I've always wanted to make that SmartKno, and now you go making a video about it and go into more details. Love it!!

@greatscottlab

3 ай бұрын

I will see what I can do :-)

@jatinkrumkar7689

3 ай бұрын

I also wanna make one please help me out

@nimoy007

3 ай бұрын

Me too.

@Madthrax23

3 ай бұрын

Please make one for home assistant :)

@spikero

3 ай бұрын

me too

So many amateur astronomers that build encoders to their rig need to know this!

@DUIofPhysics

3 ай бұрын

The repeatability / accuracy is pretty bad for on axis magnetic encoders. They're better off with optical / off axis magnetic tape / capacitive encoders.

@bobert4522

3 ай бұрын

Technology has been around for decades. They know about it.

@imbass8151

3 ай бұрын

@@DUIofPhysics beat me to it lol. still has room for improvement tho!

@101blender

3 ай бұрын

They're known as digital setting circles. We already have them.

@Poult100

3 ай бұрын

I was going to make the same comment! Thank you for sparing me 😊 However, I wonder how expensive an encoder with 10 arc seconds resolution would be 😬

Encoders on motors have been a key part of my robotics builds, being one of the ways to estimate how far a robot has moved, or try to keep multiple motors going at the same speed. Paired with PID loops they are a key component.

Hey Scott, thanks for your great and always so informative videos. I just wanted to add a small correction, namely that the CUI encoder has a PPR of 2048 - but that is pulses, on each A and B outputs. Because these outputs are in "quadrature", they form a 2-bit Gray code, and the actual resolution is 4x higher than the number of pulses, because you count both the up and down transitions on both signal lines. So the CUI encoder has a PPR (pulses per revolution) of 2048, but a CPR (counts per revolution == resolution) of 8192, which works out to an amazing 0.044° resolution, twice that of the AS5600...

@greatscottlab

3 ай бұрын

Awesome. Thanks for the feedback.

@Munjaal7

3 ай бұрын

One of the primary issues I've had with quadrature outputs is needing to read them on interrupts to avoid missing position (which causes a bunch of issues on slow microcontrollers) or needing peripheral microcontrollers just to keep track of position that can be polled when required. Having raw angle from the encoder would make it simpler, at least for cases I've been having trouble with. If you do know of any way to simplify reading from quadrature outputs, please do let me know.

@runger1

3 ай бұрын

@@Munjaal7 Yes, depending on the hardware you choose, you can read encoders with no interrupts and zero overhead. It depends on the MCU having support for this, but for example STM32 MCUs or SAMD51 MCUs can do this using their encoder inputs (part of their timer peripherals). ESP32 has support for it also, although its a bit more complicated there, and RP2040 can do it using its handy PIO units. But a magnetic encoder such as the AS5600 used in this video, or the faster SPI based encoders like a AS5047, AS5048, MA732, MA330, MT6835 and many others can also be read out using digital protocols like I2C or SPI. Compared to using ABZ mode in quadrature using SPI or I2C has higher latency, but for most applications that's not a problem. Using the digital protocols to read the encoders means you don't need any interrupts and can't miss counting them 🙂 If you're interested in this, please drop by www.simplefoc.com and check out our "Drivers Library" where we have Arduino drivers for a variety of magnetic encoders...

@Munjaal7

3 ай бұрын

@@runger1 I had no idea about MCUs with such support built-in. Thanks a bunch for the info, it'd help me out quite a lot :D. I'll certainly look into simple FOC as well, looks quite interesting tbh.

one more advantage is there is no mechanical mating between the motor shaft and encoder, so there is no wear or strain induced by the assembly due to possible slight misalignment. This is a huge advantage for durability. Once the magnet is secured and positioned in the center, and the sensor board is secured in an assembly, only initial calibration is needed. This means, it should be stable under vibration, bumps, etc.

@SkelaKing

3 ай бұрын

Encoders have been around forever, we already knew this

@Qeswara

2 ай бұрын

At this level, these matters that you mentioned are very small to the point of neglect. In fact, this can be approximated to the generation of heat and electromagnetic pollution as a result of the flow of electricity in electronic circuits and wires !! also the sensor in this video is a type of mechanical sensor.

When working on a ventilator system over covid shutdown we got exposed to encoders on motor shafts and I've never looked back. Great way to control all aspects of the motor and now being used on my CNC machine to avoid any skips. Worked extremely well in the ventilator also.

This is how my Open Sim Wheel works. Just a big motor with an encoder on the back and a steering wheel on the front. I might not remember properly but it's at least 15000 steps or 0.024 degree, crazy accurate 1kW 10Nm servo motor. Super good force feedback wheel way before direct drive wheels became affordable. And became an instant fan of encoders on regular motors over stepper motor crap.

ahh i loved the original video and i checked 3 weeks ago if there where any updates on the project. i hope with this attention somebody will pick it up.

I Ordered this to test for a project at work. Thanks Scott! This should work perfectly!

@greatscottlab

3 ай бұрын

Glad I could help :-)

I was reading up the project few hours ago! Thanks for uploading this

Scott, You have the finest drawing hand/skills of any youtuber..

GreatScott never disappoints!

@greatscottlab

3 ай бұрын

Thank you so much :-) I try my best.

@gamesnic

3 ай бұрын

he was better back then

I love this topic! I am trying to learn more about encoders. I'd love to see you going a bit "low level" and read an encoder position using a dedicated peripheral of a microcontroller. Showing how to configure the peripheral and all

Best explanation of rotary encoders I've seen up to date. Thank you! ^^

With all love I appreciate the statement of any kind saying can fix all problems. That’s the a right attitude for someone who is into something. Know the humor of a statement so bold it’s worth giving it a look. One who stands behind an all.

Glad to see someone keeping the smart knob view alive!

This is a game changer for building rotary actuators with feedback. I also have plans to build a homespun weather station and the wind direction sensor is always hard to make accurate with mechanical encoding

Very well (simply) explained, thanks!

Perfect timing, I just rewatched that video, and was curious about the motor used.

Brilliant video.

Great as always!

Thanks for your video! Your videos always make my day. Great work! Keep it up!

@greatscottlab

3 ай бұрын

Glad you like them!

Missed opportunity to talk about SimpleFOC, a true open-source project to drive brushless motors and what the SmartKnob project actually uses under the hood.

@candas1

3 ай бұрын

😂

@pixelfairy

3 ай бұрын

The marketing dept might have had issues

@matthewremington

3 ай бұрын

Yah SimpleFOC is a great library to use and the source code is quite readable to understand what's happening under the hood. I wish there were more driver boards in the 50A range that were compatible though.

@copper280z

3 ай бұрын

​@@matthewremington Almost every driver board is compatible, anything that has an stm32, esp32, or rp2040. That means anything vesc compatible, along with all sorts of other stuff.

@matthewremington

3 ай бұрын

@@copper280z Yah I should look more into those VESC boards, many of them have great specs and prices.

I was planning to make a gaming wheel and, all the rotary encoders were too expensive and the potentiometers were not accurate. But I found out about those magnetic encoders from this video. Thank you!

I have to get one of those Motor controllers, thankyou for showing how awesome they are :-)

Genius Great Scott!

Fuck yeah! I revisited the video to see any updates but not luck... and suddenly one of my favorite youtubers revive the project!!

Nothing like another great Scott video

@greatscottlab

3 ай бұрын

Glad you enjoyed it

I saw his video on this like a week ago. Good timing

Always interesting and always learning!! Thanks!

@greatscottlab

3 ай бұрын

My pleasure!

I love scottbez1's smart knob. Thanks for this video!

When I first saw that Haptic Thermostat video, I had a gut feeling that you're going to make a video related to it!

I wish i knew this years ago when we were building a drawing robot with lego motors. We had constant issues with the motors being inconsistent, an encoder would've fixed that right up

Thank you, I've been trying to figure out how to add rotary encoders to my mechanum drive robot and this is exactly what I need. I just ordered 5 off Ali express.

@mcspikesky

3 ай бұрын

Genuine AS5047P development boarsds can be bought :)

Great explanation. Thanks a lot

Great scott worth watching it..

Very handy. great video 2x👍

@greatscottlab

3 ай бұрын

Thanks 👍

Thanks for this video, it's very interesting!

👍🏻 i recently had a pull request merged to esphome to support that AS5600 encoder. Hopefully will be in the next feature release.

Great info thanks.

Great work! Keep it up!👍🏻

@greatscottlab

3 ай бұрын

Thank you 🙌

Wow, great video 😊 I learnt something new❤ Thanks very much ❤

@greatscottlab

3 ай бұрын

My pleasure 😊

A good introduction video. It might be a good project to show implementing an encoder setup on the RC car you showed in the video to synchronize the motor speeds. I bet there would be a lot of hobbyists who build RC cars for Arduino projects who would take notice of that. It's a common issue as you pointed out.

This would be awesome in a custom sim steering wheel. Even though such encoders are already being used for precision control.

@nimoy007

3 ай бұрын

My thoughts as well

@conorstewart2214

3 ай бұрын

Force feedback is already used in sim steering wheels. Cheap ones use belts or gears but more expensive ones use direct drive. What do you think that could be added from this video that they don't already do?

Thanks!

Really great video, I was looking for such driver.

@greatscottlab

3 ай бұрын

Glad I could help

Your take on a programmable smartknob would be highly appreciated!

Still better than watching the Super Bowl. Thanks for the great videos!

Awesome video

I can see a few handy uses for this. didn't know there was an encoder that could handle the sort of torque a big BLDC motor could generate

The first time i used a magnetic rotary position sensor was in 2011, a wonderful device from STmicroelectronics

Thanks 👍 I am building a CNC machine and will definitely check out SOLO Motor Controllers‼

@greatscottlab

3 ай бұрын

Awesome :-)

inspirational

At last you came to know if it. I hope you make good use of it

you are very great!

you are the best ❤

Really interesting indeed! Thanks, dude! 😃 Stay safe there with your family! 🖖😊

The magnetic encoders work like magic, except on motors. Especially on BLDC using PWM, they get very confused by all the stray magnetic fields. After evaluations, we went with a glass optical disc to get absolute positioning on hobby-style, high performance, compact drives.

Man, I love your intro

Very interesting, wasn't aware how encoders work!

@greatscottlab

3 ай бұрын

Glad I could help!

Those magnetic encoders aren't entirely linear, but its pretty easy to use a stepper to slowly go through its range and map out the error, then correct for it in software.

@ddegn

3 ай бұрын

I think you'd need to figure out how to calibrate the encoder while the encoder is connected with the motor you plan to use. I think the act of mounting the encoder would introduce small errors to the calibration.

@roboman2444

3 ай бұрын

@@ddegn . Yeah, use a small stepper to rotate your whole motor-encoder assembly. Those encoders tend to have less than 1 or 2 * of non-linearity, so if you don't need THAT much precision, don't worry about it.

@ddegn

3 ай бұрын

@@roboman2444 It's been a while (about ten years) since I've worked with this sort of encoder. I have a video titled *"EncoderPositionAndSpeed130824a"* which shows my attempt to mount an AS5055 encoder inside a hobby servo. My setup had lots of error since the PCB and magnet weren't precisely mounted. Since my setup included the servo's gear train, I don't think your stepper motor idea would have worked for me. If I were to try this again, I think I'd just use a good quality quadrature encoder on the servo's output to use to measure the actual vs. theoretical position. It's nice to see these sorts of encoders being commonly used now. Back when I made my video, I had to order a large batch (100) of diamagnetically magnetized magnets. These sorts of magnets weren't nearly as easy to find ten years ago.

I've been building encoders, decoders and motor controllers for years and they are so fun. Just hard to sell. I'm currently working on a very affordable absolute nonius encoder.

Just for information sake: once I took apart a broken Y-axis driver from a vinyl cutting plotter and it had an optical encoder attached to a simple brushed DC motor as one unit, so may be there're some cheap off-the-shelf motors with feedback one could buy online, I mean "cheap and affordable", because in my case the spare motor for that fancy cutting machine cost just unreasonable and ridiculous money.

Maybe 1/8" square neodymium would be easy to align N-S horizontally for such sensor and they are tiny 🤔 Thanks for the video Scott!

Entering the motor driver and controller realm is a big one, maybe tomorrow you will use sensorless control using current and voltage values to estimate the angle and speed. Filed-oriented control is a go and maybe later you will use model predictive control.

For 50 bucks you can get a bldc motor with built in encoder that’s really beefy if you just look for a AE8Z-7C604-A it’s the clutch motor for the ford automated manual transmission and it’s has the 5 pins you want the 3 phases and 2 encoder outputs

I put such a magnetic rotary sensor on the crankshaft of my Moped (Simson 2-stroke). 😂 I tried to move a BLDC motor according to the crankshaft of the engine. I never finished this project though. It's interesting to read out the engine rotation though.

The optical encoder diagram you created is slightly off. Generally it's easier to manufacture the encoder if you put sensors A and B on opposite sides of the wheel. That way they can be at the same height making it easier to build. For example, from your diagram, if you put sensor B over to the left of the wheel at the same height as A you will see it will be on the same side of the hole as where you drew it on the right. But I guess you put them together like that to make it easier to show they are offset from each other.

Great 👍

@greatscottlab

3 ай бұрын

Thank you! Cheers!

Superb video bro, 👍 👍👍👍👍

@greatscottlab

3 ай бұрын

Thanks ✌️

Would additional magnetic sensors, spaced a little further, be useful to subtract external magnetic fields from the signal of the magnetic encoder?

there is one car that got main infotainment knob with magnetic encoder and brake. It features not only multiple resolutlion of force feedbacks when rotating but also it locks when you turn it to the end of selection menu, it would be nice to implement sort of feature as this.

Add that to a low wing RC plane with twin engines and twin prop. Then set a switch to kill the motors and position them parallel to the wing. So you can belly land and not stick a prop into the ground.

hi ,thanks for the video, as i have that very problem right now. can you give a little more information on how you connected the 3 wires with the one side of the encoder? it looks like you soldered one half of the wires from the one cable to one contact point and one half to the other. help would be much appritiated

Hey, in your last video a resistor book was shown. Do you know how much power these resistors withstand?

Wow, the magnetic encoder is perfect for my project! I didn't even know they existed till now, thanks! The physical ones have a pretty low rpm limit.

@greatscottlab

3 ай бұрын

Glad I could help!

@dogwalker666

3 ай бұрын

Been around decades, The early ones had lots of problems, That's why optical encoders using glass plates became industry standard. Optical encoders easily cope with 2800 Rpm. Servo drives all have optical encoders and tacho generators.

@conorstewart2214

3 ай бұрын

@@dogwalker666 you also get magnetic encoders that work similarly to other relative encoders too, the ones shown in the video were absolute magnetic encoders though. For relative encoders rather than just a magnet put on the shaft it needs a disc with alternating magnetic poles and just produces a similar output to mechanical or optical rotary encoders. Optical is good because of the high number of pulses it can produce per rotation, it is common to use a plastic disc with black paint on it to block the light.

@dogwalker666

3 ай бұрын

@@conorstewart2214 true and obviously an optical will have much higher PPR than a magnetic, For absolute encoders it is always optical, The plastic disks don’t have the temperature range of the glass due to warping. and the pattern is photo etched rather than paint.

I immediately in my mind placed like 3 or 4 of these in a dash of a modern car. Then you would just select the function for each knob. Be it temperature, fan speed, air flow position, volume etc. the option for a given knob could be on something like a sliding multiposition switch.

Careful using the Delay function in Arduino it Pauses the whole sketch and stops anything from being sensed conrolled or computed during the delay. It is preferable to establish a timer variable that is updated by the ms of the microcontroller up time and using that to reference on and off timer states.

beautiful 👌, is a economical closed loop motor,. i use this sistem in my cnc ( stepper + driver ),. but whit this sistem you can control all motor, very interessing ❤

Not like anyone would ACTUALLY use a rotary encoder grafted onto a motor shaft... but along with the reasons you mentioned, you'd burn out the shaft bushing in no time flat since it's only meant to be turned slowly (ish) by hand!

How is that gimbal motor if you rotate it by hand? Do you feel the steps when unpowered? Or is it smooth? Would you consider it good enough for a smartknob?

I think you meant to use an ‘interrobang’ ‽ 😊 Great vid!!

I printed out 125/128 gearing to use my 1024 encoders with locked 1000 count drivers.

So now I know what to uses when I can't find anymore old mechanical computer mices.👍

This could be so useful for an Icom RC-28 alternative.

Hello Scott, do you think we can use this for a diy steering wheel? I mean both the encoder and the motor controller?

This may be usefull to build cheap wire encoders, for doors/windows or anything that cannot be done with normal encoder.

Last one is great for building DIY sim racing wheels i think

you probably know but you can also control position of bldc motor without encoders using HFI in VESC

How big is the error with off-axis magnet? Did you try it instead of the "black box" capacitve? Great topic great Scott!

Almost all modern industrial servomotors come with high resolution encoders, usually resolvers, that send position using a protocol, like the royalty-free BISS protocol. By high resolution, I mean 2 million counts per turn. The reason for such a high resolution is that PID calculations are much more accurate and therefore the servo follows the target path mich better amd handles small errors better. I used 2000 count encoders for years, and when I switched to 2M, life with servos got a lot better. Now of only there was a hobby grade high resolution encoder.

Hey, do you know anything about linear encoders? I was thinking about adding them to the axis of a 3D printer. I know they have to be available cheap somewhere, they keep putting them in cheap digital micrometers.

The capacitive encoder looks like it might work very similar to how most calipers work. I guess when using 2 encoder-rails internal you might even be able to make an absolute encoder which doesn't need cross a reset point to know the position. But those absolute encoders often use a different interface, thus not A/B quadrature encoding.

There are inductive Sensors available with good resistance against magnetic stray fields, from Renesas or Melexis.

Great video from Sri lanka😊

@greatscottlab

3 ай бұрын

Thank you so much 🙂

Could that controller be used on an electric bike hub motor and then programed to do like the tesla thing like a preprogramed dance where the bike could go backwards ect?

I wonder if that smart knob project could be done with a regular brushed dc motor like old dvd motors. Wouldnt it be the same principle of applying torque?

cooles Video!

There are other types that work by means of a glass disk that has dark and transparent areas and underneath it is a laser transmitter and receiver.

If this project would eventually become the new SpaceMouse🤔