The Ultimate $50 Drift Truck! [Project Hooni-Kei] WPL D12 Brushless Drift Truck
Ойын-сауық
Brushless 2s Powered WPL D12! Here's my 'Hoonigan' inspired Kei Truck, the 'Hooni-Kei'
All Items for the build below:
Wheel adaptors made by: / wcprcrace
WPL D12 Kei Truck (Best Service):
www.wpl-rc.com/collections/d-...
www.wpl-rc.com/?ref=TRC
Good Price:
www.banggood.com/WPL-D12-1-or...
ESC:
www.banggood.com/Racerstar-35...
Motor:
www.banggood.com/Remo-E9631-B...
Motor (shorter one to avoid moving the steering servo)
www.banggood.com/Racerstar-24...
Wheels:
www.makeitbuildit.co.uk/gt12-...
Stickers:
www.hoonigan.com/products/hoo...
'Hoonigan Project Cars' Video: • The Rotary Swapped Kei...
My KZread Tool: www.tubebuddy.com/youtube000
Facebook: / tomleysgarage
Instagram: / tomleyrc
Twitter: / tomleyrcgarage
Tomley RC © 2020 Tomley Media Ltd. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Tomley Media Ltd.
Пікірлер: 205
Drift duck, that's quackers.
@TomleyRC
3 жыл бұрын
Haha
Awesome! I just love the little low budget builds, that's what it's all about! Duck the haters, and keep on drifting! 👍
@TomleyRC
3 жыл бұрын
Cheers dude. Budget RC’s & builds are the foundations of this channel... and here to stay 😎👌
Just ordered this today.Looks great fun.Cant wait to customise it.
I love what you have done to your D12! 😊
I've bought 2 kits today thanks to your videos, the ftx outback and this bad boy, roll on next week 🕹 cheers
@TomleyRC
3 жыл бұрын
Sweet!
Wow that's so cool!! Love it!
Phil - yet again you´ve surpassed yourself! The ingenuity required to build both the crawler and this drift D12 in such quick succession is impressive. I like your solution to the sticky-out front wheels and your gearbox hack. As for the montage...JDM chic!
@TomleyRC
3 жыл бұрын
Thank you Del. I had a 1hr window in the weather to get the action shots! About 10 min after I stopped recording it went overcast and rained all day lol. Perfect timing!
@Del350K4
3 жыл бұрын
@@TomleyRC That was handy!
Looks really cool. Very ingenious Phil. Love the edit on the run part of the vid. Top work all round :-)
@TomleyRC
3 жыл бұрын
Thanks for watching Pete 😎
Incredible build, I’m really liking those trucks 👍🏻🍻
@TomleyRC
3 жыл бұрын
Thanks mate
Love the ingenuity. And it looks great 👍
@TomleyRC
3 жыл бұрын
Cheers mate
Awesome build, you done a awesome job, can't wait to get mine Phil 😀 great Video bro 👍😍😎👍
@TomleyRC
3 жыл бұрын
Thanks Tony. Hope you are keeping well.
Great work, love it, hopefully Brian, Hert, Dan and Suppy see this.
@TomleyRC
3 жыл бұрын
Hopefully... 😎
You can get some really cool body kits for it .it makes it look really cool
Awesome video, thanks for sharing 👍, nice set of wheels 👌
@TomleyRC
3 жыл бұрын
Thanks dude
Awesome work bro, can't wait to get my 2nd one delivered 👍
@TomleyRC
3 жыл бұрын
Thanks mate
Awesome truck🤩👍
Awesome me buddy another great and informative vid, cheers man
@TomleyRC
3 жыл бұрын
Cheers dude
Woww.. spettacolare...grande lavoro.. ciao Tomley
Wow! Very impressive truck. Excellent video Bro, as usual!! Thanks for share your work, helps me a lot and I enjoyed a lot too man!! Yeaah!!
@TomleyRC
3 жыл бұрын
Thanks mate
@panzadeviborarc9613
3 жыл бұрын
@@TomleyRC #Driftduck!
Ehi Tomley Fantastic mini rc truck😀💪👍👍👍
@TomleyRC
3 жыл бұрын
Thank you
Very cool 👍 nice footage also while it lasted
@TomleyRC
3 жыл бұрын
Thanks mate
Nicely done, Sir!
@TomleyRC
3 жыл бұрын
Thank you
Great montage at the end 👊🏻👍🏻
@TomleyRC
3 жыл бұрын
Cheers dude
You are the RC MacGyver hahaha love your videos.Carry on my friend.
You have talent mate, you are good at what you do. I just got mine delivered on the porch tonight and it’s worth the money in the first 5 min. Polished concrete (the garage). You should 3D print those wheels because you have customers in queue. The dog outside the fence is my dog without the fence lol. I’m impressed with the fun vs cost and I’m mad at you cus now I’m gonna make something cheap expensive again. Cheers!
@TomleyRC
3 жыл бұрын
Cheers dude. The adaptors are a cool feature. Maybe o will get some spares made for others
Fantastic
Sick!
I love the dog in the background on the other side of the fence thinking only if I could get in there I would have that thing.
@TomleyRC
2 жыл бұрын
Haha
Great vid again 👍 🤜🏻🤛
@TomleyRC
3 жыл бұрын
Cheers mate
Bout to buy my first 👌💯
Got one of these on its way, I think I'll 3D up some custom wheels for it. Not sure what I'll do for tyres as I'm primarily a 1/24 static model car builder.. But I'm sure I'll think of something! Cant wait to dive in to RC stuff!
@TomleyRC
3 жыл бұрын
If you can 3D print...you can be as creative as you want!
Oh Nice!
Thats awesome. Id love to see a speed run
@TomleyRC
3 жыл бұрын
Yes, if i can get the pinion to stay put...a speed run will happen!
love it
Howard the duck hanging on 😜 nice little drifter that made for sure!
@TomleyRC
3 жыл бұрын
Haha, yeah, he’s officially been named #driftduck
Ha. Nice mate
good looking also
Nice one. Nice duck.
@TomleyRC
3 жыл бұрын
haha cheers dude
Cool 👍🏻
Pretty fantastic work, dude! Looks great! 😃 About the motor mount and gearbox... There should be a better way! But who knows, maybe WPL can create something! 😃 Anyway, stay safe there with your family! 🖖😊
@TomleyRC
3 жыл бұрын
Yes, I didn't have a smaller can, so made do. But to be honest, you only need a little amount of wheel speed. So a brushed 370 would do
Hahahhah this is so badass!!
i love this project
@TomleyRC
3 жыл бұрын
Thanks dude
Ace! 👍
Waiting for you to fix it up and get drifting again, wicked cool. Got me drifting on way home from picking up the kids!!! .......... only joking........ lol
@TomleyRC
3 жыл бұрын
Haha... switching the BMW to drift mode 😎
i love the video! gonna get me one of these now! word of advice tho this gyro is not suitable for a drift build u have to get something like an AFRC. massive difference
@TomleyRC
3 жыл бұрын
Yeah needs a dedicated Gyro really.
Great build👍 you should put original tyres at the front for better drifting
@Nordlicht05
3 жыл бұрын
Mmh never saw that on a 4wd drifter.
@rab..
2 жыл бұрын
@@Nordlicht05 4wd ? must have some fancy Bluetooth front axles 😂😂👍
Thats badboy
J'aime beaucoup ( i like very well ) :-)
Cool
COOL cool cool, 👍👍👍💯
That's awesome!! The D12 Facebook group have some wild builds, and this is up there with the best. Love the name, by the way. Hooni-Kei. I wonder where you got that from?!! 🤔😁👍🏻
@TomleyRC
3 жыл бұрын
Bigrob69 on Insta? I was trying to find who to credit for the name 😎🤘
@roblowrie1969
3 жыл бұрын
@@TomleyRC, yeah, that's me. 👍🏻
Nice job . Quack quack 🦆
@TomleyRC
3 жыл бұрын
Thank you haha
Squeeze the shaft (looks at camera) several times with some pliers to distort/make ridges in the metal, all the little raised areas will make a tighter fit then use some jbweld or red loctite and it should stay put.
@TomleyRC
3 жыл бұрын
Cheers dude. I’ll give it a try 👍
"his name was Ernie (Errrrrnieeee), and he drove the fastest milk float in the West"🎶🎵🤣🤣. Epic
@bugsy742
3 жыл бұрын
That’ll have gone over a few heads! - incoming boomer comments inbound no doubt 🤣
@welshdave5263
3 жыл бұрын
Till one day a hard pork pie caught him right between the eyes.
@antrc
3 жыл бұрын
@@welshdave5263 u know it
@welshdave5263
3 жыл бұрын
@@antrc I've not heard it for years, I doubt I heard it first time around though, probably on some kind of TV complication show, back when to used to watch actual TV, not used live TV for about 2 years or more.
make you drool uncle....hehe
8:50 use wire strands for the pinion, I used to do this with tiny planes and helicopters when I had 1mm pinion hole and 0.7mm shaft. The method is thus.. 1. Pull some strands out of a multi strand wire. 2. Feed it through the hole and between two teeth, straight over one end, between another two teeth, this will give two strands in the hole opposite each other. 3. repeat the above till you have a minimum of 3 strands, or 4 or more. 4. Push fit the motor onto the shaft. 5. Cut all strands that go over the end that faces away from the motor. 6. Use tiny side cutters or toe nail scissors to cut down the sides of the pinion so that they don't foul the gear.
@TomleyRC
3 жыл бұрын
Thanks mate. Appreciate the tips :)
@welshdave5263
3 жыл бұрын
@@TomleyRC no problem, it worked great on little plastic pinions, it would be interesting to see if it can hold the torque, maybe the wire strands with glue.
You did allot of adjustments and mods to this truck and works nice good job
@TomleyRC
3 жыл бұрын
Thanks dude
bonkers cool
Have been tempted to buy on of these the first time I seen it on KZread, probably will eventually 🤔
I had a Quacking good Time watching this.the duck needs a helmet. lol
@TomleyRC
3 жыл бұрын
Haha 🦆
@ledchickenfpv7164
3 жыл бұрын
A duck helmet definitely needs to be 3d printed! 😉😁👍
As an old American, I LOVE my Deep Dish Wheels!!! 😁 I like their whole selection of Wheels and Tyres... But importing them to the Colonies is a bit pricey. They have no U.S. outlets. 😞 Man that thing is EPIC!! Good Racing EXCUSE too!! 😜 Noisey as HELL, but COOL!!😎 Drift Duck was a nice touch. Everything about it is awesome! I wish I could get one of those D12s. They look like so much fun. 😉 Carmine ✈🚂🚙
@CarminesRCTipsandTricks
3 жыл бұрын
..... And the Filming quality of the montage was outstanding!!
@TomleyRC
3 жыл бұрын
Thanks dude. Was fun to build
I think if you change your caster angle to suit the camber it will give you more grip as you can see the fronts are riding right on the inside edge of the tires
@TomleyRC
3 жыл бұрын
Yes, needs more adjustment. Caster is pretty limited on these
Wohooo!
@SharkysGarageRCandMore
3 жыл бұрын
Edward, check your Facebook messenger, 😁😜😁
That’s pretty cool. Have a real K-Truck (Honda). I’m getting into 1/5 scale do you happen to know if the have a K truck body in that scale??
Looks good,I def dig it but then again,I like things simple anyway,lol. If you don't mind trying a permanent fix to the gear,try JB Weld. That stuff works awesome,though messy to work with once mixed. The dog in the background at the 4:02 mark seems to approve of your drifting attempt................or worried 😄
@TomleyRC
3 жыл бұрын
haha, I think the Dog wanted a go!
This is amazing. I wish I was skilled enough to make this into a drift car lol. Would you ever sell it? Lol
@TomleyRC
3 жыл бұрын
Thank you. No intention of selling mate.
What gyro can you recommend to use with the stock radio system
Do these come with esc and motors or do you have to buy them separately
For the pinion try using thread lock on it....it will hold those pinion from moving up and down....
@shonen881
3 жыл бұрын
If u using glue it will slip again...try that and done that...hahahaha.....
if you told me a dude is gonna make a model of a rotary kei a year ago ima think you're insane
@TomleyRC
3 жыл бұрын
Haha... just need the Nitro Rotary & we are good to go 😎🤟
@gamingwithwaleed8903
3 жыл бұрын
@@TomleyRC bhi is ki price batao please
@gamingwithwaleed8903
3 жыл бұрын
@@TomleyRC hum khan se is ko buy karain
Hey there is a new metal upgraded transmission for the D12 on eBay for $17 U.S.
I am still waiting for my D12
What size driving figure did you use?
Have you tried using a drift-gyro on it? Does it plug in and work on it?
@TomleyRC
2 жыл бұрын
It would work, and these drift okay with a bit of tuning
Should make a c24 prerunner with that chassie
@TomleyRC
3 жыл бұрын
I love the Prerunner!
could you share the 3d model for the wheel adapters?
For the racestar 2435 motor, which kv should I go with and why? Im thinking the 4800kv for more drift torque?
@TomleyRC
3 жыл бұрын
Yes, 4800 should be plenty... could even go a bit lower if need be
@ep3
3 жыл бұрын
@@TomleyRC thank you for the reply! Will the stock 500mah battery be good for that small motor and esc you recommended?
how did u get camber
Really nice project you got here. Do you know if it's possible to fit a Wpl c24 body on this chassi? Or it is to big? Thanks
@modelnutty6503
3 жыл бұрын
I swapped a C24 and a B1 body no problem, the C24 AWD drifts now.. was my 1st upload here ever.
@BitseRodas
3 жыл бұрын
@@modelnutty6503 yeah thanks, but B1 chassis it's smaller than D12?
@modelnutty6503
3 жыл бұрын
@@BitseRodas they're right about the same
👈i liked👍👍
Where do I buy figures?Let me know the information.
I do enjoy your vids and watch when I can. Normally binge watch lol. But 6 adverts before the half way mark! I know that's how you make a bit of cash from the vids and need that to keep up with demand but they get so frustrating when they are every 2 minutes of video
@TomleyRC
3 жыл бұрын
Daniel, here's a screen shot of the mid role Ad's ... I only ever put 1 or 2 in. So 6 Ad's seems a bit extreme. But remember KZread will always show you an advert at the start... so I'm guess they are doing 'double ads' on this. But rest assured, I don't spam ads on my Videos as it ruins the watch time. prnt.sc/ve95ey
@danieljuul2447
3 жыл бұрын
@@TomleyRC oh I know KZread put in the ads at the start and it wasn't a major digg at you either. They seem to be running double ads on everything at the minute and some you can't skip which makes it a full on ad break lol. Again wasn't a total digg at you, I enjoy your vids and want you to keep them coming so don't mind so much but think KZread are possibly forcing more ad time on all of us as well?
If I buy the esc and motor will i need a different transmitter/receiver or will stock work?
@TomleyRC
3 жыл бұрын
You’ll need a different one
@ep3
3 жыл бұрын
@@TomleyRC thank you 🙏
How did you lower it's height? Awesome build!
@TomleyRC
3 жыл бұрын
Slightly bent the torsion bars at the front, and made a couple of lowering blocks for the rear
Oh.. I can not access your facebook of this link.
what your rim cm?
I'm doin it. That;'s All there is. xD
you gotta add more stickers for more HPs!
@TomleyRC
3 жыл бұрын
haha... that's certainly true!
Hey can someone help me i have some problems with my trq1
Now then t.g have you seen the price on banggood £50 now was around 42 when it came out weren't it but on wpl site its 37 but says its the china version dint know there were 2 versions did you and do you know the difference
@TomleyRC
3 жыл бұрын
Yes price fluctuates quite a bit. As for the 'China' edition, I think they have an International one coming. Not sure when, but I have seen some 'blueprints' and it looms cool!
How many screws to remove the body? I was hauling fine sand & now my steering iis not right, need to investigate under the body.
@TomleyRC
3 жыл бұрын
4 on the rear bed, 2 under the cab
@BrothrBob
3 жыл бұрын
@@TomleyRC Ty, I had to clean the servo/tranny from sand build-up I had in the bed, Now the servo works great again.
Try to replicate the wide arch kit
@TomleyRC
3 жыл бұрын
Yeah, was thinking that... maybe a future build
I need a drift duck.
Make small speakers for in the trailer
@Retrograde99
3 жыл бұрын
It is up to to make them actually work or even do it but whit them working would be sick
Does anybody have an 3s/3m brushless system they don't need my 2wd slash died and I can't afford the upgrade.
Dang i wish i had a rc kei truck but i dont have enough money
John Wick inside ? 😃👍
@TomleyRC
3 жыл бұрын
Nearly... haha
@marcinw.37
3 жыл бұрын
@@TomleyRC thanks to you i know i will buy a d12
like rc
For the pinion, green loctite. It's a bearing retainer, designed to secure the ID of bearings to a shaft. Some smaller models, helicopters specifically, use it for the pinion.
Who is the action figure