In this video we demonstrate how to thread a Merrow Machine, specifically the MG-3U model, with standard 40wt Embroidery Thread.
Жүктеу.....
Пікірлер: 41
@rosatenorio10 Жыл бұрын
Omg! You saved me. I was able to rethread the merrow machine at my job!!!❤❤❤❤
@EmbroideryNerd
Жыл бұрын
Glad I could help!
@user-bw2jg3vk6k11 ай бұрын
Wow - great video - really appreciate it.
@uponmyword3 жыл бұрын
Thank you so much! Best vid on threading these beasts that I've come across. I found quite a few errors in my own threading system, which having watched yours, explains a lot of botched attempts.
@EmbroideryNerd
3 жыл бұрын
When we started we had no training. Ours came from a craigslist sale so it wasn't threaded and had the wrong cam in. We spent just over a year trying to match typical merrowed patches. After all that frustration and seeing so many MG-3Us ending up on the chopping block we knew we had to make a video. That's what Nerds do, we try to help.
@joycelockyer11734 жыл бұрын
Great video!
@EmbroideryNerd
3 жыл бұрын
Thanks!, We're glad you enjoyed it.
@JoeF330Ай бұрын
hello i bought a new Merrow but the instructions on how to connect it to the sewing table(Helmsman) are pretty much non-existent. do you have any pointers or tutorials?
@jessiegibson9023 Жыл бұрын
Good video thanks
@EmbroideryNerd
Жыл бұрын
You're welcome! We'll be uploading more videos soon with the merrow.
@xjayrockx1014 жыл бұрын
Thank you :]
@EmbroideryNerd
3 жыл бұрын
No problem!
@yhwh4904 жыл бұрын
What is the best tension for all threads, when you are usin 5 Threads for the upper looper???? Are you usind needle 110 metric??? What number of cam are you using. I use Merrow floss an 40 cam but I wanna give anothe possibility a chance, because everytime I need to buy a Merrow floss cone wit 5000 yrds and sometimes I only need not so much for a red, yellow or green border.
@EmbroideryNerd
3 жыл бұрын
We're uploading a video right now that discusses a small portion of the tensions. But on ours we have the Needle thread tight, the upper looper is very loose, and the lower looper is very tight. We have both a #14 and a #28 cam for ours, but only use the #28 for patches. It came with the #14 so we had to get the #28 for the patch border. For needles we use 4BD-Titanium needles ordered directly from Merrow. We don't like spending lots of money on floss for every color we needed. That's why we spent the time to find the standard embroidery threads that work on the merrow machines, and that's what we use 90% of the time.
@stonetowergrafix99262 жыл бұрын
Recently purchased a Merrow M 3Dw. It’s the grey colored machine. Can I get the same border as a MG 3U for patches with this machine?
@sebastienrouseau1623
2 жыл бұрын
Asking myself the same question … i have Mg 3Dw 7… I read that we can get the same result by removing cutter optional, lowering feed dogs and changing cam to a 20 … all mods being dearly easy to do
@JanetDiaz61522 жыл бұрын
Hi, I have a merrow M -3DU… needs oil. I read spindle oil of 32 cst @40 Cel can you tell which one ?
@EmbroideryNerd
Жыл бұрын
We both (Jeff and Matt) run AW46 oil in our machines. amzn.to/3exN9Wj
@theemacguy2 ай бұрын
Is it all 40wt you use ? I’m having issues with my lower looper where the thread is getting tangle before it reaches the tension disc 😢
@EmbroideryNerd
2 ай бұрын
I started buying either 300/4 or 400/3 thread (can't remember which it is) for my common colors. What I have done for tangle control, is I put all the spools on the table and when they are connected, I shuffle the spools around to pre-twist them.
@JHorvathCinema3 жыл бұрын
What size cam are using?
@EmbroideryNerd
3 жыл бұрын
I am using a #28. I started with a #14 and it was not dense enough. Part number from Merrow is: 6-82-28
@bgnarly71822 жыл бұрын
What other machines can do a merrow stitch? Can a serger do it?
@EmbroideryNerd
Жыл бұрын
There are a few people that have gotten the Brother 1030 serger to work, but it requires doing a satin border first to get the loft and density.
@diewerbepalette9261 Жыл бұрын
Hello, what a kind a needle you work? can you sent me the specification? best regards from Germany
@EmbroideryNerd
Жыл бұрын
The Needle is a 4DB.
@michaelbusto93303 жыл бұрын
any video on how to thread a merrow m-4d-45 ?
@EmbroideryNerd
3 жыл бұрын
We don't have one in our workplaces, so unfortunately we can't make a video. Unless if Merrow wanted to send one *nudge*
@eddiejr4 жыл бұрын
please upload more merrow vids. thanks!
@xjayrockx101
4 жыл бұрын
+1
@EmbroideryNerd
3 жыл бұрын
Great news Everyone! We're uploading one right now. Check back soon for it.
@ivviiii74083 жыл бұрын
do you offer this service? if so please let me know we are looking for someone to do some pieces for our clothing line
@EmbroideryNerd
3 жыл бұрын
We don't at this time, sorry.
@nildinmcmanus84212 жыл бұрын
How to treating a merrow machine model 60WD
@EmbroideryNerd
Жыл бұрын
None of us here have one, so unfortunately we can't offer any video guides on it.
@joycelockyer11734 жыл бұрын
Please do a how to change the needle video !
@xjayrockx101
4 жыл бұрын
+1
@EmbroideryNerd
3 жыл бұрын
Are you referring to the curved needle?
@Ambareesha8gmailcom3 жыл бұрын
It's urgent I need 3 matchine ok
@EmbroideryNerd
3 жыл бұрын
We don't actually sell merrow machines. We just try to teach people how to use them. If you would like to purchase one I'd recommend contacting merrow directly at merrow.com to find a dealer.
Пікірлер: 41
Omg! You saved me. I was able to rethread the merrow machine at my job!!!❤❤❤❤
@EmbroideryNerd
Жыл бұрын
Glad I could help!
Wow - great video - really appreciate it.
Thank you so much! Best vid on threading these beasts that I've come across. I found quite a few errors in my own threading system, which having watched yours, explains a lot of botched attempts.
@EmbroideryNerd
3 жыл бұрын
When we started we had no training. Ours came from a craigslist sale so it wasn't threaded and had the wrong cam in. We spent just over a year trying to match typical merrowed patches. After all that frustration and seeing so many MG-3Us ending up on the chopping block we knew we had to make a video. That's what Nerds do, we try to help.
Great video!
@EmbroideryNerd
3 жыл бұрын
Thanks!, We're glad you enjoyed it.
hello i bought a new Merrow but the instructions on how to connect it to the sewing table(Helmsman) are pretty much non-existent. do you have any pointers or tutorials?
Good video thanks
@EmbroideryNerd
Жыл бұрын
You're welcome! We'll be uploading more videos soon with the merrow.
Thank you :]
@EmbroideryNerd
3 жыл бұрын
No problem!
What is the best tension for all threads, when you are usin 5 Threads for the upper looper???? Are you usind needle 110 metric??? What number of cam are you using. I use Merrow floss an 40 cam but I wanna give anothe possibility a chance, because everytime I need to buy a Merrow floss cone wit 5000 yrds and sometimes I only need not so much for a red, yellow or green border.
@EmbroideryNerd
3 жыл бұрын
We're uploading a video right now that discusses a small portion of the tensions. But on ours we have the Needle thread tight, the upper looper is very loose, and the lower looper is very tight. We have both a #14 and a #28 cam for ours, but only use the #28 for patches. It came with the #14 so we had to get the #28 for the patch border. For needles we use 4BD-Titanium needles ordered directly from Merrow. We don't like spending lots of money on floss for every color we needed. That's why we spent the time to find the standard embroidery threads that work on the merrow machines, and that's what we use 90% of the time.
Recently purchased a Merrow M 3Dw. It’s the grey colored machine. Can I get the same border as a MG 3U for patches with this machine?
@sebastienrouseau1623
2 жыл бұрын
Asking myself the same question … i have Mg 3Dw 7… I read that we can get the same result by removing cutter optional, lowering feed dogs and changing cam to a 20 … all mods being dearly easy to do
Hi, I have a merrow M -3DU… needs oil. I read spindle oil of 32 cst @40 Cel can you tell which one ?
@EmbroideryNerd
Жыл бұрын
We both (Jeff and Matt) run AW46 oil in our machines. amzn.to/3exN9Wj
Is it all 40wt you use ? I’m having issues with my lower looper where the thread is getting tangle before it reaches the tension disc 😢
@EmbroideryNerd
2 ай бұрын
I started buying either 300/4 or 400/3 thread (can't remember which it is) for my common colors. What I have done for tangle control, is I put all the spools on the table and when they are connected, I shuffle the spools around to pre-twist them.
What size cam are using?
@EmbroideryNerd
3 жыл бұрын
I am using a #28. I started with a #14 and it was not dense enough. Part number from Merrow is: 6-82-28
What other machines can do a merrow stitch? Can a serger do it?
@EmbroideryNerd
Жыл бұрын
There are a few people that have gotten the Brother 1030 serger to work, but it requires doing a satin border first to get the loft and density.
Hello, what a kind a needle you work? can you sent me the specification? best regards from Germany
@EmbroideryNerd
Жыл бұрын
The Needle is a 4DB.
any video on how to thread a merrow m-4d-45 ?
@EmbroideryNerd
3 жыл бұрын
We don't have one in our workplaces, so unfortunately we can't make a video. Unless if Merrow wanted to send one *nudge*
please upload more merrow vids. thanks!
@xjayrockx101
4 жыл бұрын
+1
@EmbroideryNerd
3 жыл бұрын
Great news Everyone! We're uploading one right now. Check back soon for it.
do you offer this service? if so please let me know we are looking for someone to do some pieces for our clothing line
@EmbroideryNerd
3 жыл бұрын
We don't at this time, sorry.
How to treating a merrow machine model 60WD
@EmbroideryNerd
Жыл бұрын
None of us here have one, so unfortunately we can't offer any video guides on it.
Please do a how to change the needle video !
@xjayrockx101
4 жыл бұрын
+1
@EmbroideryNerd
3 жыл бұрын
Are you referring to the curved needle?
It's urgent I need 3 matchine ok
@EmbroideryNerd
3 жыл бұрын
We don't actually sell merrow machines. We just try to teach people how to use them. If you would like to purchase one I'd recommend contacting merrow directly at merrow.com to find a dealer.