Hey everyone. Thanks for watching. Hopefully this video has much better audio, I think the issues are finally fixed 🥳

@Permabull_Moonman

2 жыл бұрын

Your issues will never be fixed! Brush your teeth and swallow your masters last load. Then maybe your mumbling will become coherent.

@gainmaster1

2 жыл бұрын

Nice video, whats your background in electronics or are you self taught?

@freethenorth7583

2 жыл бұрын

Awesome, much better. Great vid.

@TheCod3r

2 жыл бұрын

@@gainmaster1 I'm self taught mate, not got any formal training at all 😁

@stevencuellarart9495

2 жыл бұрын

Awesome!

Man.. I'm jealous of your diagnostic capabilities. You make everything look so easy with that thermal camera and knowing which component to pull off in 1 hit.

@TheCod3r

2 жыл бұрын

Thanks mate. A lot of it comes down to just stopping for a second and slowing it down a little bit. A little common sense can go far sometimes lol

Congrats at 50k subs keep pushing bro 100k here you come

@TheCod3r

2 жыл бұрын

Thanks man, much appreciated

It's about time you worked on an OG, I'm always happy to see people repairing these.

@TheCod3r

2 жыл бұрын

Yep I do quite enjoy these. Nice and easy to disassemble and fun to work on

A miracle worker at work again.

Yet another fantastic video Phil thanks mate

This was incredible, you are an inspiration fella

I have to admit. That was awesome. That tiny cap was the whole problem. Needle in a haystack issue. Very good job my friend 👍👏

Good job. A real skill you have there!

Nice fix Phil 🤘 also congrats on 50k subs 😃

@TheCod3r

2 жыл бұрын

Thank you bud much appreciated

hi Phil congrats on the 50k subs keep on grinding 💪

@TheCod3r

2 жыл бұрын

Thanks buddy much appreciated

Well done, nice to see how you are working your way to the possible solutions. Thanks for having us!

@TheCod3r

2 жыл бұрын

Thanks bud, yeah this wasn't the most interesting repair but I felt it had some good fault finding info in there

I’m a new subscriber and I love these videos. Great content, very educational and the Cod3r is an inspiration to all

@TheCod3r

2 жыл бұрын

Thanks man much appreciated

@investinggenius3728

2 жыл бұрын

@@TheCod3r thank you mate! I’m very new to this world and just learning from you!

Clever lad, well done. Very interesting video, too much for me to do, but thoroughly enjoyed seeing your analysis and process.🍷

Very intelligent repair 👏

Just had the same problem, Xbox not powering on, watched your video, removed the same capacitor, but didn't replace it, Xbox now works fine,, thanks very much for your video

In gods name, can't you let those XB1's just die ;) Great video fella.

@TheCod3r

2 жыл бұрын

Haha thanks mate

Very good and knowledgeable video bro! I appreciate the service you give to the tech repair community!

@TheCod3r

2 жыл бұрын

Thank you bud, much appreciated 🙏

Great video mate 👏👍🏻great fix

Love watching these .

Awesome job - Kudos mate!

Fantastic. From South Africa. Blady marvelous. The help was the voltage rails. Please zoom in on the points of testing.

Congrats on fix

Dude these are the absolute best kind of repairs. I love when you can just inject voltage with a thermal cam, use some ipa and find the fault. Fantastic job. Good video!

@TheCod3r

2 жыл бұрын

Thanks buddy, Wayne and I were just talking about you, I didn't even know you made videos. I'll check them out today 😁

@chasefournier

2 жыл бұрын

@@TheCod3r Definitely!! Thanks man! Wayne is fantastic!! Microsoldering is my life!

Old xbox ones are solid. Mines still working with no issues

Awesome stuff as always

@TheCod3r just wanted to say thanks for this, had exact same issue, no power, no 5v. Injected 3v on the 5v pad,. Havent taken the dive on a thermal cam yet but tried my luck with touch. Couldnt find a thing and was about to give up, when the underside of the board near the top usb slot felt warm, was pulling 3a @3v (my psu wont draw more than 1a at 1v need a better one) did an isopropyl test and found the C3F3 cap was burning up. Fiddly to remove due to proximity to socket but Kapton tape did its job. Replaced from a donor and presto, booting. Was then a bit of a faff as the drive was, maybe coincidentally? dying? Anyway had to try a few diff drives with fresh partition tables but eventually OSU1 took and Xbox was resurrected. Thank you for taking the time to make such clear videos.

one less item to landfill, awesome work.

Great video 📹 👍 congrats on 50k so glad to help get you there mate 👍 😀 👏....so enjoy your videos 📹 😀 please keep them coming 🙏 👍 and here to help get your videos 📹 😉 out to everyone to enjoy 😉 😀 cheers buddy 😀 👍

@TheCod3r

2 жыл бұрын

Thank you bud, I truly appreciate it

I keep thinking your black chair with blue is Darth Vader lol

@TheCod3r

2 жыл бұрын

😂😂😂

What a genius great job as always👍

Good job Sir ! 😊

Great video. Loved seeing someone else use the ol I'm just gonna put my finger on it to see if it's hot method. You've inspired me to buy a cheap Xbox and attempt to fix it.

Thanks for great video. Have similar situation. Mine just plays the turn on sound and and power goes off in a second .... will try the same cap.

Nice job phil👍 got there in the end big man 💚

@TheCod3r

2 жыл бұрын

Thanks buddy much appreciated

@u4ia_fubar_75

2 жыл бұрын

@@TheCod3r had to edit my comment, didnt realise I called you phile🤣

Well better than usual

Nice fix once again

You are an absolute legend, how you manage to turn things around and get working, I wish I had the dexterity to do the stuff you do! 😁

@TheCod3r

2 жыл бұрын

Thanks bud, much appreciated 🙏 it's not too difficult if you practice, definitely possible for you to do it 😁

Awesome sir thank you very much

Excellent video. 10/10

Hi and thank you for your great videos. I have a similar problem where I also get no image. When I measure the gates of those MOSFETs like you did (diode mode with red on the ground) I get a reading of 820ohms, not volts. I have also realised that the three (starting from the right) smd caps above these MOSFETs have a short but none of them look bad. sadly I have no linear power supply or thermal camera. any tips would be greatly appreciated.

great repairs as normal

Fair play mate, you got some skills gret channel also well done

@TheCod3r

2 жыл бұрын

Thanks buddy much appreciated

Wow amazing vid bro find the problem Nicely

great vid m8

That was awesome. I never cease to be amazed by size of modern components, even on the macro-cam I couldn’t see it !

@TheCod3r

2 жыл бұрын

Thanks mate. Yeah those components are tiny. To be honest I can see them just fine without the scope but I have to use it for videos lol

One tiny capacitor. Even that, The Cod3r find the little bastard. Amazing job

@TheCod3r

2 жыл бұрын

Haha thanks mate, there's no hiding in this world 🤪

Great job!!

Hello, I've got an arctis 9x headset with black spots in the sound when turning the volume wheel, do you do repairs on things like this?

nice one mate

Great video

Love your videos, very well done. Looks like I’ve got an issue with my 5v rail. Excellent content, please keep making them.

What’s the part # of the 1R00 resistor right next to the mosfet?

Where are you touching to test 12v at 8:16? My board seems to be slightly different as I do not have a 5p0 test label. I did get 3.3v, 1.8v, 3.3v standby, and 5v readings near where you tested. I have not found the 12v and this is a no power no beeps XBox. The mosfets all show ~0.6

Love your videos can you make one how how to inject voltage if there's already one please someone share thr link

Nice going Phil 👌 I had the exact same fix a couple of months ago but it was the cap behind the side usb. So I'm thinking you nicked my idea on fixing it 😆 🤣

@TheCod3r

2 жыл бұрын

Haha you don't have ideas do you? I thought your mind was too old to process them 😂

Hi, How I can activate 12V without connection to the console? I wont use this power brick to the other needs. Thank You.

Nice work! and a multimeter that's camera friendly! 😄

@TheCod3r

2 жыл бұрын

Haha thanks mate

Where do you find that part

Great job! Long time i haven't seen you use the thermal cam and the isopropyl. However I'll like to see you reball a PS4 APU with the blod.

@TheCod3r

2 жыл бұрын

Thanks mate. I do have a few BLOD consoles in the queue :)

Top quality fault finding and repair job again, Phil. I've not long done surgery on a PS4 Pro m/board with a fully lifted power supply cable socket that came clean off the board whilst gently trying to remove the cable. The PS4 is all back up and working flawless now but i love any excuse to break out my soldering gear and multimeter :)

@TheCod3r

2 жыл бұрын

Thanks bud, awesome stuff. Always a great feeling to see them work again

Hey I just got a kinect v2 and it will not power on. HELP!

Like your haircut, looks good!

@TheCod3r

2 жыл бұрын

Haha thanks mate, feels good to get the time to go and get a trim

Very nice fix again Phil. I love to way you check and explain what your doing and why. I was wondering if you don't have a donerboard how will you know which caps to buy? What values etc. Keep up the great content always very nice to watch and yes the sound is even better now. 👍

@TheCod3r

2 жыл бұрын

Thanks mate. I think that's where the community comes in, where we just have to ask and hope 😀

@TheCod3r

2 жыл бұрын

Thanks mate. I think that's where the community comes in, where we just have to ask and hope 😀

I have a similar Xbox. IT turns own but I am not getting no visual. The hdmi port is not damage or have any debri. What do you think it can be? Are you open to me sending it to you to repair?

Didn't know u got jail for video copying. U done realy well arfter that .keep up the good work

Man I need this dun to mine

Where can I send you my xbox to get fixed

What did you use to inject the voltage? The multimeter?

@TheCod3r

2 жыл бұрын

No mate I used a bench power supply. I have the Rockseed RS305P bench supply

Tryed you on Facebook as well mate

Wow, some of the stuff you talk about is witchcraft to me, but I love these vids and your process of elimination!! Love it

@TheCod3r

2 жыл бұрын

Haha thanks mate

DAMN DUDE! what a fucking badass you are man.

hi how you doing can you let me know where can I get this camera 📷 thanks

@TheCod3r

2 жыл бұрын

Yeah I bought mine from amazon :) www.amazon.co.uk/dp/B0728C7KNC

Another great save Phil, really is silly why people send these systems to the tip for such an easy fix.

@TheCod3r

2 жыл бұрын

Thanks mate. Yeah, the problem is not enough people take the time to attempt to fix them

I've 2 xb1 controllers that only work when I put a plug in them any help would be great

@TheCod3r

2 жыл бұрын

You're best to ask on discord for that mate because I don't really work on controllers, so I don't know enough to assist, but there's loads of people on discord who fix them every day

great!!!

This is happening on my xbox one, can you help to repair mine??

Filter cap shorting to ground seems rare but there it was. Nice fix and as you said removing it without replacement would be fine as there are plenty of others to pull noise off the power line.

@TheCod3r

2 жыл бұрын

Yeah it's very rare to have such a simple thing going wrong. If I'm honest I'd have probably just left it if I wasn't filming but I wanted to show how to do it 100% lol

thecod3r replace ps4 pro thermal paste but couldn't clean stock paste from apu capacitors, will it cause any long term damage? thanks

@TheCod3r

2 жыл бұрын

No mate it won't hurt at all. I just clean it to be thorough but it's fine to leave it, just clean around the die and it's fine

@nizamul84

2 жыл бұрын

@@TheCod3r thanks for replying,couldn't clean it all off

ABOUT TIME YOU HAD A Hair cut

Sunday weather in the uk has been beautiful today and now your giving me dirty flashbacks with an xbox one do you know what happened to mine it bricked...I tried in vain to get it fixed but alas i traded it in for an xbox one S and the download time for games was still shocking!!🤨

@TheCod3r

2 жыл бұрын

Oops sorry lol. To be fair I've never had an issue with download speeds but I use an ethernet on a gigabit connection so that could be why

Hey phil, my xbox one has the same issue, how much did this repair cost?

@TheCod3r

2 жыл бұрын

For this I charged my minimum bench fee of £40 mate. It depends though and varies between £40-£60 depending on the exact cause as no 2 consoles are exactly the same to be honest

@adamskinnyman5851

2 жыл бұрын

@@TheCod3r Well after payday ill get in touch on the website and get it sent to you. Itd be an honour

Hi Phil the shematic exist for this type of console. If you want i can sent it. Good work by the way.

@TheCod3r

2 жыл бұрын

Hey mate, yeah I'd be happy to receive it 😀

@stevedebeukelaer1424

2 жыл бұрын

@@TheCod3r ok which email adress i may sent it to you

Bro i have a nintendo switch for sale if youre intrested. my grandkids keep playing with the charger plugged in and keep loosening the usb port. thats litraly only thing wrong with it. Do you buy these?

@TheCod3r

2 жыл бұрын

I do buy them mate, depending what you wanted for it

@Battl3field

2 жыл бұрын

@@TheCod3r weird i thought i replied to this. i want 15 quid but the right side controller is missing. it just has the left side. Theres also a docking station for TV

Hi Cod3r, i have linked my amazon account on twitch but i don't see a free subscription option. Any pointers for a twitch noob?

@TheCod3r

2 жыл бұрын

Hey mate. Firstly thank you 😊 if you go back onto my channel you can click the subscribe button and it'll give you the option to use amazon prime

@dml1970

2 жыл бұрын

@@TheCod3r Thanks mate all done. easy when you know how lol.

Mine makes the turning on ding and ejecting ding but it doesn’t turn on , and it shut off loading up a game

Did i miss when you put thermal paste on?

@TheCod3r

2 жыл бұрын

It's in there mate, right as I cleaned the fan 😉

Shouldn’t you put a new thermal paste after you opened the console?

@TheCod3r

2 жыл бұрын

I did mate 21:42

I have three Xbox one consuls and one call of duty advanced war fighter limited edition Consol in perfect condition

I had this problem found out it was a blown capacitor in power supply

Which Thermal Cam would you recommend?

@555geoneo555

2 жыл бұрын

I think the one he's using 🤔

@TheCod3r

2 жыл бұрын

The only one I've tried is the Flir One but I've heard from others that the Seek is good

I have got 2 PS4 motherboard with 2 seconds blue light ..blown caps I don’t know where to get them

@TheCod3r

2 жыл бұрын

I generally use donor boards but if you come over to discord you can post some pics and I'll get readings on what caps they are :)

@REMEDY-REPAIRS

2 жыл бұрын

@@TheCod3r thanks man I will 👍🏾

👍👍👍

As i write this comment, louis rossman is live and you're not in his chat, what is going on!??!?? :)

@TheCod3r

2 жыл бұрын

Haha I was dealing with some admin stuff

Mate I bet it cost alot ship a Xbox one s to you from USA 😭 not sure what you charge think my HDMI driver cheap out been freezing up alot lately have restart it now has no video did try out new paste on heat sink that thinking that was issue out of warranty 😭and still out work buy the brand new one

Lays motherboard onto metal and screws

I dont know how people break their consoles i use mine for tons of years and never break, i still use my n64, snes or my gameboy advance sp, the 3ds and ds also but those are newer, my switch obviusly does not break couse it has 4 years and its mint, and i have used it thousands of hours, i think i treat very well my devices

@TheCod3r

2 жыл бұрын

I'd say this one just randomly died to be honest

A og black box worth lot off money to the right people They give some wonky leaderboards times on forza that’s can’t be hit on other varents off the console Like the slim or the one X

u were using hot air next to that big black capacitor it could blow up

@TheCod3r

2 жыл бұрын

That just makes for funnier content dude. If that cap blew up I'd have probably fell off my chair with laughter

@ghostbiker7391

2 жыл бұрын

@@TheCod3r so it's not true what they say that it will blow if it got hot

@TheCod3r

2 жыл бұрын

@@ghostbiker7391 it would if you don't control your airflow properly yeah, but that's why I use angled Nozzles and hold my hot air on very specific angles to prevent that from happening. That said, if it did happen (it has before) it's not going to hurt anything, it just makes a mess and you just replace the damaged cap

I might need yhu 😩💔🎮..