын
Very helpful
@allanmorris14384 жыл бұрын
Thank you for the clear explanation of this, how is it removing the down pipe with the spring bolts? I have 20,000 miles on my Evo X and I’m wanting to install the COBB down pipe and hi flow cat.
@evolicious-x
4 жыл бұрын
Urs should.be pretty easy. I took off my stock down pipenwhich had 79k miles. Sprayed some wd30 and it came off no.problem. had to use a lot of strength to get them loosened tho. Lol
@bEEBO178
2 жыл бұрын
Just removed the two spring bolts on mine. Ended up using a ramp as it was too hard with jacks on my drive. Took a fair bit of strength to remove!
@PnwPinoy96 Жыл бұрын
I’m never going to work on a Evo x with an oem downpipe again 😂. No wonder why he needed a beer!! 😂😂😂
@monkeyzer07 ай бұрын
Amen!
@zijie-he3 жыл бұрын
Really a tough job.
@Fakeyeetvo4 жыл бұрын
did you remove that stud nut from the top or bottom of driver side?
@solraczetined59513 жыл бұрын
What did you used to remove the stud from the driver side?
@chaovang50703 жыл бұрын
You probably found out already but that 1 piece Invidia pipe will not work with that downpipe, you need a testpipe and not a 1 piece dp/tp
@Bostonprops3 жыл бұрын
You’ve never changed your own clutch with out a trans jack 😅
@waynecarruthers5889
Жыл бұрын
😮
@ralphymathew27443 ай бұрын
I just ordered mine 😂 I kinda regretting it lol no
Пікірлер: 24
#1 Most helpful downpipe removal video I’ve seen yet ! Thank you.
Duuude thank you for the in-depth explanation. This was all very helpful information.
Got a COBB downpipe coming in next week. This is very very helpful my guy 💪
Thanks for the tips, just got mine on after spraying all bolts with pb blaster every day for a week straight. You’re right, the beer was needed lol
Thank you ! I have a base lancer with evo x turbo , using a custom downpipe , basically the heatshield near the downpipe can’t be secure properly since the downpipe is custom , and it’s rattling like crazy , and I finally found out where it was .
@BruTJezuS
3 жыл бұрын
yooo I have a base lancer but I’m doing a Ralliart turbo set up on it , is there any way I could contact you because I have a couple questions 😅
Excellent vid, right to the point. Thank you for this
PB blaster is key and patience when removing any bolts. Broke one on my ETS open dump install, pain in the ass.
Cheers man, stock turbo so i aint gonna bother doing downpipe. Did exhaust manifold which was very tricky
Great how to. If you’re going to be doing this job do yourself a favor and get a right angle impact. It will help tremendously. Proper tools go a loooong way
Awesome vid
Very helpful
Thank you for the clear explanation of this, how is it removing the down pipe with the spring bolts? I have 20,000 miles on my Evo X and I’m wanting to install the COBB down pipe and hi flow cat.
@evolicious-x
4 жыл бұрын
Urs should.be pretty easy. I took off my stock down pipenwhich had 79k miles. Sprayed some wd30 and it came off no.problem. had to use a lot of strength to get them loosened tho. Lol
@bEEBO178
2 жыл бұрын
Just removed the two spring bolts on mine. Ended up using a ramp as it was too hard with jacks on my drive. Took a fair bit of strength to remove!
I’m never going to work on a Evo x with an oem downpipe again 😂. No wonder why he needed a beer!! 😂😂😂
Amen!
Really a tough job.
did you remove that stud nut from the top or bottom of driver side?
What did you used to remove the stud from the driver side?
You probably found out already but that 1 piece Invidia pipe will not work with that downpipe, you need a testpipe and not a 1 piece dp/tp
You’ve never changed your own clutch with out a trans jack 😅
@waynecarruthers5889
Жыл бұрын
😮
I just ordered mine 😂 I kinda regretting it lol no