Thank you quick 2 min video on something that it takes some 15 mins to explain. 💯💯💯💯
@richpaulodesign6137 Жыл бұрын
These easy steps are helpful for beginners hoping to see more of your videos GODBLESS you
@BlackMantisRed2 жыл бұрын
I saw someone on Facebook creat something similar to this, it’s very impressive
@dreport9433 Жыл бұрын
Thank you for making this tutorial. I have always wanted to achieve this bit never knew how.
@michelea.w.96972 жыл бұрын
The video is very clear and simple, thank you! I will try this method
@skr932 жыл бұрын
Thanks for showing it steps by steps
@TheFrayedBrush Жыл бұрын
Great little tutorial. Sub’d.
@itmfl20462 жыл бұрын
i still have so much to learn.
@mecha_studio_official8 ай бұрын
What psi you use for your air brush? Do we need to adjust psi when doing shading layers?
@davenoi2 жыл бұрын
Cool man
@novianandrian Жыл бұрын
How is the thinner + paint ratio you use for the White color?
@baconace Жыл бұрын
What ratio are you mixing the primers in step 1?
@pandafoo10453 жыл бұрын
Great tutorial 👍👍
@customtips3207
3 жыл бұрын
Thank you :D
@doomrex55902 жыл бұрын
can you do this shading without a airbrush like a diffrent method
@taotran56883 ай бұрын
How many psi did you use on step 2 and 3?
@justinhealey24084 ай бұрын
Beautiful if using an airbrush
@gir2402 жыл бұрын
For the over spray of white does it have to be white? If I want a red color do I overspray with the red over the black and white or do I start with black to red to red with 20%more thinner?
@customtips3207
2 жыл бұрын
Good idea, I think first step after primer starts with dark red or brown, step 2 use white or pink and step 3 use red with 20% more thinner, it would be great.
@ricardocordero11546 ай бұрын
Amazing !
@Pantifo2 жыл бұрын
God, i feel like such and idiot, wondering why I couldn't get better preshading effect.... I hadn't been further thinning my paint for final coat
@dracowing142 жыл бұрын
great videos please make more tips.
@customtips3207
2 жыл бұрын
Thank you. If I'm free, I'll come back.
@mrniceguy0531
Ай бұрын
@@customtips3207what psi do you used?
@shotlikekennedy97352 жыл бұрын
Would you mind sharing what PSI you were spraying your Mr Hobby paints at? I keep getting thick layers that cover underlying details.
@emperorhadrian6011
Жыл бұрын
You have to use more thinner
@amirulnazmi57412 жыл бұрын
When you shade do you take out the spray tip? Thanks
@customtips3207
2 жыл бұрын
Yes, but you can use another airbrush cap that makes you see the spray coming out of the airbrush.
@jackysss3 жыл бұрын
Helo, Whats size the needle you use, 0.2 or 0.3? And whats the psi when painting the white colour after priming? Look so smooth when painting the white colour
@customtips3207
3 жыл бұрын
Use 0.5 all process but can use 0.2-0.4 I focus on trigger control, White after priming I use 12-15 psi and after that use 20 psi
@glui2001Ай бұрын
Wouldn't you get a similar effect by making the base white color, then highlight the edges/grooves black, then the white overspray?
@dambrony1394
29 күн бұрын
I think its more control over shading if he started with gray Like the 'blur' source comes from the white, instead of the gray.
@glui2001
29 күн бұрын
@@dambrony1394 Interesting perspective.
@prawitsantisukpotha27482 жыл бұрын
Just a few question if i want to make others color (red with shading), how i have to do? (I'm planning to make sword impulse gundam custom).
@customtips3207
2 жыл бұрын
After primer start with dark red(or red+black 10%) or brown. Step 2 use bright red you can mix red and white for the desired shade. And step 3 with same color in step 2.
@yermongo Жыл бұрын
I wonder if this can be done with aerosol cans. I don't have an airbrush.
@ackmedzambosama5327
6 ай бұрын
Try post shading with powders
@erraddict2 жыл бұрын
How long do you wait in-between coats? I'm so impatient
@lazyhydroponicsandstuff3682
2 жыл бұрын
You can use a hair dryer if your that impatient but I just wait a day
@customtips3207
2 жыл бұрын
yeah 1 days for sure.
@benjaminchristeanlagman24082 жыл бұрын
How to get the 20% thinner computation?
@customtips3207
2 жыл бұрын
use feelings don't be serious But don't let it be too liquid.
@natalebabbo-gunplaanddioramas2 жыл бұрын
Excellent tutorial. For small parts you need a very steady hand with the airbrush. What airbrush did you use and what’s the needle size? 0.3? Thanks
@customtips3207
2 жыл бұрын
in this clip is just no brand airbrush and it is 0.5 but focus on trigger control
@natalebabbo-gunplaanddioramas
2 жыл бұрын
@@customtips3207, thanks! I imagined that, but wanted to be sure. You sure show great trigger control in the video! 😊
@customtips3207
2 жыл бұрын
@@natalebabbo-gunplaanddioramas Thank you :D
@XzDAmaceАй бұрын
This video isn’t helpful I put primer and mr color and it’s not coming out of my airbrush, before I put it in the air brush is it supposed to be wet or something? I’m a beggine
@fatherboots7714
26 күн бұрын
This video isn’t about how to use a spray gun, it’s specifically about how to do shading with a spray gun
Пікірлер: 49
Thank you quick 2 min video on something that it takes some 15 mins to explain. 💯💯💯💯
These easy steps are helpful for beginners hoping to see more of your videos GODBLESS you
I saw someone on Facebook creat something similar to this, it’s very impressive
Thank you for making this tutorial. I have always wanted to achieve this bit never knew how.
The video is very clear and simple, thank you! I will try this method
Thanks for showing it steps by steps
Great little tutorial. Sub’d.
i still have so much to learn.
What psi you use for your air brush? Do we need to adjust psi when doing shading layers?
Cool man
How is the thinner + paint ratio you use for the White color?
What ratio are you mixing the primers in step 1?
Great tutorial 👍👍
@customtips3207
3 жыл бұрын
Thank you :D
can you do this shading without a airbrush like a diffrent method
How many psi did you use on step 2 and 3?
Beautiful if using an airbrush
For the over spray of white does it have to be white? If I want a red color do I overspray with the red over the black and white or do I start with black to red to red with 20%more thinner?
@customtips3207
2 жыл бұрын
Good idea, I think first step after primer starts with dark red or brown, step 2 use white or pink and step 3 use red with 20% more thinner, it would be great.
Amazing !
God, i feel like such and idiot, wondering why I couldn't get better preshading effect.... I hadn't been further thinning my paint for final coat
great videos please make more tips.
@customtips3207
2 жыл бұрын
Thank you. If I'm free, I'll come back.
@mrniceguy0531
Ай бұрын
@@customtips3207what psi do you used?
Would you mind sharing what PSI you were spraying your Mr Hobby paints at? I keep getting thick layers that cover underlying details.
@emperorhadrian6011
Жыл бұрын
You have to use more thinner
When you shade do you take out the spray tip? Thanks
@customtips3207
2 жыл бұрын
Yes, but you can use another airbrush cap that makes you see the spray coming out of the airbrush.
Helo, Whats size the needle you use, 0.2 or 0.3? And whats the psi when painting the white colour after priming? Look so smooth when painting the white colour
@customtips3207
3 жыл бұрын
Use 0.5 all process but can use 0.2-0.4 I focus on trigger control, White after priming I use 12-15 psi and after that use 20 psi
Wouldn't you get a similar effect by making the base white color, then highlight the edges/grooves black, then the white overspray?
@dambrony1394
29 күн бұрын
I think its more control over shading if he started with gray Like the 'blur' source comes from the white, instead of the gray.
@glui2001
29 күн бұрын
@@dambrony1394 Interesting perspective.
Just a few question if i want to make others color (red with shading), how i have to do? (I'm planning to make sword impulse gundam custom).
@customtips3207
2 жыл бұрын
After primer start with dark red(or red+black 10%) or brown. Step 2 use bright red you can mix red and white for the desired shade. And step 3 with same color in step 2.
I wonder if this can be done with aerosol cans. I don't have an airbrush.
@ackmedzambosama5327
6 ай бұрын
Try post shading with powders
How long do you wait in-between coats? I'm so impatient
@lazyhydroponicsandstuff3682
2 жыл бұрын
You can use a hair dryer if your that impatient but I just wait a day
@customtips3207
2 жыл бұрын
yeah 1 days for sure.
How to get the 20% thinner computation?
@customtips3207
2 жыл бұрын
use feelings don't be serious But don't let it be too liquid.
Excellent tutorial. For small parts you need a very steady hand with the airbrush. What airbrush did you use and what’s the needle size? 0.3? Thanks
@customtips3207
2 жыл бұрын
in this clip is just no brand airbrush and it is 0.5 but focus on trigger control
@natalebabbo-gunplaanddioramas
2 жыл бұрын
@@customtips3207, thanks! I imagined that, but wanted to be sure. You sure show great trigger control in the video! 😊
@customtips3207
2 жыл бұрын
@@natalebabbo-gunplaanddioramas Thank you :D
This video isn’t helpful I put primer and mr color and it’s not coming out of my airbrush, before I put it in the air brush is it supposed to be wet or something? I’m a beggine
@fatherboots7714
26 күн бұрын
This video isn’t about how to use a spray gun, it’s specifically about how to do shading with a spray gun
My brush does not spray that smoothly 😅