Like many others that have commented I have been doing it wrong for many years. I watched this video last week, and since I knew I was going to thread up to a flange for a job this Week, I tried it and it worked absolutely perfect! I may never thread toward the chuck again. I have enjoyed many of your other videos too! Thanks again.

I started work as an apprentice in a toolroom at the age of fifteen making press tools and although I'm retired now and at the age of seventy five still have my own workshop with twelve machines making model aero engines, I sometimes go on KZread to see what other guy's do in engineering to pick up some tips but some make me cringe with fear but you Joe remind me of my old boss when he said to me as a boy, you will never stop learning about engineering for the rest of your life, someone will always come up with a new or fresh idea and looking at what you do proves him correct, I would like to work with you in your shop but I reside in the U.K, Keep up the good work.

@nicscott8560

4 жыл бұрын

I am in the beginning of that process. I am 16 and just started my apprenticeship. I am planning on using my toolroom knowledge to build band instruments.

@quinka2

4 жыл бұрын

Congrats Phil, I am 78 and been a toolmaker for 50 years now and tired of seeing the rush, rush of todays toolroom. CNC edm machines, both sinkers and wire, made the EDM process much more efficient and faster, now they can make sub gates with ease while doing something else, no more parrafin oil, just purified water, EDM machines almost made grinders obsolete. Textured finishes bypasses mold polishing saving huge times. Now EDM's can provide 63 finish easily! Its a new world.

@johnlayzell4748

4 жыл бұрын

you are ok mate safety first.

@stuarth43

4 жыл бұрын

Me too ole boy

@stuarth43

4 жыл бұрын

have you worked on french machines with no half nut Phil

An old machinist taught me this trick back in the 70's. Often got comments from boss like, "I don't want left handed threads", but they shut up when they saw the results. Thanks for sharing, Joe. I hope the young guys are listening.

@joepie221

4 жыл бұрын

Me too. I like to believe they are.

@clemkadiddlehopper7705

3 жыл бұрын

@@joepie221 I wish someone around my place had a mixed shop like you do so I could ply my conventional machine skills. It's all CNC and younguns out of tech school, though. One day when transistors get fried, they'll come knocking, I hope.

@firinmahlazorz

3 жыл бұрын

@@joepie221 we are listening.

@earlhuff7847

3 жыл бұрын

Yes sir we are listening. I was doing threads on rifle barrels going in for about 6 months and having issues stopping the tool in time before I hit the shoulder of the barrel. Especially on fast threads. I knew there had to be a better way. Now I am going out and my product is much cleaner, better threads, and far less stress.

@wafikiri_

2 жыл бұрын

@@clemkadiddlehopper7705 Before transistors, the first electronics I learned were vacuum tubes: diode, triode, pentode, etc. Now that they are thinking of sending probes to Venus once again and worry for electronics to be fried up there, old technology could work fine and safe.

Man Joe I am truly humbled with your skill set! As a rookie I appreciate you taking the time to share your tips and knowledge , thanks again . Charlie ( Louisville Ky)

To my You Tube viewers. I welcome all feedback, negative or positive. Naturally, this technique has saved me hundreds of hours over the years and made threading more enjoyable. If you have any fears or reservations about the advice, by all means run your machine the safest and best way for your skill set and environment. Thanks for watching.

@shawn01707

6 жыл бұрын

Joe Pieczynski First great video! Second i was just talking with a co worker about this he swears that the angle must be set at 29.5 degrees and u only can use that to adjust your depth of cut then just use the straight back to get back to zero. I said u should be able to go straight in every time as long as u clock it correct. He argued that our cnc lathe compensates a small amount each time it enters when threading to go in at a angle. (All we use is carbide) so why is this and who is correct?

@sonnyhess6262

6 жыл бұрын

With the tool upside down and threading left to right, does the 29 1/2 still apply or it the degree 30 1/2?

@Anonymoose361

6 жыл бұрын

Hey Joe, another great video! Any chance you teach machining locally, or would allow a fan to spend some time in your shop?

@chrisstephens6673

6 жыл бұрын

Ecoboosted, as no one else has answered I shall jump in. You get equally good results doing it either way, all things being equal. The old excuse that you have to go in at an angle to prevent chip crowding is just plain hogwash on any reasonable quality lathe. If using full form carbide threading inserts you might actually notice an improved finish going straight in. If you doubt this, give it a go for yourself and then you can speak to your co worker with some authority. Regrettably some classically trained machinists will only follow their tutors instructions without the giving it any thought of their own. The better machinists, like Joe, Robin Renzetti or Stefan Gotteswinter have the wit to give what they are doing some thought and will try different things. Remember that an apprentice should not just equal his master but exceed him, otherwise the trade becomes stagnant. With the likes of Joe there is little risk of this.

@charliemckay6402

6 жыл бұрын

The easiest way to measure with pitch wires is to hold them in place with an elastic band.

Brilliant, Thanks for mentioning the screw on chucks, most folks wouldn't realize the danger until it was too late....

You are a great teacher Joe - really appreciate what you pass on.

@joepie221

4 жыл бұрын

Thank you.

@machinemaker2248

3 жыл бұрын

Especially since no school will teach this anymore. You have critical, rare knowledge, and you give it away to us. God bless you.

Joe I have been a machinist for 30 years in South Africa and have never seen or thought about your technique ! Wow This video is great so simple but a completely different way of looking at thread cutting Shows you are never too old to learn Thanks so much

Great tips. Wish I had a machine shop, still I find this entertaining. Better than what's on TV!

@joepie221

7 жыл бұрын

I find your screen name entertaining. Good one.

@billy19461

5 жыл бұрын

Way better than 📺 TV

Thanks Joe, it would have saved me a lot of grief if I had been taught this as an apprentice in 1965!

Would have loved to have known this trick back when I was staring out. Learned it about ten years before I retired after many butt cramps. Thanks Joe.

Phew, I think I have motion sickness after watching that. I’m glad Joe is now using a tripod for his videos.

@kurtbilinski1723

3 жыл бұрын

Haha, yeah, it's like watching a bike or car race via helmet-mounted camera, without the excitement but all the nausea.

I thank you sir, not only a clear description of how to thread, a clear description of the easiest way to thread……and no damage to the machine is possible. I am appreciative of you help sir.

@joepie221

Жыл бұрын

You are very welcome, good luck.

I really like this method I single point thread gun barrels and you are right it gets intense I used your method today and it was perfect. I noticed that the thread was cleaner and was like the easiest job no stress. thanks for showing me your tricks

@DartSlinger

5 жыл бұрын

What lathe you use for threading barrels?

The only man I know of who ran his tool into the tailstock while he was checking his watch, flexing his fingers, doing ten pressups, getting a coffee, and waving to the camera! 😜 Good info as always, thanks

@joepie221

3 ай бұрын

Classic.

Awesome tip Joe. I've been machining for roughly 25 years and just learned something today. Thanks!!!

At 10:52 I use the term pitch diameter. This is not what it really is. The dimension you will get by adding the 'Add' value from the PD chart that comes with the wires, and nominal OD size of the thread, is a reference dimension for use with the actual pitch diameters from the machinist handbook. You subtract the 'Constant' value from the wire chart to calculate the PD of the thread. This will get you very close to a working thread in the absence of the high and low dimensions that govern different classes of threads. If you have any questions, just ask and I'll try to answer them.

@donking6527

6 жыл бұрын

Joe Pieczynski thanks for explaining ,I was wondering about that

@rickmalm7299

6 жыл бұрын

Great teaching, I've used that same way for many years. I have only one suggestion, personally I have found placing two "PeeDee" wires horizontally on top allows me to hold the third wire level under the part making it easier to handle & feel the mic fit.

@jimzeleny7213

5 жыл бұрын

I often wondered just what the three wire method M gave you. So drew it up on a CAD system and found that you calculate M and that gives you the top limit of a class 3A thread. You would cut slightly smaller to achieve class 2 or 1 geometry. One other thought is to use twist drills in place of the wires. Just as effective, but more likely to be found in most shops.

"Who'd of thought" great idea. Can't wait to try it, great video Joe. Thanks for sharing

Hi Joe, aussie fitter/machinist here, love the vids, appreciate all that you pass on. Your workshop looks immaculate, that lathe bed one could eat off! Keep up the good work. Btw, I love threading up to a shoulder etc keeps me in the zone, but I will definately try that method, clever!

I never thought about this way to cut threads. Absolutely brilliant...now I know why I subscribed to your channel. This channel is gold for tips and trick regarding machining.

After watching this Sunday night I used this method to cut a 32 TPI thread today on what would have been a blind end , I must say being an amateur Hobbyist this worked well for me and saved a lot of tense moments that i normally have , lucky for me my Lead screw is 4 TPI so no need to use the Engagement dial in this case . I really enjoy your presentations and have used many over the last few years. Thanks again.

@joepie221

11 ай бұрын

Its good to know these videos are helping. Threading can be very stressful, but doesn't have to be. Good luck and thanks for the feedback.

Colchester Lathe! well i remember being shown this technique at Reading skill centre UK on a 1 1/2Whitworth thread in 1983. They made us do the trig with drill wires before letting us use the charts lol, thanks for sharing this

@1ginner1

5 жыл бұрын

Tool will have been hand ground too ill bet, me too. Pain in the arse , but when the nut went on, WOOPEE. lol

@jgt5463

5 жыл бұрын

It appears to be a Clausing Colchester Lathe. The most user friendly engine lathe. It is not. Chinese?

@evaliket

5 жыл бұрын

I continue to be impressed by your common sense approach to machining things that should be taught but aren't, thank you

I am 33 years in the Plumbing trade and I am a "hobby" machinist at home. Now I know what it's like when I tell new plumbers the "right" way to do it, or the "book" way to do it. Thanks Mr. P

@joepie221

5 жыл бұрын

Be gentle for best results.

Posting again to say I'm still using this threading process about 4 yrs after learned of it here. Great process...it changed my life...threading on a lathe.

Wow, I have been trying to figure out how to cut metric threads on an imperial lead screw against a hard shoulder. So easy using this method. Thanks Joe!!

@mikebowling3228

5 жыл бұрын

David, Not so sure that would work. My experience is with metric on a imperial lead screw is you cannot release the 1/2 nuts, you have to reverse the spindle and keep the 1/2 nuts closed until finished.

@livewire..

5 жыл бұрын

@@mikebowling3228 I should have explained a bit further. In the case of metric threads I am not releasing the half nuts but just powering off the motor at the end of the cut. I then reverse the motor back to the right of the thread to reposition for another cut. It's not what Joe described exactly, but I am using an upside down cutting tool and cutting right to left.

@samec88

4 жыл бұрын

This is a great idea for that when you can't release the half nuts. Removes potential disaster if the spindle doesn't stop immediately upon power off

@joecnc3341

4 жыл бұрын

Yep- you can't open the half nuts typically. Reverse the lathe close to the hard stop.. then manually crank the lathe into the hard stop

To all my viewers. Please exercise caution and use good judgement when running a machine with a true screw on chuck. Excessive spindle load with the machine in reverse could potentially unscrew your chuck causing damage and personal injury. Refer to your operator or machine manual for safety suggestions. Cam lock or keyed and collared chucks are the safest to run in reverse. This demonstration is for reference only and should be used at your own discretion.

@204savy

7 жыл бұрын

Joe Pieczynski Hey Joe any recommendations on a gun smithing lathe? I would really enjoy talking to you about some things I am young and green at this stuff!

@joepie221

7 жыл бұрын

I don't know enough about gun smithing to suggest one. You'd have to know about the biggest longest part you expect to hold, how you expect to hold it, and what type of feature you plan to cut, then start looking.

@204savy

7 жыл бұрын

Joe Pieczynski hey mainly it would be secured in the headstock for threading the end of barrels and clambering the rifles in about the 20-28 inch range but is usually held near the headstock. I also would be interested in milling flutes into the barrels as well. Just wondering if like a grizzly gunsmith lathe is really any different than some of these other lathes

@kyorising

7 жыл бұрын

A grizzly is ultimately going to cause you potential headaches when you need super precision, check out south bend for the cheaper side, monarch ee if you want to spend some cash.

@mauricedamask6357

7 жыл бұрын

Joe Pieczynski very good I'll try it

This is the single best machining tip on the internet! I have totally switched to cutting my threads with this method. It’s way faster and there is no stress. Thank you Joe!

you are a true master. I'm glad I found your channel. still waiting for my lathe to arrive, and trying to absorb as much knowledge as I can beforehand thank you!

@joepie221

2 жыл бұрын

Welcome aboard! Be safe when it arrives.

Nice video some good advice. The same can be achieved using an internal thread bar on the opposite side of the stock. Spindle still runs in reverse but the rotational forces will be directed into the solid tool post. The tool won't be lifted off of the tool post should it become loosened. You still need to be aware that the chuck can still come loose though.

@joepie221

7 жыл бұрын

Your suggestion is good, but conditional. On longer parts, or parts between centers, it can't be utilized if a long part is exposed before the threaded area. In all my years, I have never positioned a tool on the back of the part in a conventional engine lathe. I was just never shown or exposed to that technique. One day I'll have to try it out. Thanks for the comment.

Thank you for posting the threading tip, very informative. The only thing that could make this video better is a tripod. 👍

@joepie221

7 жыл бұрын

I am shooting more with a tripod lately. It does make for better viewing. Thanks for the comment.

I've been using this method since the first time I saw this video. It's way less nerve racking than threading towards the headstock and my threads are looking much better and more consistent. I just watched again to see if I was missing anything. Thanks!

Brilliant and elegant (in a way, I feel stupid for never having thought of threading this way). And a great video , too! Thanks for sharing your experience.

Great tip on loosening the tool post tension so the tool will lift out of the cut if needed, also for form tooling. Very interesting. Also, a nicely done instructional video. One thing would make it easier to watch: placing the camera on a tripod. Hand held is difficult to control, even more difficult to watch. Thanks for sharing!

@joepie221

7 жыл бұрын

Jim, Thanks for the feedback. Aside from my scuba diving equipment and diving videos, this is the first video I shot about machine shop related material. Sorry about the 'Blair Witch' effect with the hand held camera. I'll have to rig up some good camera holding stuff and go from there. Some of the other videos do have tripod shots inspired by other viewers. Thanks for watching.

@dennispasek4209

7 жыл бұрын

Especially with that wide angle lens with so much barrel distortion.

@joepie221

7 жыл бұрын

GoPro

You need to be careful about spindle and lead screw direction. Some lathes have left hand screws and an odd pitch. I ran an older LeBlond lathe that had a 7 pitch screw that was left hand thread lead screw. It was a wonderful lathe for double lead threads. Even number on the dial for one thread lead and odd number for the other. I am glad you show checking pitch diameter with thread wires. I would suggest for a coarse thread move the compound 29.5 degrees toward the chuck. Good video.

@guilbertbabcock6500

6 жыл бұрын

ty

Thanks Joe for taking the time to educate me. Well done as usual!

I’ve been a machinist for 20 years and never thought of this. Great tip especially for people new to single point threading.

Hi Joe nice video I'm a machinist/toolmaker been single point threading in reverse for about 40yrs it's to bad young people don't want to learn this trade not sure how anything is going to be made in the future

@austinatkinson4344

5 жыл бұрын

I’m 16 and in high school and dual enrollment for welding, then my plan is get an associates in machining too. In my own welding classes I spend almost the whole class machining my own projects or parts for other people. There are some other people as interested in this field as I am but not many.

@drafty0183

4 жыл бұрын

Well, I work in a small machine shop. We have one old engine lathe, an old mill, and a radial arm drill, as well as several CNC mills and lathes. Most items are made by CNC production these days. It's more about optimization of the machining program these days, to churn out as many parts in as short a time as possible. Crash prevention is mandatory!

Up side down thinking.. Brilliant sir ;)

@joepie221

7 жыл бұрын

I swear by, and stand by this technique. It works great.

@Lee-dn3ou

5 жыл бұрын

You can go right side up with it in reverse and plunge in from the back side as well

@ianmoone2359

3 жыл бұрын

I think this technique might have been invented downunder! We spend a lot of time upside down! The Southern Hemisphere corriolus effect tends to make us think opposite to most of the world above the equator. 😜😂😂😉👍🇦🇺

Incredible! You are the man. I could watch you all day long and learn from you

Thanks Joe. I did some threading on a Clausing Colchester lathe, other times, on a big VDF lathe. Most of my lathe work was on a Hardinge chucker, with the threading attachment. We used the wires gauges too. I did internal threads, as well as external, we never used to call them A and B. I did learn a lot there, everything from lathe, to jig bore, to tool grinding. It was a nice clean fully equipped shop, it’s just too bad that my boss was a jerk (putting it nicely) and the owner wouldn’t reign him in. That shop couldn’t keep a decent machinist as we left 2 and 3 at a time. Seeing your shop reminds me of those days!

you can also engage the half nut before you rotate to eliminate errors in catching the right line on the chasing dial

thanks Joe, I too am retired and have used this method for years. never dawned on me about the screw and the chuck rotation. cheked it every time

absolute gold. Thanks for sharing, my next thread I'll try in reverse.. talk about a fast thread. cheers. going to scope the rest of your posted knowledge

Joe your the bomb! Thank you for sharing all your knowledge and taking time to make these video's, I for one am very grateful for guys like you....

Just found your channel and have subscribed. Thanks for sharing your experience. I do encourage you to place the camera in a stable holder, not free hand. Otherwise, it makes for a dizzy viewing experience. Understand you did not have the right gear then. Until next time, cheers. Daniel

@joepie221

7 жыл бұрын

Welcome. Thanks for signing up. I will be trying to use a stationary mount whenever possible.

@spankeyfish

7 жыл бұрын

Make something so that you can attach the camera to a magnetic dti stand then you can stick that wherever you want on the machine

@joepie221

7 жыл бұрын

Thanks Daniel. Welcome. I'll get better at the camera work. This was my first machining video. I think you'll find the more recent ones a bit better.

@joepie221

7 жыл бұрын

Great idea on the adapter for the camera to a mag base. I will do that.

Hello Joe, also your carriage moves away from the swarf instead of over it and we all know what havoc brass can make in your slides. Thanks great video PS what lathe is that?

@steveallarton98

7 жыл бұрын

lostvikinga Hi, That's a Colchester lathe, a long-bed Triumph 2000, I think. Nice solid machine. I've got the smaller Student model. British engineering, sadly no more . . . .

@cdp9633

5 жыл бұрын

@@steveallarton98 Hi there, it's fantastic to see that the conversation from this vid is still running 2 years after its launch. I had experience of the Colchester Triumph 2000 lathe during my apprenticeship in 1973. Our training establishment (Newcastle College) had two new 2000's among the older Student square-head lathes. I preferred to Student probably because I had more time on it and found it a delight to use, but the 2000 was an impressive machine. I now have a 51 vintage Boxford A and will try Joe's reverse threading technique next time I'm cutting a thread.

brilliant joe,thanks for taking the time to show these vids of yours, subscribing now. Dan U.K.

Half the time I have no idea what you are talking about but your passion makes it so enjoyable to watch.

@joepie221

7 жыл бұрын

This was my first machining video. Its rough, but I think I made my point. Thanks for watching.

Joe, I'm still learning but I didn't see you use your compound to make the threads deeper. Did you do this because the material in the video was soft brass or could you also omit the compound if threading harder material? Thanks for the education Joe.

@joepie221

2 жыл бұрын

I usually just use the cross slide.

"If you half thread a 10 pitch thread you end up with a 20 pitch thread". I get what you're saying, but really you have a double lead 10 pitch thread :)

@joepie221

7 жыл бұрын

Your comment is accurate, but....I always thought if you had a double lead 10, the actual pitch was 5TPI x 2. I have only cut a few double lead threads ( intentionally ) in my entire career. Am I mistaken?

@andregross7420

7 жыл бұрын

By double lead 10 I meant two 10 pitch threads intertwined with each other. 20 thread crests in one inch, but with the helix angle of 10. I guess I stated it wrong

@DavidTaylor-es1bt

6 жыл бұрын

I know I'm a year too late to this party, but the way I was taught is that the term "pitch" is independent of the number of leads. So a double lead 20 pitch thread would have a lead of 0.1" . Or you could say pitch is threads/inch and lead is how far a nut would travel/revolution= number of leads x inches/thread.

@robertlawson8572

5 жыл бұрын

@@DavidTaylor-es1bt ....You say "pitch" is independent of the number of leads.... Actually, lead divided by number of "starts" equals pitch, so lead and pitch are interdependent, and generally, any screw can only have one lead. Lead, as you say later, is how far the appropriate nut would travel per revolution on a screw... (your statement sort of confirms what I'm saying?) Perhaps North American terminology differs, though. When you're screwcutting, you're setting the machine for the "lead" irrespective of pitch, and achieving pitch by any of a number of forms of division for starts. Easiest way on the Colchester/Hardinge in the video is indexing via the camlocks for two or three starts, and few people ever need more than that... Actually, I've re-viewed the video, and since that's a Master, Student or equivalent, that advice would only work for three starts, the machine having only three camlocks... Larger machines have six, allowing two, three or six (unlikely) starts to be performed simply. Worth remembering that standard threading inserts may not have adequate side clearance for the extreme lead angle of a multistart thread. Guess how I know? (Just once, though!) I was later to the party than you, too...

@stevenmassey7586

5 жыл бұрын

@@robertlawson8572 Fellas tho I'm late to comments I'll throw this out there. Thread pitch is the distance from the root of one thread to the root of the next. It's does not matter how many leads a given thread has since the only way to cut a multiple lead thread is with all leads having the same pitch be it sae or metric. A machinist handbook is a wonderful thing, as no one can possibly remember everything that's in there ! Well someone might but I doubt there would be more than three in the world , lol.

As an apprentice Toolmaker in the UK in the early 70's, one of our Toolroom turners showed me this approach to screw cutting but I didn't use it until I saw your KZread video probably a couple of years ago. It really is a game changer, I wouldn't do it any other way now. I think you also probably said you can also run the spindle at a much higher speed more in keeping with the material and diameter, another huge advantage. Brilliant Joe. Keep up the great work

Hi Joe. I've been looking at a lot of youtube channels to recommend some for my son in law who is learning to use workshop equipment and yours are right up there at the top. I'm a time served toolmaker myself so I'm less than impressed by most of the videos that are out there. Love the video above as it is exactly how I was taught here in the UK 35 yrs ago. Of course then they made us use HSS tools and hand grind them ha ha! We were also shown to use the rear tool post where fitted with the tool 'right side up' which was handy if making a batch of the same part. 17 years old and they had us cutting a twin start square thread on a long brass collar that we had previously turned and shrunk onto a shaft we made with various tapers and shoulders that were cut to various tolerances! Great experience! Please keep up the good work.

Good way for beginners to learn . If you use a live center , you would still have to stop the machine at the right time ,right ?

@joepie221

7 жыл бұрын

That depends on the size of the part and the size of the live center. The disengage zone would still be considerably larger and easier to hit. Look in your tool catalog for an extended live center. It helps.

@horseshoe_nc

7 жыл бұрын

My home machine shop HS53 today was the first time I used Joe's method. I threaded some parts I have made before. 3/8-24 thread. With the traditional way, 140 RPM was about as fast as I felt comfortable, no undercut to stop in. With Joe's method, even using a standard live center, 270 RPM with ease. May be able to go one step up to, 370 RPM. But, even at 270. It was still a lot faster than the old way.

@Lee-dn3ou

5 жыл бұрын

True but more forgiving

THANKS for this.Excellent method...barely explained...with horrible video. That's OK. You introduced something we ALL need to learn. Now, I'll go find someplace that teaches it better. THANKS AGAIN... AND PLEASE GET A TRIPOD.

@joepie221

Жыл бұрын

Praised for the material and bashed for the presentation all in the same breath. Well done. How about read the video description before hitting the keyboard next time.

@causewaykayak

Жыл бұрын

We rarely see what the Speedmouth Critics can produce. Maybe its smart just to turn off Comments and leave the moaners to stew.

Joe, I just wanted to say thanks for the “upside down threading” tip. (Internal and external). It takes the stress out of threading a 500.00 rifle barrel. Kudos my friend!!!

I'm 64 years young and an old school machinist. I love your videos because I still learn new tricks from you. Unfortunatly these days, not many "machinists" have a clue about what your doing because of CNC's. One of the best CNC boys I know, looked at me running a Bridgeport and said "I wouldn't even know how to turn this on." Kinda a sad state of affairs. Keep doing what your doing Joe. Would love to work with you.

@joepie221

5 жыл бұрын

Old school manual skills are dying in this country. CNC and 3-D printers are taking over. Too bad.

Also, this allows you to run at higher speeds which carbide likes

@joepie221

7 жыл бұрын

I wouldn't do this any other way.

@jaspermcconnell6417

4 жыл бұрын

I may have to try this to eliminate my corn cob threads. My old lathe had so much chatter that I could not improve any thread.

Hi folks, one thing to watch out for, this method is great - if your lathe has the appropriate spindle bearings and does not have a screw on chuck.. You really need two opposed taper bearings because the cutting load is being applied away, not towards, the headstock. It would not be the best way of thread cutting on a Myford Instrument lathe for example. As the spindle is run in reverse a screw on chuck is in danger of being unscrewed. Again a problem on a Myford.

@joepie221

11 ай бұрын

This is a valid safety concern and clearly spelled out in the video description.

Best advice ever for single point threading. I’ve witnessed too many people go toward the spindle and make costly mistakes. As an apprentice at the time I asked questions that where met with the “That’s how it’s done”, you want right handed threads you go towards the spindle. Then in later years there was a more mature seasoned machinist that threaded away from the spindle. The question was asked why, and he explained in plain terms that it was safer for the person tooling and the equipment.

Joe! I have been a machinist/toolmaker for 45 years, building and maintaining plastic injection molds and progressive dies, yet your teaching me new things daily with your videos, thank you sir!!! I always plunge my threads on engine lathe taking 2 passes at .001 each time with tap magic to shine them up! Over the years however, using thread wires required too much time, so using a nut would suffice, but that is wrong, yet the "new way"! What is happening with todays toolmakers Joe??? With the exception of computer frames, metal stamping dies seem to have gone by the wayside and replaced by plastics, for very hard plastic, we have fiberglass filled plastic molding, ceramic molding, all injection molding. Fortunately, I am 78 now and don't need future speed and lack of quality. Thanks for all your videos Joe!!! Well done!

@joepie221

4 жыл бұрын

I appreciate the comment.

as long as you remember to turn the lathe on in reverse.... don't ask...

Joe, sorry if this is a dumb question but I read through most of the comments but didn't see this asked. My lathe has the compound set somewhere between 29º and 30º, angled toward the chuck. similar to yours in the video. If I were to flip and center my threading tool to cut away from the head, wouldn't I need to swivel the compound the other way to feed toward the tailstock to keep out all the slack on the leadscrews? I don't know if my machine would be rigid enough to plunge straight in with the crossfeed.

@adrianrubio5396

7 жыл бұрын

I had the same question. I haven't seen it answered.

@glenndavis2762

7 жыл бұрын

I cut threads traditionally with the 29 deg method, but have since adopted Joe's approach and just feed with the cross slide and use the inverted tool. It just seems to work - I do however use carbide inserts, so than may help.

@gyromike1966

7 жыл бұрын

Last weekend I made a height gauge for the lathe to recenter my tools like in Joe's other video, and flipped my threading insert while I was at it. I cut a 32 tpi thread inverted just plunging in with the crossfeed and other than I went slightly too deep, it looked perfect. Smooth, no tearing, and no clenched butt cheeks cutting away from the chuck!

@glenndavis2762

7 жыл бұрын

yup, I've had a few threading jobs as of late and this inverted method is so awesome, my DTM holder (CA size) even has a pocket for the inverted insert - never really noticed it until I decided to try it. I'm doing internal threads the same way with a boring bar/lay down insert style tool.

Joe that is an absolutely brilliant technique to chase threads without having a heart attack waiting for the end of the thread cut. I've been there many times! And thanks for showing us how to use threadgage wires..... I always used to use either a thread Mike or ring gauge. But the thread pitch wires sounds like a very easy and reliable way to check your pitch diameter. Great suggestions!!!

It's great to see old school machinists sharing their knowledge online. I'm sure Joe remembers the days when these tricks were never shared. Well done Joe, will have to subscribe.

@joepie221

3 жыл бұрын

I do remember. Many times, the guy next to you would throw a rag over his work as you passed by or stopped to talk. It was a different time back then.

This video relaxed my butt cheeks.

@joepie221

7 жыл бұрын

Glad i could help. Threading is actually easier when you aren't holding your breath.

@cannonball666

4 жыл бұрын

Mine relaxed so much I almost had an accident.

@alessandroandrenacci2372

4 жыл бұрын

@@cannonball666 sleeping when lathe was spinning ? Ah ah ah ( joking )

How can u do this and only cut with one edge I always get better results with one edge

@joepie221

2 жыл бұрын

Try it with the conventional compound setup and feed. But take the backlash out of your compound each time so the tool drag doesn't pull the tool deeper.

I Like It.... after years of threading the old way just tried your method, no more crashes or panic. many thanks Joe, never too old to learn

Joe, thank you for all the videos! I learn more each one I watch.

Im going to have to call BS on the straight in plunging of the tool for each pass. The tool will be cutting on both sides of the point and the trailing edge will be moving away from the work and tearing not cutting. This might work for hacking or quick and dirty but not really a good method to practice. Cut with the compound on the angle of the thread and set the X or cross-slide to 0 when you first touch-off. After each pass retract the X , move to Z 0 then X 0 then advance the compound (on the angle) the amount of the next pass - repeat until finished.

@joepie221

5 жыл бұрын

I disagree with this comment at about the 99.8 % level. The material to tool impact is still straight down. If the thread you were cutting was 1 turn in 3 inches, maybe your observation would matter. Maybe. Otherwise plunge threading is a perfectly acceptable method on machinery rigid enough to do so. Faster too. For what its worth, you should remove that high speed milling video on your channel since its not even close to real high speed milling. Look it up online. Ingersol-Rand uses high speed cameras to view the machining process since the machining is so fast, the naked eye can't process it fast enough. Loose the rubber gloves too.

I'm not a fan of this trick... i've used it once with a boring bar for a particular metric tread. but the problem is you put the pressure now on the upside. (lifting the carriage). it will not look as easy with a tailstock setup and it can dammage and unscrew the chuck on some lathe like mine :)

I haven't cut a thread on a lathe for many years, but was intrigued by the title when I was looking for something else. Really interesting. Thank you.

Hi Joe, I'm a retired tool maker and appreciate what you are doing to show the younger future machinists " how to " . It is a talent that is not taught enough in trade schools that is if you find any. Thank you for sharing you knowledge. John

Please, please, please get a tripod under the camera and use it. I really enjoy the contents of your videos, but sometimes cannot finish watching because I get dizzy from the constant movement of the camera in short, jerky motions. Maybe a second camera would help with the switches in viewpoint? Keep up the videos though. Thanks.

@joepie221

3 жыл бұрын

This was my first machining video ever. 5 years ago. At that time I never intended to have a machining channel and this was done in one take. I would hope you would agree they have improved.

@patrickpayton6669

3 жыл бұрын

@@joepie221 Sorry, I should have looked at the date first! Subsequent videos are definitely better and enjoyably educational. Keep it up!

Couldn't agree more with you on the safety issue. You don't have to be an OCHA-Nazi to use common horse sense. You used wedding rings as an example. Very early in my working life, I was a witness to a chap who had his finger pulled off by a drilling machine, on account of wearing his wedding band. I can vouch to the fact, that this was a very, very nasty experience for all involved (especially for him, dah...). I never understood why, after it was pointed out to you, why you would persist in dangerous behaviour. When in my homeshop I always use safety gear, safety shoes, safety specs, gloves when appropriate etc. None of this stuff is overly expensive these days, not even the certified gear is prohibitively expensive, so there is no excuse. After more than 3 decades in industry, I have seen my share of horrid accidents, some resulting in maiming,a few resulting in death. And it is always the same sort of reason that lies at the base of these things. "Familiarity breads contempt" ! The person thinks because he has been doing a certain job or operating a certain machine for a period of time, it holds no surprises for him and he is master of the machine.... That attitude can only be described as "powerful stupid". If it can hurt or kill you, sooner or later it will ! The only defence against that is using your noggin, don't rush (regardless what the clipboard warriors tell you!) and use safety equipment where it seems a good idea to do so.... Cheers! Paddy

@jimzeleny7213

5 жыл бұрын

If you're around rotating machines just leave the gloves off.

Joe, you are the Man!!!!! I love common sense and KISS approaches to everything and especially to lathe work!

I subscribed quite a while ago. I watched this video - I now only thread away from the chuck. This is the best threading method I have used. Thanks Joe for this and many other great practical ideas from your videos. Mal

@joepie221

2 жыл бұрын

Thanks for the long time support Mal. Much appreciated.

HaHaHa, As I am self taught. Nobody ever told me what to do, or what not to do. I thought that is how you where supposed to cut a thread. Isn't that why I have a reverse button. Dam I can't imagine trying to cut a thread any other way.

@horseshoe_nc

7 жыл бұрын

OLDMAN I learned how to single point thread out of a textbook. It said to cut righthand threads in a Z- direction, towards the chuck. I tried the method in Joe's video today. I will never use the textbook method again. LOL

@donking6527

6 жыл бұрын

OLDMAN what a coincided fuck ?

@donking6527

6 жыл бұрын

OLDMAN no one gives a fuck what you learned,especially when you are old as dirt😂😂😂😂

@Ukracer

6 жыл бұрын

did you invert the cutting tool though??

@DavidTaylor-es1bt

6 жыл бұрын

Hey Don - be sure to let us know when you get your first clue.

Wow I've never thought of single pointing that way. GREAT TECHNIQUE! THANK YOU

Now I've been maching for close to 40 years .... I love your videos even if I knew how to do the operation your performing ... I figure I'm never to old to Learn something new .... Hank You for sharing your knowledge .....

Hi Joe, I'm just a hobbyist and learning to machine at a very old age. I'm not sure how many of your videos that I've watched but I've learned something every time.Please keep up the great videos and commentary.

Thank you very much I had never cut a thread on a lathe other then with tap and die. Gave it a go first time after your vid and nailed it no problem at all without breaking anything and with enough surface speed to get a halfway decent surface finish with my insert tooling. Keep up the great vids. Thanks Again

Thank you Joe. Great tip wish someone would have shown me this years ago!

Hey me again, thanks for the help. I figured out all the things my lathe and I were doing wrong. I got some really nice threads now! My threading gear was fubar and i was using the lead screw reversing mecanism instead of just reversing the motor and screw together thus breaking the gear meshing farther up the line when doing metric threads. I have wired a reversing switch and now can properly thread metric. Always learning a bunch here , thx.

You are the man!! I have always puckered threading to a shoulder. Love this trick...no stress! Thanks for sharing this technique. I'l be threading from the shoulder out from now on.

Ingenious. Thanks for sharing this inventive approach!

a super way to go ! Joe thanks for your help, it's most appreciated !

My uncle ran the machine shop at the nevada test site, you say the same things he did. He was a great machinist and always had the right machining solution weather I liked it or not. Thanks for sharing your knowledge.

really wish I saw this before my fist collage shop class, never felt comfortable single point cutting threads. I have since tried this on my little bench lathe at home and the big pigs at school, the difference is amazing ! thanks for sharing

Hi Joe, I a really enjoyed that video, very practical and excellent commentary. As a newbie and non-machinist I find I have a small base of KZread contributors who have actually become an online mentor for me and I now find myself revisiting old topics as I can understand them better now. I can remember watching this video several months ago and thinking to myself it was beyond my skill set but now I am giving it a crack. I see you got a comment about camera steady pics and I also feel this would make your videos more awesome. Love the tidy workshop too. I thank you Sir for taking the time to make your videos and share them with us as it is a really informative learning tool for so many of us. Best regards, Gordon, AUS

I belong to the Metro Detroit Metalworking Club. At our monthly meetings we usually watch a machining related video. A while back this video was featured and yesterday the situation popped up. I had to run a thread and when the tool cleared the work I would have .010 inches before I had to stop or crash into the part. Used this method to make 22 copies and every one worked out perfect with no accidents. Thank you for taking the time to show the method. It was a huge help.

Started in manufacturing 2 years ago. I only work with CNC machines at my factory (which are really nice), so these type of videos are really interesting to me... Thanks for the great video!

I've owned my JET Model 1325PBD for 30 years and never had occasion to cut threads ... until today. I have 3 submersible pumps (for hydroponic gardening) with 5/8 inch NPT inlet/outlet ports. Not only was it impossible to locate any 5/8 NPT fittings on Planet Earth, but the only place I found a 5/8 NPT threading die was on eBay ... 2 weeks away. I decided to construct my own 5/8 x 14 tpi fittings by learning how to cut threads on my lathe. I happened to watch Joe's threading hack video before cutting my threads, so I did it Joe's way ... and it worked like a champ! Cutting tool upside down with spindle in reverse ... cutting threads away from the chuck. My threads in a 1-inch Delrin rod looked like crap, but my first two attempts were good enough to engage with my 5/8 tapered pump threads and tighten up just fine. Many thanks, Joe, for a wonderful threading technique! (I'm a 73-year-old retired EE with a very nice man-cave shop in my back yard.)

Joe… I’ve watched this video several times. Thank you for sharing…. I not only find the technique amazing… I find how clean your lathe is amazing! Thanks again. All the best. Chuck

@joepie221

5 ай бұрын

Thanks Chuck. I try to avoid cast iron. It makes the machine easy to keep clean.

I really appreciate the way you explain turning operations. Your right to the point no excessive talking. You explain it clearly as to how and why. Someone like you who is a talented professional is always a pleasure to watch and listen to learn proper techniques👍

@joepie221

4 жыл бұрын

I appreciate that!

Um, this just changed my life! After almost having a heart attack threading my NIMS project, this is GOLDEN! Thank you for the awesome tip!!!!

@joepie221

6 жыл бұрын

I bet you never go back to the old way.

What I like about Joe is he teaches out side the box. He goes beyond the text books. I’ve been watching for years but now I gotta subscribe! Thanks Joe. WH from Orinda, CA.

Great tip Joe, Iv'e been doing this for a long time and it sure does make it more enjoyable.

This was one of the best videos I have seen yet. Just got an old Atlas 12 lathe, going to try this soon. Thanks

I used this technique in my advanced machining class and impressed the department head. He later recommended me for a job at a DOE National Laboratory. Many Thanks Joe.

I just started to learn working on a lathe and wondered if this was feasible after seeing everyone thread towards the jaws. And you confirmed it is. Thank you.

@joepie221

2 жыл бұрын

Its the only way I do it.