Graphite powder is how you line anything that shouldn't have dirt stick
@mistervaso4 ай бұрын
I am wondering if this is causing me to have idle issues it being factory spring after all my mods
@V8sareslow1
4 ай бұрын
Need to see where your vacuum is, and then look at the chart and see which spring you should have. Can easily Google that information as well.
@pistolmike7919 ай бұрын
I think you went a little too low on spring weight man. Have you been building boost after this new spting?
@V8sareslow1
9 ай бұрын
Yes I have. And this has nothing to do with building boost pressure. I also have every spring in my wastegates as well for the minimum boost I can run. Zero issues building boost.
@pistolmike791
9 ай бұрын
@@V8sareslow1 its a blow of valve right? So if its open at idle I thought that would prevent the turbo from building boost. I'm genuinely curious, I'm trying to fully understand the turbo world and boost and bov
@V8sareslow1
9 ай бұрын
@@pistolmike791 open "at idle". The vacuum is what's opening it. Under boost, the air pressure goes through the vacuum line, on top of the bov, and forces it closed.
@pistolmike791
9 ай бұрын
@@V8sareslow1 okay. I thought if it was open at idle it was just gonna bleed boost. Thank you
@christianrawlins3903 Жыл бұрын
There is no point to this video. He is jus rambling on not making sense.
@V8sareslow1
Жыл бұрын
What exactly doesn't make sense??? I'm can't get more basic than I'm getting. 🙄
@qx4n9e1xp
11 ай бұрын
Maybe you're just too dumb to work on cars. Have a professional install your BOV for you.
@stricken46133 ай бұрын
hey man you gotta instagram?
@V8sareslow1
3 ай бұрын
I do, but I never use it.
@stricken4613
3 ай бұрын
@@V8sareslow1 i have really bad compressor surge. and im not sure if my spring is the reason
@V8sareslow1
3 ай бұрын
@@stricken4613 more than likely, no. May need a biss adjustment, have a boost leak somewhere, bad IAC, or might just need a tune.
Пікірлер: 25
It's a good sign when you're moving onto BOV issues...IT'S ALIVE
Man I’ve been wondering why mine wasn’t opening at lower RPM. Thanks Scott!
Thanks! No sound from my BO valve on a turbo LS setup, I need a weaker spring and now I know how it’s supposed to work
I laughed too hard when you said “unless you’re a total freaking idiot” 🤣 I’m ready to see this monster go down the track!!
Obrigado por sua explicação; excellent. Thanks!! São Paulo- Brasil.
Awesome
Great video but I didn’t see or missed it, where did you order the springs and the spring chart.
@V8sareslow1
Жыл бұрын
www.extremepsi.com/store/TiAL-BV50-and-Q-QR-Blow-Off-Valve-Springs.html Everything is on this page.
Do you know where you bought the o ring that goes in between the welded flange and the bov? Brand or part number/ size? Thanks
@V8sareslow1
11 ай бұрын
www.extremepsi.com/store/product.php?productid=17673&cat=2416&page=1
Graphite powder is how you line anything that shouldn't have dirt stick
I am wondering if this is causing me to have idle issues it being factory spring after all my mods
@V8sareslow1
4 ай бұрын
Need to see where your vacuum is, and then look at the chart and see which spring you should have. Can easily Google that information as well.
I think you went a little too low on spring weight man. Have you been building boost after this new spting?
@V8sareslow1
9 ай бұрын
Yes I have. And this has nothing to do with building boost pressure. I also have every spring in my wastegates as well for the minimum boost I can run. Zero issues building boost.
@pistolmike791
9 ай бұрын
@@V8sareslow1 its a blow of valve right? So if its open at idle I thought that would prevent the turbo from building boost. I'm genuinely curious, I'm trying to fully understand the turbo world and boost and bov
@V8sareslow1
9 ай бұрын
@@pistolmike791 open "at idle". The vacuum is what's opening it. Under boost, the air pressure goes through the vacuum line, on top of the bov, and forces it closed.
@pistolmike791
9 ай бұрын
@@V8sareslow1 okay. I thought if it was open at idle it was just gonna bleed boost. Thank you
There is no point to this video. He is jus rambling on not making sense.
@V8sareslow1
Жыл бұрын
What exactly doesn't make sense??? I'm can't get more basic than I'm getting. 🙄
@qx4n9e1xp
11 ай бұрын
Maybe you're just too dumb to work on cars. Have a professional install your BOV for you.
hey man you gotta instagram?
@V8sareslow1
3 ай бұрын
I do, but I never use it.
@stricken4613
3 ай бұрын
@@V8sareslow1 i have really bad compressor surge. and im not sure if my spring is the reason
@V8sareslow1
3 ай бұрын
@@stricken4613 more than likely, no. May need a biss adjustment, have a boost leak somewhere, bad IAC, or might just need a tune.