I am a 72 years old Chinese from Malaysia. I just start to pickup this hobby seriously. I have watched your video very good. That is exact the storch l will like to build. Tq

@Declan-pg8cg

3 жыл бұрын

@Lance Harlem I've seen you put this irrelevant copy+paste comment in numerous video threads on KZread. No one cares for your spam.

@moonscrafts8987

2 жыл бұрын

Mr chin we are with you 🙂

@usamashehzad5655

2 ай бұрын

bro you alive? just checking.

Thanks Man! You are very organized and very good at explaining the details. It is very professional. Keep going!

I built one and finally flew it this morning. It was awesome! It’s the first 4 channel airplane I’ve ever flown and it was a blast 👍

@khanghoang4848

Жыл бұрын

7*. 3:42

Great video! Neat project! I've never built or flown a RC plane, but now I want to do both!

Thank's you a lot for this very complete tutorial :)

Really nice build video !! Thanks for sharing. Appreciate it 👍

The way it takes off so easyly is awesome!! Congratulations! Definitely it must be built with flaps.

Perfect for beginners to start with. Thankyou♥️

Emazing take off and perfect landing

Just finished building it myself. Looks great and generally easy to build. Good job!

@usmanashfaq7497

4 жыл бұрын

how much time it takes to build it?

@rahultej2248

3 жыл бұрын

4 hrs

@rahultej2248

3 жыл бұрын

Shivendra Yadav no, I estimated that. And iam definitely gonna make one. In the cost of 4000 inr This is gonna be my second project. If you wanna see the tutorial of my version, I’ll link my channel. Even though 32$ is ridiculously less, My version is an upgrade. And the weight is less than half.(350gr w/o battery) And with a long range simple diy transmitter and receiver Which costs just 1200₹. Ps: my first project is a flying wing.

@rahultej2248

3 жыл бұрын

Shivendra Yadav I haven’t made a video yet. I will share the link as soon as I upload the video. And the channel link: kzread.info/dron/J3Gmtzeza3_W3Z6ViyPyfg.html

@dramaticdrawings8286

Жыл бұрын

@@rahultej2248 can u send the link

I hope you enjoy this video and take your free time during this pandemic to build it, take care and fly on open spaces without having contact with others, that help save lives, at the same time there's no need to fear, just be aware and take care.

@Joyplanes

4 жыл бұрын

@@MohamedAhmed-iq8dc Hey man, this is a modified version of the FT Simple Storch, really slightly modified so is basically the same, I stated that on the web post, and I'll keep modifying it to the point it is a bit more different from the FT version, but it is a wonderful base point for a trainer airplane but I found some things I'd like to modify already.

@dsnyder05

4 жыл бұрын

@Joyplanes RC It looks like the new website is down. I can't get to the extended video and other information. Hopefully you can get this taken care of. I really like the lines of the plane. I like the Storch, but your redesign looks so much nicer! Excited to try it out!

@Joyplanes

4 жыл бұрын

@@dsnyder05 Some times there's some maintenance, have you logged in yet?

@eggbaconvr6023

Жыл бұрын

What size wheels did you use because the ones in the parts list were discontinued?

@amandapacheco9398

7 ай бұрын

@@Joyplaneswill ela foam work

Great job, well done.

Saw this and subscribed before the end of the video! Thanks

Shrink wrap around the push rod to make a quick disconnect, you are a genius !!!!

i done my third flight with this plane yesterday, tnx a lot!build something and bring it in flith is a beautiful feel.... greeetings from italy

This plane reminds me I play the Real RC Flight Sim 2016! Excellent video, bro! Thanks.

Really like that control rod connection method with the heat shrink, I’ll be trying that!

@soufianesoufian9552

4 жыл бұрын

مهو نوع هدا الكغتون

@unity3d706

3 жыл бұрын

Nice

Hi bro you are excellent wow everything from your videos makes me inspire to do as well thanks you are working hard for better videos and better knowledge thanks you helped me in understanding many topics and thing thanks bro

Awesome how to video really enjoyed it. Il be saving this video to Watch again when I build one myself . Thanks dude awesome channel just subbed 😎👊

Well done Support from Bangladesh

Wow! you make all of it look so easy. I'm researching beginner RC planes for my son and I to learn together (he's 11). Your build seems a little challenging but looks fun. Thanks.

@daviddavids2884

4 жыл бұрын

some info. 1) paperclad foamboard is HEAVY. in Most cases, its use results in tail-heaviness in the dom. distribution of mass. 2) overall heaviness/auw leads to a need for 'more' wing area/lift. minimum wingspan should be, say, one yard/meter. (mitigation of both is possible; via the use of panel cutouts. but No one ever does it.) 3) consider whether the price of a simulator would be 'worth it'. especially, if you live where the weather is frequently not great for flying. 4) a novice pilot can spend a Lot more time flying/smiling, if he chooses the right type of model (to learn on). that being, a light-weight, three-channel slow-flyer. such a model must have a dihedral main wing, in order to avoid the need for ailerons. while there are some manufactured models that will fly slowly, the main wing may not have enough dihedral, to allow the use of rudder-initiated turns. two examples of a slow-flyer. cheers googletranslate kzread.info/dash/bejne/no5l2LeEk87ahs4.html kzread.info/dash/bejne/ZKyEwdl9lZe7gNI.html

Great build. I'm going to download the plan and build one for myself.

@ufo1019

4 жыл бұрын

Mee to

Well done good sir. Great channel!

Good job I all ways like your videos I have built a lot of the planes from flight test my self keep up the good work I will be watching

@usmanashfaq7497

4 жыл бұрын

in how much time did u build rc plane?

Nicely done!

You are the best rc hobbyst 🙂🙂🙂

Yes need all the details no other youtube video is like this their all about learning why servos do etc, I want to learn everything!!!!

Nice build ..think I will build it soon....thanks

Flies real good, really gentle, I think I will give it a try. Only downside is, when you lawndart your plane, and chances are you will as a beginner, I have for sure :), motor will never be as good. Pusherplanes have that advantage.

Perfect work

Thanks for the video.

I was flying my planes in those fields right beside the Papal cross in the Phoenix park just the other day. It's right beside where I live and very handy.

Awesome man your video will coming in Million views

Perfect DIY rc plane.

Your channel is so underrated eventually your channel will explode, seeing as your content is so good.

@unity3d706

3 жыл бұрын

Yes its amazing

@unity3d706

3 жыл бұрын

I am also trying to make my channel like this bro

You and your videos are really amazing

@Joyplanes

3 жыл бұрын

Thank you.

Great plane!

Awesome 🔥

Great. I like this plane.

Nice plane and flying be safe

Successful I completed this Plane now time to flying 😊 Thanks #joyplanes

Excellent. !

Stay safe bro by the way 100th comment. Also u make epic videos.

Great video

Great plane and I am going to build this one

When will the "improved version" that you mention at the end be available? What are you looking at changing?

omg, nice project

thank you this taught me so much!

@Joyplanes

2 жыл бұрын

You're so welcome!

Amazing 👍👍👍👍👍

Wow Amazing dear bro.. Great

Nice work

Great video translated into all languages

amazing was that wow like subscribed :)

I want to make planes like you, I want to speak English like you jejeje, good job.

This plane is very good for beginners, very is to build, easy to fly. Well I'm searching for some DIY long range fpv planes like GT rebel!

Nice build

@Joyplanes

2 жыл бұрын

I'm glad you like it

that is very nice plane model sir ji👌👌

Thanks a LOT. After losing my rc first airplane on my third flight (due to wind, misaligment of the controls due to previous similator practice and many human ME errors as always), I am ready to fly again and this looks like a great option to be passionate about what you are creating and the care on it. I will do it, thank you!

Yes I build it, my dad helped me with some. But there is no fields to fly the plane sadly, we tested in our backyard , pretty good :). Great job

You are the best

Cool bro its very interesting I will try Its amazing

@Joyplanes

3 жыл бұрын

All the best

@unity3d706

3 жыл бұрын

@@Joyplanes Thank you so much

really thank you I love your videos ... Can you explain more about plans and the essential conditions to have a good plan .. I love aiplanes and I like your way to introduce informations and your creation

@scottfirman

4 жыл бұрын

You need a printer. You also need to make sure your computer or whatever is set up to print tiled. Flite test offers full plans so you can go to a print shop and have them print off full sized plans. Next. Lay out the plans and tape them together. I use 3M 77 Spray adhesive to directly glue my plans to the Owens Foam board. After you cut it out, you can peel the plans off the foam board after building. He did a great job. You can watch Flite Test video 's for more on how to set up and fly RC planes.

@adnanetube9588

4 жыл бұрын

@@scottfirman Thank you a lot for your help . And I have seen your channel It very nice , I love it .

Great!

I built mine and it works great

@rubenloredo6721

3 жыл бұрын

wow, congratulations, can you give me the weight with and without battery please?

Excelente avión

Awsome tutorial mate.. Im going to try that. Pardon my ignorance but why we don't need flight controller in these planes? Also if i need to increase wingspan then apart from dimensions, what else needs to be modified?what range uve reached so far vid this its remote?

It's really a very good detailed video thanks to you.. But it's ok to use 2400kv motor with 4s lipo batt with extra weight to the fuselage.. or it will be to fast and hard to control.?

Wish you could show how you setup the radio and how to know what range you might get with different configurastions

I support you from Bangladesh. I have a question? Are you using motor and prop use?

just made this. really fly well. only problem i faced is given smooth curve to front end of wings.

Lovely

its so lite, takes off as feather does! Video is filmed awesome, like the music at the end (could you please write the name?)

@tnmade7264

2 жыл бұрын

Great job

There is a foam angle cutter you can buy to cut foam in 90 and 45 deg, the 45 deg hinge cuts and 90 deg bends will be extremely accurate and aesthetically the plane will look much better

@CaptainFishbones

Жыл бұрын

Can you throw up a link?

Great explaining and details. Thanks. I made the fuselage, but as I glued the two pieces, they are not perfect 90 degrees. I was wondering if this makes a big difference in flying the aeroplane? The longitudinal axis is perfect, just the side angles are a bit out. The wings, elevator and the rudder also aligned perfectly. I appreciate if you can advise on this 🙂🙏

@Joyplanes

3 жыл бұрын

Fuselage it's ok, the critical parts are the alignment of stabilizers and wing

@AliAbiri1

3 жыл бұрын

@@Joyplanes thanks for the quick reply. Much appreciated. I'll make sure that rudder and elevator align perfectly with the wings. What is the best spot in terms of stability to mount an action camera on the plane and what is the range of the radio? Thanks 🙂🙏

@Joyplanes

3 жыл бұрын

@@AliAbiri1 you can put the camera in the wings or in the fuselage as long as the CG is not affected.

great!!!

Quick question: how many flight minutes can the battery from the component list last assuming an average flight?

I watched your video and to the challenge to build the Storch according to the plans. The only thing I don’t have are plans for the landing gear. I realize that they are handmade but some lengths and approximate angles would be helpful.

@daviddavids2884

3 жыл бұрын

?????? main lg PARAMETERS. the main lg struts, of a taildragger, should be tall enough that the Prop does not strike the ground, during ground maneuvering. strut height should maintain prop clearance (on the ground), if the attitude is very Slightly, nose-down, also. the use of taller struts will increase the sto traits, of the airframe. btw, the WINGTIPS Should Be Finished !!!! i suggest you ponder These questions. WHY do you boys Think it is a good idea to copy an ANCIENT Design??? WHY do think it is a good idea to have stol traits built into an airframe.!!! as to the second question, it should be understood that when stol traits are built-into an airframe, they CANNOT be 'turned off'. in other words, those traits are ALWAYS There, Always affecting flight behavior !!! you boys who make models of ANTIQUE stol designs, end up with a model that is Not versatile (in the air) !!! googletranslate

İt flew very well, thank you for sharing this project with us. I am planning to scale it a little bit bigger. THANKS A LOT

@logiknotlogic6586

3 жыл бұрын

it flew? Mine is not able to reach the speed it requires to take off as the plane turns to the right and out of the road. Also I used a 3000mah battery which is heavier which may be why it hasnt lifted yet. And the wheels are a huge pain. Does the motor start to vibrate a lot when the plane is on the ground with the throttle a little less than half? What is the distance your plane requires to take off? What motor and prop did you use? Pls reply i need some help for my build

@_QWERTY2254

3 жыл бұрын

@@logiknotlogic6586 Hi, I used 1000mah battery because I didnt have 2200mah. Then ı put some weight in front of it. If your center of gravity is okay ı think there wouldnt be any problem . if your prop is turning counter clock wise, when you look from frond of it, you should give 3 degrees angle to the right, otherwise to the left. and you should turn motor downwards 3 degrees. I couldnt fly it myself because I believe I am not good enough. Someone threw and an experienced person flew my plane. If you are new in this hobby like me, I wouldnt recommend you to fly yourself even your are good in simulator. I used 10" 10x4.5 propeller. My plane didnt vibrate but I have had that problem before. but ı dont know why. ı used 1000kv motor. I am sorry if I made any mistake. english isnt my native language. If you have another questions, you can ask

@logiknotlogic6586

3 жыл бұрын

@@_QWERTY2254 thanks a lot man! I made my own motor mount which was what was causing the vibrations. Iv ordered a proper one. How long does it take for the plane to take off and distance too? The main trouble Iv been having was with the wheels. I was only able to go somewhat fast on a proper road. In the video, the plane literally takes off in a few seconds with very less space on grass

@_QWERTY2254

3 жыл бұрын

​@@logiknotlogic6586 ı dont know the distance but mine landed in 2-3 seconds without landing gears. I took off the landing gears because they were turning plane to the right. if you want ı can share the video with you

@logiknotlogic6586

3 жыл бұрын

@@_QWERTY2254 Hey Can you share the video is possible please? Thanks a lot

Increíble!!!

Amazing video. Can you please give the detail of the foam board ?

Cool! I will make also one soon. But in my place there are not enough flat terrain, so I will try to reinforce tail for hook. Will it work?

i really loved your work. i also noticed that you used a flysky i6 transmitter . what range can you get from it sir ?

@jonhohensee3258

Жыл бұрын

Twenty feet... at least.

thank u sir

Nice video and the great sharing. GbU

@Joyplanes

3 жыл бұрын

Thanks for visiting

Is that a model that can be purchased or scratch built? Very nice plane. It would be fun to fly. Thanks!

As your fan, I have a request to build a classic aircraft 'Bleriot XI' withaileron, elevator , rudder & landing gears by using depron foam sheet. I think it will be found most popularity among the world. As this classic aircraft is not available in web world in depron foam format. Looking forward for your responding.

Awesome video. Neat work. Can you tell me Aileron, Elevator & Rudder moving percentage ?

Great Video. What is the overall flying weight

Hey there, Very nice build. I just have a quick question. I can't ship the battery from CN (dunno what that is) to my Location, Germany, do you have an idea where to get one? Otherwise you also can give me a secondary battery that would also work. Thanks a lot.

Can I use depron 5mm foam for this? I'm confused bw the different types of foam. And is the foam laminated?

I'm just thinking about getting into RC so I don't know much - are there tools that make it easier to do the half-thickness/V cuts? I don't think I could do it precisely cutting freehand with a scalpel!

Great video, how to connect the electronics, receiver, esc, motor, servo etc?

Awesome video!!! May I know how long did it take you to build this?

@Joyplanes

4 жыл бұрын

About 2 days or 5 to 6 hours

I'm new to the RC aspect of this hobby and i want to build this plane, but when i checked the item discription it said that you need a soldering iron to build the plane which i don't have. I did however notice that the only time you soldered anything was when you added the strobe lights. I'm not going to get the strobe lights so is the soldering iron still necessary?

thanks sir. sir i want to know why used 4 servo motor for wing..

the exact pronunciation!! You must be an excellent announcer!!

Where did you get your plans for your rc plane in this video . Many thanks Peter

Any way to do a sort of air drag on it? Maybe a flat spin or cobra? That would be coll

nice

@joyplanRc do we need any mathematical work to build a new aircarft design???