Really cool to see what the robot can do! May have to pick those up. All for more robot content

expreso police comin for u bro. We pray fo dis homie! 🙏

@BrianQuan

2 жыл бұрын

grind finer bro

Robot content highly appreciated 😍🙏🏻

Just got mine today and it works great. I only had medium roast on hand and I did notice a bit more crema when preheating the piston with the thundie. Looking to trying some light roast soon with it.

Breville dual boiler backflush discs also work well too. Made a quick video around it!

I'd really love different basket options over the Thundie. Hoping someone makes that next

To preheat the piston, I connect the portafilter spout to the portafilter, and then lay down a pre-cut silicone mat inside the portafilter to keep water from flowing out. I then pour in boiling hot water and attach the portafilter to the robot. This keeps the piston hot as well as the portafilter and when I need to pull a shot after prepping the basket with grounds, I just pour the water out and pull a shot (with or without the spout? ). Honestly, I think this is a much better option, because you just need that tiny piece of silicon mat.

@loniousmonk

Жыл бұрын

Interesting. If you want to pull without the spout though isn’t it a bit finnicky to remove it because it’s also hot by that point? I guess the robot doesn’t ship with the pressurized basket anymore but that would actually be quite a good use for it. That is, plug the hole on the pressurized basket somehow like you have done with your silicon mat, put it in the portafilter (without spout), fill with hot water, and put into the robot. Then when ready you can take out the PF, dump the pressurized basket and the water out together into the sink or whatever, and drop in the normal basket and proceed. Problem is the pressurized basket is like 45 € and that feels like too much if you’re just going to use it as a preheating tool. Would only be worthwhile if you didn’t have to buy it separately and just had it laying around anyways.

@nicid54

Жыл бұрын

@@loniousmonk Yes, exactly! Mine came with the pressurized basket, so it was just lying around. I didn't realize that they stopped shipping them together -- I definitely wouldn't buy it just for that purpose

Message churls (dot) coffee on Instagram to order! 🤖

I wish the temperature graph you shared had an entry for just portafilter plus basket because I think that is the easiest way to make a super stable temperature for the robot. I just let it hang from the rim of my kettle while it's heating up

Such a good idea to steam-preheat.

Ended up getting thundies because of this video! Curious to know if you have a go-to light espresso recipe for the robot.

Hey Brian love the videos I do have an off topic question, I’m very interested in getting a new grinder and I know you seem to be the only KZreadr who’s basically used the lagom p100 and the Webber EG1 I’m just not sure witch you would recommend for mainly espresso I do value your opinion.

Awesome! What size paper filter are you using for the bottom? The ones that came with the Robot?

Is there a reason you use boiling water to heat the piston but use steam to heat the portafilter?

Where can I get beautiful ceramic cups like that?

Is this still available somewhere?

Looks cool! How about a preheat shot for my wife, then I get a second temp stable coffee 😂

Filter 2.0 Is kind of like turning the Robot into an Aeropress.

Great gadget. But wouldn’t it be better to preheat both the piston and the basket by simply felling the basket with water and attach it to the piston while you prep your coffee? You can have a mod to seal the bottom end so it doesn’t drain, like seal the spout and attach it.

how does the filter 2.0 differ from an aeropress? with that kind of pressure and "immersion" time its seems very similar to an aeropress recipe

@BrianQuan

2 жыл бұрын

The biggest difference here is the grind size! You are grinding slightly coarser than turbo shot espresso which would be way too fine for any normal AP attachment. Luckily Churls also made an attachment that allows you to use a 51mm basket with the AP and you can pull filter 2.0/2.1 on the AP. Video on that to come soon.

I heard of this but never took it seriously or looked into it because the name is hilariously cute (and brilliant) but I also don't have a robot. So that's probably mostly why.

Since the piston never touches the water , because there is always a air pocket between the top of the water and the botttom of the piston, i guess i don't understand the reason to preheat the piston (has no contact with the hot water). Cheers

@mescellaneous

5 ай бұрын

even being shown the data to prove it, you still use pseudo logic huh

PS: where did you buy the Thundies?

@BrianQuan

Жыл бұрын

The entire intro of the video tells you lol...

@jakobw135

Жыл бұрын

@@BrianQuan seems I miss that. 😀

Nice, needs a handle.

A $400 Aeropress!

My concern with the robot is the food grade silicone rubber seal of the plunger I don't know if I can trust the company because it's made in China and they don't have the best standards when it comes to these things.

@mathemat3939

10 ай бұрын

Almost all your home appliances are made in china.

If I can only have a robot or Flair 58, which should I choose?

@ZonalJump97

2 жыл бұрын

I feel like the Flair 58 would be a better option Electric heating, pressure gauge in as standard, uses normal 58mm portafilters handles and baskets

@clegg2005

Жыл бұрын

@@ZonalJump97 thank you! That’s the way I’ve been leaning.

Which scale are you using in this video?

@BrianQuan

2 жыл бұрын

That is the weightman/neoweigh! I made a video about it you can check out

Seems to complicate the workflow quite a bit.

@thomasfitzgibbon1675

2 жыл бұрын

This is why I only keep medium roasts at home. I won’t manage an operation like this until I’ve had my caffeine fix