Great stuff Frosty! I'm loving that MoFlow head! Thanks for showing the detail of the head. First look I've had at one other than what you see in the online pics. Great choices on parts IMO. That EC side cover was my choice too. You gotta love that bearing for the cam and the extra oil sump. I'm linking to this video more guys need to see this build!

@peterchristlieb

Жыл бұрын

Thank You very much! I’ll post some more on it once the valve cover shows up. Planning to do a 3” build and another 224 including the case grinding and all the fitting soon.

Nice head I saw your comment on Red Beard

Great video!!! I love all the reviews of each product. I am actually the manufacturer of the moflow and I can add that the valves have been moved around but retain stock spacing and rocker stand width so any misalignment is from the rockers. There has been a few improvements to the heads sense your version. Now with longer valves and more installed height. Which allows longer guides for better control. I do see some exhaust seat angle change in the near future. I appreciate your video! Keep up the good work!

@peterchristlieb

Жыл бұрын

Mark, I hope you didn’t think I was blaming the head, I’ll go back and edit if that’s what it sounds like.

@markkonschak6288

Жыл бұрын

@@peterchristlieb no I didn’t feel like you were blaming the head I was just trying to to clarify for you or other viewers that while everything is moved it’s still stock geometry for the rockers and valve spacing.

@aaron7520

Жыл бұрын

@@markkonschak6288 i need help modifying a billet head. Simple changes like offset guides and bigger seats. I know you can definitely help me as you designed this entire head and other things 🤣

@markkonschak6288

Жыл бұрын

@@aaron7520 hey Arron, I appreciate your confidence in me. Unfortunately I don’t have time to do 1 off parts. I’m focusing on improving and designing new parts. I am making some changes to accommodate larger valves in a moflow. Message me on Facebook or Instagram and we can talk some more.

Yes sir man this gots me anxious.... this is 5280 mini bikes

Yeah, love the content there Ice ! Been noticing for years how everyone is building a gx240 in a 200 block. Kool stuff,so what can I make out of my rebuilt Honda gx 240(242cm3)?? No hours on the build and runs good with my epoxy port,you know hollow out and backfill where necessary,,,,

@peterchristlieb

Жыл бұрын

I know some of the kart guys use the GX270. Is the 240 a small bore or short stroke or both?

@peterchristlieb

Жыл бұрын

I know some of the kart guys use the GX270. Is the 240 a small bore or short stroke or both?

What’s taking up all the end-thrust clearance? The cam or the crank ? I’ve had cams that were a bit long..... the side cover wouldn’t sit on the case. I check the clearance with just the crank installed and adjust the shims, then pull it out and check end play on the cam with just it installed. I had to take some material off the thrust side in the case for the cam once.

@peterchristlieb

Жыл бұрын

Honestly, I had close to zero end play with no washers on the crank. The cam fit with no issues but I’m about to pull that side cover and change a couple of things. I have a feeling the end clearance grew.

same thing here , use the factory bolts. EC carb bolts were to long.

You don't have that problem with the ARC side cover.

@peterchristlieb

Жыл бұрын

No you certainly do not.

Does that stroker kit fit a Tillotson 225?

@peterchristlieb

Жыл бұрын

I’m sure it does, with a 225, all you need to go 236 is the crank and rod

@blakestonebustosrb

Жыл бұрын

@@peterchristlieb do you think it will require any clearancing in the 225 tillotson ?

@peterchristlieb

Жыл бұрын

@@blakestonebustosrb If the 225 uses the race block, it should clear no problem. Depends on how big a cam you use also

@blakestonebustosrb

Жыл бұрын

@Frosty The Iceman 79 307 cam. Could I just replace the stock crankshaft with the 58mm wildcat crank or would it be smarter to just buy the EC 236 stroker kit?

@peterchristlieb

Жыл бұрын

@@blakestonebustosrb I’m pretty sure the rod length is different so you need the EC Rod. Should work great

Hopefully you've removed the comp release from the cam. It'll hit the crank counterweight and detonate eventually.

@peterchristlieb

Жыл бұрын

I saw a video yesterday about that, looked like it took out the whole lower end. Problem is I need a Starter…

@WyFoster

Жыл бұрын

@@peterchristlieb Either that or you have to grind the crank counter weight to clear it. I managed to make that work. Then polished the heck out of the rod side to try and balance it back again.

Set how much 7.5hp

@peterchristlieb

Жыл бұрын

Shooting for 25

@peterchristlieb

Жыл бұрын

Are you asking how much the head costs?

Video looks cool but can't get past his alarm going off in the background.

@peterchristlieb

6 ай бұрын

Sorry man, that’s the telephone.