This Spray Coating Can Be Applied In Direct Sunlight! Blue Collar 2 Polysilazane One Year Coating!
Blue Collar 2 is designed to be a very quick and relatively easy short term coating that you can simply mist or spray to apply. Its made up of polysilazane and offers some durability boosts to painted surfaces ( 5H ) , UV protection, as well as a significant boost to shine and gloss.
The best way to apply Blue Collar 2 is to spray into a damp microfiber towel and buff out paint in a 3x3 section, then follow up with a dry microfiber towel and wipe away all the excess coating till its completely invisible and move onto the next panel. Let cure minimum of 4 hr. Keep out of rain and free flowing water until cured. Top with Blue Collar 3 and enjoy!!
Blue Collar 2.......apexsurfacepro...
Hydrophobicity
Shine and gloss boost
UV Protection
Hardness of 5H
Quicker application
Easier to wipe away
Can be layered
Year long durability
Chemical resistance
Protect your beloved ride at Apex Detail. Ceramic Coating near me. Our Polysilazane coating has insane gloss! Benefits compared to other coatings on the market....
Better Heat resistance
Better Chemical resistance
Better Gloss level
Better Water contact angle
Better Durability
Better Adhesion and cross-linking
With a higher temperature, abrasion, contact threshold, along with chemical resistance and the ability to deal with extreme heat, our coating is the choice for those looking for performance in addition to a look that cannot be matched. Paint protection near me.
Follow The Apex Detail Support Group on Face Book for any questions, concerns or if you are in need of general detailing knowledge whatsoever!! / 946245059134747
Follow Apex Detail on INSTAGRAM for more exciting projects!!
/ apexautodetail
www.apexautosu...
#bluecollar #apexsurfaceprotection #apexdetail #apexautodetail
Пікірлер: 132
This is the perfect gateway to a full blown ceramic coating. Doesnt get any easier!!!
@apocalypse487
Жыл бұрын
I like how your product line is starting to cater to every kind of detailer and situation. Thanks for putting yourself out there.
@michaelcampbell01985
Жыл бұрын
So if I wanted to go all the way around my vehicle and then wipe off could I? 🤔
@tonyjoe5707
Жыл бұрын
Just a thought. It might be worth putting a link in the description of the vids for the BC range in the UK? I know you have a lot of followers over here.
89 to 104 is a HUGE jump in gloss units! That is a difference of 15 units... also well done for making this product Apex and I'm keen to buy one and try it out!
@apexdetail85
Жыл бұрын
As much as I would like it to...my product shares the praise as we did a full decon and correction as shown early in the video to that section.
BC2 looks very impressive, especially how it looks on plastics, basically a 2 in 1, paint and plastic protection
Brian, I am really glad to see the deeper dive into your products. They deserve the same stringent testing and show case as all the other products that you test for us! By the way, I used BC1 waited 12 hours and applied BC2 then waited the 4 hrs and topped with BC3. Absolutely Incredible!! Thank you!
@apexdetail85
Жыл бұрын
Enjoy! Cheers!
Love the outdoor application in this video. Want to use this as an introductory "coating" package for the customer who isn't sure about coatings yet, or simply wants a less expensive option with great durability
Durability, Gloss jump & ease of use. This stuff seems legit 👍🏼
Great to know it is sun friendly... sometimes you can't work around mother nature.
That looks absolutely banging Brian! You went full A-Team on that bad boy and it didn't even flinch. Love it!
Excellent product and the darkening on trim was really impressive.
I washed my car today with Apex auto wash and followed up with BC3 then I stepped back took a deep breath and enjoyed the results
@apexdetail85
Жыл бұрын
Yes!!!!! I appreciate the feedback!
That jetting effect really is impressive. You've got a freshly polished 90GU panel here and the contrast is as strong as if it had only been compounded! 🥇
Honestly, the most impressive was how it restored the plastic!!!
That is crazy how it rejects chemicals. Definitely on my shopping list.
Love the ability to use outside as I dont have a garage or cover. Just watched the Blue Collar 3 vid and these two products, especially with the short cure time, look ideal for me. Unfortunately I'm in the UK 😪
@kevkav5680
Жыл бұрын
In2detailing in Scotland sells it !
@apexdetail85
Жыл бұрын
Our distributor in the UK. www.in2detailing.co.uk/pages/search-results-page?q=blue%20collar
@tonyjoe5707
Жыл бұрын
@@apexdetail85 Bingo. Thank you very much. They are a supplier I use. 👍👍👌👌
I’d really test this is the hot Texas weather !
Fantastic !! Can’t Wait To See How Your Wheel Coating Turns Out !! 😎
I know it's over kill but I applied bc1 let sit for 12 hours applied bc2 let that sit for 12 hours then applied bc3!! And the gloss and hydrophobics is insane!!
@apexdetail85
Жыл бұрын
Those are always ideal for any coating. I am glad you are enjoying....Cheers!
Looks like a brilliant product. Easy to use and enough durability as let's be honest we want to freshen up the finish once per year anyway.
@andrewvickers4487
Жыл бұрын
Yeah, I don't know why some pros frown upon the idea like a yearly touchup is strictly for DIYers..?
Now that's something I'd like to try on black plastic trim. Thx Brian.
@apexdetail85
Жыл бұрын
Absolutely!
Wao i buy this i dont have shop but have 8 cars and i play with my toys alone Now i see products like this incredible
Yes indeed I’m just in time to tune in
Excellent video and review Brian definitely enjoy the BC lineup and the BC2 is no exception. I like the look , feel and protection it gives to my vehicle.
I’m really impressed, thanks Brian 👍😁
Looks to be an excellent product, i have a bottle that haven’t tried yet. But just remember that there was 3 layers on the test pannel. Would be curius to see if 1 layer would be as tough……
@apexdetail85
Жыл бұрын
I recommend only one layer...anything more just rejects itself.
Excellent product Brian 👊🏼Very impressive
Nice I’ll be using BC2 this weekend can’t wait to see how it performs.
I used this on my vehicles last fall and been maintaining with Apex Rehydra sheet. Beads and sheet great and the winter crude washes off easily.
@adamcoe
Жыл бұрын
Did you get more than one vehicle done with a single bottle or is it kind of a bottle per vehicle sort of thing? (I realise it depends but say, an average sedan or SUV)
@60trickpa
Жыл бұрын
@@adamcoe oh yes did my truck and my car and have plenty left
Another very good review and a great product as it seems 👍🏼
Very cool Brian I have a dodge dually Cummins I have to do all work outside I’m looking forward to getting this one thanks
Pretty good stuff!
*I've been following you Brian for a long time. It seems to me that your products are 100x more legitimate and have your name and reputation on them. You're reducing the basic choices to either Apex Surface Protection or Dallas Paint Correction for me. Thank you in advance!*
@apexdetail85
Жыл бұрын
You are in good hands with both....cheers!
Ordered! Can’t wait to try it!
@apexdetail85
Жыл бұрын
Enjoy
Obviously it can be stacked
@apexdetail85
Жыл бұрын
Not really...after the first layer....it starts to reject itself....you end up wiping it off.
Great job
Getting ready to do paint correction and sealant on wifeys car, this might just fit the bill! I've been fairly happy with 303 Graphene sealant but it's a serious pain in the ass to buff off(at least it was in my case).
Chemical resistance is impressive
Great 👍video buddy tfs
This is very interesting stuff 👌
After waiting a couple of days in hopes of better detailing weather here in Central Florida, I finished applying BC 2 in partly cloudy skies yesterday to my 2021 Nissan Rogue. The coating went on great and made the red paint pop. I did apply BC 3 about 4 hours later and even my wife was surprised on how good the car looked Thank you Brian for these products as I haven't been this geeked out since Turtle Wax Seal & Shine. One question though, how long before I can wash the car?
@joestewart8966
7 ай бұрын
hey man how was longevity?
Alright I’m sold
Where can I purchase this product
Awesome 👌!
89 to 104 is impressive, what was the gloss number after the paint correction, but before you applied the BC2 product? The after correction gloss number, and after the application of the BC2 is the real number of added gloss units. It doesn't matter ( although it does ) this product looks like something I would be very likely to use. Ease of application and durability are a big plus.
Brian. You mentioned you could walk away for 20 minutes and wipe off. Could you theoretically coat a small compact car entirely then start wiping off where you started?
@apexdetail85
7 ай бұрын
Depending on environment and temps…at least half.
@wescat2
7 ай бұрын
@@apexdetail85 Always appreciated Brian!
I really love ceramic coatings, I'm not thrilled with graphene. I know you don't use it, neither would I.
Will you please do a direct comparison with BC2 vs Defy?
Hey Brian, on the test panel you did 3 applications, so did you essentially do 3 layers of BC2? If so how long did you wait to layer them? TIA.
@apexdetail85
Жыл бұрын
Only one layer is recommended.. this video was for demonstration purposes. After the first layer the coating will reject itself and will be a complete waste.
Hi Brian all videos are great. Question with BC2 do I need to do full recon with brand new vehicle? Wash and iron remover only ok before applying BC2? Thanks for your time. Regards
@apexdetail85
Жыл бұрын
I highly recommend it, yes.
Why do the instructions say to apply with a damp microfiber towel?
@apexdetail85
7 ай бұрын
It helps with those in extremely hot environments.
Could you use some of the primer polish like car pro essence, then use dc 2?
Thank you for another great video Brian question I just bought a travel trailer with the fiberglass siding. Would this be a good product to use on it?
@apexdetail85
Жыл бұрын
Absolutely...this or BC 1
@jims261
Жыл бұрын
@@apexdetail85 awesome thank you for the quick response
Shame, that no chance to get it here in Germany 😢
Can this be applied to a car that already had ceramic or Graphene coating? Thanks.
So, this gives higher gloss than BC3??
Can it be used on soft tonneau covers?
Hi Brian! Can the BC1, BC2, BC3 be applied on a PPF?
How is this compared to Klasse? Also, can it be applied over Klasse?
Hey Brian what is the shelf life once the bottle has been opened? Thank you.
@apexdetail85
Жыл бұрын
Up to 6 months. When you are done using… re-cap it and store in cool, dry area. The cooler the better.
@747rotate
Жыл бұрын
@@apexdetail85 Thanks Brian! Just got my bottle today and just wanted to check. Dying to install it but I've got to wait until it cools down some here in Oklahoma. Two weeks straight with another week and a half to go with temps well over 100° is getting old. I've only got a one car garage and even though it's got AC there's no room for me to apply it... LOL
@tundrawhisperer4821
11 ай бұрын
@@apexdetail85Brain, is the refrigerator too cool to store the BC2? I just now finished applying a layer onto my 2018 Dodge Daytona Charger 392, and WOW!……Just Wow! Nice product! I’ve never had gloss like this on that Yellow Jacket paint. Thanks for offering such a wonderful product.
Does BC2 need the three layers as applied in this video for the chemical resistance?
@apexdetail85
Жыл бұрын
Just one layer needed.
Does BC2 ship with a sprayer?
@edruiz6364
Жыл бұрын
Yes, a misting sprayer.
Can I stack bc2 on your bc1 coating?
Will this work on gelcoat?
I have ceramic coating that is approximately four years old. What’s the procedure to go on top of that? Do I need to lightly polish off the old coating first?
@apexdetail85
Жыл бұрын
Wash, decon, Coat.
Brian just curious as I’m not quite well enough to run a polisher yet. Would the better option for a decon and clay to use BC3 I assume prep is the key to this coating
@apexdetail85
Жыл бұрын
You can wash, decon and use BC2. But I always recommend at least a cleaner polish like Angelwax Perfect Polish.
Lol he said cheap plastics on Teslas.😂
This vs gyeon can coat. Go!
Hi Brian, great product from you all! Is this coating at risk of clogging the nozzle if you don’t clean it out after use? Similar to what happens with CanCoat and how they provide multiple nozzles in the package. Thanks!
@apexdetail85
Жыл бұрын
Absolutely. Cap it and rinse the nozzle.
@chrisfrerichs8360
Жыл бұрын
How does this effect the microfiber towels then. Please
With a bottle, i'm good enough for one car or plus?
@louisgrosskopf3060
Жыл бұрын
I have done my Miata twice. Looking at the bottle I used at the most one eighth of it
@apexdetail85
Жыл бұрын
At least half a dozen cars.
Do you need to strip the car before applying? Can you put this over any brands wax, sealant, etc? Does it come with a sprayer?
@TannerBobbitt
Жыл бұрын
You'll need to strip any waxes or sealants, before applying BC1 and BC2
@apexdetail85
Жыл бұрын
This👆
Hey Brian, Is BC2 okay for glass?
@apexdetail85
Жыл бұрын
Absolutely.
So is this a sealant. What can be used to top it off when washing car throughout the year
@orthodox1717
Жыл бұрын
BC 3
@kirkwilson5900
Жыл бұрын
He says it around minute 5
@apexdetail85
Жыл бұрын
Blue Collar 3 would be perfect.
What’s your best cleaner polish????
@apexdetail85
Жыл бұрын
Angelwax Perfect Polish.
@GeneG-wk2mz
Жыл бұрын
@@apexdetail85 which site to order from?
What cleaner polish do you recommend?
@apexdetail85
Жыл бұрын
Angelwax Perfect Polish.
What about glass? I know your working on a dedicated product, can this be used on glass?
@apexdetail85
Жыл бұрын
It can. 👍
@alanwallace3253
Жыл бұрын
@@apexdetail85 thanks , I’ll try it
What happend to your original coatings?
@apexdetail85
Жыл бұрын
The coop with Artdeshine has run its coarse. This is my very own venture.
@beejay8719
Жыл бұрын
@@apexdetail85 looking forward to trying it in the future once I use all of the other one
Nice, since BRIAN and CHELSEA are in PENNSYLVANIA as I, Just a estimate of charge using this product on say a customers CHEVROLET CAMARO?
@apexdetail85
Жыл бұрын
$500....to start.
Lets go
@craig.encinitas
Жыл бұрын
Yes sir! 🤙🏻
Hope you’re feeling ok after abusing BC2 with all those nasty smelling chemicals 😅 🍻🍻🍻
@apexdetail85
Жыл бұрын
I was getting a bit tipsy! lol
Anything you apply in sunlight or on hot panels will not get the same result.. it will evaporate too fast with the heat before it has time to cure..