Thompson Submachine Gun: Principles of Operation 1943 Restored
A thorough explanation of the inner workings of the Thompson delivered through a live tear down, with supplemental animation. You’ll learn how all the parts function together in this very innovative design.From the definitive film series on the Thompson produced by the Army Signal Corps in 1942-43 to train troops in the use of this outstanding weapon.
See this film & five more on our "Mastering the Thompson Submachine Gun" DVD bit.ly/OEg9DZ
Zeno
Zeno's Warbird Videos www.zenoswarbirdvideos.com
Zeno's Flight Shop DVD Store - World's Largest Collection of WW2 Videos
www.zenosflightshop.com
Пікірлер: 119
"A reliable friend in a tough spot". That's what we all need.
My father a WW2 combat veteran fought thru Belgium and Germany in 44 and 45, and apparently much of their fighting was house to house in small villages. They would breach a basement in the first house and sweep the buildings attached and work their way down the street going thru basement walls . Anyway he said thompsons were a favorite in that close combat, BUT he said he rarely saw a thompson with a stock attached, as the GIs would cut, break off or remove the stock so it could be swung quickly to either side in close quarters
You know when it starts with that same 1940s orchestra its gonna be good.
I'm just fascinated by gun mechanisms
John Thompson a genius. As good as Browning. To think that 102 years ago he mastered the gas pressures, metallurgy, timings, ballistics, to make this work.
@ravener96
Жыл бұрын
In what world is he in the same league as browning? The metalurgy and understanding of pressures was not new in any way. People had been making guns for centuries at that point. The blish lock he used is also more or less based on a misunderstanding of materials science, proving you dont actually have to understand all that much to make a gun work if you allow for some to blow up while you tweak it.
Very interesting bit about the magazine trip at 15:31. Had no idea the bolt stayed open on a Thompson only when you used the box magazines. One less step on not needing to cock the bolt back must have been useful in combat.
@seijiroukikuoka5975
Жыл бұрын
The Thompson was ahead of its own time. It's superior to literally all other SMGs of the era, but hey, simps are gonna simps, and the grass somehow is greener on the enemies' side.
@hoffmiermp
Жыл бұрын
The Tommy gun is a brilliant design, but the StG 44 was light years ahead of its time imo.
What a simple but yet complicated weapon. I can see why these things were pricey to manufacture. Cool video.
@kovona
5 жыл бұрын
They realized the over-complicated Bliss locking system didn't do much, which resulted in the simplified M1 and M1A1 Thompson blowback-only variants being produced after 1943. Production time was cut in have, and cost for each gun went from $210 to $70.
@enscroggs
3 жыл бұрын
@@kovona Blish
@grantmartin1852
2 жыл бұрын
@@kovona Prior to this video, I was only familiar with the M1A1 variant - the "Slam Fire" model. I was very surprised to learn how its predecessor was constructed and operated!
@pimpompoom93726
Жыл бұрын
@@kovona Actually they got the price down to $ 45/unit late in the war. Still not cheap compared to stamped metal SMG's, but reasonable.
@seijiroukikuoka5975
Жыл бұрын
They didn't have the technology we have nowadays. Today, a CNC machine operation isn't that expensive, 7075 aluminum is cheaper than heavy steel, and thus, if a Thompson was to be mass-produced today, it would probably be as cheap as an M4 carbine.
These films are fascinating. Thank you Zeno Warbirds!
1:51 "Simple and light"... there ya go... Sarcasm 1943 style...
@TedBronson1918
6 жыл бұрын
Onyx - No kidding ! When I was in the Army I had the opportunity to fire a Thompson. My normal weapons were the M-14, or the M-60 machine gun in the field. I was surprised by the weight of the Thompson (heavy) for as small as it was. Not only that it felt solid, more than a bunch of parts put together. This was done at the FBI range under their HQ in Washington, which they had allowed us to use for our .45 qualification (back then machine gunners carried .45's too). The armorer brought out a rolling cart full of various weapons and some ammo, and we had a blast trying them out. My favorite was the Thompson. The BAR kicked ass too. It was definitely one of the funnest days I spent in the Army.
The "trip" is the single most ingenious feature of any open-bolt submachine gun, no fumbling with the charging handle every time you change magazines! This is a considerable advantage over designs like the MP5 which must be charged every single time the magazine runs dry.
@arthurserino2254
7 жыл бұрын
Sam Percy It offers no safety at all.
Like what you see? Your DVD purchases at our store make this channel possible. www.zenosflightshop.com Get this film & five more on our "Mastering the Thompson Submachine Gun" DVD bit.ly/OEg9DZ We need your support! Zeno
It’s a dream of mine to own one. My great grandfather carried one, and I’ve been infatuated with them ever since I’ve seen one.
@henryq9390
5 жыл бұрын
inevitable tragedy make a non auto look alike only way to get on
All submachineguns and present day service rifles involves the recoil spring,drive spring,or buffer derives its power from the rear to the front.Some systems like the M1 Garand,M1 Carbine,and M14 Rifle uses the spring on the front.It is still used today as the most efficient means of recycling the energy of recoil and gas of the firearm to cycle properly.
Thats why was so costly and was replaced by M3 submachine gun. By the way... spectacular video. Thanks 4 share
@redtra236
4 ай бұрын
That's not true the M3 didn't replace it
brilliant well done
And that's why the m3a1 came around.
@darnit1944
5 жыл бұрын
I think the M3 was created since it was cheaper
@DaddyLongLegs44
5 жыл бұрын
@@darnit1944 correct.
WOW! WOW!!
Awesome!
there is some video that explains about this, the angle of the chamber?
it seems that there is a conical angle in the chamber where the cartridge bursts, and it seems that the Anglo from the middle to the end is beginning to end, am I right?
awesome
So when did they figure out that the blish principle wasn’t actually a thing and that this was basically a delayed blowback gun helped by mechanical disadvantage of the “locking” lug working at a significant angle?
Anyone know the name of the Lieutenant who appears in this video. Seems he is in just about every Army gun video made during that time. Would be interesting to find out what he did during the war.
Would it be all right if I used parts of this video in a sereis I'm making?
Bronze does not stick to steel!
Sweet
It appears that Blish observed the effect in heavy naval guns.As you say, it probably has no measurable effect in small arms calibrated.
@alaskanbullworm5500
8 жыл бұрын
+webtoedman it was essentially a glorified delayed blowback
@geodes4762
3 жыл бұрын
Really makes one wonder about the necessity of this complicated part of the gun! The Sten and many other SMGs including the M1A1 Thompson that replaced the M1928 did not have any locking devices such as the Blish lock and performed quite well. Sounds like the Blish lock in this application was simply a lot of “hype” and included because it simply was a principle looking for some kind of application that was really not needed. Would be interesting to talk to people who used both the M1928 and the M1A1 and find out if they experienced any noticeable difference in gas blowback with the M1A1 version.
@seijiroukikuoka5975
Жыл бұрын
@@geodes4762 the M1A1 can definitely jerk itself around a lot when fired, whereas the earlier versions were reported to be very smooth shooting, no matter the amount of rounds. The compensator also lessened the recoil significantly. M1921 can even achieve up to 900 rounds per minute rate of fire.
This is the early model that uses the Blish hesitation lock. They deleted it and converted the gun to straight blowback, because it took too long to make in it's original form.
@bottomshot
8 жыл бұрын
+webtoedman there is some debate whether the Blish principle even exists. The fact that the M1/M1A1 functions without it clearly points in that direction, at least with the standard service 45ACP cartridge. I read reading an article of an informal experiment where a 1921 or 1928 Thompson was made to function with its Blish lock deactivated. They simply milled the ears off and re-inserted it, all to no ill effect.
@markroe9529
6 жыл бұрын
Some British armorers removed the lock completely and held the bolt and actuator together with a screw and hex nut and the guns functioned flawlessly
@astragreen
3 жыл бұрын
No need for it the British sten gun didn’t use one
@vikkimcdonough6153
2 жыл бұрын
@@bottomshot It's actually since been proven that the Blish system doesn't work at all at the chamber pressures you get from small-arms ammo (artillery, which inspired Blish in the first place, is another matter entirely). The lock on the M1921/M1928/M1928A1 did delay the opening of the bolt slightly, but this was solely due to the mechanical disadvantage from forcing the lock ears up that steep ramp, and didn't involve any sort of stiction.
"The gun is simple, light flexible" LIAR
@earlborchardt4358
4 жыл бұрын
This is why they came up with the M-3
@1967buickriviera
4 жыл бұрын
No soldier wants to hear "HEAVY, HARD AND DIFFICULT TO UNDERSTAND"
this makes me want to skeletonize one of these
Can someone explain 9:13 please? Does the top of the magazine act as the ejector?
@stevegarroutte8947
6 жыл бұрын
no there is a ejector that is screwed into the left side of the receiver over the mag slightly behind
@markmiller9321
Жыл бұрын
The ejector is in the side of the receiver. It is not shown in the diagram. That mark shows where it is.
i would love to have one. or two.
Linda armas
Al Capone approves of this video!
Too expensive for law enforcement but cost no obstacle for a bootlegger/enforcer. The Lincoln jeep had a humidor and a drinks cabinet for the cost of two of these. The liberty ship men could have cranked them out at 1/10 cost and 100 times faster. What a waste of effort unless you have co-respondent shoes and a fedora. Makes you THE man.
Light is not the right word for a the Thompson. 4.8 KG (unloaded). That's heavier than a full-wood standard issue M1 Garand and a Milled RPK-74. But I guess that since this has a lot to do with morale, propaganda was an important tool back then just as much as it is today.
@General_Eisenhower1945
6 жыл бұрын
HecklerRommel I mean it's lighter than a .50 cal or a BAR
@General_Eisenhower1945
6 жыл бұрын
Eric Sales I won't argue that, but I do believe it's an older design. I think
@frostedflakes.08
3 жыл бұрын
Heckler tfbtv
@steveb6103
3 жыл бұрын
Lite power- pistol caliber 45 APC. Remember that the 30 Caliber MG.was also called lite. Witch ment it could be carried by hand.
@grantmartin1852
2 жыл бұрын
On the flip side, that extra weight reduces felt recoil substantially. Watch how little that shooter moves when the gun is fired. In full auto, it helps reduce muzzle climb thus keeping the gun on target. There is an advantage there.
A very space age looking weapon even for it's time. Looks like a ray gun.
@Pynaegan
3 жыл бұрын
It does have that "Buck Rogers" feel doesn't it?
@NFLYoungBoy223
2 жыл бұрын
🥰
In the first minute... The finger inside trigger guard.
@ramiroisram
8 жыл бұрын
its completely unloaded and for demonstration purposes, chill out an unloaded gun can't shoot.
@markroe9529
6 жыл бұрын
It was also the way things were in that time period. Finger off the trigger wasn't a rule then.
@KidTonyGaming
6 жыл бұрын
Mark Roe especially when you're neighbor's a commie you gotta be ready at all times
@seijiroukikuoka5975
Жыл бұрын
@@markroe9529 Oh no, trigger discipline and muzzle courtesy was still super high those days. Remember when Gunny Haney tossed a chunk of coral at the derp butter bar in Eugene Sledge's account of his time in the Pacific theater? It's just these guys are actors and don't know shit about guns. You think these are real GIs?
Light...yeah it's fukin 4.5kg unless mag
It seems strange that bronze was strong enough for the locking lug.
@grantmartin1852
2 жыл бұрын
Yeah! I was surprised at how they used a property of dissimilar metals there.
@redtra236
4 ай бұрын
@@grantmartin1852 This is the M1928A1, I believe the M1 and M1A1 thompson did away with the blish lock since it didn't really do much
@peghead
4 ай бұрын
Bronze; about 90% copper and About 10% tin; Brass; about 90% copper and about 10% zinc.
Captain John H Miller approves of this video.
To think this was the bloodiest war in history
Why in the heck would I ever need to know this
I wanted to see the animation go full auto.
ดีๆๆ
sterling, sten, M3, Thompson. smart people...
simple.... ok....... light... ha!....
@frankpienkosky5688
6 жыл бұрын
with a 50 rd drum this gun doesn't move...you could even write your name with it!
@daimyosamabraga4230
5 жыл бұрын
@@frankpienkosky5688 I'm reading everyone saying it but by the time was not in comparison with other submachine guns?
Anyone know if the m1a1 functions the same way?
@markroe9529
6 жыл бұрын
The frames are nearly identical, some small differences in exterior shape. The M1/M1A1 does not have a blish lock. Otherwise they operate in the same manner
@seijiroukikuoka5975
Жыл бұрын
@@markroe9529 the M1 still has an internal hammer and spring-loaded firing pin, which is less prone to breakage under higher round count than the M1A1, and if did break, would be easier to replace and less wasting than replacing the whole bolt body assembly.
@markroe9529
Жыл бұрын
@@seijiroukikuoka5975 I know it does.
@redtra236
4 ай бұрын
M1A1 doesn't have the blish lock and cant accept the drum mag either, main thing is the M1A1 has a fixed firing pin though
The ole Chicago typewriter
Sir this my "pibirate,,gun thonson",
XD they also explain the stupid blish lock. Dont beliefe them! Different metals do not stick together under high pressure. That is physicalli impossible. They were just plain stupid and put an unnessesary thing in a blow back gun.
@daimyosamabraga4230
5 жыл бұрын
That part made stop quite a while. Maybe I didn't understand. I even turned on the caption. I was really confused by this nonsense.
I so badly want to build wooden replica of this gun but I need measurements and on top of that i need them in milimeters.
@nybergsgarage
5 жыл бұрын
I've made three full auto rubber band thompsons, which are almost exactly like the real one. You don't really need measurements.
Mr.Al Cqpone.#1929.
Het eerste wetenschappelijke beroep is militair
👍🔫🇺🇸😀🆒
Now wheres my Apple pie and hotdog with curly fries and milkshake float?
this thing is way to complicated. no wonder it was so expensive to produce.
first i think that is toy comersial 💀
The M1A1 is complete garbage compared to the M1928A1. This is what the Thompson should always look like. Not that trash US Ordinance forced upon AO and Savage
@wesleyroberts7119
3 жыл бұрын
It depends on your purpose. The m1a1 is much more easy to make, cheaper, and for practical purposes works just as well. So, the m1a1 is better if your purpose is to get as many into the hands of people as possible. The m1928a1 is much more elegant and has fancier features. So if your goal is to have it look nice and shoot smooth/ accurate as possible then it's the better pick.
@seijiroukikuoka5975
Жыл бұрын
@@wesleyroberts7119 No, the M1A1 is even dumber in that the firing pin is simply machined into the bolt face. The M1 still has a hammer and spring-loaded firing pin, at least, which you can replace with less wastage, and even then, under heavy firing schedule, is less likely to break.
Never owned a Thompson, so I found it unique how the hammer works.
@redtra236
4 ай бұрын
Important to note that the later M1A1 thompson doesn't have the hammer like that, instead it has a fixed firing pin on the bolt face. It also doesn't have the blish lock