"we warm it up....and I f****** floor it" LMFAO

@RKHarm24

4 жыл бұрын

When my 2006 Crown Vic POLICE car popped the motor from a faulty Mass Air Flow Sensor, FORD replaced the long block with a 2007 4.6. When my car was returned to me, I was told drive it today like you will any other day. I worked 5p-3a so after calls slowed down and after 1am I got out on the straights smoothest hiway and floored it. After about 4 or 5 runs It topped out at 137mph. When I was issued an Expedition several co workers argued over my car cause it wiped em all. The Expedition topped out at 105 due to the factory speed rating of the tires set in the computer.

@RPM_MEDIA7

4 жыл бұрын

It's either gonna go or blow

I've only been following the channel for a few months and what stands out most is y'all don't shit talk other shops or YT channels and only name names when you have something positive to say. Love that attitude!

@RKHarm24

4 жыл бұрын

Exactly

@BBossman1

4 жыл бұрын

@I will die on my feet , before i live on my knees I have no idea, I don't own a Corvette and have little to no interest in GM products, I just enjoy the content and the personalities on the channel. I don't follow many discussion forums since most are nothing more than big ego pissing contests.

@cbreezyworld2652

4 жыл бұрын

For real ..i get sick of shitty haters everywhere..these guys are pretty cool

“We warm it up and then I fu*kin floor it”😂😂😂😂

I genuinely wanted to hear and see Fran work on that converter, I love the technical shit and yea Eric, people that don't know won't appreciate the behind the scenes trick work😉, have a good one guys👍

Nice tidy an propr work is hard to find these days, RPM takes pride in there work without a doubt never mind the haters and key board warriors. I've watched every episode and season and they know there business. I'm a licensed industrial boiler/ combustion technician and take pride in what I touch everyday. Hope to one day be able to have RPM set up my future ride.

Man I really can't wait to see what Fran puts into his ZR1.

@mattdeloff4348

4 жыл бұрын

Michael Bacon , same! And hopefully some Mexico footage to go along with it..

Always said Eric does some of the most immaculate work on vehicles... and yes i'm a full time mechanic so I do appreciate his work

I love the way y'all hide everything... when your done the cars almost look stock... great work

The ZR1 is one nasty car without the big chopping cam. Very nice job by Fran and the boy's 😁👍

That zr1 is a nasty beast... basically 900 wheel. Nice little daily driver. Kudos to Fran for the awesome tuning! I love how you guys go into detail about what your doing. Got nothing to hide!

Appreciate the effort Fran. Also in the car you are calm because you are doing what you love doing the most in my opinion.

Dreams are made from this ZR1.

Episode starts with Fran swearing... someone turned off engine codes :)

Thanks to Fran for explaining the additional timing and what not to do. Hopefully this help someone else in the future.

I ducking love that Red ZR1!

@HemiLyfestyle

4 жыл бұрын

What the duck you say?!?!

Awesome channel. I'm currently in the market for a C6-ZR1 and find your content very informative. Plus, I finally found the fender plastic I've been searching for forever...(in your store). Bought it last weekend. Thanks.

This video is comedic gold lmfao!! So many moments had me weak 🤣🤣🤣

Definitely have been meaning to call these guys to do a couple things on my zr1 My car also doesnt have the carbon splitter on at the moment looks weird without it

I ducking love that red ZR1 too, but looks weird with its missing front lip. But I guess maybe it’s off for transport reasons.

Fran is bringing KP along the right way”She has to have her NHRA license before she goes that fast”.

If I ever get a vette I'm so taking it to you guys

Steve , the editing was way well done. Content is getting better and better

Getting pissed off at timing tables, I love it lmao

DMS all day!!! Love Matt stuff... glad he lives near me! Where I take my SS!

@ 29:08 “ I mean whoa Steve” 😂😂

Nice job guys that motor is great!

RPM does great work and tuning

I love the sounds of the zr1 corvette thats y i wnt one

I agree with Fran, too many want beefy sounding cams but could care less on the power it actually makes. Posers 😃

@michaelburgoyne115

4 жыл бұрын

I have to admit, I'd take less power for some extreme chop. I can listen to an LS chopping at idle all day and never get tired of it

24:17 best part of the video. LMAO.

That black Z28 in the back looks so good 👌🏾

I ducking love this

"i want to tickle the taint, you know a little video foreplay" I feel violated XD

The way Eric look at u 🤣🤣. That needs to be a gif

that cleetus plug was sick

Warm and let it go!!!!! Same here shade tree works the same if your good

I agree on the timing with Fran, very smart guy.

I just came across your channel because I've been researching super chargers. You're only 40 minutes away from me! Did you guys participate in this year's Hot Rod magazines Drag Week? The convoy drove right by your shop on their way back from Attco on their way to Maryland. Subscribed...

Damn those c6’s have an old school ass gauge cluster that thing is a classic

@tylercouture216

4 жыл бұрын

Uh what

@BigBlueRacing

4 жыл бұрын

Mr. TAMW the gauge/instrument cluster looks old as fuck and out dated it’s the same one they have been using for 10 years!!! Chevy is lost in the sauce making such an out dated pos in a ZR1!! Can you read that now?

Im not a big Vett guy but im starting to dig this channel

I like watching the vids , because i get ideas on how to neatly hide and tuck Things on my obs build😂👌

It was a rare option for the stitching matching the body color

Nice Job! Fran needs to fix his ZR1 asap!

He can do a voice over on the convertor video.

I've been doing some thinking and I think Kyle from 1320 is bring his Corvette to RPM garage!! 😏😎

If Jay Leno or Seinfeld show up, I’m streaking. But Seinfeld is not a corvette guy so I doubt it would be him. Seinfeld once said, “Corvettes are like the F word”. At first people think that he meant their cool. But, it’s the opposite. He doesn’t use curse words in his stand up. - _ -

Rick Hendrick?

I love the c6 zr1s

Fran makes me laugh ever freaking time

Fran is the man..👌

Dude I want Fran to take apart the converter again and trans and explain it but this time with audio lol I like learning stuff I’ve never seen or understood before.

Like the saying, The difference between Men and Boys is the PRICE of their TOYS. The Red ZL1 did real good, but it has cost him $$$$$. Mostly the 1st shop that screwed his car, then paying y'all to fix it right. The outcome was awesome.

"thing is gonna be spicy"

Fran should go around the country and show/teach how to properly tune these bad ass cars!

Fran's ZR1 must be high mileage from all the trips to Mexico and back. 🤔😂😂

If I recall, you could do red, blue, or yellow custom stitching in the last few years of special order ZR1s. 🤔

He walks fat. Lol love videos keep it up

3:08 he was scratching his nuts lol

I almost pissed my pants!! Warm it up and fn floor it!

There are 1,051,200 minutes in 2 calendar years.

What machine shop did the bottom end for that ZR1?

Been a minute since the car wash girl got some work in lol

If it can't take it. It can't stay. Lol

That's red C6 ZR1 is nasty. Fran will be raising the compression on his. As soon as he puts aside the money. Steve what's the name of the theme song for the intro to the red ZR1 on the dyno?

Next hoodie should say RPM break in procedure WE WARM IT UP AND DUCKING FLOOR IT

What type of watch is that he's wearing. Freaking awesome. ✌🏾💯

I'm pretty sure Steve was right about the Ethanol content table. There was a multiplier of 1.00 for 61%+ E content.

@CornFedZ06

4 жыл бұрын

Edit: You explained

To turn voice to text back on enable the google search app. It has somehow been deactivated. Google powers voice to text. Same thing happened to me.

Badass.......so many things.

What aftermarket taillights are those on the red ZR1? Morimoto?

@armandoestrada8499

4 жыл бұрын

Yes!

I love it my guys rpm keep up the work and love video 💯💯💯💯💯💯👍

KaotikGS KaotikGS 9 hours ago Kyles ZR1 and Frans ZR1 from RPM are probably my two favorite cars ever. rich 570 9 hours ago KaotikGS Yeah I agree, but I’m also a sucker for white sports cars. Will 7 hours ago Kyle should've just sent his ZR1 to RPM originally. Couldn't agree more with some comments over on 1320s page

My dad had a 90 C4 ZR1 then when they came out with the 92 model that jumped from 375 to 405 he had to have that traded the 90 in on one now that he is way older he prefers the base models says he doesn't need 700 HP lmfao

ZR1s everywhere 😁

We warn it up Then I fucking floor it ^^this should def be on a T shirt 😭😭

ZR1 s' are the best... I dare someone to say something

Is that gas ported pistons i see?

I see, I click.

Next hoodie “It’s either going to work or it’s not”

1,051,898.4 mins in two years

Eric, Tell Fran that Kong started making Carbon fiber again a few months ago, due to customer demand. Now Fran, I should have said This is the internet and they do make the Kong in Carbon fiber again. lol

@RaceProvenMotorsports

4 жыл бұрын

We know about the carbon we said he doesn’t make the 3D printed anymore

@user-df5hr9uy4w

4 жыл бұрын

@@RaceProvenMotorsports Dumb internet! lol Need to pay more attention. I hope you win in your class at the World cup, I'm rooting for you!! I hope you're going to bring your camera so we can come along. Good Luck Fran!

Lol f**kin floor it....🤣😂🤣😂😊🤣😂

KYLE owner of 1320 video. His zr1.

What compression is it?

Do a voice over on the trans video that Fran did...

Streetspeed717 ZR1 is coming to RPM

My H/C/I C6Z is running 27* of timing in it along with all of the similar setup C6 Z06 cars that have come out of the same shop. None of us have had any issues and have put many HARD miles on our cars. I'm not claiming to be an expert by any means but there has to be more to the 27* of timing jokes lol. Plenty of cars are running that number just fine and making very good reliable power. If there's more to it then I'd surely love to know, I'm always down to learn a thing or two.

@RaceProvenMotorsports

4 жыл бұрын

You must have a really terrible cylinder head...

@perryconnor6373

4 жыл бұрын

@@RaceProvenMotorsports I've got Brodix BR7 heads on the car. Non ported and non milled.

Maggie needs to make a 2650 for the c6 zr1

What kind of Engine does Fran have in his Racecar????? Cauae he's taking it up to 9,000 RPM so was really curious.

@edwardvanhoose6764

4 жыл бұрын

Frans racecar has a LSX with a F1A94 procharger

24:22 😆😆😆

Fran, any plans to get a c8?

31,536,000 minutes is in 2 years

Which video shows Fran working on the converter. Some of us would like to listen and learn

@RaceProvenMotorsports

4 жыл бұрын

the recent World Cup videos

"Supercharger boost controller" 😂

@mrnonamenobody6910

4 жыл бұрын

🤔 i seen a procharged car that was pullied to the max and they had a wastegate on the pipe that was controlled by boostcontroller with co2.

@mrnonamenobody6910

4 жыл бұрын

Hey Fran what are your thoughts on adding a wastegate to a centri blower setup.

@JBC1154

4 жыл бұрын

@@mrnonamenobody6910 I dont know exactly what that would be. ; but centrifugal builds boost with rpm. Pulleys, timing and fuel really is all that would give you more horsepower.

@mrnonamenobody6910

4 жыл бұрын

@@JBC1154 I know but was told that the reasoning behind using the wastegate was for boost by gear boost control etc....so that even tho it was pullied for 30lbs of boost( just using this as a number I don't know what max is for the setup)...the car would only see 10lbs in 1st...15lbs in 2nd...etc..so in a way in would act like a turbo car.

@JBC1154

4 жыл бұрын

@@mrnonamenobody6910 boost by gear would almost be redundant for a supercharger because they cant over boost. But maybe if you just spin because of wheel speed when boost builds. But honestly never heard of boost controller or boost by gear

Didn't even know BBC made headers 😅

1,051,200 minutes in 2 years. I only know that because of the broadway musical rent which has a son 525,600 in a year. lol

Do I need LASIK or do I see wheel wobble 23:03, 23:11

You should race kyle from 1320. C6ZR1 vs C6ZR1

routing and making everything nice and tidey is a major part of time used during a modification. Cant stand when a car looks like someone just kind of "puked" everything under the hood,like a 3yr old did it

1,051,200 mins in two years.