Something that has come up which I realised I had not explained very well was. ‘What happens if the routiner is running and the count button gets hit” well the count will still go up. As it’s 2 separate systems. The routiner uniselector disconnects the Nixie tubes from the counting uniselectors and routes them through itself. The actual counter is completely separate. Meaning it will work, no matter what is happening.

@a.ijuhasz135

2 жыл бұрын

Something isn't add up for me, There are 9 sounds but only 8 rotator Are there some kind of combinatory trickery?

@gcewing

2 жыл бұрын

@@a.ijuhasz135 I think some of the digits are connected to more than one note in the sequence.

@MikkoRantalainen

2 жыл бұрын

@@a.ijuhasz135 It sounded to me like the actual chime that was played was 12343456 where 1 is the counter for the least significant digit and 6 is the most significant digit.

@isaacmurray8490

2 жыл бұрын

Where do you get your uniselectors and nixie tubes and stuff like that?

@elishahodgson1635

2 жыл бұрын

This is one of my favourite videos so far, just started listening to you on Spotify and really enjoying that too. Is the song from your outro on there anywhere? I can't seem to find it (I know it's a remix of some classical piece I've forgotten the name of but it's so epic! 🤩).

You should put resistors in series with each of the nixie anodes to limit the current for maximum tube life

@LOOKMUMNOCOMPUTER

2 жыл бұрын

what resistance would you recommmend.

@teslakovalaborator

2 жыл бұрын

@@LOOKMUMNOCOMPUTER For your big tubes, approx. 22-47k 2W in case you're using around 180V should be ok. Note that nixies are current driven, so they need this resistor.

@mattsan70

2 жыл бұрын

If you have current limiting on the boost converter you can do it that way. You won't need any current limiting resistance in that case

@Sine1040

2 жыл бұрын

@@mattsan70 Not if you connect multiple tubes parallel. Always use a current source or resistor.

@LOOKMUMNOCOMPUTER

2 жыл бұрын

@@mattsan70 that’s a very good point. The power supply I ended up using was the one not at the start of the video. And it was one for Nixie tubes. I’ll have to check the schematic as other projects I saw with that supply had no resistors. So possibly it’s already present. But I’ll have to check

Now I have uniselector envy. Beautiful job on the period correct wire harnessing also! If we find a certain 1960’s rocket to rewire we know whom to call…

@franic_scopes9165

2 жыл бұрын

Or an airplane

@lasskinn474

2 жыл бұрын

"today we have here on a loan some interesting bits houston and orlando and we'll see if we can make them boot up"

@LOOKMUMNOCOMPUTER

2 жыл бұрын

haha cheers marc! im sloowly gettng a knack foor that wiring. :D. good luck on fiinding some uniselectors!!

@twiff3rino28

2 жыл бұрын

Saturn V?

low key sam makes me feel bad about my wasted potential with how many projects he is able to tackle. living vicariously will suffice!

@laurahaaima1436

2 жыл бұрын

Yeah he makes me feel small too.. but inspiring.. man what a genius..

@wozit1

2 жыл бұрын

So true

@patprop74

2 жыл бұрын

Right.

@PBTophie

2 жыл бұрын

It's always good to have several projects started and running simultaneously without finishing them. You will eventually finish some of them, especially the passion projects, but most of them will remain unfinished. This creates a library of potential should you have need or a reinvigorated intrigue for a project. Instead of starting from the planning stage, you've already got the project started; which makes it a lot easier to finish when necessary. Relevant case here is that Sam already had, arguably, the most difficult part of the project accomplished; that is obtaining enough of these 60-year old parts to make a counter, tubesaver, and sequencer.

@neonblack211

2 жыл бұрын

Same he's incredibly productive

When I have to devise something in base 10 to transfer to music, I usually use a pentatonic in 2 octaves. It gives nice result, because if you use chromatic, the semi-tones sometimes don't give a clear note difference, specially in noisy situations. Nice work! Really clever. 😊 Edit: btw, using the 2 octave pentatonic is also a nice way to personalise phone extension numbers (normally 4 digits), so you're able to know instantly in an office which number is ringing. Not needed now that we work from home, lol!

At 8 minutes, I'm sitting here, amazed at how Sam is working with the 120V supply on and he's not getting zapped. Then, at 9:50, I'm like "Yup, been there, done that."

@werrrnerrr

2 жыл бұрын

Everyone working with electricity pulls a Mehdi at some point in life...

@curtishoffmann6956

2 жыл бұрын

@@werrrnerrr The question is whether you let it happen a second time. Not of purpose.

@TiogshiLaj

2 жыл бұрын

As Quinn Dunki said: "Who's got two thumbs and is the shortest path to ground? 👉😥👈"

@robertsneddon731

2 жыл бұрын

There is no way it would ever work if he didn't get zapped at least once. Sacrifices must be made (gazes at bleeding knuckle from some metalworking earlier in the day...).

@bzqp2

2 жыл бұрын

The supply is low voltage I think.

There’s something very calming and hypnotic about 17:43-19:44. I wish we could get a one hour loop of just that…man, that would be sick.

Very nice Job! I know the amount of time it takes to wire something like that, so yes, you have Patience :^)

@jstro-hobbytech

2 жыл бұрын

I agree, especially when you say patience Sir! The pla he used to print the stands will break down years before the counter. Ha

I live for electromechanical stuff like this...

I wish I could like a video twice. absolutely legendary, Sam. this museum rocks!!

I'm in awe of your brain, seriously the coolest video I've seen on KZread. you keep inspiring me with every video you post!!

@LOOKMUMNOCOMPUTER

2 жыл бұрын

It’s messy in there

Nixies *and* uniselectors? Be still my heart. Electromechanical gear is so cool. Thanks for sharing!

Because of the discreet stepping of the counters, I like the visual effect of the numbers "flipping" over similar to a flip clock or board that you see in older transport terminals.

@mikolasstrajt3874

2 жыл бұрын

I am sure that some of the flip-flop displays used something similar as driving logic.

Never taking the easy path .. A lot more interesting than just Arduino and some LED digit displays.

I worked in Italy on a 1969 tarmac batching plant..it was all automated electro mechanical,nixie tubes everywhere.the wiring was all tied up with cotton to keep it tidy. It was truly a work of art.boggles the mind how they made these machines,and it was super reliable too.All the switchgear on the back wall and the relays clicking in and out,you kinda get at one with the electro mechanical gear .

Dude! That's just freaking beautiful. So nice to see such lovely old-school, hard-wired, electro-mechanical awesomeness.

Great Job, I can remember as a lad in the 90's removing old step by step telephone equipment.

Excellent! Shades of Clockwork Orange at the end. 😊

Fun fact, the This Old Tony video is how I found this channel and you have since blown my mind more times than I can count.

I love everything about these old fashioned steppers and relays. I even like the way the antique phenolic smells. I actually taught myself how to make several decimal counters. NIXIES and "Decatron" tubes were great fun to play with. Decatrons were really cool- they could count ten digits with only 3 connections. Then I made seven-segment displays before they were in everything. Growing up playing with this stuff gave me a lifetime career as an electro-mechanical inventor/tech/trainer.

@arubaguy2733

2 жыл бұрын

Relay logic works the same as IC logic gates, just a lot more bulky and power-hungry.

That machine has an incredibly powerful, aesthetic and artistic aspect !! It cover everything it's designed for to the maximum in a repeatable, reliable, satisfying way. But at the same time i made very simple concepts that just intricated in the way that's very much your gimmick. It ressembles you and is jus a wonder to contemplate, hear and understand

Never understand a single electronic thing in your videos but I always watch till the end. Bloody brilliant, you are. Love your stuff.

This is amazing! The whole idea and then the jingles on top. And just as I started to feel sorry for the higher numbers just sitting there forever, you added the 60s rotation. It is so cool and made me happy!

I am in awe of your imagination and then making something like this not only work but do a whole bunch of other cool things. Simply brilliant. Cheers

Not gonna lie this makes me so happy on so many levels. There is something so satisfying about the scalability of analogue circuitry and the way it lets you think about the world. Thank you for being you and doing this

A unique jingle for each visitor is absolutely genius!

Thumbs up for the oldschool twine cable management!

I love breadboarded circuits being built on a literal bread board.

Love it! Brilliant channel - so pleased I discovered you. Thank you👍👍👍

What a marvelous talent you are. Thanks for sharing.

That put a lasting big wide grin on my face. Thanks Sam!

Love the videos, Sam. I've been doing the 'plug it together and program it' thing for the past few years but you've inspired me to stoke up the soldering iron and start actually Building Stuff again. First off is a re-build of the 2nd circuit I ever made, wayyyyy back in the early '70's.

I remember making light boxes for my mobile disco in the 90's, And forgetting that the Bulgin cable was plugged in whilst sorting out the wiring. The reaction was pretty similar, but with expletives ;-)

@jimmyburnworld9572

2 жыл бұрын

^this, and male to male Bulgin connecting cables. Even brought a curious par lamp set with xlr connectors, had to be careful not to confuse those with the speaker cabs. 90’s diy mobile disco kit was awesome!

Sam, I will definitely be visiting at some point. I REALLY want my own personal jingle. I've said it before, you are amazing! Seeing you perform at emfcamp was a highlight of the weekend. Keep doing what you do.

Thank you, been watching, liking for years, this project is so inspirational both electronically and musically. Maths, music and electronics naturally start producing useable melodies... Are you able to trigger a well known chord sequence in different orders? Or with tape machines, and tape speed with drums or samples... Yes Mum No Computer, so much talent. Perfect use of KZread!

This is excellent in every single way, and I absolutely love it! Definitely going to be an awesome attraction for your museum!

ahhh man! That is soooo good! Love the really understandable analoge build. Smiling with every new feature :-)

Complete legend. Thanks Sam. Loving this project. 👍

love that you got the Nixie tubes combined with an an analogue relay-based sequencer that plays a couple notes - verrry coo sam!. 🤩🎶

You're really brilliant :) I'm impressed by your ingeniosity !

coolest nixie tube project on the internet hands down.

Singing the notes, always love your vids. You're a musical-mechanical genius. Absolute inspiration and mad man.

9:46 That face of confusion and betrayal when we shock ourselves.

Love this, and well done for using the traditional cable lacing technique on the wiring for added authenticity. The way each selector switch indicates an order of magnitude more counts than the last reminds me of the bank of power dials in the 1956 sci-fi movie Forbidden Planet that measured increasing orders of magnitude of power use.

Blown away Sam. Brilliant!

I'm mostly just envious of your cable lacing.

You must have some fascinated youngsters at the museum , I've seen it all before and I'm fascinated .

I've been watching you for a while now.. and I'm still astounded by your ingenuity and skill !

Great...now I'm going to have the solder town melody floating around my head all day. It's solder tow-ow-own.

Those nixie tubes are beautiful

More pure magic :) Love the jingles!

You've essentially created an interactive electro-mechanical AI to re-write and perform iterations on a theme in perpetuity. Imagine the day a customer comes through the door and it plays "shave and a hair cut" or The Kinks

I love Sansui! I have the same amplifier in use! It sounds so warm.😍 congraz for the good taste!

So much more than I thought it was going to be. The Westminsterification of the sequencer really makes it musical. The one thing I want to know is what happens if you hit the button to register as a new visitor right when the routiner goes off or is already running. I'd also like to see how much more you can do with all those unused pins on the uniselectors. I'd like to see them explained more close-up and in more detail, and a project which uses even more of their capabilities would explain it better.

I bet he eats 3 Weetabix every morning...WOW! I wish I had this guys brain . Such a delight to see new old stock obsolete equipment being used and given a chance . VERY VERY WELL DONE !

I'm sure you get loads of these comments but just found you. This is... I don't know how to... You are some kind of crazy genius. Thanks

This is awesome stuff! Gotta love that good ol' Nixie glow! I now also love the sound of those uniselectors, just something about mechanical clicking that is very satisfying.

Love it man! Can’t wait to have beer I a few.

Never cease to amaze us . Just wonderful

I haven't enjoyed a video so much for ages. That was bonkers. I have no idea how you did it. A work of art.

That sounds awesome with the synth hooked up to it.

I'm a sucker for nixie tubes... Sweet project! And cute cat!

You absolutely broke my brain towards the end there....and I'm a musician. Awesome video.

Astonishing! Your Creativity knows no bounds. :)

As a fan of the Interrupters, I find it interesting to know this is a physical object and not just a clever band name

Just an amazing channel. Now, I dream of an Electro-mechanic-punk movie where you're the Art and Props Director !

I'm a sucker for anything with tube on it, and this is a great use of all the old parts. Love it!

What a cool STEM project! Really really neat! Love it!

Loved this, and loved 'A Question of Blood' remake at the end - just cracking!

5:37, you just got gnomed. Those counters are very rad, nice vid!

Amazing content as always, had a great time seeing you live at EMF!

I love your videos it is crazy to see how smart you are and how you use old stock to make new stuff

Holy Shit. That is super cool, and now I want to make a full apocalypse-proof stable data storage array... someday.. somehow. You are obviously very intelligent, but the thing I love the most is that you just do. You just go, and you do, and the things you accomplish by just applying yourself are incredible. It is quite inspiring. Thank you for being such a prolific maker and for sharing it with us all.

I'm very impressed what an amazing machine you have made , well done

Wow. This is amazing. Unbelievable work of art.

I see you rocking the TS100 soldering iron. I upgraded to the JBC BT-2BWA soldering station last year and never looked back. It's so incredibly powerful! The tips are hot when I pick up the handle.

It is insane what kind of new old stock parts people hold onto. Wow. So cool.

That Electroboom moment at 9:45 XD at least your capacitors didn't explode.

Amazing build!!

The sound of them clicking is about the most satisfying thing I’ve ever heard…

You're a true artist mate, it's beautiful!

I built this same thing in minecraft years ago, but without the music. very fun project. what you made is beautiful

Loved the organ music from last time in the background

We have all zapped ourselves at least once Sam, but love the projects you've been tackling, also impressive vintage knowledge

My nixie collection started with ~20 ZM1040 the beatiful orange coating makes the numbers pop, and the fact that the air pipe is on the bottom makes for a beariful device they're the pride in my collection I've them in their original boxes

Gripping awesome!

Those nixies are an absolute gem. It's a shame they went out of fashion.

Amazing! this is the best thing i ever saw on youtube!

Brilliant. You’re a gem

I love your solder song!

Absolute Legend, I love this!

I love this electro mechanical stuff, i really need to see your museum.

Another genius at work!

Great wiring job!

Nice one! I'm gonna have to record every melody I get when I come down from now on! haha, could be awesome to set up a database of people's number and melody when they walk in so there's a documentation of the various melodies people got and how it evolved over time :D

Beautiful!

Absolutely LOVE this!

Amazing stuff!

I enjoy seeing projects like this. Rookies to electronics can actually VISUALIZE what's going on in the modern chips by seeing the mechanical systems that predated. it.

Absolutely brilliant