My husband walked by right at the beginning of your video and said ″Oh! It's Pockets!″ That is how he was introduced to you, "purse pockets", so now you are known as Pockets in our home. 😂❤

@theartsypixie2771

3 ай бұрын

😂❤

@GennG

3 ай бұрын

I was sewing an apron pattern I'd made after looking at several that didn't quite work for what I wanted, but I accidentally cut out the wrong size patch pockets. My first thought was, "Oh, I'll just sew those 'wrong' smaller pockets onto the correct pockets" and that was because of Charlie or should I say Pockets! One cannot have too many pockets!

@eadra

3 ай бұрын

@@GennG she has inspired me to find ways to have pockets inside of pockets in so many things! I love that your apron is now "right", for *you*!

@lauraseale8520

3 ай бұрын

Yes, button hole foot for lots of buttons at once. I made a dress up wedding dress and decorated it with 50 shirt buttons.

@bandanarathore

3 ай бұрын

Ha ha. My husband knows her by the sound of tadaaa... 😂

I think the slow realization that the proper tools really do help is incredibly relatable. The wanting to just knuckle through the familiar hard way? Also relatable.

@tarhabrown8038

3 ай бұрын

Me. Totally meeeee I even have an antique sewing machine with beautiful feet (insert joke here) and haven’t…even…tried…. Lol

@hannahhaugen1694

3 ай бұрын

Both very relatable feelings, and ones I often run into while computer programming! I learned one way to do a thing, and it can be kinda hard to seek out a better way of doing the thing unless shown. I’m so glad that she is sharing her new-thing exploring for us to learn from too!

from a deaf person: thank you for all the descriptions of what the machine sounded like and how it affected you. :) VERY appreciated! And yes, I learned a lot - thank you for that too!! :)

@isabellal1434

3 ай бұрын

I second this! :))

@sammc324

3 ай бұрын

Charlie has such wonderful captions !

@lizvanwessem2055

3 ай бұрын

@@sammc324 she does!

The white 'zig zag' one is a teflon foot for PVC/leather/plether.

@jaybee4118

3 ай бұрын

Yeah, that cheap pack has some really badly named feet.

@yanijean

2 ай бұрын

The rollar

the button sewing one makes sense for accessibility reasons because like hand sewing just a few buttons for me can make my hand cramp up & be painful but just adjusting the button with the machine would help me so much

@beyondallmeasure

3 ай бұрын

I was going to say this. A few different feet mentioned here are helpful for my disabilities.

@vickymc9695

3 ай бұрын

It's for factories too. Almost nothing you buy will have hand sewn buttons

@StraylightWintermute

3 ай бұрын

@@vickymc9695 factories will have a whole separate machine per task, they don't use home sewing machines

@Stitchybecca482

3 ай бұрын

I used the button sewing one in lockdown when we were all making those face mask extenders- the bits of elastic with a button on each side so the hospital staff didn’t get sore ears. I made dozens of those things really quickly.

@lauragiletti

3 ай бұрын

I just like the button seeing foot. It looks cool when it goes snd I like the results. 🤓🤷‍♀️

“These two feet, wait, wrong platform” 🤣🤣🤣🤣🤣

The word "feed dog" comes from engineering nomenclature. A "dog" is any item that moves a part of a mechanism using "teeth" or those little pointy bits on the feed dogs. And to "feed" is to take in any thing like wood, paper, fabric, etc and move it along. So they're literally a mechanism with teeth that feed through fabric or feed dogs

@bevintx5440

3 ай бұрын

Interesting!

@leahh-g3358

2 ай бұрын

I learned about this due to needing to replace the agitator dogs on 2 separate washing machines.

"Is the machine threaded correctly?" is the "have you turned it off and on again?" for sewing machine issues. So many times I have not noticed that the machine has unthreaded itself when changing feet or bobbins or needles. So often!

@lauraseale8520

2 ай бұрын

Not forgetting.... When did you last change the needle?...

Okay, so the deal with the walking foot is that it's handy when you're working with multiple layers of fabric. That's why quilters love it- it makes sure your quilt top, batting and backing don't slide out of place. Regular sewists like you and me use it for particularly slippery fabrics, like satin or velvet, or especially for knits. (Stretch velvet or velour are basically the ultimate use case for a walking foot.) You'll note that the walking foot has its own set of feed dogs, and that's what makes it "walk" the fabric.

@kittybrowning

3 ай бұрын

I have a walking foot but I happened to watch a video that the person used this type of foot for slippery and multiple layers called a knit foot less hassle than a walking for as just clips on n off but works fab

@olivemd

3 ай бұрын

I like it for denim and other thick fabrics. Easier and neater results.

@kezronthedragon

3 ай бұрын

I have a walking foot/dual feed built into my machine. It's a little arm that comes down and hooks onto the foot, so it can be used with a variety of feet. I use it for almost everything, and it just gives such great results I'm never going back. Highly recommend that feature if anyone is shopping for a new machine.

@christen5647

3 ай бұрын

As someone who just made their wedding dress with multiple layers of satin and voile, the walking foot saved my entire butt multiple times during that project. Even with small basting stitches, a regular foot just wasn't enough.

@robinmeadows4758

3 ай бұрын

@@christen5647congratulations on your wedding and making your own dress 🎉

A lot of your "who uses this foot" is either for bridal/heirloom or quilting, and a lot of your issues with how a particular foot works is in your tension and how you hold your fabric. For example rolled hem feet work best when you hold the fabric at an angle to the right, and the overclock foot will actually fold under the edge and "over lock" it if the tension is corrected.

As your experience grows, your appreciation for those presser feet will grow. Ive been sewing for about 50 years and most of my presser feet were bought along the way as I talked to other sewist. I have primarily sewn clothes, including bras, but I've also quilted, made costumes, upholstered and decorated on my simple old machine. The feet take the place of computer model machines. Also, you will find that some feet can work on things you never thought they would work on. Every time you are sewing and having issues, refer back to your other feet. There may be a solutiin right there. (Actually, i have found it to be more than likely.) Its a lot of fun watching you learn and experiment. You use such good common sense! Keep up the great co tent!

@hannahthufvesson

2 ай бұрын

This is so inspiring! Do you have any top tips for unexpected uses of presser feet? ☺️

@rondawiebe1505

2 ай бұрын

@hannahthufvesson there's a foot for "faggotting" which is where you have your 2 pieces butted up against each other and then you use a fancy stitch to join them. That foot has a vertical piece right in the middle in line with the needle. If you put that foot on your seam, you get a perfect "stitch in the ditch".

@hannahthufvesson

2 ай бұрын

@@rondawiebe1505 Thank you! ☺️🙏

This video about comically niche feet was a comically niche resource for my exact situation where a few days ago I bought the 42 feet instead of just one specific foot, so this extremely helpful in a comically niche way

Are you a mind reader?!?! I literally thought the other day “it would be so helpful if someone told me which presser feet are actually helpful for garment construction!”

@AllTheHappySquirrels

2 ай бұрын

Same! I've looked at those cheap sewing presser feet sets and wondered whether any of them would be worthwhile. Now I have a better idea.

I'm lazy and seldom use pins, but even with pinning I found that when sewing 2 long panels together, like for drapes, they never met up properly at the end. That's where the walking foot came in for me! Since it keeps the top and bottom fabrics moving at the same speed, I no longer end up with an extra inch at the end on one of the pieces, and the entire length is smooth and not puckering. It's just a nicer finished look in the end.

Some of the feet in "who uses this" are more than just quilters - heirloom sewists who make elaborately decorated baby clothes, wedding gowns, and certain costumes use them for the (admittedly!) very specific type of tasks. :D I'm with you on the ruffler and walking feet - OMG, the NOISE is enough to make me wince because it sounds like I'm damaging my machine. :P Been sewing over 40 years and I STILL learn things, too! Keep it up, I love your explorations!!

@OzSteve9801

3 ай бұрын

I use my ruffler A LOT when I'm making soft furnishings and babywear. Once you get past the noise it's incredibly useful. I've had mine 40 years and it comes out several times a year for a good workout.

@isabelleblanchet3694

3 ай бұрын

The cutter overlock foot, (the one with blades that cut the fabric like a serger) also makes the same noise.

Loved Matt sneaking past in the background @15:31... cracked me up how he looked like a cartoon child sneaking out of the house

@KnitzyKitzy

2 ай бұрын

It was hilarious 😂

Justice for the roller foot! You used it for the opposite of its actual use! It's a must for sewing leather and pleather

@anitabellefeuille7362

2 ай бұрын

I was going to say this too!

@christinacordes6301

2 ай бұрын

If you can find a roller foot with a split in the middle of the roller, so there are two rollers, it will go around curves easier. Bernina's roller foot is made that way, but I don't know if it is available in a low shank version.

"The right tool for the job" is my mantra! It has saved me from wasting hours and dollars. Specialty tools rock

@apcolleen

3 ай бұрын

Crappy tools might do the job but they'll make your life more troublesome than they're worth. I don't even buy cheap mops anymore. My life already sucks enough I don't need a Dollar tree mop gouging my floors.

As my hands have had increasing dexterity issues, I’ve been relying more on the specialty stuff and they’ve saved my sanity. The cording foot is also awesome if you ever make your own piping!

I love the "oh no my machine is broken" - "Did you thread it right?" - "HOW DARE Y--Oh." cycle. I have two fairly basic sewing machines that almost never have issues. When they do, it's threading issues. Always the same issue, but never the same issue for each machine.

The zipper foot is really nice for invisible zippers, you can get really close to help it actually be invisible! I didn't even know there was a specific one for invisible zippers lol

@altijdjouwnaantje

3 ай бұрын

I'm in a sewing class and they have that special invisble zipper foot and it is SOOOOO worth it. Really really great for sewing perfect invisible zippers.

@sunshinesmiles5386

2 ай бұрын

Fully agree with the invisible zipper foot! I use both zipper feet and it's now so fast to put in a neat zipper!

@silvermeasuringspoons6462

2 ай бұрын

Industrial user here. The industrial zipper foot (very narrow) are far...far superior than the domestic one. No need for that specific invisible foot.

@charissa8252

2 ай бұрын

Oh Yes, the invisible zipper foot is totally worth it. I have yet to find one for my vintage machined just can't get the same level of finish with my std zipper foot. I can't imagine trying to do an invisible zipper with a universal foot.

I don’t even get my walking foot off my machine any more.

@SewingandCaring

3 ай бұрын

Same, I'm a pfaff collecter (at this point) and I have the cheapest singer HD with a singer walking foot on it which I use exclusivly for corduoy and velvets (I sew for 6-8 hours a day), and it's just flawless.

@mable552

3 ай бұрын

Same.

@franlevaillant6749

3 ай бұрын

Same, it’s not like it has an adverse effect sewing on fabrics that don’t specifically need it. I just leave mine on ❤

@shevaunhandley1543

3 ай бұрын

Love my walking foot and I also almost never take it off.

@michellestmarentette.antoi5904

3 ай бұрын

I left mine on too.

I love my cording foot for doing my gathering. I put tooth floss in the cording bit. The floss is strong enough for you to pull on and get the gathering you need.

@fortmacmom3122

2 ай бұрын

Smart

@sadurkee5

28 күн бұрын

You can do the same with a universal foot and a zigzag stitch as long as you’re careful not to sew through the dental floss

Gasp! Free feets! As far as I know plastic vs metal is about the friction on different fabrics. Sometimes one will work better than the other.

For the hemmer foot, you need to use the zigzag stitch... it will roll up the fabric and cover it.... mostly used for the dress rolled hem and in India it is used for the end of duppattas.... I hope it helps..

@MegaKellyschannel

3 ай бұрын

Omg really!?!? I LOVE the idea, and it's amazing when it works but by golly gosh persnickety is absolutely the word I'd use for it. I saw someone recommend ironing the hem in first to make it work, but then like... Why would I need the foot if I've done the work!? I'll have to try with a zig zag!

@kathylawrence2183

3 ай бұрын

@@MegaKellyschannelb

I swear I'm the only one who just adores my rolled hem feet. I probably use one on 80% of projects. Maybe there's a knack to it but I find it so much faster than any other hem option and pretty neat too. But somehow every time "sewing tools that didn't meet expectations" convos happen online it is near the top of the list.

@bunhelsingslegacy3549

3 ай бұрын

I have a handful of those for my 1914 Jones hand crank machine but need more practice with them.

@KlingonPrincess

3 ай бұрын

I have a set of these and just can't make it work. I'll have to continue to practice as I hand sew them constantly.

@DragonRiderShiru

3 ай бұрын

It's a high learning curve foot. When I was in school for fashion design we were told that we would love it or hate it

@Carlika

3 ай бұрын

I think it’s because they can’t make it work… It’s really hard to learn to use it, but once you are able to see its magic, it’s a turning point

@glittergoblin

3 ай бұрын

They are super persnickety, and I’ve definitely had to put a few projects in timeout with it! But as someone who puts curved hems on *everything*, mine has been a lifesaver on fabrics where I don’t want to bias bind the hem! Such a tidy finish!

For the overlock/overcast foot, the bar isn't for guiding the fabric...it is to help hold the thread out so it doesn't pull/scrunch in the fabric as you sew. Looking at your samples, it seems like you have a tension issue on your machine (maybe get it serviced if futzing with the settings doesn't fix it) and that is why you didn't notice a difference between the samples. That being said, I never use this foot because I much prefer using an actual serger lol

@armedvsokord

3 ай бұрын

I agree with your assessment of the feet difference and the tension. I got my feet with my machine so I see the difference between the 2 when I switch my feet. I do prefer the overcast rather than my serger. It uses so much less thread and adds less bulk in my seams, but I think that comes down to a personal preference.

@remusgrrrl

3 ай бұрын

I find if I adjust the tension on the overclock it will fold the edge of the fabric when it does the over stitch and give a nice clean edge.

@remusgrrrl

3 ай бұрын

Overlock

@kristendarnell5997

3 ай бұрын

Tension was definitely an issue, but I think the fabric she was testing with was a factor as well. I find it nearly impossible to use the overlock stitch on anything silky without the overlock foot, but it's only slightly better than the universal foot with quilting cotton or anything sturdier. Since I don't have a serger, an overlock foot is in my personal "Keep nearby" category.

@paularies3282

2 ай бұрын

On my machine it's also used for a blind hem stitch.

The roller foot is meant for use with pvc coated fabrics and pleather which tend to stick to regular presser feet.

The double welting foot is used in upholstery, but i have seen costubers use them for corded stays and petticoats.

@always2bfaithful

3 ай бұрын

It is also used to cover where gimp could also be used. It’s glued over staples and is just another option for a trim that’s flat and can be glued to the fabric. You will see it where fabric is stapled to wood.

@shevaunhandley1543

3 ай бұрын

I want one now for when I do cording on my stays and corsets 🤣

@loritravis2734

2 ай бұрын

That was definitely my first go to

As a sewer of about 60 years, I have found that I truly need the buttonhole, zipper and invisible zipper feet, and the walking foot is the one that lives on my machine. I too bought that 42 piece set of feet.

As a general rule of thumb: low shank machines are usually domestics and high shank machines are usually industrials. I’ve gotten really into collecting specialty feet for my industrial Singer, especially topstitch guide feet. It makes life so much easier and topstitching so much more beautiful! Thanks for another awesome video, I love watching you curiously explore every aspect about making things! ✨

@franlevaillant6749

3 ай бұрын

Thank you for commenting this. I was about to say the same, when I saw your comment.

The double piping foot: historical costumers making corsets with piping instead of boning. Hahahha

As a very shiny new sewist who approaches my fiance's mom's sewing machine (which is the only one I currently have access to) like it's a wild animal that I'm trying not to spook, it's so helpful to see videos where you're kind of learning too. Sometimes I'm intimidated by people who have been working with machines and all the attachments for ages lol.

Omg im commenting so much on this video... but! Alton Brown has a similar thought about kitchen gadgets, where he talks about the silliness of having a single-function tool instead of just using a kitchen knife properly. You're absolutely giving me those vibes with the 1/4", 1/4" with edge, 6mm lace, 3mm lace, etc feet.

@laurasmith2173

3 ай бұрын

So true. I was just thinking that multipurpose tools are always welcome where as specific use tools are nice but not necessary. Of course that changes if someone does intricate details with beads on every project or custom orders.

@AnniePetit

3 ай бұрын

The thing with the 1/4 inch and the 6 mm foot is also: 1/4 inch is roughly 6 mm, so it's the same, but just named differently so people can look up sizes for their used measure system easily.

Another reason for some of the more niche feet is that those of us with chronic hand pain or arthritis physically can’t hand sew anymore and those special feet give us back the ability to sew on buttons etc. It was fun to see all the possibilities available! Thanks :)

I'm sorry the ruffler foot didn't work out for you! I sewed 25 ballet tutus last year for my studio and the thought of hand gathering that much tulle that tight by hand is Not Fun. If you decide to play with it again it might need a little oiling. Also might be worth checking your tension? Thank you so much! Your channel is such a lovely place to be xx

@christinacordes6301

2 ай бұрын

I used mine for making a bedskirt for a double bed. It would have been a horrendously long edge to gather by hand, but I seldom use it. I'd put it in novelty grab

@mirjanbouma

Ай бұрын

I think that with the ruffle foot you kind of work "the other way around", if that makes sense? Like instead of cutting your to-be- ruffled-fabric to the right size and ruffle until it fits the part it goes on, with the foot you ruffle a strip of fabric until you have enough ruffle for the part you put it on. I hope this makes sense, it's very late here 😅

I have a hem roller foot that makes 6 mm hems with very minimal effort once you figure out how to use it. And since I make a ton of cloth napkins (gifts/selling) it saves an absolute mountain of time. It does take some practice, and I found that if you start by hand rolling, putting the presser down, doing like 6 stitches, then putting the needle down, lifting the foot and feeding it into the roller before putting it back down

@MegaKellyschannel

3 ай бұрын

My machine is so "smart" it gets angry at me if I try stitching without the needle down 🙄 sure, 99% of the time that's handy and I have just forgotten, but that 1%... Oooh the rage.

The overcast foot helps a lot when you don't have a serger and you want to finish the raw edge, especially when the fabric is soft. The pin holds the thread as it wraps the edge so it doesn't roll up the fabric. Just so you knoe😂!

2 mins in and I was like, she's going to keep a bunch of feet on hand. 🤣 Not even halfway and you're already have 6 feet on "nearby" list. :) way to go!🎉

I love my walking foot and I use it frequently. Also love my quarter inch seam allowance foot. I use all my feet. Edit: quilter here. I also make clothes.

So my fringe foot is called a tailors tack foot. Like when you need to sew in markings on fabric that wont let chalk stick.

Can confirm most of these are for incredibly specific tasks. The cording foot, button hole foot, and the button foot were always set up on 3 different machines in the factory, and never got swapped off. A lot this would only save you time as part of manufacturing.

about the bias binding foot: bias binding is also used a lot in bags, and in that you have a lot of straight lines to bind because the purpose of the bias binding is different from wearables (on wearables bias binding is the best for curves, meanwhile on bags it's because a lot of seams have the raw edge of the fabric on the outside of the bag and bags are made in thicker fabrics so things like french seams are non applicable)

The large opening foot works really well on doing lapped seams like on jeans. The braiding foot, when you have silken cord braiding trim, makes a big difference because it is so slippery.

@kathyjohnson2043

3 ай бұрын

Ooh, I didn't think about using it for jeans!

@cinthiawing8854

3 ай бұрын

I think the braiding foot would be amazing for sewing the narrow trim on military uniforms. I always had a hard time keeping the trim in a straight line.

@jenninstitches

3 ай бұрын

@@kathyjohnson2043 it was a happy accident that I figure out this little trick.

I used to think the overlocking foot wasn't helpful, but it actually has saved my butt with garments! The bar gives the thread some breathing room so that the edge doesn't get pulled in. It really helps, the more you use it.

It also depends on your machine, because for a Bernina you do not need to unscrew anything. the walking foot just clips on.

Someone probably already said this, but as a quilter, a 1/4” seam is THE seam. It is the only we use unless we’re doing something other than piecing. It is also essential to be very accurate with that 1/4” seam so that all of our blocks end up a uniform size, so having a foot that helps with precision is key. I now have my scant 1/4” seam set perfectly on my machine, but before I knew about the scant 1/4”, my 1/4” foot was basically the only presser foot I used other than the walking foot. So yes, who uses this? Quilters. All day, everyday. And the one with the guide is also super helpful, especially as a beginner. But I completely understand why it would seem frivolous as a garment sewist.

@annek.564

3 ай бұрын

Yes, and I use the dual feed 1/4 foot (#97) on my Bernina. Perfect combo. Also with the straight stitch plate.😊

"Do you ever feel like you've learned too much in too short a time?" Yes. Yes I do. Right now. I'm no novice, but I've learned SO MUCH from your video! And now I know I need to get some more feet for my machine.

15:30 he’s so sneaky! 😂

It’s TOO FUNNY, that you put the overcast foot in “what on earth” bc my partner specifically had me buy this for my machine so they could use it. It ended up being my second most used foot (other than universal of course 😂). I really like it to easily zip through finishing raw edges of garments or finishing edges before pre-washing my fabric. It’s a serger-like finish without investing in a serger. I know you rock those French seams though 🎉🎉 so it makes sense where they ended up in the tier list!

@adda312

3 ай бұрын

Yes that's also one of my favorites! Would go in the 'keep nearby' tier for me. I don't need a serger machine and I don't like the zigzags for finishing raw edges.

@isabelleblanchet3694

3 ай бұрын

I use mine to make top stitching really close to the edge after turning thing right side out.

@VickiKolman

2 ай бұрын

I used the overcast for the first time about 6 months ago and my thought was "oh my god, why haven't I used this before now?!" It was so nice for helping make a clean edge and not having so many raveling threads.

The walking foot works well for slippery fabrics as well. Which you don’t seem to use that much, so novelty grab seems good for you. It’s in my “duh” category 😊

Madam Sew has the best kit of presser feet, and I use a bunch of them. She also has some fun ones I want to get. The roller is good for things like vinyl or sticky fabrics. I love the open-toe foot for when I need to really see where I am stitching or thick fabrics. You really need to open your mind to all the kinds of fabrics. After many years of sewing I have found different feet make my sewing look better. I am not sure that is your goal.

The braiding foot we use with fishing line on a bias edge of something like chiffon or organza to make the gorgeous lettucey edge look.

Let me tell you. When I was making one of my first pattern quilts, a 1/4” foot with guide would have saved my sanity. You don’t realize how quickly 1/16” of difference will add up so that instead of having 12” finished squares you have some that are 12” and some that are 11.5”. Primarily I sew apparel, but every once in as awhile I decide to challenge my sanity and sew a quilt. If I need an exact seam allowance, I stack 2-3 pieces of painter’s tape so that I can butt the raw edges of the fabric against the tape.

Double piping sometimes shows up on historical garments

@shevaunhandley1543

3 ай бұрын

I'd be using it for cording corsets/stays... Looks very handy for that

The zipper foot is also very handy for the second pass of a French seam. It keeps the raw edge from the first pass out of the way just like it does with the zipper teeth. I use it all the time for them.

I have a hard time sewing on buttons, so a button sewing foot is actually really useful for me, even having to line up each one carefully.

The jaguar one looks great for sewing lingerie or swimwear

Your white ziczag foot could probably be a Teflon foot for leather. Just so you know in case you ever need one.

@josi_k.

3 ай бұрын

A Teflon foot works very well on faux leather and other slippery fabrics as well (not for shifting between layers, but for top stiches and such), it was an absolute game changer for my various waist bags (alternative to handbags)! Before I had it there was no way for me of getting a decent or even nice seam on some fabrics.

@misselanys1219

2 ай бұрын

Any foot that is white is a teflon foot which works well on plastics, vinyl. I use it when I am making clear plastic or clear vinyl pouches to store my notions. A diy hack would be to place low adhesive painters tape on the bottom of your universal foot (cut a clearing for the needle). The teflon feet are pricey.

I’m not even into the rankings and this is the most useful sewing video I have seen in a long time

The walking foot might be a hassle to put on, but I found it ESSENTIAL for pleather/vinyl, and also really thick fabrics like denim. I've accidentally wrecked a universal presser foot when I was trying to sew multiple layers of denim, the presser foot was going "uphill" and the needle hit the foot

@ericakusske3321

2 ай бұрын

I have a flannel and denim rag edge blanket on the project list and I think you just saved my sanity. Thanks!

I have been sewing for 25 years and I only used the universal foot and the zipper foot for the first 10. But over the last 15 years, I have gotten adventurous and started to realize that sometimes the extra two minutes it takes to change the foot makes your product looks so much nicer and can cut down the frustration. I had the same experience as you with the invisible zipper foot. And I never did another traditional zipper unless I was forced to. The foot that guides trims and beads right down the center is great for zigzagging over a piece of string to gather a long, thick piece of fabric. The free motion foot intended for top quilting is really great for appliquéing lace, or any other kind of embellishment. I love how I got to see some of the feet in action that I could never find a reason to use! Such a fun video! Thank you so much for sharing!

@infectiousangel

2 ай бұрын

The free motion foot is also good for darning, and is actually also called a darning foot :)

I suddenly feel the strangest urge to buy a jumbo pack of feet and then see how many of them I can work into my next few projects.

I used to teach the basic sewing class at my local JoAnn's, and the way i taught it was a crash course on machine workings, a small project, gloss over pattern info (a lot of the time we ran over). I always encouraged people to bring in their own machines to class so i could walk around and point out the parts to everyone. It was always fun to see what machines people brought, how parts differed, and how things are the same. 3 basic feet your machine needs to have: the universal (duh), the zipper foot, and the buttonhole foot. The buttonhole foot varies by model because machines stitch buttonholes differently. The rest you get when they will solve a problem lol.

I loved that Matt tried to sneak by the door close to the beginning of the video and the puppy went running after him lol.

The walking foot is awesome for swing things that are thick, stretchy, or prone to distort. So it's great for quilting (whether you're making a blanket or a jacket), sewing knits with a zigzag, and fabric with a nap. For me it's something that I keep nearby when I'm sewing because so often problems are solved by using it.

The walking foot saved my sanity on several projects.

Walking Foot. I do not Quilt, I lean towards garments, draperies and upholstery but... Not just for slippery fabrics and knits. It is also helps to keep striped fabric even. If you, like me, are a bit on the OCD side, seeing your striped garment unevenly matched from one panel to the other would most likely send you into a frenzy, much like crooked picture frames on a wall, the walking foot is a must have. But like anything new, it's something to get used to. Practice makes perfect Ruffling Foot- Again practice makes perfect, you have to adjust your tensions, I would much rather use the ruffler to sitting there pulling on a thread in the hopes it wont break while I try to make a ruffle, also being able to ruffle onto the bodice or a band at once saves lots of time. Shirring Foot- Adjust top tension, stitch length and bobbin tension to get the desired effect. Again practice makes perfect. As you seem to have a hard time dealing with simply changing your presser feel out, most of these may not be for you (No Shade). However, for those who do certain kinds of sewing (quilters, upholsterers and so on) and who appreciate taking time with the process and more importantly the end results, many, not all of these presser feet are a must have. thanks for the presentation. Peace P.S. Been sewing on and off for about 50 years, taught on a singer treadle by my grandmother. 😊

A satin stitch is closer together than you used, and my universal foot ABSOLUTELY jams. I pull out my satin foot or open toe foot for it because otherwise I start yelling at my machine.

I loved the "loud" ruffler foot, when making tons of costumes with ruffled layers of tulle. I cut long stripes (as long as the length of my fabric actually using a box knife), then sew them on, cut at the end and start the next layer. It safed me so much time and pain.

I love Mat's little cameo peeeeeering around the door and then dashing past 😂

"This is my screwing face" *squint* I did NOT need to laugh that loud in the middle of the office, thank you ma'am

Thank you for these explorations, Charlie! It helps those of us who are intimidated by the potential expense of sewing, as a hobby.

Send back the cheap kit of nonsense and keep the three extra pieces you bought The "walking foot" attachment is more properly called an even feed foot, and can actually be helpful with napped, thick, and slick fabrics. The shirring foot keeps you from having to use shirring elastic to get the same effect, if you don't need an elasticated finish. It's essentially a soft ruffling foot. And yes, you have to practice or allow for random lengths to adapt to your project. A roller foot is best for fabrics that are sticky--like vinyl or leather. The bias binder works best on flat-ish fabric, so bind the armhole before you sew the side seams. the blind hemmer is great--I can't do much hand sewing with my arthritic hands any more. You need to tighten your bobbin thread to get a more pronounced "tuck." My favorite attachment, which faded out by the 1960s, is the tuck marker. It sews down tucks or narrow pleats while marking the fold for the next tuck at the same time. Rolled hemmers take lots of practice.

You will love the sew a button by machine when your much older and can’t see the eye of the needle 🪡 when sewing a zipper on use double sided tape and the zipper foot. Walking foot is the best thing ever invented.

the overcast foot makes more sense if you try a zigzag on softer fabric. it stops the zigzag from bunching up the edge of the fabric. it's intended to be a sort of replacement for a serger, keeping raw edges from unravelling. the rolled hem foot works, BUT there's a large learning curve to it. and the 1/4" seam guide one I use for doll clothes because there's no guide on the machine for the really small 1/4" seam allowance.

I liked using the walking foot attachment on my old machine. Yes, not crazy about the noise. I left it mounted to the sewing machine as it's great to use for all fabrics not just knits or quilting. So when I was ready for a new sewing machine I got one with a BUILT-IN walking foot. I use my open-toe foot for all my ordinary sewing.

I didn't know I needed an hour long video about presser feet, but I had fun and my knitting and crochet projects were advanced, yay!:D

I used a ruffler at age 13. Mom and I made a bedspread and ruffled curtains, in 1968. As i recall, it was complicated. Love the jaguar.

Getting a rolled hem started with a rolled hem foot is an absolute PITA. My solution for this is to hand stitch a length of thread at the beginning of the fabric, making it long enough so I can wrap it around my fingers. I use this as a sort of pull handle, to help me pull the fabric straight through the roll. It takes a little practice but it really works.

13:42 the walking foot is designed for bulky things like quilting, OR stretchy things like knits where the layers don’t want to stay together.

The first kit had a walking foot, which was why it was expensive. Mostly used by quilters, but also very handy for knits, which you sew a lot! When one layer of your knit fabric seems to grow longer when sewing, a walking foot will help solve that problem. Most Singers, Brothers, Pfaffs, from antique to modern, use low shank feet. However, the slantomatic Singers from the mid 50s - 60s use only slant shank feet. Some older Kenmores use a high shank foot. The ruffler is very handy and I use that a good bit, but testing of the settings is necessary. The shirring/gathering foot is a lot the same, but the ruffler is more versatile. Your machine probably has a feed dog drop mechanism (necessary for free motion quilting), you just need to find it. Roller feet are for leather, vinyl/pleather.

@Downhomeherbwife

3 ай бұрын

I have 2 vintage Singers, both slant machines. There is a screw on leg (3D printed) you can use to be able to use low shank snap on feet. It's worthwhile.

"I don't know that a regular presser foot would get stuck doing this." *Mine does. Often.*

The 3 you bought separately ARE the most expensive. Fancy that they weren't in the cheap set😂

As a lifelong sewer, I thank you so much for making this video. I really enjoyed seeing all of the purposes of the feet. This sewer is going to go grab one of those 42 pcs. kit! Thank you!

As someone who loves the 18th century and historybounding…. You can pry my ruffler out of my cold, dead hands. It took some effort to figure out the right settings to look like proper historical pleats but I may have started crying when it worked and a petticoat basically made itself.

Walking foot is a must for multiple fabric layers-like straight line quilt-it add an extra set of feed dogs to help fabric go through evenly

Best video I’ve seen on using my machine’s feet. Like your style of presentation.

This is so weird, I just bought this exact kit of presser feet for myself and my mom the other day! I'm excited to see them all in action!!!

I use the piping foot to sew fishing line into hems to get the curly, lettuce-y hems on super lightweight fabric or to add some structure to more heavy fabric hems. Totally agree on the ruffler though, I got one and then was like, wait...the amount of math gymnastics I would have to do to be precise enough for patterns is TOO MUCH.

The plastic feet are particularly good for materials that are a little grabby. Leather or vinyl particularly. I also like it for foiled or coated fabrics.

I just use a piece of painters tape on my machine to show where my seam allowance should be. That way I can line up my fabric with it and just zip through.

@susanrussell8195

3 ай бұрын

Me too!

@misselanys1219

2 ай бұрын

Painters tape is a godsend! Try using it on the bottom of your universal, cutting out a clearing for the needle, and voila! Now you have a diy "teflon" foot. Save money and works like a charm!

My favorite foot used to be my walking foot. I left it on my machine full time because my stitch came out so much neater. Then I bought a machine that had the even feed built in (all Pfaff brand machines have this) and it changed my life. My new favorite is the edge joining/stitch in the ditch foot. I use it most for topstitching and understitching. Also the straight stitch foot works even better if your machine has a straight stitch plate too.

I love how you REALLY dive in with your explorations. ❤. It was lots of fun watching you try out all of the different feet. Your “keep it nearby” list was nearly identical to mine. I do use some of the “who uses this” options … but usually only when I have a whole lot of a specific task (like ruffling 20 yards of fabric😂). Changing out the foot, getting the tension and other settings fine tuned etc… it just isn’t worth the effort for smaller projects.

@cynthiadugan858

3 ай бұрын

I actually use my straight stitch foot the most and my zipper foot comes in second. The first few years of my sewing life I hardly ever changed from the universal foot but now I only use it when I need a zigzag. 😂

As a quilter my go to feet are 1/4 seam foot, universal, Walking, free motion. And when I branch out zipper, button hole.. 100% sure I have more than I even recognize in my stash though. Also, I have 2 free motion feet and they each work better one machine than the other… yes, I have more than 1 sewing machine….

My favorite row is your ‘who uses this?’ row! For making cultural ribbon skirts. Thanks!

Honestly this is such a great exercise I should probably go through my manual and try out anything in there I haven’t done before

When shirring with the elastic thread you have to hit the fabric with some steam after you sew it and it will shrink up (it’s rather fun to watch, like magic! 😅) Excellent and fun video as usual! I learned about quite a few sewing feet I’ve never heard of.

The foot with the blade in the center that you did stitch in the ditch with can also be used to make nice topstitching with the blade near the edge of what you are topstitching.

That 1st one is an adjustable blind hem foot. Handy for invisible hems.