This is how I carry my tools: www.roiamoto.com/toolroll Thanks for checking it out! Would love to hear your feedback!

It looks like it would be quite easy to bolt that on to the inside of the luggage support, that would keep it in place properly and be significantly more secure.

@RoiaMoto

4 ай бұрын

Hi mate, Fully agree! It is possible to do it and a would recommend a a screw head that sits flat, or even flush, against the support. That’s just to make sure there is nothing sticking out once it is screwed in. Cheers

Hi guys! Hope you enjoyed the video! if you decide to buy via the link below I get a small kickback from Amazon. Thanks!! Rear Rack - roiamoto.com/CRF300LASRearRack Side Luggage Support - roiamoto.com/CRF300LASSideLuggageSupport Links for US: Tool Tube - roiamoto.com/UniversalToolTube-US Straps - roiamoto.com/VoileStraps-US Mouldable silicone - roiamoto.com/Sugru-US Links for Germany Tool Tube - amzn.to/3Utwm96 Straps - amzn.to/3Upl45Z Mouldable silicon - amzn.to/3w7A9iw Links for UK Tool Tube - amzn.to/3SLXIGd Straps - amzn.to/3w6WLjb Mouldable silicon - amzn.to/484NCoj

I agree the stock toolbox has to go but the answer is not the tractor owners manual holder... That's literally what it is. You can find them at Tractor stores for $2. Too easy to lose the contents while riding. Get the MoskoMoto R10. It holds 10L of content and tools close to the body of the bike. Works great.

Nice. I have a 250L and the same toolbox. I will experiment with the possibility of attaching it without the luggage support.

@RoiaMoto

4 ай бұрын

Glad to hear you’ve enjoyed the video! It should work the same on the 250. Cheers

I can't see it staying in one place just with the molle straps especially with hard off-road riding. Nice videos though and nice ideas. Keep em coming.

@RoiaMoto

5 ай бұрын

Thanks for the comment, Charlie! So far it has worked well but I'm limiting the weight to a spare tube or my rain coat. Totally agree with you, not possible to load heavy stuff in there. thanks again!

Great toolbox, btw there are no phillips screws on Honda's It's JIS.

@RoiaMoto

5 ай бұрын

You're right. Officially these a JIS screws. Thanks!

As always, a great video that is very informative! 2 questions... 1. Are you still able to strap your Aux Pox on there with the strapped on toolbox? 2. Do you have the link for the toolbox? Thanks!

@RoiaMoto

5 ай бұрын

Hi Russel and thanks for the comment! Glad you've liked! I suppose you are referring to a previous video here on the channel where I attached the Mosko Mosko 4l Aux Pox to the side luggage support, right? I can confirm that it is still possible! I'll leave a few links. In case you buy on Amazon using my links I'll get a small "kickback" from Amazon. Thanks for the support! Rear Rack - roiamoto.com/CRF300LASRearRack Side Luggage Support - roiamoto.com/CRF300LASSideLuggageSupport Links for US: Tool Tube - roiamoto.com/UniversalToolTube-US Straps - roiamoto.com/VoileStraps-US Mouldable silicone - roiamoto.com/Sugru-US Links for UK Tool Tube - amzn.to/3SLXIGd Straps - amzn.to/3w6WLjb Mouldable silicon - amzn.to/484NCoj Links for Germany Tool Tube - amzn.to/3Utwm96 Straps - amzn.to/3Upl45Z Mouldable silicon - amzn.to/3w7A9iw

Hi Italo! That’s a really interesting and modular item especially with the AS luggage system. Can you please drop the link? Thanks

@RoiaMoto

5 ай бұрын

Thanks as always!! It’s this one: kzread.info/dash/bejne/mI2Ky7exmtKsqMY.html

Thanks for the video Doesn't that luggage support thing mess with the suspensions? It's basically adding a rigid link between the main frame and the sub frame? (Unless the sub frame is not that bold but the one further back?)

@RoiaMoto

2 ай бұрын

Hi Tony It doesn’t influence the suspension. The 2 mounting points are connected moving together with the luggage support. Cheers

Thanks for the tips! What country are you riding in at 7:40? It looks incredible.

@RoiaMoto

26 күн бұрын

Glad you enjoyed! It is in Montenegro! Here you can see more from it. kzread.info/dash/bejne/np91z6-flKnbhNY.html

Hey - nice vid - have you been able to install the tool tube? Can you show your solution? Thanks in advance

@RoiaMoto

2 ай бұрын

Yes I have. It’s pretty much what I’ve shown in this video.