My s14 had the same issue with cluster and lights and such. New fuses would be burned as soon as i put them in. The wire harness had multiple bald spots and around 10-12 wires where down to bare copper. I stripped the harness to expose any bald wiring. I then had to pull each cable 1 by 1 and tape it up individually. After doing all that my car was all good

Try relocating your harness to the side of the wheel barrel instead of under. mines on the side so im not worried about messing with it & easier access

@JtRidin

2 жыл бұрын

👍

@mostclapped_3311

2 жыл бұрын

Wheel well*

The harness has wires that are exposed and touching each other each wire that is exposed needs to be covered Individually, the wires keep touching each other they gonna keep shorting

Love the motivational words at the end of the video! Keep up the grind Sonny, proud of you :)

I respect the honesty and the hustle. Continue being a role model.

The end was very motivational, thank u for sharing!

@Nismo-pu8sg

2 жыл бұрын

bot

My man son always doing his best with what he’s got !!! Good luck with the car bro hope to see more content bro, big aloha from Hawaii 🤙🏾🤙🏾🤙🏾 sheeeeesh🤟🏾

YESSSIRRR always excited for the new vlogs Sonny 🙏🙏🔥

feel ya. I have a short in my S13 that keeps it from running. blew my ECU, a bunch of other stuff. on the DMM/tester, you want to use DC Voltage. should have around 12-14 volts. I've seen buddies have jackstands go through the floor where you are putting them. Try and put them on the frame rails, or at least use some type of plywood between the jack stand and the floor to spread out the weight.

Broooo u r dope af I love your energy keep doing what you doin man!! May god bless u

I love the content sonny!!!💯💯I hope you reach your dreams and get the car lights started!!💯

keep grinding brodie! respect the hustle and much love

Don’t ever put a bigger fuse in there! You could cause the wire that’s causing the smaller fuse to pop, to catch fire since it’s not popping the fuse. Trust me I did it once and the wire fried big time and I had no clue about wiring all like that at the time. Just be careful man

At 6:37 grab a old license plate and use some self tapers to cover the harness. It’s flexible enough to bend but thick enough to shield the wires from the tire. It’s been protecting my harness on my kouki for years now

Love your vids

Love the vlogss man all the way from the Nederlands 🇳🇱

Yo the second you said your headlights werent working i knew exactly where you were goin with this XD

From the other video where you taped up the harness I noticed you didn't cover the wires properly... Any section that has the copper visible needs to be taped up separately so that it has no contact with other wires

Feels good seeing some vids

I just learned about electrical in school, when your fuse keeps on popping it’s probably short to ground. So I would recommend checking your ground before testing anything else

Green wire looks kinda fooked. You dont want those wires touching homie. Gently separate them and test the continuity one by one. When you're done make sure you heat shrink them individually

The multimeter has to be calibrated you pit the red and black lead together until it hits zero then you can test the circuit

Going thru this same exact problem thats crazyy

that's why you take off the bumper to fit a jack under your whip. I have to do it to mine every time I work on my car

Love the vlog bro but I saw the blog where you kinda black tapped it . Should have fixed that harness a little bit more tighter and away cuhz .

I'd definitely recommend getting wheel chucks. That think piece of wood and also with your car being on an incline is just asking for trouble.

“The worst problem for all 240sx” i thought the worst problem is owning a 240sx lol

im here since the illiminate got 100k subs! so proud of u guys

Its been a while miss you bro ❤💯

Been missing your vlogs

FINALLY I missed you SONNY!!!!

Hey Sonny, where is the s15 ? Randy already got his r34 ...

Its great to see you bro. Missed ur videos. Keep up with research with stocks u can do it. 🙏🙏🙏

definitely not a jacking point on the s13, would recommend jacking from side or at the tow hook end from the front so you dont bend your frame

Sunny, stop cutting corners, you need to open the wiring harness and check each wire and redo everything, my guess is open wires are touching each other and causing shorts.

check you front and rear side marker bulbs/sockets. Had the same issue on my 240 one of my side markers had hella water.

Hey bro can you give us an update on the s15

Dang man you put the jack stand in the floor of the car instead of the body's frame

Had the same issue with my s13, was going crazy looking for the issue I did the harness tuck checked everything and it still kept popping the fuse. Turns out it ended up being a bad ground wire behind the radio the previous owner installed. It would show up as a ground but when the ignition was forwarded it would throw 12volts I say try it man it might be that

Still contact under Tape check it out try to Tape each wire up.

Sonny the 240 is looking so 🔥 tight and clean try approaching the drive at a 45 degree angle

Keep Grinding 💯💲💸

Check the ground wire,check the harness to the fuse box ,main fuse to the engine bay, the trace back to headlights

There might be 2 wires tuccin together that causes the short

Broly get one of those cheap light power tester that light up when you have power to see if the lights are getting power in the back once you do that you will know if its a power issue but right now sounds like a short

Check your relays bro. You also should check the grounds cause you have a short some where or your relay is stuck open and getting hot wired straight from the battery

Hey Sonny where did you get your 240 from

You have a grounded wire check any bulbs if its wet or not have a nice day❤️

get the autostorm collect harness proctector for the firewall

Any tire shop recommendations in the SJ area

fix wiring 1 by 1 once done replace all fuses

Take the led headlight bulbs out and put the stock bulbs back in. Maybe you a polarity reversed and it can pop a fuse. Take the whole wire harness and run it in the engine bay.

What camera you use sonny??

I feel frustrated for you Sonny!! Thanks for the video

Fuse pop means a wire is touching ground or another wire

When u gonna put the kit for the 240 that randy gave u

He’s using the ohms meter wrong setting lol 😂

Rear cant "slip" on driveway if the hand brake is up. Or in gear.

I thought you bought a s 15 in japan? What happened with that

Hope you get it fixed man she the baby

You need to pull and fix all wires Spratt all of them and tape one by one or extend them tuck them away only way to fix I had those problems

Hey Sonny I really like the lifestyle hoodie can I get a discount on it?

please take apart the wire loom and fix all the fuxked shorted wires

that must be a pretty safe suburb for you to just park your toys outside comfortably

It could be a background

We need more drifting lil homie

Share a video on what you're investing in.

Its the same with skylines if anyone wanted to know

All the wires are exposed. You need to check for any breaks in wires. The wrap each wire separately so they aren't touching and shorting out.

Yeah dawg your harness is exposed and touching another wire even with that electrical tape and that’s why your fuses keep popping fix that harness before the 240 catches on fire mang 😩

@blitzeazy

2 жыл бұрын

Yuuuupppp can't believe problem not solved yet... maybe like he said... he busy

@ap2s2000

2 жыл бұрын

@@blitzeazy naw he just an eediot lol

why you don't bag it and raise it up ?

watching sonny work on a car is funny as hell i dont know if hes purposely trying to be funny or if hes for real but either way the boy is a genius lol

Sonny! You need to patch up the wires and fix the short first, no amount of tucking will help with damaged wires. Isolate the individual wires and either replace the exposed wires one by one or if they are still intact; wrap with electrical tape or just get a new harness lol

Are you sure about that? Mine is still on jackstands for some years now lol

@ItsSonny

2 жыл бұрын

hahah I feel it

When a person gets coilovers, don't get a front lip. Get an air suspension or coilovers that have cups that work with air to raise the vehicle.

what body kit is this 😮‍💨

Replace wire that are cut and smear bare metal touch together blown fuse replaced new wire

You really need to unwrap that harness and tape/heatshrink every wire separatly.

Despite all this issues. This car is a work of art and has a beautiful reputation in the jdm community. Those whole can't handle it's little ticks & tear shouldn't be owning one

Hey Sonny, take the electrical tape off and wrap the wires individually! They're exposed and touching each other. And never up the fuse! If the fuse didn't pop, the wire would catch on fire and probably the car too. Stay safe, love the video and motivational words! ❤

Nice one shawty!

You put tape in the wiring harness. Doesnt mean its fixed. Abviously you have a lot of stripped wires that needs replacing or tape them individually at least

Maybe wire touching metal causing to pop that fuse

Am I tripping or did I see you not use the car jacking points when you used the jack stands....that's damage to the floor

Where’s the s15 man

I'm not sure if you just shortened your 'fix' explanation for the video, but you can NOT just tape around exposed wires to fix the issue. The wires rubbing against the tires is the initial cause, but most certainly you have some shorting in the sections you taped up. You have to make sure any raw wires (showing copper/missing insulation) are not touching each other inside the harness sections that you taped up. Make sure you unwrap that and verify that none of the raw wires are touching each other. Something tells me that's where your short is.

what color code is that?

Fuse ??

Bruh everyone told u in the comments fr the last time u were messing with the harnesses that u gotta go threw all the wires that are exposed!! Lmao anyways when u slapping that body kit randy got u?? 👀

take off all the tape you put and check the wires , have to be some exposed and touching , putting a higher # fuse is just going to make it worse.

Sonny noooo! the pinchwelds

S15????

🔥🔥

Yo sileighty conversion??????

i mean my car is a monster truck. just pull the harness throught the firewall. there is plenty of room to stuff the harness back there all lazy. just extend wires for lights, use decent wire.

Time to get a new wire harness

Jack stands go on the frame rails not the pinch welds😂

@Nismo-pu8sg

2 жыл бұрын

Wrong. Do you have a 240? The frame rails will collapse many people have had that happen

I knew he was gonna have this issue from the last video he posted trying to "fix" it. just putting tape over exposed wires isnt going to fix it. all the bare wires are still making contact with one another, if anything taping them together like that made it worse since now youre holding all the wires together. you need to go through every single stripped wire in that loom and tape it individually and then when each wire is seperated from the next is when u tape them all together to close the loom. that is a fire waiting to happen hes fortunate that fuse box is still doing its job

sonnyyyyyy!!!!!!!!!!! love ya!❤️

You should swap that Sr into the rsx and get rid of the 240, nothing but problems for the last year with it.