Great video:) I am setting up my friends DX7 for a delta. This video helped a lot. Thanks, and thumbs up:)

@vkirbys

8 жыл бұрын

+Håvard Støre Andresen - you re welcome, safe flying!

Thanks!

An excellent video. Thanks for pointing out this very simple solution to a nose up or nose down pitching moment when applying course throttle . The devil is in the detail MIXING and CG is flight critical on a flying its importance is paramount thanks again as i did not think this was possible your video is the only one that I have seen which highlights this ability and you did it on a DX7s which is the Tx that I use . I am new to RC and have picked a 53in flying wing as my first model three channel easy to fly and set up. Could you please do a video on dual rates , expo and elevon setup.

Friend, how do I Ascer blue light in my DX7s SPECTRUN ?? This function exists or you did an installation on the board? grateful

I opened the transmitter and modified it by adding a light, if you search google you should be able to find out how to do it

i need help, i have a V tail airplane, with 2 servos on the tail, elevator is fine, the problem is with my rudder, its invert and my radio is a dx7, how i can fix that. the radio on the manu only show r ele and L ele, it doesn't show rudder as option

@vkirbys

8 жыл бұрын

It is a long time since l did, the video and l do not have my v-tail plane any more, but if you have a V tail plane l think maybe you need reverse the 2 channels that you can see in your transmitter menu

@aldoyosbel1728397263

8 жыл бұрын

+vkirbys that is the problem. It doesn't show rudder as option. It only says L ele and R ele

@Mr89Falcon

3 жыл бұрын

My Spektrum DX6e has an option to select “Elevon-b” after “Elevon” on the wing setup...that solved my reversal problem!

Thanks for the vid. I'm thinking of getting a spektrum transmitter - can't I just reverse channels if needed within the transmitter settings? why would I need a separate cable? kzread.info/dash/bejne/lpxtkruMdbuuetY.htmlm3s

@vkirbys

9 жыл бұрын

I do not think you can setup Elevon function without using individual cables to the servos