As a member of the URGI gang, I feel like it's inevitably one of the next major iterations of rifle everyone's going to have in their closet a few years from now. It's just so good.

@navyman8903

3 жыл бұрын

Agreed.

"Wow, it's heavy"...enter RIS II gang.

@navyman8903

3 жыл бұрын

You're not lying. I just held one today.

@patagucci8482

3 жыл бұрын

@@navyman8903 daniel quad rail is hunky

I appreciate you keeping the faith on that Vortex 1-10. I sold mine as soon as I got it. Thought it would be a magnified red dot like the 1-6 and it wasn't. I admire your patience though good sir. Thanks for the good content.

Knowledgeable. No grandstanding, good info. Subbed

Kinda wanted a MR556A1 upper kit, but any more the URGI is speaking to me.

@patd5021

3 жыл бұрын

I was in the same predicament. Shot both side by side, bought a URGI. Not saying the HK is inferior, I just liked the way the URGI handled better.

@TuckerDale89

3 жыл бұрын

Go with HK cause they’re both gonna run well but an HK has that extra cool factor

@realisrealite5554

3 жыл бұрын

@@TuckerDale89 And the hk is overgassed

@alexanderschooler579

Жыл бұрын

I know it’s a year later, but for what it’s worth, I have owned both an MR556 and recently the 12.7 OTG LWRC and I’m moving both of them for a URGI build.

Hey brother love your content. I just started following you about a month ago and always look forward to your videos. I occasionally see you on the AR snobs page LOL... Rock on

@navyman8903

3 жыл бұрын

Thanks man I appreciate it and I do poke around there from time to time.

I got my first 1/3 co-witness mount for my red dot and now I will be mounting all my optics that way so much more comfortable wow

great review, i was able to get my gen III 1-10 pretty close if not true 1x by adjusting the diopter properly to my eye. but theres no getting around the eye relief at 10x, still usable, but ill generally mil/range/id at 10x and then pull back to 6-8x to engage. love your setup, very similar to mine

@navyman8903

3 жыл бұрын

IT's a great optic at 8x for sure. 10x and I are still fighting. I have the diopter setup as best I can, but I'm still getting some bending/fish eye. I dunno.

I actually switched my super duty Lower to my PSA lower believe it or not and I love it. No more wobble whatsoever. Nice and tight. I switched every Geissele super duty part to my PSA lower so it has everything on it. Also every whole on my PSA was more in spec for better fitment than the Geissele and knights armament lower. I’ve seen some very top name Lowers have almost failing out of spec wholes for safety, trigger, take down pins, Mag well. My cheap PSA lower is one of my best in spec lowers. That may be hard for all you name brand junkies but that’s the truth. It fits all my uppers and lower parts like my colt lower.

@The_Black_Falchion

9 ай бұрын

The tolerances will naturally loosen over time, it’s an inevitability. That being said, it should come with tight tolerances at first.

Do you think that the 1-8 Credo would be better?

Your buddy is solid with that Weaver stance on the pistol.

@navyman8903

3 жыл бұрын

He's slowly picking everything up. He's very teachable, we're getting him much better with the rifle, and also working on the pistol. But this is his second range day running drills with us.

@beck4218

3 жыл бұрын

@@navyman8903 You can see he's fairly new as he's still limp-wristing a bit, but cool to see something other than isosceles.

Nice set ups , Geissele makes some awesome stuff, I run their SDC triggers in 3 of my ARs. The Vortex Razor gen 2 is better than the gen 3 for a do all carbine especially for a rifle that has a maximum effective range of 500 meters. You need a quick, easy to use and forgiving LPVO when shooting under stress and the gen 2 is still the best for those situations. Great review and thanks for your honest opinion of the gen 3

@navyman8903

3 жыл бұрын

The Gen 2 is still very useable and I agree with your assessment. I think I'm moving the Vortex onto my 16" precision guns with a bi pod.

@patrickferretti1265

3 жыл бұрын

@@navyman8903 that will be a nice set up, I know the Army is about to issue the SIG tango 1-6 to regular troops to replace the ACOG soon. I definitely could see the gen 3 being useful in a DMR role even on a .308 rifle.

I’m about to build a Pseudo URGI,DVOR/Opticsplanet had my stripped URGI as ready to ship for almost a year and I canceled it, found a black mk16 but I can’t decide between a 14.5 or 16 Triarc barrel. I’m big on recce guns and I’m used to using a 18in 556 and a 16in 308 in 3gun so length isn’t the biggest concern to me like the 11.5 or die types.

Do you know why Geissele is not offering the urgi with Daniel defense barrel thanks!? wanted to buy a second upper !

Great content. Thanks so much!

@navyman8903

3 жыл бұрын

I appreciate it.

@l337l0gan

3 жыл бұрын

@@navyman8903 fast becoming my favorite channel. I know this ain't a money thing for you, I've heard you say that in a video before. But my honest opinion, it is a possibility for you. Cheers

Have you tried 1.70 mount from badger? Vs 1.50. I'm looking to try the sig tango6 on my 12.5 build. I habe the 1.5 never looked through 1.7. What barrel profile is geisele. I think barrel weights and profiles really dictate the balance and setups your aiming for.

@navyman8903

3 жыл бұрын

The 1-6 and 1-10 are both in Badger 1.70 C1's. IT's a great height and I prefer it over the absolute mounts. These barrels are the 14.5 Daniel Defense government profile. Geissels's barrels have a thicker profile that tapers from the barrel nut to the muzzle. IT's very similar to a Hanson barrel from Ballistic Advantage, but thicker.

Hey dude; upgrading from my viper pst. Does the credo illumination hold up outside in bright conditions? (I live in the desert) Or do I just go for the razor or really bite the bullet and grab a kahles @navyman8903

Could you do a video for the 1-6 credo? I have 2x 1-8’s and I love them. I’m toying with selling my 1-6 vcog and getting the credo. Either the 1-6 ffp or 1-6 sfp bdc. Just wondering if it’s on the same level of brightness as the 1-8 accupower. I know the 1-8 isn’t nuclear but definitely usable.

@navyman8903

3 жыл бұрын

Sure I'll look into doing that. I also have a VCOG 1-6 so we can do a heads up.

If you get a sec . I have a urgi 14.5 upper with the Geissele irons , do you have any issues with your uppers getting the irons sighted in? I'm having to almost adjust the rear almost all the way to the right to zero the rifle. I'm just wondering if you have any issues with the ones you have.

@navyman8903

3 жыл бұрын

I have not, but I didn't zero my buddy's with the Geissele irons. Everyone is different and eyes/trigger pulls are different. You just might have that going on. Or the irons are out of spec. You'll know when you put an optic if it happens again. You might also want to have it checked with an alignment rod or bore sight.

Thanks again for a great video! Definitely prefer the Geissele Super Duty over Sig Virtus! Geissele less gas blowback in my face suppressed as well believe it or not.

@navyman8903

3 жыл бұрын

That .068 gas port is love. I love my 11.5.

Good story and description also. If you could number the top 3 best rifles right now in the military-civilian market, which would be?

@navyman8903

Жыл бұрын

For my money right now, LMT, Geissele, or something with a Criterion barrel. That would cover different price brackets, but give you a quality rifle.

How much is that trijican credo and badger ordnance mount?

I Run 4/ 6.5 PRC Bolts For 0-1400 + Yards. Where My Radians & Gisselles Range Ends The 6.5 Takes Over & Ammo Knocks Out The Rest Of The Extended Real Estate. Appreciate You.👍🤛🇺🇸

Is there a reason to have the mainly canted sights on the ejection side? I never seen the left side of the rifle used.

@slbarr88

3 жыл бұрын

Right handed ergonomics. A righty trying to quickly and accurately cant clockwise would be a wrist breaker.

Really appreciate you weighing these guns with a loaded mag - weighing the rifle seems to be an often overlooked part, and in an effort to artificially lighten the rifle, most will tell you how much their rifle weighs without a fully loaded mag in it

Which rifle do you like better, HK MR556A1or the URGI rifle set up? And why? Thanks man and keep up the good work!

@navyman8903

Жыл бұрын

Well I use my MR556 as an SPR, and I use the URGI as a fighting rifle. Realistically I would probably just take the URGI in general, but the MR556 lets me do very clean work with how I have mine setup with the 77gr TMKs.

got my 20in set up the way i wanted. 20in colt moe upper, throwback ergo grip, rifle buffer system, cav arms c1 stock, surefire g2x, aero a2 carry handle, poverty moe vert grip. you and me keeping a4's great OH yeah now after getting that xps-12 and not knowning it was called the murder television i thought that was SUPER funny. got a 512 on my 6920 moe fde so my throwback game is strong

@navyman8903

3 жыл бұрын

Nice man. Thanks for the update and the Murder TV's just work so well up close. Very fast and easy. You can stretch them out too.

I am running a 4x acog on my urgi. Need to get more time behind it but have been liking the ubr stock as well

@navyman8903

3 жыл бұрын

Sounds like a solid setup. I'll get getting an ACOG ACSS for my 20" down the road. Let me know how you like it if you don't mind.

@RKPTMcCoyBros

3 жыл бұрын

The reticle in the acss configuration is amazing. How they built it and put it in the acog really makes it nice. Now I also saw the same reticle design in a 1-8 scope and it wasn't the same. Must of been the simpler design. Now the acog itself is super clear and really like the size and weight. But that eye relief is bad. With training you could get use to it. But kinda wish I got a 3.5 acog (forgot the modle names) I wouldn't mind getting a 1.5x in acss for my 10.5 or future 11.5

@navyman8903

3 жыл бұрын

@@RKPTMcCoyBros Please let me know how you like that 1.5x. I might put one on a project down the road.

Tv murder box😂😂 F-ing priceless

I am a piston lwrc fan, but when I get a DI eventually, it will be a geissile

Is it stupid instead of buying the URGI clone to just build one but swap out parts I don’t like? Like instead of the gov profile barrel doing somthing else. And doing a 3 prong warcomp instead of the 4 prong? Will changing out those things affect what makes the URGI so great?

@navyman8903

4 ай бұрын

It kinda is, I would honestly get a geissele receiver set with the MK16 and one of their 14.5 barrels, then pick your muzzle device.

I’m purchasing a Geissele URGI 14.5 upper and I was wondering if I am able to combo the urgi with one of my lowers that currently uses a vltor A5 buffer system (extended buffer tube, green sprinco spring, and A5H2 buffer) instead of the super braided spring and H2 spring that’s included with the upper?

@navyman8903

3 жыл бұрын

I mean you should be fine. The URGI is peppy enough to run an A5 system.

@christophersok9551

3 жыл бұрын

Would it be more optimal to run a carbine length buffer tube with the braided spring and h2 buffer that comes with the upper? Recoil impulse wise? I feel like both will run reliable with no issues at all

@navyman8903

3 жыл бұрын

@@christophersok9551 I mean, my Super 42 and Geissele H2 run hyper smooth. The H1 that it comes with is sufficient for non-suppressed use.

@christophersok9551

3 жыл бұрын

I’ve gotten a mint one from tacswap. Only 100-200 rounds through it only. It’s pretty sweet man!

"Im gay for geissele "😂👍

The 2nd rifle needs irons. Bottom line for a duty rifle

I almost bought the credo 1-6 but I went with the steiner 1-4 instead. Did I fuck up?

@ComeOnPelican91

3 жыл бұрын

You did if you were planning on competing in an event. Outside of events like multigun anything is possible. Mark McClosky had iron sights, Kyle Rittenburger had a red dot which he may not have used. Edit to add: some instructors of DMR courses have you shooting at extended ranges, so you'd miss the benefits of a 1-6 or better there as well.

@navyman8903

3 жыл бұрын

Honestly they're both really good. I'm betting you got the Steiner P4Xi purchased and mounted for less than the price of the Credo. The credo is a great FFP 1-6 option if you're looking for that. But I'm plenty happy with my P4Xi on my 11.5 and plan to buy a couple more in the future for other builds. For me the optics I prefer are, Steiner P4Xi for the 1-4x bracket. The Credo FFP red mil for the 1-6 bracket. Accupower or Credo red MIL for the 1-8 bracket. And the Vortex so far for the 1-10, but I'm possibly only ever going to get 1 more 1-10. I think your AR better have a bi pod on it to run the 1-10.

I just picked up razor a 1-10 for $1799. I’m going to run it on a scalarworks mount (no integrated 45 mount). Any experience with Arisaka or Dino Boy offset mounts?

@navyman8903

3 жыл бұрын

I'm just getting into Arisaka stuff with their light mounts and SMR attachments for my HK. But I have a few projects that might use their Arisaka off set mount. I'll let you know if I get one before you do, and if you get an Arisaka I would be very interested in your feedback. Also screaming deal on the Razor 1-10.

@navyman8903

3 жыл бұрын

@@Hugh_Jaynus I did a 200 because of the MIL reticle, I'm sure the MOA will need a 100 based on the reticle.

@Hugh_Jaynus

2 жыл бұрын

@@navyman8903 sorry it took so long to give feedback, but I did pick up the arisaka 45 at a 1.93 height to match the scalarworks mount height. The arisaka mount is very nice. I prefer it over the integrated mounts like badger or unity. I will say the razor did not last long though. I sold it within a couple months due to the fisheye and 1 power reticle. I’ll probably pick up a gen 2 e in the future though.

@navyman8903

2 жыл бұрын

@@Hugh_Jaynus thanks for getting back to me I appreciate it. And you're just 1 more person to add to those that have told me they sold their Razor Gen 3.

Bro, I’m right with you on Geissele but instead of HK it’s Knights for me. I have an older Ldub 14.7 piston gun that is super accurate and been utterly reliable but if I had to grab one to run out the door it would be either be my KAC or Geissele. They both feel like they are perfectly gassed and shoot lights out. Nice review and agree with it all, I’ve got a Kahles 1-6 on my Supa Duty and aimpoint on the KAC but want to add a dot to the Supa. Rick

@navyman8903

3 жыл бұрын

Unfortunately now I'm on Geissele, HK, KAC and LMT. But I'm calling it there lol. But maybe a DD 10.3 in 300BLK.

@theprepperrevelator

3 жыл бұрын

@@navyman8903 those are all top tier Guns! I would love a 300 if I had a can. It’s only money right! If I hadn’t gotten the semi custom 1911/2011 bug there would definitely be some more long guns in the collection.

Is that an 18650 plhv2? Is so, i would recomend you getting a mod button/hot button (if you can) instead of sr07. The sr07 actually reduces the performance of 18650 because they can't delivered enough AMP loads. Take a look at 1911 syndicate WML series, they briefly touch on this.

@navyman8903

3 жыл бұрын

IT is an 18650. My buddies and I tested this and saw no difference in performance. My 11.5 SD has an 18650 PLHV2 with the mod button. I've heard it both ways, so I'm not coming at you sideways. I've also had the connecter on the mod button come out of the rear of the tail cap twice. But more on that later. My philosophy is mid to long range rifle with an LPVO gets an OKW with an SR07 for temporary/constant on. The short bois, dot or LPVO get the PLHV2/mod button for speed.

Would you recommend the Trijicon over the Vortex?

@navyman8903

3 жыл бұрын

So that's a tough call bro. The Trijicon 1-6 is very handy and I find myself drawn to using it more than the Vortex. The Vortex is a top tier optic, but I wouldn't put it on anything that isn't a 16" SPR. I'm going to buy 1 more Vortex down the line and call it a day on those. I'm probably going to have the most Trijicon 1-6's. The FFP red MIL is where it's at, very nice and easy to use. Zeroed fast. I really have nothing bad to say about it. IF you're putting it on a gun you plan on using for fighting or moving around a bunch, I would go Trijicon Credo. Plus you can get 1 bought and mounted for less than a Razor Gen 2 1-6.

@jessitaylor4170

3 жыл бұрын

@@navyman8903 thank you, you just helped me out with choosing the Credo but I've been thinking about getting the 1-8 model.

@jessitaylor4170

3 жыл бұрын

I just might go with the 1-6 FFP red MIL.

I was thinking you had 3 geissele's I only have one but now I am thinking I need a 14.5 in my life . Once I put a blue force gear sling on my AR I want one for every gun best sling I have ever used .

@navyman8903

3 жыл бұрын

I run them on everything. I've never had an issue and the noise discipline is pretty decent. I really like my 14.5. I have a 14.5 SD on order when I get it is the question.

Is the DD barrel the only difference between the urgi and the geissele supper duty rifle?

@navyman8903

3 жыл бұрын

The BCG is a Daniel or colt and the SD rifles have a Geissele receiver.

@Wmbhill

3 жыл бұрын

The SD doesn’t have the little set screws on the rear of the handguard (depending on the model), it has the puzzle piece looking interface at the UR/HG junction.

@tyrellandonmorris07

3 жыл бұрын

Thanks. I know there are little differences. Im currently debating between the Geissele SD and a DDm4a1.

@navyman8903

3 жыл бұрын

@@tyrellandonmorris07 The Geissele SD's are very solid rifles. The Daniel is also good to go. I like the geissele a little bit better.

What’s the weight on the rifle with the Vortex scope on it??

@navyman8903

2 жыл бұрын

I think it's 11lbs 6oz. I forgot to put it in, it's in the URGI review.

Can you get the URGI in different lengths? Failing that, how hard would it be to put a long barrel on it and be "true" to the specs? Say 18"s? Love your reviews. Really appreciate this one and your other URGI reviews. I would love to see a video where you build your ultimate lower.

@navyman8903

3 жыл бұрын

The URGI comes in 14.5, 11.5 (newest) and 10.3. I wouldn't say an 18" would be true specs. Plus with an 18" you can go rifle length which is hyper smooth. I would build an 18" over swapping barrels from the 14.5. The 14.5" is remarkably capable.

@rickgrimes931

3 жыл бұрын

@@navyman8903 - You ever build an 18" barreled AR you like as much and I will watch that with popcorn and headphones. Thanks much for the reply.

Trijicon 1-6 Credo at $850 vs PX4i at $650 (similar use/setup/balance, 14.5, gov profile, SF flash hider). Twin sister riffle has T2+3x mag for NV. Very little on the Credo out there. Help me Navyman, you're my only hope.

@leroyb1876

2 жыл бұрын

Credo HX 1-6 is daylight bright. I have a Steiner also, both are great but I prefer the Credo HX

where can I even fine one? It seem like Geissele never really restock these.

@navyman8903

3 жыл бұрын

They come back in stock bout once a year these last 2 years. Before they were very heavy out there in the market, but they've really slowed down production. I would sign up for ALL of the sites you can, to get an email notification.

@Shoppincart

3 жыл бұрын

@@navyman8903 From ur past experience, does Geissele only restock on the Uppers alone? I've only seen primaryarms website list it as complete AR but Geissele only list their uppers.

@realisrealite5554

3 жыл бұрын

They're concentrating on the super duty rifle and pistols

bendy boi FTW. Hammer forged, CL and the REBCG's wipe clean (get some). About 30% lighter as well.

@navyman8903

3 жыл бұрын

Oh after cleaning the baby bendy boi yesterday after running suppressed, I'm absolutely putting the REBGC in everything lol.

@beck4218

3 жыл бұрын

I ran 500 through my KAC 11.5 with the REBCG carrier and the E3 bolt and it wiped clean in 30 seconds. Suppressed with my Mini2. The only thing that took some time was the phosphate E3 bolt. You'll never want to run anything else.

@Hazmat0357

3 жыл бұрын

Can confirm the wipe clean. Remember always wipe your ladies front to back 👍🏻

@beck4218

3 жыл бұрын

@@Hazmat0357 Piston guys malign DI and DI guys malign pistons... but these new BCGs make pistons a solution in search of a problem. I have B&Ts and HKs as well.

@beck4218

3 жыл бұрын

@Travers Kilroy Cooper Alvirez Cool story, Bro. We are talking about ease of cleaning.

Every time I’m about to buy one, I shoot my SR15 and then don’t lol. I’m going to wait for this madness to calm down before getting one. Your videos make it hard though.

@navyman8903

3 жыл бұрын

Well if it makes you feel better I'm hunting down a 14.5 SR15 upper to replace the SR 15 my ex took with her.

@MexicanNinja82

3 жыл бұрын

@@navyman8903 that does not make me feel better, that hurts me too read that. My ex took my dog, I feel your pain bro.

Shipmate, I copied this exact setup. Could you please do a video on how to zero a offset red dot? Great content

@navyman8903

2 жыл бұрын

Thanks! I will be duplicating his setup but with an offset Comp M5. I will try to keep that in mind when I get it setup then move to zero. IT's going to be a little bit though.

The thing that annoys me about the Badger Ordnance Condition 1 mount is that the offset J-Arm mount sits at the same height no matter which height the scope mount is (1.54, 1.7, or 1.93). The offset mount is always at 1.7, so if you've got the 1.93 mount, you have to dip your head down when you transition, or if you've got the 1.54 mount, you have to raise your head when you switch sights. Kind of a dumb design decision on Badger's part. I want the 1.93 mount, but will have to get a separate offset mount like the Arisaka mount to get both the red dot and LPVO to sit at the same height. Unity Tactical makes a nice LPVO mount with integrated offset mount with both sitting at the same height, but in their infinite wisdom, they designed it for right-handed shooters only...No ambi functionality. These companies just don't want my money...😩

@navyman8903

3 жыл бұрын

IT works for me because I run their 1.70 mounts, but that is indeed frustrating. You would think they could make a slightly longer J arm. Maybe call them and see if it's in development?

You may think people with higher mounts look like idiots but I am thinking about purchasing the Unity Tactical Eotech mounts for the magnifier and sight but due to numerous injuries my neck and shoulders are very damaged so I am left with no alternatives. Prefer the Unity set up over Scallarworks because of the magnifier mount. Take care.

@navyman8903

3 жыл бұрын

It's all based on needs. But I agree. Some of these dudes are running hyper high mounts for no reason. But I get it with injuries and especially if you're taller. Being upright is not always advantageous in bad situations. But honestly injuries dictate how you move forward, so do what you need to in order to stay dangerous! Take care on your end.

If your are running it at 3-4 constantly why not a red Dot with a 3x magnifier that would be lighter than the set up you have. I can see the set up you have with a 4-12 or 4-16 where you can stretch out to longer distances.

@navyman8903

3 жыл бұрын

I get your point, there is a place for that. But I like the capability variable gives you. IT's easy to snap into a 3x or 4x, but if you have a supported position being able to kick up to 6 to get better PID or SA, OR kick down form 6x to 3x or 4x for wider FOV is excellent. The 4-16 is a great option as well, but that's a much different application. Having a do it all AR gives you options, but doesn't necessarily give you highly specialized capability. But it's a buyer's market, so you can buy it and build it however works best for you.

@MarkBadia

3 жыл бұрын

@@navyman8903 Cool thanks, I was trying to understand your perspective better. I have been working on the Bindon aiming method to be able to use a 3x with both eyes open to have the ability to shot up close while being able to reach out 100 to 200 yards with minimal effort. I have also looked at a 2.5 X 10 Primary Arms and coupled with a red dot would give you reach while just going to the red dot will give you speed up close. Thanks for getting back to me.

Hook us up with the Badger mount.

Subbed

@navyman8903

3 жыл бұрын

Thanks man.

There really is no substitute for getting behind the gun and shooting it, but guys like you are the next best thing. With that being said, my “workhorse” barrel that I would recommend to anyone who isn’t worried about specific muzzle devices is the SOLGW 13.7. Between having shot one in competition, seeing what other guys have to say about it, and shooting a lot of barrels I didn’t like *cough* ROSCO *cough* I can confidently recommend them. That’s aside from the obvious FN, Colt, and new DD stuff.

@navyman8903

3 жыл бұрын

I almost bought a Rosco for a 12.5 but something held me back. I'm glad to hear your input. I bought a BA 12.5 government and have a Criterion 12.5 on order. But that's about all I'm going to do with that. I'll be getting 2 more 14.5's at some point.

@fabiangonzalez-cortes8894

3 жыл бұрын

@@navyman8903 My buddy has a Rosco 12.5. It's punchy even with an H3 in it. Idk how people can comfortably peddle that kinda stuff. Not everything has to be gassed competition soft, but idk why Rosco spec'd that thing to shoot steel cased reliably in the arctic. Oh, and it broke a bolt prematurely too. The extractor yeeted itself.

@fabiangonzalez-cortes8894

3 жыл бұрын

@@navyman8903 Do keep us in the loop on the BA and Criterion. Same buddy bought a Criterion 13.9 to replace the 12.5. It shoots great. Tiny groups after getting zero'ed and you don't need a VLTOR system to tame it. Criterion recommends against it. My buddy managed to overspring it with a VLTOR system and H2 buffer, so it wasn't entirely reliable even with brass and a suppressor.

@navyman8903

3 жыл бұрын

@@fabiangonzalez-cortes8894 Most people don't have any idea how things SHOULD shoot. Your buddy knows since he changed it to an H3, but some dudes think it's just supposed to be that way. Which is incorrect lol. As we know. I'm really excited for the 12.5's. The Criterion I haven't come up with a name yet, but the BA 12.5 is going to be the Greenie weenie........I'm going to paint it, so couple shades of green (probably ODG and Ranger Green)/sand to blend in here. But I'm going to set the uppers up identically. Just slightly different length SLR rails to keep them apart. BA is getting the 11" (10.93...) and the Criterion is getting the 11.7" rail. I plan to do same optics and muzzle devices/internals. Might even use the same lower to keep testing fair.

My 11.5 is a beast. They did a great job, sorry

@navyman8903

Жыл бұрын

Yeah the 11.5 URGIs are great. I'm planning to get one here soon.

IZ THAT A SUUNTO WATCH YOU'RE WEARING??

@navyman8903

3 жыл бұрын

Yessir. SUUNTO core all black military.

What's a URGI??

@navyman8903

3 жыл бұрын

Upper Receiver Group-Improved

I prefer the Daniel Defense Ris Rail

Why out back up irons on a rifle like the second two? It’s just super redundant and you will absolutely never use them. Bet they’re not even zeroed lol just take them off and save some weight

I had one of the first batch URGIs and sold it F in the chat

@navyman8903

3 жыл бұрын

Mine is also first batch. F.

“A lot of experience on the platform... Shot less than 5k rounds through it. 😒🙄

@navyman8903

3 жыл бұрын

I mean, no one pays for my stuff so........I also don't bullshit my round counts like a lot of people on the internet do. At least I didn't say I had a Poverty Pony with 28K rounds and no issues.

@GGGGGGG.

3 жыл бұрын

That’s like 5 grand in ammo these days.. that’s a lot IMO.

@steffensamlal1854

3 жыл бұрын

@@navyman8903 well said!

Lol I am also gay for geissele after I got my 11.5

@l337l0gan

3 жыл бұрын

That's what I'm drooling over right now. My DD mk18 is so short I sometimes have issues running cheap ammo unless I'm running a can. I think stepping up to a good 11.5 barrel will solve that for me too. Plus I don't own a geissele urg yet

@navyman8903

3 жыл бұрын

The 11.5 Super Duty is awesome and I'm very happy with mine. I have more coming up on that soon.

@USMC-1911

3 жыл бұрын

I also have the 11.5 a little heavy but a super solid build .

On that second set up, why the fuck wouldn’t you just put that light on the left side or just take it off? It’s useless on that side