They Banned My Probe!
Ғылым және технология
And here's what you can do about it
Announcement: tm-alliance.org/blog/2023-03-31/
Click to subscribe! ► bit.ly/KLabs_sub ◄
The recent "retirement" of 10:1 and 1:1 probes and what you can do about it.
Twitter: @DanielBogdanoff:
/ danielbogdanoff
#oscilloscope #oscilloscopes #electronics #electricalengineering #computerengineering #oscilloscopeprobeban #probeban #EEVBlog #10xprobe #1xprobe #aprilfools #keysight #oscilloscopeprobe
Пікірлер: 92
The 0:0 probe is really the way to go, it's wireless and has an infinite reach, due to the dynamic nature of the X0 probe it can handle infinite voltages as well as provide the lab with a quick and simple 0V reference. These probes also will never need calibrated as they have an infinite precision, combined with a $0 BOM cost they are the perfect alternative to traditional probes!
@KeysightLabs
Жыл бұрын
Hard to argue with that logic
@leyvarecio3699
Жыл бұрын
Does it work with a turboelectroencabulator I bet not
@linuxguy1199
Жыл бұрын
@@leyvarecio3699 Of course the X0 probe can integrate with a turbo encabulator, this is obvious due to the phase velocity of the magneto-hydro-dynamos integrated into the reduced reluctance, infinitesimal admittance properties of the X0 probe!
@leyvarecio3699
Жыл бұрын
Well I think I didn't put too much attention in my magneto-hydro-dinamo III class such a rookie mistake my apologies
@rajaanquarza8553
11 ай бұрын
Now i just need to find one...
I could never figure out if the 10x setting was decimal, binary, or hex. So difficult for engineers. Glad they are simplifying this complex setup process for us.
@Anvilshock
Жыл бұрын
It's trinary. -ish.
Great for hard to reach probing locations, recommended!
At first I thought you were going to solder a really big resistor into it or something. Then it got even better!
Sales of 1:1 probes is set to skyrocket! Happy 01/04.
@KeysightLabs
Жыл бұрын
To the moon!
It's moebin time. Also here's the announcement: tm-alliance.org/blog/2023-03-31/
Kudos for joining in on Dave's prank!
Amazing idea, these life hacks just keep getting better.
if they had actually banned the x1/x10 probe, this would make a compelling video response for them to reconsider their announcement on the socials xD
Be careful with that Moebius probe, if you use it to measure signals with high frequency content and accidentally hit the resonant length or a multiple of 1/4 wavelength the standing waves could cause it to self oscillate and create a wormhole which an MSO might fall into and end up on my bench* * Gotta try...
Hope the exit of the 1x/10x is the April Fools joke.
Fantastic ideas both of them! I think I'll throw my 1:10 probes away and just order several 1:1 probes to be in compliance!
I tried it myself and it worked great! I also tried to put me in series to the probe to also get a high impedence and it worked out aswell. Good for >5GHz
The Mobius probe: Great way to check your scopes noise floor!
I actually wish the end of switchable probes wasn't an April fool joke. It's not just a matter of buying separate 1:1 and 1:10 probes because good 1:10 probes at reasonable price just don't seem to exist. I ended up making my own instead.
No way.. This must be an April 1st joke! 😁
I just use hook up wire and Blu Tack with my 1 GHz DSO. Probes it came with didn't seem to want to plug in. Someone once said something about twisting a barrel but I never got around to having a look.
No worry, we always have the Keysign official original replicated version from Chaina
That’s quality content that I expect from Keysight 👍 I guess we also will get the new MegaZoom 6 shipped soon?
Happy April 1st guys
I did this to my flux capacitor, and instead of going back to Nov 5, 1955, I went back to Nov 4, 1944, in the middle of Europe, so thanks for that...
1:33 LMAO, That wasn't supposed to come out!
Happy April Fools' Day to you too!
throw in a bnc Y-connector in the möbius probe and you got yourself a Klein probe. now you can measure signal in 4th dimension. 👍
You know....I forgot what day it is....
Great idea! Same big thing as an scopenner! We are look forward this stuff 👍
Instructions unclear, observed 190° phase shift
Technically that's not a Mobius probe - that is an Ouroboros probe;)
@Anvilshock
Жыл бұрын
And a differential Ouroboros probe would be an Auryn probe!
You got me going there for a sec.
probius strip?
I love this. Perfect solution
Oh it's April... I had to look at the calendar ;D
I was obvious by the title but I'm glad you are having fun on 1st of April :)
Ingenious! 😉
Is it true that your scope runs entirely on recycled electrons?
@KeysightLabs
Жыл бұрын
We actually make all of them fresh from scratch
The first day of April ;-) Probing...
Hahahahaha that's awesome Dan. It tops your noise on a psu impression
Yo! I need 10 of the Probius!
Wait, what the... {looks a the calendar}... ARG!!!
Just send me your all contraband scope probes! problem solved. If they're already packaged with oscilloscopes, no problem, I'll still take them :-P
I like the one of TMA's claims that having separate 1x & 10x probes will reduce climate impact over having a single switchable 1x/10x probe. Follow the science. It's settled. "Environmental Impact Reduction: By eliminating the need for additional switch components, the production of fixed x1 and x10 probes can contribute to a reduction in electronic waste, aligning with global sustainability goals and promoting responsible manufacturing practices." Happy first day of April :)
1000 degree phase lag here we come
Bob Finger.. just lol 🤣🤣
Fantastic 😂😂😂😂😂😂😂
how about making a adapter that would convert a 1x to a 10x probe. All you need to do is move the circuit for the 10x option into the adapter part and you now got 10x probe, remove the adapter and it a 1x probe.
@KeysightLabs
Жыл бұрын
Ooh, you could build it right into the probe and put a switch on it to go back and forth
Can I exchange my old 10:1 probe for the new system? I will pay shipping.
an amazing april fool 😂🎉
HAPPY APRIL 1ST HEHEHEH
Oh the guys in white shirts and ties from the glory days of HP are turning over in their graves! But it's so much more fun today! LOL!
Yeah that's a lot better . Great .
@techdoc.repair
Жыл бұрын
Cuz ya know a switch with two positions is sooooo difficult kids today are offended.
Now.. do a Klein probe. G'wan.. I dare ya.
2-1/2 minutes of my life I will never get back ;-)
@Anvilshock
Жыл бұрын
2-1/2 minutes of life well spent!
Why seeling one probe 1/10 at a decent price when they can sell twice as much .
He slipped and said, “we can sell twice as…” I mean… All th craporations are turning into Apple.
@KeysightLabs
Жыл бұрын
Yeah phew that was a close one
You can't sell 10x probes when they are built in to the free one that comes with it.. brilliant. I hate it
May be an April's fools joke, but I'm afraid, it's not...
This being released on this date tells you all you need to know.
LOL @ 1:35 the truth comes out!
But wait, that idea is flawed....
@KeysightLabs
Жыл бұрын
Funny thing that
Like banning gasoline cars...
Who wouldn't want 10x probes instead of 1?
@KeysightLabs
Жыл бұрын
Right!?
Ha ha, April Fool’s Day 😆
Good joke 🎉 1:1 probes wont multiply , they are just like the straight wire
Ahhhhhhhh you. !
That's the silliest thing I've seen in awhile. If people are confused by a 1:1 vs 10:1 switch... this isn't making them less confused. So whoever "we" is in this video, "they" should be really mad at "you" right now. Whereas, the company that made my oscilloscope isn't "banning" anything, they sell all the normal tools that there is demand for. Honestly, if you're confused by a 10:1 probe... do you even need an o-scope? Maybe just use a logging multimeter?
@veryboringname.
Жыл бұрын
I think you're missing one key point here...
April 1st yourself.
Seems like an April fools joke. Saw eevBlog's video on this probe change.
You might have done a fake giveaway
@KeysightLabs
Жыл бұрын
I'm not a monster
lol
The truly scary thing is that the 10:1 ratio is ACTUALLY confusing and WAY TOO FUCKEN HARD for too many people in positions of influence.