Thermal Load Problems in Finite Element Analysis| Heat transfer Problem in FEA

A composite bar made of three sections section 1, Section 2 and Section 3.
All the videos notes in one pdf file:
Download now 👇
All the videos notes in one pdf file:
Download now 👇imojo.in/femvideonotes
One Dimensional Bar Elements:
1. • Thermal Load Problems ... ( Forces are applied towards left i.e opposite )
2. • Basic Steps in the Fin... ( Basic Steps in FEA)
3. • Composite bar formulat... ( Two bars parallel with spring attachment)
4. • 1D Finite Element Anal... ( Two bars parallel with spring attachment)
5. • Structural Analysis of... ( Gap between the bar and wall problem)
6. • Structural Analysis of... ( Gap between the bar and wall problem)
7. • FEM Thermal Analysis |... ( Step bar both ends fixed )
8. • FEM Bar Elements Probl... ( Tapered bar)
9. • Finite Element Analysi... ( Uniform bar with gap between bar and wall)
10. • Finite Element Methods... ( Very Important problem on bar)
11. • FEM Bar Problems |Fini... ( One End is fixed )
12. • FEM bar problem | FEA ... ( One end is fixed load applied at the another end)
Truss Elements Problems
1. • Connectivity table for... ( Three elements, connectivity table)
2. • Boundary conditions in... ( Boundary conditions )
3. • Trusses Method for Beg... ( two elements, one roller support & one hinged support )
4. • Analysis of Trusses Us... ( Two elements both end are fixed )
5. • Analysis of TRUSSES Wi... ( Three elements)
6. • Finite Element Analysi... ( Three elements, two hinged and one roller support)
7. • FEM truss problems | F... ( Two elements, One roller support )
8. • FEM Truss Problems| Fi... ( one hinged support and one roller support)
9. • FEM TRUSS PROBLEM | Ca... ( Four elements , two loads at different nodes)
Constant Strain Triangle ( CST Elements )
1. • Isoparametric triangul...
2. • Problem 3_CST problem ...
3. • Problem 2 _ CST Elemen...
4. • Stiffness matrix for t... ( Stiffness matrix calculation )
5. • Problem 1_ CST Element...
6. • Constant Strain Triang...
7. • Two Dimensional CST El...
8. • Strain Displacement Re... ( Strain- displacement derivation )
9. • Constant Strain Triang...
Beam Element Problems
1. • Reaction forces on a b... ( More details about Reaction forces calculation)
2. • Nodal forces and Bendi... ( SF and BM formula for different loading conditions)
3. • Find the Deflection an... ( Beam with Spring support)
4. • Analysis of Beams in F... ( UDL load entire the span of beam)
5. • Beam Problem in Finite... ( Concentrated loads )
6. • Structural Analysis fo... ( Cantilever beam )
7. • FEM beam problems | Fi... ( Cantilever beam with roller support at end, point load)
8. • Beam problem in Finite... ( Continuous cantilever beam with two supporters)
#thermalloadinfem

Пікірлер: 8

  • @zackvizeman5329
    @zackvizeman53292 жыл бұрын

    Hello! Have you seen te video you have posted? One cannot see the entire page!

  • @manashjyotideka8682
    @manashjyotideka86823 жыл бұрын

    sir first of all thank you for making these videos... but at 17:28 the value of F3 should have been -32.7 and F1 = -301.2 + R1 F4 = 112.3 - R2 u2=.222 and u3 = -0.0039

  • @vinaykumargupta3594
    @vinaykumargupta35944 жыл бұрын

    And sir how you got R1=245 If 249-249+0+0= -301.2+R1

  • @vinaykumargupta3594
    @vinaykumargupta35944 жыл бұрын

    Sir can you show direct calculation part after boundary condition. How you got U2 and U3 directly in calculator

  • @MaheshGadwantikar

    @MaheshGadwantikar

    4 жыл бұрын

    Yes. I will show you in my next video.

  • @MaheshGadwantikar

    @MaheshGadwantikar

    4 жыл бұрын

    Shift+mode , you will get EQN then enter 3, later enter A1,:b1 etc values, final value will be your results. Try once

  • @vinaykumargupta3594

    @vinaykumargupta3594

    4 жыл бұрын

    @@MaheshGadwantikar ok sir tnx

  • @vinaykumargupta3594

    @vinaykumargupta3594

    4 жыл бұрын

    @@MaheshGadwantikar sir done this part but getting different value U2=0.285 & U3=0.1652😥