Check out my original Lumber Mill here: kzread.info/dash/bejne/aqyhu9Khl5OsqbQ.html I can't believe we're finally doing it for real!

@TenkaiZ

4 жыл бұрын

Amazing creation so far, Moonbo. Do you have a plan to improve your mining vehicle?

@sxveng3847

4 жыл бұрын

monboo add a horn to the truck

@gracegarcia5641

4 жыл бұрын

Moonbo hi

@gracegarcia5641

4 жыл бұрын

XxMR BRO GAMERxX beep boop

@sxveng3847

4 жыл бұрын

@@gracegarcia5641 what is wrong with you bro ?

Moonbo: this tree almost killed this poor little farmbot Also Moonbo: kills the same little farmbot with the spud gun

@Retrodogo

4 жыл бұрын

Victor Middleton haha

@rovilsonhillarysanjan4820

4 жыл бұрын

you were right

@emrah_8073

4 жыл бұрын

I was about to comment the same thing lmao

@generaldraeckos55

4 жыл бұрын

*K.O*

@Welshy101

4 жыл бұрын

I was just scrolling down to find if anyone said that and this was the first on the list xD

I respect your desire to play legitimately versus exploiting glitches; it is far more rewarding when you get something to work as intended.

"The trees are unrealistically heavy" *Picks tree up with single handed tool. I dunno man, the ones that crush houses irl seem pretty heavy.

Moonbo: " I'm sick of telling people to not tell me how to play the.......did I just get a flannel shirt!!!!" 😍 Lol love it

Hey Moonbo, you can make the wood crusher turn off the blades automatically by putting a sensor and an xor gate, the sensor at the end of the thing so it detects when the piston wall is pushed in all the way. You hook up the sensor and the switch to the gate, then the gate to the engine. :)

@FaSchla

4 жыл бұрын

You also can use a controller for it, and save fuel.

@dynamitemonkey6635

4 жыл бұрын

Connecting both engine and pistons to the same button would be easier.

@BigTreefr

3 жыл бұрын

Ooooooooooo that's smart

This blows my mind. I hope it's intentional. You can weld the caged farmers too. Hope that's intentional as well.

@slate613

4 жыл бұрын

But only after playing farmer golf for a minute or two! :D

@Q_master_NL

4 жыл бұрын

And they are super boyant. They can't sink!

@alexandercohen3078

4 жыл бұрын

I WASTED SO MUCH TIME

@saeklin

4 жыл бұрын

Might only be on older maps because I can't weld the farmers :( I hope I can weld logs, haven't tried yet.

@Q_master_NL

4 жыл бұрын

@saeklin there is a specific place where you can weld. It's the metal thing on the back

Watching trees getting milled is so satisfying. I love it.

I like how just as I asked myself "I wonder if he staggered the trees how smoothly they'd feed?" You did and chunks of tree started jumping out.

Moonbo that machine is awesome :D

@Retrodogo

4 жыл бұрын

Monsterek yea

@basictortials2987

4 жыл бұрын

Hell yeah brother

@calelsun

4 жыл бұрын

I haven't even watched it far enough yet and I already concur

@TheBunny-0110

4 жыл бұрын

Maybe the wood pusser a litel biger or higher

@filipender7111

4 жыл бұрын

O ty kurna

Kan, moonbo, kosmo, camodo, etc. Should do a multiplayer series together

@samueltheblonde

4 жыл бұрын

And Scrapman!

@gamingwithclark2830

4 жыл бұрын

Yea

@danieldavidson5447

4 жыл бұрын

Isaiah White how could I forget! 😂

@MrGamer-dz4zf

4 жыл бұрын

And scrap man !!!!!!!!!!

@jelle2306

4 жыл бұрын

And dieseldesign he has a legendary base and way of thinkinh

"Letting your wood sort itself out is a great time saver" - (Moonbo, 2020)

@justafan9206

2 жыл бұрын

Timestamp?

@DoggosGames

2 жыл бұрын

@@justafan9206 24:30

Moonbo: cuts down tree Also moonbo: omg we almost crushed this poor little farmbot here Also also moonbo: proceeds to shoot the farmbot

@imnotsure6618

4 жыл бұрын

I had the same idea😂

@emrah_8073

4 жыл бұрын

Victor Middleton you both commented the same thing?

@imnotsure6618

4 жыл бұрын

Yea😂

@J0hnB09

4 жыл бұрын

Emrah _ Glitched maybe.(same person said same thing twice.)

I've actually seen haybots distracted by large rock bits. Like when you first break up a block of rock for resources and it splits into the 2 big rocks (which splits into 2 smaller rocks a piece which yields 1 resource log a rock piece) a haybot was running at my vehicle and then it turned and then started attacking one of those. It actually broke it in half.

I know the weld option was removed recently but I love the idea of a lumber mill over just an easy harvest/refine machine. If you made the feed tube a bit wider you could possibly tilt the lumber truck to just dump the logs straight into the feed tube. Raise the walls and enclose it with a ceiling hing so they don't fly out.

18:58 That's why being a lumberjack is so dangerous

Something that might be a little more efficient is adding a saw blade to the back of the truck. Then you grab the entire tree, mount it to your truck and run the saw to cut it to length. Then you can mount the chopped off piece too. No need to move your truck around to cut in half, since you are already out of the driver's seat.

That lumber mill is awesome!

Scrap man- takes a few hours to make a car that break trees Moonbo- *Completly makes a tree refinery system*

If you add a side pusher onto the truck then a lid to the lumber mill you might be able to speed up the process. unhook the logs form the bed of the truck then push them into the mill. A tipper could also work.

I think a good rule to see what is intended to be picked up/welded would be if you can't place it on the lift, you shouldn't weld it.

I agree Moonbo I would rather see how you play the game. Honestly that's why I'm here. To be honest you Scrapman and kAN such different experinces day one. That it is why I continue to watch you 3 play through survival.

Hey Moonboo, just a suggestion. If you add a blade at the very end that is stowed below/in the trailer and comes up at the very end you could still weld and you the saw blade at the end to cut off anything that hangs out to long and just reweld anything that falls off.

Very Lucky Guy 😀😁😃😄😍 👌👍👏👏👏 2:23

I'd say put a weld point on the front of the truck, like a little elbow piece at the center, then make a rig to house the sawblades and whatnot, instead of cutting holes into the truck for fairly unsightly mounting points for individual saw blade arms. Then you could also be able to hotswap attachments, so say you want the truck to cut trees, you can weld on an attachment with a bunch of saws and connect some buttons. If you want to be mining with the truck, you could do the same thing, but with drills.

So... I did this, too; but I wanted to compact it. I got it down to 1 saw blade on a piston, 3 sets of 7wide wheel stacks, 2 on pistons. Weld it behind the blade, activate, it almost autofeeds (had to lift/lower blade & innermost week set manually) the entirety of any tree. Set it up on a truck W collectors, refiner, chests, bobcat, so I chopped then straight to the mill.

I was waiting for you to make it in survival for so long now, happy you finally got around to it!

i love how these videos excite me and give me something to look forward to during lockdown

Probably the most creative, most awesome invention I've seen for scrap mechanic survival so far

I don't even think he needed to unweld the tree because at the end of its cycle it's pressed against the saw blades

I really love your method. I'm finally at the point where i'm ready to start logging in the game and i already started work on a machine before watching anyone's machines but, i decided to take a break and do a bit of a search for what people came up with in their games. That is how i ended up in this video and , i'm impressed. It's crazy though, the insane amount of different ways people have come up with to gather their wood. :-D This game is awesome.

@JakeSimmer

4 жыл бұрын

Im trying to repeat this machine... its nice to play around with the physics and machines and stuff, got a small car with a blade on the side... very funny!

I appreciate that you don't use glitches . I feel the same way.

Love the content Moonbo! If only I had a gaming PC, but when it's affordable I can't wait to do stuff like this!

Imagine a vertical cutter on a vehicle. Cut the base, weld to the underside of a tall platform, let it loose to fall into a verticle chute directly to sawblades at the bottom...

WOW! im impressed!! Thanks for that, cutting tree in lumber was the worst thing for me , as my truck couldnt ever get the log right! but now im going to change my whole set-up!

I think you are soo smart the way you play the game!! I love your videos 💙

I love the way you play survival. You make the creations look so amazing.

I don’t know if you will see this but I suggest making a glass box around the mill and make a opening door/ window near the pistons where you can weld the trees in, this will stop trees falling out and you could still see the mill

"This tree almost crushed this poor little farmbot" Pulls out rifle "But failed, and that is something I won't do"

you should put a roof on it, that way the logs dont fly out, and maybe a little bit more walls, just to guide it better

Cool idea. It’s nice to see people playing the game so differently.

To be true, all this welding and so on costs a lot of time. I can get the same amount of wood done with my temporal solution. ;) But not bad at all. My suggestion, skip the last part, rebuild your sawmill a little bit with an additional side feeder and redesign your truck to a dump truck being able to unload to the side.

If you plan on refining multiple trees at once, it should go a little easier if the back wall was a little taller. Great build either way.

You could add an Exclusive OR gate and put the piston switch to that.. then a sensor which acts as a switch to it too.. then the sensor on top of the pusher and detect a color at the end... so when it has reached the end - it retracts automatically. Also, I would've added it to the truck just so you don't have to go back and forth... ie: a split cab design so the tree can fall right into the bed. Then the chomping bit in the back, a lift gate at the front which rotates up then pushes back into the blades. Also a bearing drive double supported to avoid glitching and free fuel.

@Acecool

4 жыл бұрын

Also, not showing the final after the refineries are done is meh.

Do you actually have to disconnected the tree from the pusher before you start it? once the last section comes into contact with the blades, seems like it would disconnect when the log changes state to cut pieces. just a thought, I haven't built this thing yet.

@novas2285

4 жыл бұрын

i have a same question and i need an answer

@rewrew897

4 жыл бұрын

It probably would effect the pistons, perhaps even make then glitch out

@uggranpops8442

4 жыл бұрын

yes,yes he did, as demonstrated in the video multiple times

@Dreigned

4 жыл бұрын

@@uggranpops8442 yeah, I think you misunderstood my question. I asked what happens if you Don't disconnect it. Moonbo disconnected it every time. It may glitch out, as Andrew suggested. Was just curious if it was a necessary step.

@uggranpops8442

4 жыл бұрын

@@Dreigned ahhh that's actually a very interesting question sorry about that

Now all you have to do is find a way you can store loose logs that autofeed using sensors and rotary feeders into the sawmill to process :)

this whole welding trees is gonna make for interesting new treehouse designs

Your videos gives me so much inspiration for when I play this game! The creativity in this game is endless! Love your videos!

18:56 The trees have taken their revenge, hahaha.

Next maybe build your own base, and make it very cool... I would love to see that Moonbo...

@Moonbo

4 жыл бұрын

I'll be building a base soon, it's going to take a lot of grinding!

Can't tell who's my favorite so far Moonbo, Johnbane, kAN, Scrapman, or Squid

@dummie-8968

4 жыл бұрын

I like all of them

@uncah_bucchal2953

4 жыл бұрын

Don't forget Diesel, and Z1 isn't bad either! All these guys are great and worth watching just for all the crazy ideas! Especially when you stink at this game like I do!

@2xvxb609

4 жыл бұрын

Z1 crap

@slate613

4 жыл бұрын

Imagine a Multiplayer Monday with all seven! The insanity might break the game.

@greennitrogen8850

4 жыл бұрын

Josh Malley Y

Moonbo! You can place blocks with the vacuum pump, try placing cardboard block on the pusher and making it destroy with a spud gun so you dont have to destroy it and you can jut weld and its automated

Idea. Make the payload in the front with arms that hug the tree so when it falls it falls into the cart then have a way to manually push it off the cart right into the lumber mill

Really cool build, my lumber mill doesn’t work as well as this, thank you for the help!

You are so creative and inspiring! I love too see all your different creations, and I also like that you play the game as you think is fun. With the bot crusher at the farm, all the different vehicles and now this. Keep it up, I look forward to your videos every day!

Thank GOD someone finally said what you prefaced your video with. I'm so tired of seeing people going to other youtubers playing this game and asking them to do the same glitches and concepts. They aren't even interesting in the first place, and telling or asking them to do that is downright silly.

I loved that little rant in the beginning, :D also the mill is AWESOME!

@Moonbo

4 жыл бұрын

Sometimes you just need to vent! lol

I respect the no glitch philosophy, Keep scrapping

Oh wow awesome. The truck could use some work to make it easier to take the logs off though but gotta say looking forward to trying this myself.

All I could think if while watching this is that you could make an awesome log cabin.

You should make the lumber mill with gravity so the trees go down a shoot and into saw blades that way nothing can fly out

YES!! Finally someone else that thinks that build a movable full sawmill is not a great idea

i wonder if you actually need to break the weld when feeding the trees, or if it being fed through the saws breaks the weld for you. might save time.

Idea: make a base out of the redwood trees themselves, I don't think farmbots can get through them

so dope!!!

Moonbo: awww... we almost crushed that little farm-bot Also Moonbo: proceeds to kill it with the Spud-Gun

I play the game with a special rule: I don't use chests except for automation. When I travel, I cannot have items on me (except blocks, I'm not insane). It changes everything, and it's pretty fun. I did this because every items in this game have a model, and it makes organizing my stuff all the better.

I really like the concept of this lumber mill. It could probably be easily expanded to allow crushing more trees at once. The only thing I'm personally not a fan of, there is still a lot of manual work involved with the whole welding logs, remove blocks and what now. But still cool regardless.

Maybe you can do this layout on the truck, and let just the saws, bots and chests in the floor? putting those pistons on the truck with another layer of wall and make them push directly to the saws, changing the actual height ofc

You just gave me a super good idea from looking at your setup thanks so much. gathering wood got on my nerve some times

i remeber when you make a log one in creative. now you've done it legit. It's so amazing to see something old so revamped and improved.

You should eventually make the mill wider (maybe 16 blocks?)and weld the trees to the wall thing in the truck and have the wall thing be connected to the truck via one block you can then maybe weld the wall thing with all the trees on the wide mill and process them all at once

@Moonbo Make the truck the same length as the mill. Then place a saw or manualy break to clean up the end peices. 😁

the lumberjack jacket looks the best in my opinion with the glasses and some gray pants also computer backpack

You could probably build a sort of magazine for logs! Stack the lumber ontop of each other above it and let them drop in one by one

I figure this out yesterday, but am still low tier stuff, so if your vehicle flips it won't let you pick it up till you remove the resources. guess they don't want it to be too easy lol I do want to try make a log fort around my farm and see how that holds up against farm raids

I did not know this. This is damn useful. I need wood for my boat. 😂

@afoxwithahat7846

4 жыл бұрын

You can use those cages, they float more than anything

Make a tailgate on the truck bed that rotates out and then extends down to the ground. Then weld the trees to it standing up, hit the switch to close the tailgate? Easier transport

I was literally building one and was about to crate a big crane like vehicle but then your video came out 🤦🏾‍♂️ that’s freaking dope

Moonbo: I don’t want to use glitches. Also moonbo: I don’t know if this is a glitch or not but I’ll use it. Me: it’s a glitch that u can weld the bottoms of trees.

@Moonbo

4 жыл бұрын

You have confirmed that it's a glitch?

@JakeSimmer

4 жыл бұрын

I was thinking the same thing ;-) but we all play the game how we want so its ok... ;-)

Moonbo I know a way to make a flying creation, without glitches, with only 3 thrusters ! But with the new weight balance my creation isn't stable anymore, I'll fix it tomorrow, but if you want to check it out it's called "VTOL - Pod B3"

You could also add a craft bot that is on loop at the back end, and make it craft the actual tier 1 wood

I like your saw mill! Maybe adding some rollers underneath the wood would make it faster for the big logs? You could do that with some free bearings and pipe pieces

You are the most creative Scrap Mechanic Survival player I've ever known

I think it would be cool to make some sort of magazine or queue for this. That way you could just retract the pistons, have a new log roll in, then push it foward again.

Y'know what I just realized? The Scrap Mechanic devs kinda did what Mojang did a while back. They took some stuff from a cool mod and added it to the real game. (I'm talking about the sawblades)

I just said cheers to you and Jungkook cup of coffee you are a good person you don't need cheats

Moonbo is the Mumbo Jumbo of scrap mechanic

I love the lumberjack sweater

If you want. Can you build a hammer powered boat?

Make one of the trailer walls fold down and make the trees free floating so a piston can just push logs into the mill making it easier

For as long as it's been in the game at the point, I would say it's not the stability glitch. It's the stability mechanic. =D

Giving me ideas for my survival world. A truck that can cut down trees, but there truck also has blades under it. Drive over the tree to tear it up and have it go in the collector

You need the piston on the tree truck so you can back the truck up to the lumber mill and feed all the trees into the mill at once.

I love the entire idea of this so cool,my only issue is if you get the stump doesn't that stop the tree from growing back

Moonbo is like a real Lumberjack

Me: hears moonbo talk about the giant redwood Also me: looks in the background of the sawmill and sees a HUGE tree._.

When your in your base you see mono cutting down your trees :D

If you are planning on building a base I would recommend stealing the rusty metal from the warehouse. You can use it as a base material and it is easy to get

Another entertaining build!