I tried this mod, and I can say that I can enjoy low frequencies at lower volumes and don't have to open the volume too much. 40hz tried and tested. Thanks a lot!

@matus3303

2 күн бұрын

No problem, glad I helped

I came to thank you, I bought the piece and it removed the distortions in songs with very low sub-bass, in addition to adding harmony to the sound. I bought 4 pieces, but I'm only using 2 and that's enough.

@matus3303

29 күн бұрын

Great! I am glad I helped you :)

@user-uc8mr7jy9n

5 күн бұрын

THE LINK TO BUY THE MOD, PLEASE

@matus3303

5 күн бұрын

@@user-uc8mr7jy9n vi.aliexpress.com/item/1005003176227244.html?spm=a2g0o.order_list.order_list_main.51.44821802R72OwW&gatewayAdapt=glo2vnm

@user-uc8mr7jy9n

4 күн бұрын

@@matus3303 thank you very much

i have a mifa wildbox, speakers does sound overdriving at higher volumes with basskick, i notice a soft suspension from the passive radiators perhaps similar to the og motion boom which seems quite good, but with all the distortion would adding weight to it help solve the issue?

@matus3303

5 күн бұрын

Yes it might. Wort the try for just few euros

Thanks for the video, I'll buy it and test it. On my Tribit I normally use an external EQ and increase the Subbass. But I also notice distortions when the music oscillates between Sub-bass of -40hz to upper bass. Tends to make an annoying noise. Have you ever thought about using 3 of these supports instead of 2? How many grams will be in these supports?

@matus3303

Ай бұрын

I think that one on each side is enough. It improves a lot but two gets you tuning of around 38Hz. There is a Low-Cut under 30. The amplifier does not give signal to the speakers so This may be the sweet spot. Most music is not mixed down under 30Hz

THE LINK TO BUY THE MOD, PLEASE

@matus3303

5 күн бұрын

vi.aliexpress.com/item/1005003176227244.html?spm=a2g0o.order_list.order_list_main.51.44821802R72OwW&gatewayAdapt=glo2vnm

@user-uc8mr7jy9n

4 күн бұрын

​@@matus3303 thank you very much

What is the firmware version of the speaker?

@matus3303

24 күн бұрын

Hi, it is firmware 3.5

@dex12223

14 күн бұрын

@@matus33033.5 how about battery life ?

what is the app you using for the frequency checking & are you using the Eq settings from the Tribit app?

@matus3303

Ай бұрын

Hi, it is called "Signal Gen"

@Deeesquare

Ай бұрын

@@matus3303 thank you Matus

@Deeesquare

Ай бұрын

Also with this can you help us with a an image with the best Eq settings for the speaker via the Tribit app

Great, but there could be a before and after comparison of the upgrade. And when capturing, you don't notice any distortions in this box. Do you have a link to the magnetic supports used?

@matus3303

Ай бұрын

Hi, sorry for no comparison but the glue is strong so it is hard to take off-a good thing so it does not fly off. It improves the distortion in some songs. Some songs do not distort. Anyway it makes it sound better with deeper bass. There is still some distortion but the improvement is huge when playing bassy music. vi.aliexpress.com/item/1005003176227244.html?spm=a2g0o.order_list.order_list_main.40.20d41802w2HtgN&gatewayAdapt=glo2vnm

Lowering the tuning point of the passive radiators can cause damage to the drivers if not done correctly

@matus3303

4 күн бұрын

Not sure. Over-excursion happened with the stock tuning. I have tried it with freqency generator and it does not reach the xmax of the drivers so it is even less harmful then it was.

What's the weight of those mag??

@matus3303

Ай бұрын

Hi, 18grams each

One more question my friend, when adding these extra weights, you gain a response at low frequencies, right?But at higher frequencies does your box lose SPL as happens in boxes with a lot of weight on passive radiators?

@matus3303

Ай бұрын

Yes, it decreases spl at higher frequencies but it sounds more balanced

Спасибо вам за идею! Скажите пожалуйста, лучше по две штуки поставить, или по одной? Просто по две, выглядит более красиво и симметрично

@matus3303

27 күн бұрын

Hi, even one on each side is enough. I bought these for an ipad for my car so I had 4. Ipad did not hold so I used them on this. You can cover the tribit logo almost perfectly with one if that helps

@albertalbertov6406

26 күн бұрын

@@matus3303 спасибо за ответ! У меня есть четыре штуки, вот и думаю по 2 с каждой стороны поставить, или по одной. В каком варианте будет лучше звук?

@matus3303

26 күн бұрын

@@albertalbertov6406 I prefer both but even one is a improvement. You can try just one and then test with two it can be taken off. Maybe not press it hard so you can take it off more easily

@albertalbertov6406

26 күн бұрын

@@matus3303 спасибо! А вам с двумя с каждой стороны нравится? Вы в каком варианте предпочитаете?

@jhonnh.7012

15 күн бұрын

I bought 4 pieces, each one weighs 25 grams, I only use 1 on each side because the sound is much better and with more definition and volume.

nah the boombox 3 is crap

@JBLBASSENJOYER

10 күн бұрын

How? its arguably one of the best portable bluetooth speakers.

Wenn man Ahnung von Equalizern hätte dann wäre einem auch klar das der Lautsprecher bei dem EQ übersteuert😂

@matus3303

6 күн бұрын

I know. The speaker is overloading even with -6db in some songs so the EQ is not the problem. After this mod it does not distort as much even with +6db. I doubt anyone uses this speaker for serious listening anyway. If you have any idea how EQ works if you lower the gain by 6db and add 6db at 50hz it is not going to overload. I have been doing EQs with REW + EqualizierAPO, Genelec GLM, DBX sound processor This speaker is DSP corrected but we have no idea which filters are there and how they were set. You will not get a pure sound from this because of that.

Hola amigo saludos desde latinoamerica Perú. Una pregunta es la nueva presentación la nueva versión de tribit stormbos blas ???🤔🤔

@matus3303

Ай бұрын

Hi, it is not a new version. Just a modification I did