GET YOUR MERCH HERE! teespring.com/stores/arc-one-army-apparel

I loved this video with narration. It adds much more content to the material that is already of excellent quality.

I’m a CAD designer it’s great to see the fabrication side. Music and Narration is awesome! Thanks for sharing your experience!

@sel2c

Жыл бұрын

Same here.

Yes mate, loved the narration. Spot on not always including arc shots. There’s plenty of vids out there on that but not many on the fabrication side. Love it 👍

@ypaulbrown

3 жыл бұрын

I agree

What you do and demonstrate is so brilliant. I have a friend whom is a professional welder and fabricator and he sends me pictures of the work jobs at different stages during the build phase but I never saw how he preped, set pieces at angles, checked, and I was so interested. I think I'm the only person he does that with. Just being a home welder/fabby, I never knew some of the finer techniques he would have used to achieve the finnished article when he sent me pictures. Your video's demonstrate just that, I was gobsmacked the first video I watched, my jaw was on the ground. Awesome man

Loved the fabrication.....great video nice music...thanks for sharing ..i used to work on pipefitting..now not so much because i live in a place where we dont have much of that kind of work but still is my favourite kind of work....

Becoming one of my favorite channels. Glad to find it in my suggestions box!

I’m thoroughly enjoying all the content you have on your channel! Keep it up 👍🏻

Great job i like the narrative and the music finally a welding video without noisy electric guitars

Brilliant videos I like the commentary over it keep up the good work

The music, calming voice, and the demonstration are all great. Solid video brotha

Very good mate, on the first one i always fully weld the weld necks to pipes before I add any fittings so the fittings don't get in the way of the circ welds, it's ok in this instance only being small sockets but if they were small branches it would be different, I'll assume you don't have a radial drill to drill the socket holes on hence the cutting gear. On the second one the eccentric reducer ,stand it on the bench and square a line up its flat back so you know where it's center is for the orientation of it and on the flanges even though ye using pegs and spirit level to get it all off centers just mark a chalk center line between the flange holes on the front face,just good practice for when you do bigger pressure vessel stuff. The 2 foot ruler stuck in there for the welding gap 😂 I'm still doing that after 40 years. The narration is a great addition, coming on great and makes me pleased to see a young lad enjoying fab and welding, keep it up

Really great job !! :) A young welder from France 👨🏼‍🏭

@ARCONEWELDING

4 жыл бұрын

Thanks 👍

Been waching since the first vid i am an apprentice useing fronius welders myself and learning a lot from the vids about pipe fit up tricks

@ARCONEWELDING

4 жыл бұрын

thanks for the support!

Love the videos the welding and fabrication skills.please keep them coming 🙏🏻and loved the intro to but preferred the old type of back ground music lol.

Your good at what you do, great job.

You really make a good pipe fitting video, I really enjoyed. Thanks.

@ARCONEWELDING

4 жыл бұрын

Glad you enjoyed it

Im learning so much from you, ty sir for your videos :)

Hey thank you. I work in a shop in Utah. I’m a fitter on the pipe support side. I’m learning a lot . The next time the pipe side gets way behind I’m going to offer to fit some to help them out. It would plow their mind if I could pull it off.

Man those spider clamps come in handy. Awesome work man your Fitting style is bad ass. Ive used some of your tips at work helped speed up some of my Fitting techniques.

@ARCONEWELDING

4 жыл бұрын

that's so good to hear!

Loving the background music

I like a 1/4" gap myself for a short arc stringer on a rollout. That way you're not having to open the bevel up towards the end of your weld

Keep up the pipe fab videos man. Not enough quality pipe fab videos on KZread

I really liked your video. You have good experience in this job

Amazing job, bro, greetings from Mexico :)

Would you please include drawings? So we would be able to follow whole process of fabrication.

Nice job buddy. Like the way you fab up your stuff. No messing around you just get it done. That would have taken me longer than your hour and a half. Tell your boss I said he should buy you a beer after giving you a fat pay check!

Bro your 1 beed caps are insane! You need to show me how you do it!👌🏾

You sound like lloyle carner with that music going on my man. Nice job

That's Nice welding!!!😆😆 Thanks William Orange county, ca.

Great video.. Greetings from Serbia.

wow great job, pretty nicely done.. salute

I need to start listening to jazz when I fab now.

Thank you very much 👍

good stuff mate

narration is great , well done. You burn holes nicer than I drill them , nice to see you left the ths wrong reducer bit in the video though .

@ARCONEWELDING

4 жыл бұрын

Glad you enjoyed it, and yeah i have the power of editing but im still only human, we all make mistakes.

Do you mind sharing your voltage and wire feed speed for the root, fill, and cap passes?

The background music is fantastic for this kind of video. So many people use electronic music and it just sounds cheap and tacky. Jazz gives everything class.

@ARCONEWELDING

4 жыл бұрын

appreciate that mate

Great Video guys, which flange standard and material do you use? is this a ductile iron flange?

Mate love the music

Mad skill my friend. I keep seeing MAG. So you are welding with active gas, what are the applications or should i say when do you need to use mag?

Nice 1 mate refreshing to see British lad showing his work 👍🏻 where you based ?

when measuring the over all do you go from gramophone to gramophone or just edge to edge?

Good job ! :)

Good work!

@ARCONEWELDING

4 жыл бұрын

Thanks!

Excelente video! Bro estaría chingon que pusieras subtitulos en español estaría genial, y por último enñanis hacer los burritos de carga como los que utilizas, abrazos y saludos desde México 🇲🇽 🤓 👍

Top videos sir. Well done.

@ARCONEWELDING

4 жыл бұрын

Thank you kindly

Nice video, will be nice to make a video of your tools and shop and maybe how to build your own tools

Fabrication d'une manchette 6"/4" avec une réduction excentrique 6"/4".bride 6" et bride 4".

A 10mm gap! I fab at work and pass it on to the welders, they would refuse to weld it. Come show them how it's done. Loving the tunes!!!

@eddiesiswanto8327

3 жыл бұрын

I agree with need small gap.

fantastic work, you could explain a little about welding parameters and how to calculate the space between the pipes?

@ARCONEWELDING

4 жыл бұрын

Great suggestion, ill add that in my next video

Good job bro

@ARCONEWELDING

4 жыл бұрын

Thanks

where did you get those spider clamps?

Fantastic video 🤯🤯🤯🤯

@ARCONEWELDING

4 жыл бұрын

Glad you enjoyed it

@donwelder2528

4 жыл бұрын

The real master bro by blees sorry bad ingles from chile

Bon Boulo 😆😆👍👍

What is the name that thing you put inside the pipe

Super 👌 Dada Nice video

👍

👍👍👍

Nice job bro Chappieworkz

Wish you could teach me how to do this.

Здравствуй. Красиво у тебя получается, рентген ультразвуковая дефектоскопия?

i missed how you lined up the reducer to the flange, 2 hole?

@ARCONEWELDING

3 жыл бұрын

By eye tbh

wish you did some tig T_T

😀👍

what music is this?

What square does he use as a gap wire

@TheCummins1212

4 жыл бұрын

waldo oblaw Looks like strap welded in a V

I wish reducers came with a center mark stamped on them.

@ARCONEWELDING

4 жыл бұрын

i knw something so simple will make our lives so easier

어느 나라 입니까?

Plus you aways got to check the measurements on the last fit before you tack it buddy

ciao sei bravissimo ma la riduzione eccentrica se non la tracci non potrai mai metterla a 2 fori...ciao

🥰🥰🥰🥰🥰🥰🥰

How to install and square plance to a long length pipe sir thank you

Weld neck flange PCD. unncenter. reducer. 6×2inch.150×168×524 50×60×189. Pipe. Ka linght. 100.DN. Total linght. Kitna. Hai

@sanjaysharmagazipuri9251

Жыл бұрын

Olet. Threadid.

@sanjaysharmagazipuri9251

Жыл бұрын

Pipe. Ka. OD.

should invest in some two-hole pins, not bolts haha. Also, why the heck aren't you putting bevels on your pups? I can only assume you dont have any real code you're welding too lol

@ARCONEWELDING

4 жыл бұрын

when i grind the tacks i prep the pipe at the same time

You just missing up the RF flange by tacking it like that on the table with the ground

Slip flange PCD. Pipe. Ka. OD

R,a,f

Зерколо фланца 👎