Thank you for watching! If you have any questions, just leave them here and I'll get to them! (Also leave a like and follow, I'd love that!)

@jasondomingo1502

5 жыл бұрын

Hegamurl using Logo7 To programe a PLC to sort conveyor.How do I programe it to sort colours into specific points jdomingo67@yahoo.com

Great info! Thanks again! I recently got access to TIA at work and I've always wanted to learn to get a better understanding. You explain this really well and I've been following right along. Thanks again! :)

great information. simple explanation and direct to the point. I am begginer TIA Portal. Thank you

I'm new to Tia portal and I struggled to find a credible and trusty source of information. but you are fucking genius and thank you for the videos, hope to get more satisfied with your upcoming videos

You are explaining things very simple and very good. Thank you!

very smart programming. liked the set/reset function. very efficient.

Very easy to follow. Thanks a lot for such quality work.

very nice video, I have followed it well until the end and I have also been able to do what you are doing. good job

Thanks Hegamurl great tutoria SR: Set/reset flip-flop Use the instruction "Set/reset flip-flop" to set or reset the bit of the specified operand, depending on the signal state of the inputs S and R1. If the signal state is "1" at input S and "0" at input R1, the specified operand is set to "1". If the signal state is "0" at input S and "1" at input R1, the specified operand will be reset to "0". Input R1 takes priority over input S. When the signal state is "1" on both inputs S and R1, the signal state of the specified operand is reset to "0".

I managed to create my first ladder logic with your guide 😃

Thank you master! Very nice playlist!

MAN really appreicate your tutorial.

This is great. Very precise.

Your videos are gold!

Hi, thank you for great tutorial. I have a question for stopper and B2 sensor. Shouldn't we define also some pneumatic valve (for example) to open stopper, also some second valve to close stopper. I don't understand how this would work in real situation, what will activate movement of the stopper, I suppose B2 is only signal which activate some motor or valves? Thanks!

Great Stuff Sir !!

Man, you're the best!!

Hello, Hega. Thanks for always rolling out series of tutorials-they've been really helpful. Please, I have a challenge that I need your help on. I'm working on a siemens KTP600 Basic color DP HMI with TIA Portal V17, and I'm having difficulty in displaying Alarm Messages on the screen using "bits" from the S7 programs. Please how do I make this possible? Thanks.

Great video! I have question about automatic assigment IP addresses by TIA portal. I work in big company so we have a lot of used IP addreses and I am wondering when TIA portal automatically assign IP addres does TIA take care about occupancy of assignet IP addres or it can add some addres which is used by other device so make some trouble in communication? Thank you very much.

If B3 is open contact and if closed I am little confused about it if reset is active the again start the belt ... Can you please help me out about this logic.

Great Video BRO!

phillip paus?i hope this is you.ive been waiting for you for so long.. thank you for the wonderful lessons.

@hegamurl7434

5 жыл бұрын

Hello Alpha Zero! Yes, that's me^^ Setting this new channel up more as a hobby, but I'm happy that I can help you with this and my older content!

Great tuto for beginners, ty dude

@hegamurl7434

3 жыл бұрын

Thanks pal!

Thank you for your videos

Hi, How to Bool to analog value conversation.. Any possible in Siemens plc.,????????

Superb sir

hello guys in TIA PORTAL . I have a motor controlled in DOL with a BREAKER. When the breaker trips i want the motor to show red and blink,when i reset and run motor i want my run signal from contactor to turn motor grEen. how do i combine run FROM CONTACTOR and trip commands FROM BREAKER to Show on HMI. 'NEED HELP

What's the sofware they use ?

Thank you Sir so much for your valuable effort, I've a question, please Why the PLC program is devided into networks ?

Danke für deine Videos!:)

@hegamurl7434

4 жыл бұрын

Kein Problem!

thnaks bro but i have question why u didn't make a coil at the end of network one is it normal to just type K1 on the top an it's done i aspire to be a professionel but im beginner now hhh thanks again dude

Hi Mr.Hegamurl, after download that i had problem for run Wincc simulation. it has a solution , remake a PC Station and Set all Tag again....it will be OK... :)

Dear man. I think after part go over and B2 loose input, the 1M1 should be reset back to the original position.

Thank you! 😀

Hy sir pls make a video for TIA portal that how to find step by step that which sensor feedback is not coming to run a machine. While too run the machine all sensor feedback came step by step if one of it is missing so machine not run . Pls make a video related to it

so far so good, approaching 2 k.

@hegamurl7434

4 жыл бұрын

Yep, almost at 2k.😁 thanks for the support

Danke sehr.

just subbed

SR block is the same as putting an assignment (like your network 2) with 2 parallel branch to make an auto maintaining button right? Once activated, the assignment activate the parallel contact and bypass the start button which can be released

@hegamurl7434

4 жыл бұрын

Pretty much, yeah (just different in how to create it... what they do is the same). The official term for the circuit you are describing is "seal-in circuit"

@RobNO

4 жыл бұрын

@@hegamurl7434 Okay, so what's the purpose tu use the flip flop block? Only faster coding or there is something more? I read in Siemens manual that I should minimize as much as possible the use of these blocks (I just should have bought a 1500 and not a 1200. I miss GRAPH language)

Good afternoon. Thank you for your work, it is very necessary and cool. I don't know English very well, so I use subtitle translator in KZread, but I think some of your videos in KZread are not of high quality because of your channel settings - translator thinks that you speak German and translate very badly. Could you put USA location in the video settings. Thanks in advance)

🙏🙏🙏

Hi Thanks for these useful tutorial. I just want to tell something about SR and RS blocks you have mentioned at 4:10 . In these blocks always the second letter is dominant. For ex. if in an SR, both pins receive 1, then R is dominant and the output would be reset and vise-versa for RS. Regards

@mhkassab-1

2 жыл бұрын

Thanks for the info ..

Thanks a lot

@hegamurl7434

4 жыл бұрын

You are very welcome!

Hello sir I need freelance electrical provider company for garmany location how to search

Prima!

I just don't understand why b3 is not like b1 & b2, meaning b3 sends 1 when the component in front of b3 other than that send 0. anyone could help ?

@hegamurl7434

2 жыл бұрын

B3 uses a normally closed contact in the phyiscal hardware in this case (meaning the sensor itself is the "inverted" behaviour)... a lot of times sensors are used in a NC way rather than NO... it highly depends on hardware

@elaasriyoussef1665

2 жыл бұрын

@@hegamurl7434 Thnak You so much

Mach weiter Bruder !

@autoloide134

3 ай бұрын

Habs direkt gewusst, dass es ein Deutscher sein muss :D

antappppp

Just a request.. If you can begin teaching more sophisticated programs..

You are very nice brother 🤍💯

Scalling

kzread.info/dash/bejne/pGibyq9wZ9OdccY.html