Thunderbolt 1003 Restoration
This is the montage I made to outline the process of restoring my Thunderbolt 1003.
Some background:
It came from Big Lake, MN. I don't know if it was in use there or if it just came from someone there. The date code says 1984. It was originally 3 phase model (1003A) but I converted it to single phase with a GE 7.5 HP blower motor and a 1/3 HP rotatory motor. The RCM1 was also converted to single phase. Besides a new paint job and the things listed above, it is original.
Here is a link to more information: www.thesirenboard.com/forums/...
Sorry for the portrait layout in videos, I used my phone to record.
Пікірлер: 49
Ah yes, my favorite siren.
YOU got a tbolt!!!! AWSOME
@deaderthandead1182
5 жыл бұрын
OWS Crazy1 Jeez..
Nice!
Nice job!
Very Cool!
Nice job restoring it man.
Nice thunderbolt in 2018!!!!
My old middle schools 2001 siren needs to restore the control boxes
Nice! What’s the model of the camera did you use for this video?
@quantumbox.
5 жыл бұрын
I used the camera on my Galaxy S8+
@mrsirendude6931
5 жыл бұрын
Hey you I have samsung galaxy S8 to :D
@Four-r8slol
2 жыл бұрын
@@quantumbox. i have galaxy j8
Isn’t a thunderbolt 1000 chopper essentially a completely redesigned model 2? I mean when it’s put into the 1000 shel with the blower blasting air into it, it’s 10x louder than a model two, but that’s all they had laying around to make a siren that was meeting the demand of civil defense right?
@quantumbox.
6 жыл бұрын
Keaton0801 The chopper assembly is essentially a model 2. The blower on the Thunderbolt provides the extra air needed to boost the sound output. And yes they used the same parts to make it easier to replace broken parts
This 1003 I bet was in Service in Big Lake MN but not sure if a replacement 2001-130 took its place also is it hard to convert it from 3 Phase Power to 1 Phase Power does that make it quieter in terms of sound and performance output
@quantumbox.
5 жыл бұрын
Converting the type of input power doesn't make it quieter it just requires more amperage and a redesigned RCM1
@flyoversirens3704
5 жыл бұрын
You would have to replace the motor with a single phase.
@porcupinepunch6893
3 жыл бұрын
@@flyoversirens3704 no you wouldn't
@flyoversirens3704
3 жыл бұрын
@@porcupinepunch6893 You could use a phase converter but at that point it would just be cheaper and easier to go ahead and switch the blower motor itself to a single phase unit. To answer the original questions; Yes it is somewhat difficult to go from 3ph to 1ph power, and no as long as the blower motor is still able to turn the blower at the proper RPM the performance will not be affected. It would, however, draw more current than a 3ph blower.
@porcupinepunch6893
3 жыл бұрын
@@flyoversirens3704 how so? I can probably put together a bunch of capacitors and run the motor on split phase for probably cheaper than I could buy a new single phase motor.
Can you make a new update video on it if you still have it?
wow
Why don't you ever use hi-lo on this siren or the AF timer?
cool
Very cool!!
@deaderthandead1182
5 жыл бұрын
danielle Tripkoff very stolen comment!
It needs new bearings for the chopper
@quantumbox.
5 жыл бұрын
The bearings were replaced with ones that aren't the best quality. If I can find ones that fit it that are better quality I will replace them again
What motor is that on your 4m? I'm looking to get one since I'm getting my own 1003 next week and the blower motor is 3ph. If you can, can you tell me the model and everything so I can try and look for one?
@quantumbox.
2 жыл бұрын
I used a pretty standard refurbished 7.5hp farm motor. I choose one that fitted the original specs (1750rpm, same sized frame, etc). Check with an electrician for more concrete information and make sure you size the motor starter correctly (and potentially rewire/rebuild the RCM1) and any wire you use. Luckily, (and to my knowledge) you don't have to use the Furnas motor starters, so long as it's the same NEMA size. (Disclaimer: I'm not liable for anything that goes wrong and you should always use your best judgement and consult licensed professionals). Good luck with it!
@SouthCarolinaSirens
2 жыл бұрын
Thanks! And I wouldnt have to rebuild the RCM1 since you just need the 3rd phase for 3 phase motors, you just wire your single phase to L1 and L2. Id most likely only have to replace the blower contactor.
Where did you get the siren from? I've been searching ebay for a while now.
@quantumbox.
5 жыл бұрын
It came from a place in Minnesota
@mrsirendude6931
5 жыл бұрын
You can make a mini one though
im jealous XD
Hey does any one know how to get one of these that needs restoration too because I want one and if I just have to pick it up and pay i would love to know thank you ?
@quantumbox.
3 жыл бұрын
My advice is to check The Siren Board wiki, sites like eBay or Govdeals and just randomly searching for retired sirens in your area. It's getting harder everyday to find these since it's usually cheaper to let them sit as they were installed and rust or fall apart. Many places don't have the money, have political issues or don't care enough to sell it for parts, opting to scrap or leave them. Good luck!
@hollystrike5012
3 жыл бұрын
🙏
Qayyum
It sounds like a malfunctioning Thunderbolt
@vantaaax
5 жыл бұрын
Uh. No.
what is wrong with the footage it's broken!
@TexasRailfan2008
4 жыл бұрын
Trains Of KansasINACTIVE yeah!
The footage is damaged
@quantumbox.
3 жыл бұрын
Yeah, it's older and shot before I actually cared to post it to KZread. It was supposed to be just for personal record
@kansasstatealerting2424
3 жыл бұрын
@@quantumbox. Ah I see, also how is the bolt doing how?
@quantumbox.
3 жыл бұрын
@@kansasstatealerting2424 Good. I'm thinking of remaking this video and making a small documentary about it. Not sure if it'll happen, but maybe.
@kansasstatealerting2424
3 жыл бұрын
@@quantumbox. Ok.