Boom!! Great idea for a video ! Very helpful thanks !

@R.N.GPerformance

3 жыл бұрын

You’re welcome buddy.

Thanks for all your help

Thanks for all that great info.

@R.N.GPerformance

3 жыл бұрын

You’re very welcome 😉

Just ordered the grease gun you had from this vid. Hope you get your share!

@R.N.GPerformance

Жыл бұрын

Thank you 🙏. I love this grease gun

I like the color of that moto!

@R.N.GPerformance

3 жыл бұрын

Thank you. Absolutely amazing orange color.

My Yamaha 1100 motorcycle I had the same battery for 12 yrs. I'm on my second battery and my bike is 19 yrs old. It's always stored inside with a battery tender on it. Buy a tender it will save your battery. Ps I live in northern Illinois. So yes it sits through the cold many months.

Nice job. Very informative.

@R.N.GPerformance

3 жыл бұрын

Thank you 🙏 i try.

Good stuff Thanks

@R.N.GPerformance

Жыл бұрын

Yw

I lived in Superior, WI (Home of Amsoil) and actually hauled it for 8 years. Great stuff. Had a beer one night with Al Amatuzio the founder. Great man, fantastic story. I wish they'd update their website, as i don't see any listing for a UFORCE 1000. I do however doubt you'll find Amsoil cheaper than t6. Even at $8/ quart that's $32/gallon. T6 runs about $21/gal at Walmart. Mic drop. (Lmfao just kidding). I like your honesty on the Amsoils tho, because I too have had and had dealers where I deliver tell me certain types don't do what they should, which can be a little scary if you're not sure. Another trick i use is to use a different color grease than the stock so it proves it's been greased. Like kubota tractors painting their filters grey, they know if the filters were changed from stock. Good to know info on the air filter. I appreciate your time in your videos, I'll be subscribing and I'll be shooting more videos of my 2021 uforce 1000 as I learn and use it more, and will gladly give you a shout out in them. Take care

@R.N.GPerformance

3 жыл бұрын

Yeah they dont have a listing for the uforce 1000 but any of their ATV oils will work. When i said cheaper i meant cheaper to change the oil the machine takes 3 quarts its like 24$ to buy a gal of t6 here its 26$ but your right you get 2 extra quarts for your money. You’re welcome buddy thank you for subscribing i hope you enjoy watching and definitely enjoy your machine.

@R.N.GPerformance

3 жыл бұрын

That’s pretty neat. I dont watch nascar but thats still awesome.

My fleet mechanic buddy is also an ATV mechanic originally by trade and uses Rotella T6 15w40 in his Personal machines and the company wheelers. All Honda’s. It’s JASO MA 2 rated. I would buy amsoil over the rotella myself but if I was in a hurry and needed to change it I would use Valvoline or Rotella in both my Kingquads. I’m not sold on air filters that need to be oiled. Project farm KZread channel testing filters sold me on Paper over oiled.

@R.N.GPerformance

3 жыл бұрын

Paper filters are fine until they get wet. Thats the only thing with them. And some paper filters arent the best same as oiled.

Hi Steve! Hope your weekend is going good. Do you have a recommendation for new coolant for our CForce 500's? Thanks 👍

@R.N.GPerformance

Жыл бұрын

We recommend Autozone orange. Thank you same to you.

Thanks for this video!! Most of my zert fittings are clocked where I can’t get my grease gun on them. Is there a torque spec if I need to tighten or loosen to clock them to gain access?? Sorry to be such a newbie.

@R.N.GPerformance

Жыл бұрын

Your fine buddy. Just till they snug up and stop turning. It don’t take much.

Good job on the video, but I might disagree on the Amsoil gear lube. Pretty good stuff but typically I see automotive gear lube foam up when it gets water in it. We use Amsoil Marine Gear Lube in the boats and never have had any foaming up, but have using their automotive line. I'm brand new to my 2021 Zforce 800 and first fluid change out I'll try the Amsoil Marine Gear Lube. I've used all there products in my service trucks and in boats for well over 25 years now. And, I agree, very good products! Yes, API GL4, GL5

@R.N.GPerformance

3 жыл бұрын

Give it a shot. I haven’t tried the marine stuff. But i have tried the other stuff and it just foams up. No water in my diffs we were riding all road at those times of testing. I switch to valvoline and haven’t had a single issue out of either machine. Ive been told by racers they had the same issue aswell. Maybe their marine formula is different im not sure. Let me know how it gos i am curious. Thank you for your comment and information.

@businessgalmukoff4716

3 жыл бұрын

@@R.N.GPerformance Thank you, I'll let you know. I'm going to go ahead and change it all out now with only 40 mins on the machine. I'm not sure what they use for lubricants in Wuhan, maybe bat urine so I'll break it all in with Amsoil.

@R.N.GPerformance

3 жыл бұрын

@@businessgalmukoff4716 it never hurts to change all the fluids to a good brand fluid.

Do you use synthetic marine grease for your zerks? Seems like a lot of people are recommending that

@R.N.GPerformance

3 жыл бұрын

Honestly i just get regular marine grease. Synthetic wont make a huge difference but definitely wont hurt either.

How do you adjust the rear shocks, My 2017 800 rides great , my 2021 bucks like crazy

@R.N.GPerformance

2 жыл бұрын

Buy elkas. Lol I’m sorry it’s the truth. Stock shocks suck. Hesters motorsports sells an amazing package.

Which diff oil for limited slip diffs? A lot machines in EU come with LSD in rear.

@R.N.GPerformance

3 жыл бұрын

You can use this same oil but will need the limited slip additive to go with it.

Tell me about belt break in. This is killing me. I may be on my second belt at 240hrs.

@R.N.GPerformance

8 ай бұрын

Message me through my website www.rngperformance.bet we can figure out why you may be going through belts. My wife will get the message just tell her RedNeck asked you to message and she will pass you right over to me buddy.

I just purchased a 2021 Cforce 800XC. It's shuts off at 5 bars on the temperature gauge and sometimes has issues at 3 and 4 bars. I remember one of your other videos and still searching saying the factory coolant is not good. Do you have recommendations on coolant? I was recommended engine ice. Wondering how it compares to Maxima Coolanol or anything else.

@R.N.GPerformance

2 жыл бұрын

Anything but the Chinese coolant will be good. I personally use Autozone orange 50/50

Can you make a video of a hard rock crowling in the cfmoto

@R.N.GPerformance

3 жыл бұрын

In july i am

Steve where can I get good parts for my cfmoto, I'm new to them, and have an issue I don't have a manual for my 800ex

@R.N.GPerformance

3 жыл бұрын

Main Street cycle check them out on Facebook. Also in ZForce nation on Facebook you will find a manual buddy.

Can't wait for the bearing video.

@R.N.GPerformance

3 жыл бұрын

It will be coming shortly. Im waiting on a grease tool. I thought i had a tool for our motos and i dont.

@jimmyspencer4019

3 жыл бұрын

@@R.N.GPerformance when it comes to the moto your the man with the plan

@R.N.GPerformance

3 жыл бұрын

Thank you sir.

@jimmyspencer4019

3 жыл бұрын

@@R.N.GPerformance no thanku for the info

@R.N.GPerformance

3 жыл бұрын

You’re welcome

Do you have a video of your exhaust

@R.N.GPerformance

Жыл бұрын

I do Dual Exhaust How to DIY for CFMOTO ZFORCE 800EX kzread.info/dash/bejne/o31sxbuyg5eTedI.html

Believe it or not, my new KRX 1000 has zero grease fittings. I was quite surprised.

@R.N.GPerformance

3 жыл бұрын

My Kawasaki dont either man. Sucks.

@atcdan133

3 жыл бұрын

@@R.N.GPerformance I saw there are kits made to add zerks but you have to drill into the A arms. Not sure if I want to do that. There are quite a few units on the forums with 2000+ miles on them and no issues though so who knows. Hey, also, I watch a lot of youtube. I respect the amount of work you are putting in at getting your channel built. Keep it up.

@R.N.GPerformance

3 жыл бұрын

@@atcdan133 yeah you can buy the kits. Its easy to do honestly. Kawasaki uses good bushings so not a huge deal but still nice to have. My brute force is still stock zero issues so far. Thank you it sure is allot of work. But well worth it to be able to help others.

@apinkbunny67

3 жыл бұрын

Sorry Kawasaki don't believe in Grease fittings. That's the first think I noticed going from a kawasaki to a cfmoto.

@R.N.GPerformance

3 жыл бұрын

@@apinkbunny67 right. I was shocked CFMOTO put as many as they did.

What happened to the golf cart build?

@R.N.GPerformance

3 жыл бұрын

Its on hold. Engines are too expensive right now

Hey Steve, Do you recommend Twin Air air filter? Would you put it in you’re machine?

@R.N.GPerformance

3 жыл бұрын

Absolutely not. Ive had bad luck with those over the years.

@johnduran4949

3 жыл бұрын

@@R.N.GPerformance awesome Thank you!! I really appreciate it

@R.N.GPerformance

3 жыл бұрын

You’re welcome

@R.N.GPerformance

3 жыл бұрын

@@johnduran4949 you’re welcome 😉

@johnduran4949

3 жыл бұрын

I just ordered my Uni 6229 st for my UForce 500. I will return the twin air junk! LoL. Thanks again Steve!

I just put rotella t6 in my 800 ex

@chadellison5875

3 жыл бұрын

Thinking ima drain that rottela out. Can find 3 quarts of UTV oil around here in one freakin store unless I pay at dealer. I love the dealer but damn is high.

@R.N.GPerformance

3 жыл бұрын

@@chadellison5875 they sure are. Its crazy.

nice video

@R.N.GPerformance

3 жыл бұрын

Thank you 😊

Your Information on rotella t6 is incorrect. It is wet clutch certified. Hi levels of zinc and phosphorus for a high shear. I've run it in all my equipment and atvs without any issues at all. Not bashing amsoil, nothing wrong with it but if your on a budget or amsoil is not readily available in the time frame you need it rotella t6 5 40 is very safe option.

See waht you did i buy an ari filter now this is on you lol

@R.N.GPerformance

3 жыл бұрын

😂 I’m sorry our machines need government assistance 😂

Have you done a belt change. If so what's the part #

@R.N.GPerformance

3 жыл бұрын

40g3691 gates.

@chuckvancour8881

3 жыл бұрын

@@R.N.GPerformance thank you . You have been a great source information for me Thank you

@R.N.GPerformance

3 жыл бұрын

@@chuckvancour8881 your very welcome

Hellow i have a cf moto z6 2013 can i increas its speed?

@R.N.GPerformance

3 жыл бұрын

Not really. Keep stock clutch and go up a size on tires thats about it.

@michelfaysal8932

3 жыл бұрын

@@R.N.GPerformancei have a problem in it when it heat up on the dash board it puts R and H how to fix it?

@michelfaysal8932

3 жыл бұрын

I drive normaly when it heats up it put R with H

@R.N.GPerformance

3 жыл бұрын

@@michelfaysal8932 ?

@R.N.GPerformance

3 жыл бұрын

@@michelfaysal8932 adjust shifter linkage