Worker darts: Drac, a box cutter, and a crate of Dart Zone darts: I'm about to end this man's whole career

9:23 You hit a worker dart ricochet with another dart lol

@svxnation6192

5 жыл бұрын

No seriously I saw it too he hit one bouncing back off the brick wall

@TheDaedalus07o

5 жыл бұрын

I saw it too you hear one trigger pull and the first dart bounces off the wall then you hear the second trigger pull and the dart that was falling from before goes flying up to the left. It's insane I rewatched it like 10 times

@Nokia-py6fg

5 жыл бұрын

#dudeperfettrickshot

Y'know, I was stressing about not having darts ordered from China for Endwar this year, but after this? I'm just gonna clear walmart's stock in Atlanta Haha! Great video man! Thanks for testing these! You hit 10 shots out of 12 darts if you count the dialing in shots, which I'm gonna :P

@froogy9218

3 жыл бұрын

Lol

But... What about Steven the zombie? WHAT DID YOU DO TO HIM?!

@whatstdiggn

5 жыл бұрын

Hes shambling to end war.

@beanieteamie7435

5 жыл бұрын

He was stolen.

@hyperjohn6627

5 жыл бұрын

No, I think drac just couldn't hit him with the truth...

@froogy9218

3 жыл бұрын

@@hyperjohn6627 "its jot you steven, its me"

Walmart here has those darts 5 bucks a box. May check you local Wal marts.

It's funny how he keeps saying springer when the esper is clearly a stringer

@orbit9237

3 жыл бұрын

I know right

I reckon that the dart zone darts get a higher fps from the flywheels because the whole dart head and all is making contact with the flywheels

@abquintic

5 жыл бұрын

The foam is also pretty stout, so it may behave as though at higher crush than it is.

Nfstrike makes a dart cutter if you want to cut those adventure force darts well

@archerpence

5 жыл бұрын

Nice shout out. Buying one now, lol.

@octosquid9918

5 жыл бұрын

U can get files on thingiverse to

@itchyprince3793

5 жыл бұрын

Octosquid 99 no.

I like that there's a tune that plays when the FTL starts up. A very fitting tune for a Drac.

I love your style so much drac, i don't often watch your videos but when i do it always makes me smile^^

can you do a video on E kind waffle head darts vs adventure force waffle head darts

Yo drac I've been trying to find a nerf event around my area (I live bout 5 mins from the Ohio river in West Virginia) and I've heard you mention some people up in Ohio is there a way I can get some more information?

How are the Adventure Force darts doing in an air blaster (Buzz bee maniac/berserker/bog blast/simba x-power shocker (all the same)) and a 1/2“ schedule 80 pvc 40cm barrel?

Gen 2 Workers have had trash glue since they were introduced. From what I've heard from Bradley Phillips, more recent batches of the already better glued Gen 1 Workers have great glue on them. He also did a good comparison for Workers vs cut AFs for flywheels. Generally darts will last longer out of a springer just due to the fact that the wheels aren't wearing on/squishing the darts and weakening the glue bond. Impact compression on hit is still a wear factor though.

@tategeiger5317

5 жыл бұрын

Anybody who enjoyed this video should definitely watch brad's

what is better for tier 0 stryfe with aurora cage and inferno flywheel? Half length or full length dart?

Hey drac I wanna ask how will you make the slasher 76 gun on nerf

Does anybody know where I can find Nerf events on the Eastern shore of VA or in VA at all?

Was at the store today debating about picking these up. Looked up this video in the store and bought them immediately.

Now the Revoltinator just needs to come out and someone needs to make a half-length adapter rig for it and i'll have my dream setup :D

@sirbrick3517

5 жыл бұрын

www.thingiverse.com/thing:2867985, This is a link to an adapter for an RS/Stryfe, It would not require much work to turn it into a Revoltinator adapter, and you could have your dream loadout pretty fast!

For as much work as we put into our blasters, it sure is great that we finally have a dart that surpasses the rest by obvious measures. I've tested so many random darts now, it's really perturbing, because they all seem to react different to different blasters, and I find it annoying that even within the same catagory of blaster that darts will perform differently due to pusher rods or barrel contacts, etc. I'm a flywheel guy, and after that a hammer guy (hammershot, doublestrike, etc., as backups), so finding the darts that are most compatible with my setup is starting to become more important than my next blaster because I want that accuracy, I want that reliability, and I want that predictability. I loved your test, as foam flingers we dont need highly scientific tests to prove what our blasters and darts do, the proof is in the headshots, in this case, and you've definitely achieved that. Thanks for what you do, been a fan a long time now because of content like this!

NFStrike already sells a rig for dart-cutting... all ya need's a utility-knife blade and you're good to go.

How about the half length accufakes? Are they accurate and what is its fps?

@Stryker5260

5 жыл бұрын

This should give you an idea compared to Workers at least. kzread.info/dash/bejne/qqZ2x5RsgNrahLg.html

Glue domes (the one's Stefan originally designed) are actually 22 years old in the NIC.

Worker darts are the false truth

@KellenBluestein

5 жыл бұрын

For flywheels, yes, but the adventure force dart heads get stuck in springers, so worker wins in that category

@curledvermin1177

3 жыл бұрын

@@KellenBluestein not precisely, that barrel was mainly the problem, was too thin. And to solve that recent they released half-lengths that are thinner.

@KellenBluestein

3 жыл бұрын

@@curledvermin1177 waffle heads have a head the same width as the body, so they get stuck or slow down in a sealed breech system

@curledvermin1177

3 жыл бұрын

@@KellenBluestein they work fine in my blasters

@curledvermin1177

3 жыл бұрын

@@KellenBluestein better than any other dart

there is a jig to cut down a bunch of darts with a razor knife super easy and fast, you can get at nf strike and blastertech

What about in Hoppers like on bloodborne?

Lol can ya’ll not clear store shelves? You know you’re not the only ones who need darts 🤣🤣

How do you cut these down? And what size how do you get it precise?

@heavydrizzle4472

5 жыл бұрын

Stephan darts are generally 3.6cm as opposed to the 7.2cm of average nerf darts. I've been using a simple guide I made out of a piece of cardboard and some duck tape and cutting them with a razor knife or box cutter. You can also find 3d printed guides to cut them very accurately and fast online, I actually just ordered one last night from foam technician for about 10 dollars with shipping to the US. I just started playing around with short darts last week and they are honestly a huge step up in terms of accuracy because the length of regular darts tend to make them start wobbling in the air, you can pretty easily see if you fire a few and look for the wobble. I would suggest reading a few threads or watching a few videos on them before you cut any of your darts tho because it should be noted that at the very least you'll have to remove your dart posts to get the half lengths tight into you barrel. Generally you'll want to take out the air restrictors on most blasters firing them as well because since they're shorter they have to be very far back to depress the AR. For mag fed blasters it take a bit more work and usually some new parts, you'd need a new mag to fit short length darts, a mag well receiver, and a new dart pusher on a lot of model blasters as the pushers are meant to push full length darts. So far I've only been messing with front and breech loading blasters so my word is deffinetley not gospel. The first thing I tried it with, and what I'd suggest, is starting with something small and cheap like a jolt, all you'll have to do is use some pliers to twist out your dart post and cut some darts to the 3.6cm length. Just make sure you push the darts all the way in so the air restrictor is open completely. The difference between dart lengths is instantly noticeable and your blaster will still be able to fire full length darts. It's deffinetley a fun little project that's very simple to do, hope this helps!

@sirbrick3517

5 жыл бұрын

www.thingiverse.com/thing:2708582 Here is a link to a piece that lets you cut them down really simply with a razor blade.

What gun is that?

How much and were ho wait Walmart and I have 500 adventure force darts

8:55 bowling pin lol

Wow those hitmarkers were awesome!

Yeah, I've been using these since I found them too.

Dart Zone. Well done :). Love ya Drac, and credits to your camera operator :D

Very helpful video.

What length are half lengths specifically

@sirbrick3517

5 жыл бұрын

They are quite literally half the length of the standard elite dart, which is just under 3 inches, so just under an inch and a half for half lengths.

@SD18-videos

5 жыл бұрын

Sir Brick half the length of foam or total dart?

@sirbrick3517

5 жыл бұрын

Half the length of the total dart, here is a link to a cutter for darts to help give you an idea: www.thingiverse.com/thing:3636875

Dartzone darts: more accurate than acustrike darts. Accustrike darts: *am I a joke to you*

@liamsomeone6333

4 жыл бұрын

you butchered that meme

ok but what short darts work best with springers then if that's all you have?

@Stryker5260

5 жыл бұрын

Workers are still currently the best short dart for springers. Drac showed a Gen 2 Worker, which is know to have really bad glue compared to the yellow Gen 1 Workers. Workers will also be more durable out of a springer since flywheels compress the dart between the wheels, potentially weakening the glue bond.

@Stryker5260

5 жыл бұрын

@@pyschohippymofo I will admit my only 2 boxes I've bought weren't glued the best, but that was about 6 months or more ago. Just passing on hearsay, sorry.

@Stryker5260

5 жыл бұрын

@@pyschohippymofo Yep same, my reglues seem to be holding up. I tried some of the Sweet Orange darts from OutOfDarts, they hold up a heck of a lot better but have nowhere near the same consistency as Workers. I have to run around 1/6th more turns on my Caliburn SCAR barrel to get any accuracy and that just kills the range.

@MrMiraculon

5 жыл бұрын

@@Stryker5260 if that's the case, what glue works the best to fix the worker darts when a broken one comes up? (ie elmers glue or standard super glue based on chemical reaction to the foam or rubber) Because I am very patient and would even re glue all 100 darts if I have to.

@Stryker5260

5 жыл бұрын

@@MrMiraculon I used super glue by itself, but wouldn't recommend it since when cured it can make the surrounding foam and connection brittle. This video ( kzread.info/dash/bejne/moGDrqWbgqrSkqg.html ) in addition to being a great comparison vid, has a link in it's description showing a very good way to use a combo of contact cement and super glue to create a very strong yet flexible bond.

I have a challenge mod for Drac, and that is a hammer shot mega

Speak it brother! I buy a box every time I go to Wally world. They're consistent as all get out.

I am glad Wally's carry these awesome darts!

Dang, those DZ darts are on point. That was like what...80% accuracy (if you include the other two shots for lining up it comes out to be 75). You'd probably have to shoot 100 or 1000 to get a more accurate assessment, but they're true to hit that's for sure. And they hit hard as well; moreover, they're cheap! I think I know what I'm getting from now on.

What if it’s the blaster?

The adventure force darts don’t like to work in brass breech longshots. :( even if they are cut in half

It does feel like June here in Georgia, doesn’t it?

Lord Drac Super sweet comparison video. Thanks for taking the time to do this test.

Nice shooting Kat, rather sneaky halo reach reference there...

use a piece of kanthal as a foam cutter and make a jig to glide them a cross

"I've nerfed in Canada so I'm a big fan of [incomprehensible]" please explain what we do up here, I wanna know. I'm sure if I wasn't in an area with no wars I'd probably know, but the nearest active Nerf community is 3 hours away.

10:19 - 10:26 : the sound the rock makes when getting his chest hair waxed.

Oh man I love these darts

See you in MN tomorrow

I think NF strike has a cutting tool for making half darts, by worker, no surprise there

@sirbrick3517

5 жыл бұрын

www.thingiverse.com/thing:2708582 There is this too, it is really good paired with a razor blade to cut

If only the were as awesome in closed breeches as well, now we still need two dart types

You should make the mega centurion shoot rival balls. Please like and comment so Drac can see it!

@devon8419

5 жыл бұрын

No point, the edge jupiter is on it's way

@boostaddict_

4 жыл бұрын

Besides, the Centurion is garbage. Cool shell, good for integrations. But garbage internals.

9:23 dart hit another dart

Bro , which nerf gun was that ? Please reply

Lol now we just need hvz places to allow cut darts and will be all good

I just got some of those

Help get drac to 1mil subs!!

Yes

I have these darts to! These are way better than elite nerf darts ,and there way cheaper!

"And these are the Worker darts we've come to know and tolerate." I laughed. But still in use by default because of the price/accuracy ratio. Buy Adventure Force darts in the 500 pack plastic bins (with handles) at $20 a bin, buy two bins for free shipping, 1,000 darts from Walmart.com for $40 plus tax, delivered in 2-3 days. Too bad they don't feed reliably in tight spring air blasters, otherwise that would be the one size fits all solution.

I guess Steven and Teddy have been replaced

Too bad adventure force darts don't work well in springers. I'm gonna have to stick with worker darts since I run mostly springers.

I bought these 2 weeks ago I thought they were too good to be true.

4:31 is this a reference to halo reach

Puts white worXker dart up against white arm, only sees dart head

These darts are the truth! I have been using them since I started without even knowing that they were the best dart. I really only used them because they were a cheaper option than the Nerf Elite dart, but once I found out that the Elite dart is worse by buying a box of the damn things, I felt lucky that my ammo collection is based on the adventure force darts instead of the nerf darts.

Walmart has sold those for $5 a box of 200

Best Line...I quit caring!

why is the link nerf fortnite?

" I can put it in front of my WELCOME TO THE GUN SHOOOOWWWWW>>>!!!!" Probably for the best I dont make these. Ill see myself out.. :D :D

drac the impaler

Draw buddy those pants are to lose you got show off you greatest asset.

Caliburns dont like adventure force or accufakes. I dont know why seeing as how theyll drop outta the front od the barrel if you tip the damn thing forward. Also foam technician sells a dart cutting jig for the correct price if you don't want to pay nfstrike 45 dollars for the worker one. Or just have igor conjure one up for you. Use the black high carbon steel OLFA blades though. I get mine at home depot. They cut through foam like it was foam. They dull quickly but dont smoosh the dart up. Also glue blown off worker heads onto extra halfnof adventure force foam. Also strop the razor and youre good basicslly forever.

@whatstdiggn

5 жыл бұрын

@@pyschohippymofo theres one thats listed up at 45. Ive only vever found the 15 dollar onw twice. Although i seem to get a different site 15% of the time. When i first found it a year and a half ago and recently this month. Its so strange. Today its back to what it was before and half their dart selection has vanished. They had accufakes with gray or orange heads in every colour. Now they don't. Also the 15 dollar cutter was gone today when I ordered darts and was looking through the gel ball parts to get a cheaper full set of stampede gears.

@sirbrick3517

5 жыл бұрын

Oddy enough my old Caliburn worked with Accufakes, no clue how or why.

@whatstdiggn

5 жыл бұрын

@@sirbrick3517 i use workers janky scar barrel. Maybe thats why. How long is your caliburn barrel? Did you get your caliburn from captain slug? If not maybe your barrel is a tad looser.

@sirbrick3517

5 жыл бұрын

I didn't have any additional rifling/barreling on mine, I did get it from CaptainSlug

Could try to modify the boomco halo assault rifle. Either make a nerf version or modify the boomco one.

saw bradley phillip’s video before this and it’s good to confirm those findings through two different people. now i just need something solid for springers besides the worker darts

thery good gun !

Make your arenal rewiew

Working makes a thing for cutting darts down

Bro it’s DART ZONE

You should mod a stryfe to fit half length darts

@madelynwillet668

5 жыл бұрын

It’s really easy. Just add a extended pusher it’s like 5 bucks.

@myloraffaele-hamar

5 жыл бұрын

@@madelynwillet668 cool thanks

@sirbrick3517

5 жыл бұрын

You can find files on thingiverse for the adapter as well as the extended pusher

@madelynwillet668

5 жыл бұрын

Mylo Raffaele-Hamar I can show you if you want.

Drac: steals Bradley Phillip's video Everyone: Me: jk jk EDIT: then again, it could be everyone thats doing a vid on them and ive only seen Bradley Phillip's

Chicken reference in the title?

These darts don't work in my mediator

Canadadadadadada.......

I wonder how the SPAMF would take Dart Zone darts

@asliceofnerfpizza8549

5 жыл бұрын

Pretty sure it uses the same barrel material as his esper.

@carsondiaz667

5 жыл бұрын

@@asliceofnerfpizza8549 He changed the barrel material from PETG to something. Not sure what.

@asliceofnerfpizza8549

5 жыл бұрын

Still a closed breech, don't think it'll work

@carsondiaz667

5 жыл бұрын

@@asliceofnerfpizza8549 Well my theory is that since it's a pusher style breech and it's pretty loose without the tightening rings at the front that it will push past the tightness. Maybe I'm stupid

I'm really glad you've stepped up the production quality of your videos, but please learn from the other nerf youtubers out there who actually make edits for their videos. I get that it's easy to just stand there with a camera and talk, but I know that all of this information could be more easily conveyed in much less time, and it would be more clear. I get that you're playing with the youtube algorithm, and making videos at least 10 minutes long makes you more money from ads, but please try to cut down your videos more and record more b-roll to cut too. I'm glad that you are learning how to make hit markers, but try watching one of Out of Darts videos and see how they differ. Editing is your friend. Sometimes you should record things more than once so you can cut between them. I know you didn't go to school for film, but you've been doing this for 10 years and your content has come a long way. I'm hoping that you can take further steps to make your content that much better. Keep up with the consistent content and I hope changes come in the future.

Drac, you forgot to say u can kill people with them

You can get 200 Stephan’s on amazon for 17 dollars

Remember when this mans wore a mask

Lol you actually did it

307th, also I have those 200 darts.

just gonna leave my comment here

Aaaaaaand now they make half length

@thetinytatertot3806

3 жыл бұрын

Fr

@randomdudethatplaysviolaon1903

3 жыл бұрын

Lol

Hi

So early damn

@bharafelder

5 жыл бұрын

In first wow

Hello

5 cents a dart hehe not for nerf darts