TIANXUN TX850 Metal detector volume control modification
Ғылым және технология
As promised a video explaining how to add a volume potentiometer to the TIANXUN TX850 Metal detector.
⚠️ ⚠️ WARNING ⚠️ ⚠️ THIS MODIFICATION WILL VOID YOUR WARRANTY!!!!
Like,subscribe,comment,share 🙂
Peace out ✌ from HappyBees 🙂
Stay happy live long and prosper 🖖
Help HappyBees grow!!!
donations of crypto accepted
0xa3cE6a50eaBC3e08A9e6696d126c679A7b6E2e84
Shiba inu
TigerKing coin
Пікірлер: 51
I hope your efforts will be successful!😊😁👍👍👍
@HappyBees
2 жыл бұрын
Thank you 👍👍
Hadir pertma kali menyimak sahabt totorial nya sangat bermanpaat
@HappyBees
2 жыл бұрын
Sorry I only speak English
Legal! Hi from brasil.
Great little upgrade. I have a couple of these clones and they are soo good, not to mention cheap. What are the resistance values of those potentiometers?
@HappyBees
3 жыл бұрын
I'd need to check which one I used, it seems to work well with no problems.
@metaldetectormilano6301
3 жыл бұрын
@@HappyBees 1k-2k-5k you must use low restistent
Reason for overloading the ATX 880 device
This might be a stupid question but could I just get some headphones with an adjustable volume toggle instead? Or is your way here the only way to adjust volume? Thanks
@HappyBees
5 ай бұрын
Yes, I think that is the simple answer. Only you would have a wire connection to the detector and person, which can be a pain sometimes.
@jamesindaous
5 ай бұрын
Cheers. I’ll be hunting with someone else so headphones will be the way to go for me. I don’t want to risk modifications so It’s headphones and hope I don’t go deaf :D. Thanks for the help
I have the same metal detector model as you. Your tx850 work well? Also with high Gain
@HappyBees
3 жыл бұрын
Hi thanks for the comment, yes its s pretty good detector, iv found few good things including a bit of gold and old hammerd coin 👍. How are you getting on with you tx850?
@riccardomarinoni6733
3 жыл бұрын
@@HappyBees soso, too false signal and chattering, the hunting is near impossible. what coil connector do you have? with black screw or the metal screw?
@HappyBees
3 жыл бұрын
Mine has the metal screw, iv not found it too jumpy along as I ground balance it manually
@HappyBees
3 жыл бұрын
Oh you mean coild to the stem? I'd so then mines black plastic
@riccardomarinoni6733
3 жыл бұрын
@@HappyBees also i did ground balance but nothink you can see my problem here kzread.info/dash/bejne/hWSHtreJk9e0eLA.html
Có dây xanh, đỏ, đen, vàng, trắng em không biết nó tương ứng vói số thứ tự 1, ,2, 3, 4, 5 ?
Can you help me how to solve the problem of noise and disturbance in this device?
@HappyBees
7 ай бұрын
What kind of disturbance are you getting? Is it while you detecting?
Sir can you tell me if there is a calibration on the Tx -850 to adjust the setting for what the detector reads. I have a TX-850P and it's reading a quarter at a 78 Instead of 85-87 like it should . Can you find it for me and let me know where it's at.
@HappyBees
10 ай бұрын
Hi there yes there is a way to adjust the sensitivity once you open up the detector to be able to tune it up
@teddymartin6256
10 ай бұрын
@@HappyBees well we got it calibrated by accidentally cut the electronic strap getting into the box ..so I lost my discrimination so my buddy ordered in a new strap and will install it Monday or Tuesday so then it will be back to normal God willin
Does this mod still work two years later? I was wondering if grounding the third pot lug is really needed.
@HappyBees
2 жыл бұрын
I dont think it's needed iv had no problems
@bleirdo_dude
2 жыл бұрын
@@HappyBees Cool. I'm going to do this to a Bounty Hunter Tracker IV, and two Tesoros. Wish me luck.
@HappyBees
2 жыл бұрын
Good luck sure it will be fine.👍
@bleirdo_dude
2 жыл бұрын
@@HappyBees Thanks. 😁🖖
What size ohm potenti is my brother using? greetings from Indonesian hunters 👍👍👍
@HappyBees
2 жыл бұрын
Hello there im not sure if I used 1k ohm or 10k ohm it's been a long time since I did the modification. I am doing a video soon about adjustment of the sensitivity and vdi numbers, I can check when I open it and see.
@albe200262
Жыл бұрын
@@HappyBees To inform all readers To adjust the volume of any device it is necessary to use logarithmic potentiometers not the linear type, this is because our ears is not linear in terms of sensitivity and using a linear potentiometer it would then be difficult to adjust the volume to the desired level. Linear potentiometers can be recognized because they have an A after the value eg. 10Kohm A while the logarithmic ones have a B eg. 10 Kohm B. Type B is used for volume adjustment on radios, amplifiers, etc ... Type A for all other uses.
E cũng có TX850, e vô tình làm tuột đầu dây kết nối giữa máy và đĩa, trong đó có 5 dây, giờ e không biết kết nối trở lại, e nhờ a hướng dẫn giúp em sửa nó trở lại như ban đầu
@HappyBees
Жыл бұрын
You only need to interrupte the wire from the speaker to the headphone socket the red wire, cut it then add the volume nob in-between
quindi e' giusto 10K oppure 20K?
@HappyBees
Жыл бұрын
I used 10k but was advised after to use lower like 5k or 2k. It still works fine with the 10k though.
you must use a Linear potentiometer, not Logaritmic.
@HappyBees
3 жыл бұрын
Ah really? I will look see, do you have a link to one I need? The one I use seems to work, whats the difference please?
@metaldetectormilano6301
3 жыл бұрын
HappyBees 2020 you must study the differences on google and read an article with translation on my internet site: www.metaldetectormilano.com
@MrJkosta
3 жыл бұрын
What resistance value potentiometer?
@HappyBees
3 жыл бұрын
I'd have to check which one I use, but it seems to work no problem.
@jaywolf2519
2 жыл бұрын
Both your video and site say to use a logarithmic A1K 1K ohm potentiometer. Here you say the opposite. Which is it? Logarithmic or Linear???
Very poor explaining!
@HappyBees
2 жыл бұрын
was just showing what I did, I'm not very good at explaining things or very confident on cameras, sometimes feel like a wally talking to a camera 🤔
@elinustoy5921
2 жыл бұрын
Help me to understand which wire is to cut😁 and the proper controller to use. Thanks
@HappyBees
2 жыл бұрын
Find the wire from the headphone plug that go's to the speaker and cut that, wire it to the pentiomitor bottom pin, then to the top pin you put the wire that comes from the speaker 🔊 👍
@yousof_2023
7 ай бұрын
Is this caused by overloading the ATX 880 device?