So happy I found your video, literally installing them and thought I needed a hub(got a pack of 6). MB only has 2 fan hubs you pointing out the daisy chain just saved me time and $.

@Ravie.

2 ай бұрын

Are you able to diasy chain more than 3

@shizouka7088

2 ай бұрын

​@@Ravie. the description of the fans says u can daisy chain up to 5 fans, just 5

@Angel-em6od

Ай бұрын

Hi, how many fans did you daisy chained to the argb port?

@shizouka7088

Ай бұрын

@@Angel-em6od i daisy chained 3 fans back then but you'll really need a fan hub along the way so buying even a cheap one would be ideal since you can connect up to 10 fans in there, it's around 3-5 us dollars, it's cheap.

@Angel-em6od

Ай бұрын

@@shizouka7088 Would it be safe to connect 4 fans in series if I don't have a hub?

Why does this guy not have more subs? You tackle all major concerns consumer have for every video you do regardless of the content. Good job..

@RacingPotato12

4 ай бұрын

Because all his videos are over the top product ads. He never provides any useful information.

@Legendarylynx622

2 ай бұрын

He does have more subs. This is the high speed version (so clips from the longer videos) of another much bigger channel

I'm a big fan of these fans, pun intended. I tried them out when I built a PC for a friend last year on a budget. I have compared specs with a $70 Lian Li 3 pack and the Thermalright fans have significantly better static pressure and flow rate, while actually being slightly quieter. I will concede that the Lian Li fans may look slightly better but not $55 better. Depending on the case, you might not be able to tell anyway. Certainly wouldn't be able to tell in a case with a proper high airflow mesh front. Cannot overstate the benefit of 'daisy chaining', ripped off from Arctic's PST. If you are using 12 fans, I wouldn't plug them all into the same power header though. Even a midrange board tends to have 3 system fan headers these days. Doesn't matter for the ARGB connections and I'll use just one even if there are 2 on the board. LEDs aren't going to overdraw the header or wiring but you hook up enough fans to one header, you might burn something. Probably the daisy chain connectors because you'd be drawing 12 fans worth of current through a single point through a connector that was really only designed for a single fan. I'd say 3 on one header is probably a sensible limit. Another fun thing you can do is piggyback the rear fan off the CPU fan header so that it runs in time with the CPU cooler. Pretty much a straight shot there and it is dumb to have that rear exhaust fan moving less air than the CPU cooler, which can happen on a lot of boards, depending on design and how they are set up in BIOS. The air stacks up, gets turbulent and impairs the extraction of the GPU heat out the rear vents and top screen via positive pressure from the front intake fans. I think on a lot of newer boards, the sys fan header nearest the CPU is set to run at the same speed as the CPU fan. This is but one of the many reasons why just slapping a PC together and running it for all of 5 minutes before packing it up and shipping it out the door is a horrible practice but is followed by all major SIs and the majority of smaller volume and custom builders. You can get a decent prebuilt or custom as long as you buy it from me or one of the half dozen other builders on the planet who go the extra mile and then drive a few more hours just to be sure. 'New' just means a component that has had very little testing. Used is actually often a better bet. I've seen too many new parts DOA or fail quickly due to poor QC. I just used these fans again in a build for sale yesterday. R5 2600/RX 6600. 3 fans in front, one in back and one on the cooler. PC runs cool and quiet, even with the GPU power limit at 120% and the CPU drawing 115W with an OC. I used an Assassin 120 X SE R cooler and was blown away when it kept the CPU at 52C during a burn test. It is the thinnest 120mm cooler I've ever seen but I'm planning to get one for my Ryzen 5600X. A recent GPU upgrade left me with more room and the 92mm cooler is looking awfully small. Been running an undervolt/underclock to keep temps reasonable and for $20, I can overclock the piss out of it and still drop temps by 10-15C.

Great review

you deserve more subs. edited like a 100k subs channel yet you only have 16 (17 now, you earned one)

@_At0mz

8 ай бұрын

It’s his second channel lmfaoooo

@ryozaki96

4 ай бұрын

He will would get more subs if he didn't have like 10 KZread channel. The company behind this channel is weird.

@zGoalOfficial

4 ай бұрын

​@@ryozaki96read the name

@ryozaki96

4 ай бұрын

@@zGoalOfficial yup it's a secondary channel, the original channel has 193k subscribers. Still he has at least 3 secondary channels with different names

Tysm! 😊

great video just got these

Thank you

Do you have a video on how to daisy chain the fans together , not too many helpful videos on how to connect the wires properly when connecting multiple fans especially for first time pc builders it would be much appreciated if you made content on where it connects to and how it works in death thank you👍

i’m thinking about getting these but just wondering, how do you change the rgb do they have a software?

i'm definitly taking theses, in france we have a legal warrenty of 2 years so if something breaks we get a refund or a replacement

My mobo doesn’t have an rgb header I do have a commander core from Corsair that I have two a120s connected to. I’m thinking about getting the 90mm fan for the low profile cooler but not sure if I’ll be able to hook it to the command core and the cpu fan controller pins. I’m wanting to add one more tiny rgb fan to the cpu basically but don’t have the rgb header.

as for regular or reverse flow would u just flip the fan? are the fans still working well for you

@JustWolt

3 ай бұрын

you can flip the fan but then you have the back part of the casing spindles blocking some of the fan rgb. Reverse fans allow you to have the airflow direction you desire while still having the fan case spindles on the opposite viewing side.

Can the daisy chain to hooked to ARGB fan controller hub or has to be plugged to the motherboard?

How many LEDs does this fan have in the argb?

hi, nice video, can you please tell me how to set up the rgb and how to change it please? Is there some sort of software for it? i have a corsair rgb fan hub and downloaded icue, but it didnt detect it.

@krishnaanand3413

5 ай бұрын

Hi this is argb which connects to your motherboard rather than the proprietary connection that corsair uses. You can buy an argb to corsair converter but the use is variable

How do you put the colors you want cuz I can’t

What IS the name of his case ?

How do I change rgb colour on the fan?

Hi, how is the noise? I have the cougar mx330-g air case, the stock fans at 1300 rpm hit 41 Db. Are these thermalright fans louder or not?

@duyanhtran4009

8 ай бұрын

Thermalright is well known for their quiet fan. That's it for you

@peterperez3894

2 ай бұрын

Kinda late but i just got 6 for my corsair carbide spec 05 and even at max speed they are really quiet

Hi, do you know what the difference is between to C-S and W-S - thanks

What if you don’t have argb header? I did buy the thermalright argb hub. How do I install it?

@Lurch-Bot

5 ай бұрын

You get one of those $20 cheap AF hubs that comes with a remote that lets you change the color and pattern. Some hubs are just hubs, while others are controllers. From what I can discern from a quick search, it looks like what you bought is just a hub and will not work without a control signal from a MB ARGB header. It is just a holdover from before they started doing the daisy chain thing and you would have to have a header for each fan. Thermalright also makes a very basic controller for around $8 you could get to make it work but it will have limited functionality. It looks like a little inline dongle with 3 buttons on it and you'd have to open the case whenever you want to change the color and/or pattern. Also, the only thing I am seeing for hubs with a Thermalright brand is actually a PWM hub, not ARGB. AFAIK nobody makes one to plug into an internal USB header for control with software, which seems so obvious but now it is actually cheap enough to produce that, it is an edge case anyway because even the 5 year old ASUS Prime B450 I have has both 12v and 5v headers. How many people want to spend $50 to have software controlled RGB on a 10 year old platform? The USB linked hub would cost at least that much. Nevertheless, I'm going to get to do it at least once because I am building a PC to sell with a 4th gen i7 and a 1080. The 1080 has RGB which will have to be controlled with software and then the case fans will have to be set manually with the remote. Will be a PITA for whoever buys it but on a $500 PC that performs as well as it does, these are the kind of things most people will just cope with. And it will have functional RGB. TL;DR, here's a link to a YT vid that will say basically what I said using a lot more words and taking up a lot more time than just reading this comment: kzread.info/dash/bejne/iZ6ckq2upqTPoMY.html

is there a software to control the fans?

@OnlineProfitsTips

8 ай бұрын

FanControl does good job

@Poeticzx

4 ай бұрын

@@OnlineProfitsTipsdoes it also control the liquidcooler fan for the cpu

Can I just connect it with the 4pin into the motherboard?

@Lurch-Bot

5 ай бұрын

How long is a piece of string? This question is more suitable for Reddit, with photos and other info provided so someone can actually give you a real answer. The answer is conditional on numerous factors you have not elucidated.

Which software did you use to control the color of the RGB?

@Kryoth

Жыл бұрын

Aura sync as you can see he has an asus rog mobo

@zelppaniP

Жыл бұрын

@@Kryothdo you use softwares based off the motherboard?

@isaiah9160

10 ай бұрын

@@zelppaniPyes

@Lurch-Bot

5 ай бұрын

I recently discovered that you can control RGB through BIOS on a Gigabyte B450 Aorus Elite V2. Not sure about the Asus Tuf board I have in my gaming PC but everything else on it is better speced than the Anus board. But since I was putting the Anus board in a PC I'm going to sell, I found it a very useful feature for staging my product photos without having to use an app (in my experience, they all suck). Another point worth mentioning is that there is some spotty cross-compatibility between manufacturers. I have used an EVGA app to control lighting on a Asus board before. The card was EVGA and using the Asus app to control the lights on the EVGA card didn't really work properly. I also had a Wraith Prism in the mix which is 12V RGB. The Asus app also didn't seem to like doing both 12V and 5V lighting, which was probably the issue with the GPU also. I don't really do RGB, I just tried it once so I knew how to do it as a builder. I hated it and will never RGB a PC for my own personal use. It used to be a huge waste of money but these Thermalright fans are way cheaper than the Noctua fans I typically use. It really doesn't cost extra to have basic RGB these days but I still won't do it. I might buy these fans for one of my own machines but it will be the non-RGB variant.

@rabiulislam92

8 күн бұрын

@@Lurch-BotAnus board! Nice 😂

That sticker can be removed super easily. I actually remove mine and place white vinyl over them. It looks so good in the end.

@AmorFatiistaken

4 ай бұрын

like a white vinyl sticker? Where did you get them?

@4x4forlyfe

4 ай бұрын

@@AmorFatiistaken yep, I ordered a vinyl sheet from Amazon and some circular craft punches. Ordered two sizes of the punch: 1.25" and 1.50"

how do i daisy chain these please

Are these THERMALRIGHT TL-C12C-S compatible with a Gigabyte H610M S2H DDR4?

@wockreaper

6 ай бұрын

Motherboards don’t need specific fans to work, but yes, these will work with any case. If you want a radiator for your cpu, this is the wrong type of product and I would look into heat sinks or aios

the review is really good thx for that! but one quatsion i saw on other vids that one fan can connect another one to him but not 3 if i have one 5v argb vdg connecion and one pwm 4 pin connector on my mother board how much fans can i connect to it 2? 3? or maybe 4 idk

@ruimelo9469

10 ай бұрын

Did you got the asnwer?

I'm planning to put 23 of these into a Thermaltake Core P8 TG. So, the cheaper the Fan, the better! 😂

@SlaveryEnforcer

5 ай бұрын

Do it and post the results lol

What app did u use to change the color ?

@Ravie.

4 ай бұрын

Yo did you find what app is used to change colors

@adamhall7077

Ай бұрын

OpenRGB

where do you get the rgb software download for these fans as the only have the aio cooler software on their website

@switchblad333

2 ай бұрын

Your motherboard should be able to control these, mine is an MSI motherboard so it's called Mystic light

@antosotvik3465

Ай бұрын

If you download a software called signal rgb, it is actually good.

is the white light the whitest white the RGB can do?

@degoamaya1135

6 ай бұрын

i believe so

You can remove the sticker to make it look better

like, subbed and commented :D will do so on the mainchannel, keep up the great work ^^

Is there a softest you can use to change rgb

@dreyj0204

2 ай бұрын

openrgb or the mobo software

how can u program the lights to be different colors?

@phillysupra

3 ай бұрын

Rgb header. Motherboard rgb in uefi as most mobo can do this nowadays

I used to get pc fans for 2 bucks a pop in 2007

One question. If you buy a one pack does it also come with daisy chainable capabilities?

@izTruong

11 ай бұрын

Yes it does. I have 7 of them (actually 8 with the se-214-xt), sync perfectly, no hub needed

@ruimelo9469

10 ай бұрын

You got 8 connected together?

@pulsivs7902

5 ай бұрын

@@izTruongso then how do you change the rgb colors?

@Angel-em6od

Ай бұрын

​@@izTruonghow many fans did you daisy chained to an ARGB port?

My mobo RGB connector has 4 pins, the fan rgb connector is 3, should I bend the pin at the mobo?

@ciexll

3 ай бұрын

you have no 3 pins?

@SaifAli-oe3ph

3 ай бұрын

No no no please don’t the 3pm is rated a 5v whilst the 4 pin is 12v it could cause a short or even a fire you could buy a rgb converter though deep cool does a good one for £12

How do I control colors with what software

@iconfuez6538

3 ай бұрын

motherboard argb software

hello, how is in radiator?

hello how to control the rgb of the fan pls

@Ravie.

4 ай бұрын

Did you find how to change rgb

Can i connect 6 of them togheter?

@rohinvfx

11 ай бұрын

yes

@ruimelo9469

10 ай бұрын

Do you feel less power?

@garavonhoiwkenzoiber

8 ай бұрын

at 0.20A each you can do 5 on a 1 amp fan header, and 10 on a 2 amp fan header. You also need to pay attention to drgb power draw.

1:33 I want to figure out how do you put that fan on top of the PSU in the case. Explains

@Jc88500

10 ай бұрын

It’s a feature of the case. Lian Li Lancool 2 Mesh.

What Rgb software do i use for these fans

@Ravie.

4 ай бұрын

You found what the software is

@zacbao-dai3045

4 ай бұрын

@@Ravie. I used the rgb software for the mother board that I had

What if I have a 4 pin rgb header on my motherboard ?

@garavonhoiwkenzoiber

8 ай бұрын

that'll be a no. A 4 pin rgb header uses 12 volts, drgb/argb uses 5 volts.

@mrsupertash

6 ай бұрын

Having the same issue right now on my B450 Tomahawk Max. I'm looking for a separate ARGB controller to completely bypass the motherboard headers which are 4-pin 12V and thus not addressable. These Thermalright's 3-pin 5V A-RGB can light up each LED individually, while with 4-pin 12V ALL LEDs show the same color and brightness at the same time. There are some 12V to 5V converters but they only let you connect the 5V ARGB to your 12V RGB motherboard header but you will lose the functionality to individually address the LEDs and thus what ARGB really is about. So with these converters the ARGB fans will behave as if they were 12V RGB fans and only show a single color at a time for all LEDs. The only gain would be you could control them with the software that the motherboard comes with, but most of them are horrible anyway, it seems. So, a separate ARGB controller bypassing the mobo headers is the way to go for me. Just need to figure out which one is actually good.

And then I noticed he have only 5k subs

What software do you use to control the RGB on these?

@neev4367

6 ай бұрын

Just use your motherboard RGB software?

@theofficialbeak

6 ай бұрын

@@neev4367 the ASRock software is bad and has nowhere near this much control

@neev4367

6 ай бұрын

@@theofficialbeak Agreed. My old board was AsRock and it was a pain in the ass to download the PolyChrome RGB Software and the software looked like it was built by a 6 year old

@Outware0

6 ай бұрын

@@theofficialbeaktry openrgb

So the W is reversed?

@scottsenior5319

3 ай бұрын

The r

Bro I bought these but i have no idea how to hook the the rgb

@Mullotov

Ай бұрын

Just a quick question I’m about to buy these I don’t have an argb 3 pin v5 can I use them simply without argb until I get a new motherboard

@Mullotov

Ай бұрын

Just a quick question I’m about to buy these I don’t have an argb 3 pin v5 can I use them simply without argb until I get a new motherboard

Hi may I know how to control the Rgb lighting ?

How do i change the collor of the fans

@josh8oh8

5 ай бұрын

Use motherboard software or use an argb hub

Yea but how tf you change the rgb

@dxmii.h

3 ай бұрын

motherboard software

Bro how tf did you install that shit has no threading on it

can i daisy chain 5 of this

lets be real. the Artic P12 is just as cheap or cheaper and some of the best performing fans you can buy. they are under $5 but they have 0 RGB another plus in my book.

Bad review, no mention of sound at all, which is a very key aspect of fan specs.