Make sure your FNS-9C isn’t part of the “Safety Bulletin” (recall). Mine was, and FN sent me a shipping label, and I sent them my pistol, so they could replace the striker. They had it back to me in 7 days exactly. I didn’t like the fact that the replacement strikers are MIM, and were prone to breaking; so I replaced mIne with an Apex striker, which is a billet striker. I have had zero issues with my FNS-9C, and use it as my EDC, 99% of the time. In the winter, I’ll carry my GEN3 G23 or GEN3 G19.
@gator7082Ай бұрын
I definitely see the draw in the G26, it came up just a tad too small for my taste. I had actually gone into the shop with the intention of getting one, and came out with a CZ P10S. I just did the sub compacts over the micro stuff.
@Mmafanufc122 ай бұрын
LETS GO HAVE FUN TONIGHT MAN!!!
@almanji8046Ай бұрын
I love them both cuz. ❤️💯🙂👊👍👌✌️🙏
@BadhagisАй бұрын
You should try the silicon carbide grip texture on your Glock...I did mine and love it. And really pretty easy to do too.
@steven3379Ай бұрын
Well at least I got a Trump ad during the Glock commercial.. 😂😂 Oh by the way I took my brand new P365XL TacPac to the range today, (lubed only, didn't clean it) 99 rounds (dropped one) of Blazer 115gr fmj, zero malfunctions. It seems accurate at 10yds, mags were a bit tight, but got 12 rounds in all 3 that came with the pistol. I got a full 3 finger grip on the grip module, optic ready (rear sight separate from the optic plate), I haven't tried the holster yet. I might see about getting a "Macro" grip module or at least comparing it the XL grip. Good video, I might check out a FN in the near future!
@sebsaeyaАй бұрын
Love the 26, have you considered or tried the sw m&p subcompact? The 12+1?
@PanarchyTheaterАй бұрын
The FNS9C looks super nice. Problem is, Don't think I've seen it for sale ANYWHERE
@JayRTactАй бұрын
You can swap the mag release out the full size fns will fit or you can get a extended mag release it’s a simple install
@brianrobertsii4620Ай бұрын
Could you do a new comparison of all of your subcompact pistols and rank them? I'm interested in seeing how the xdm compares to the p10s.
@Amir_NassirАй бұрын
Best subcompact (imo) is HK P30SK but SPN doesn't know what DA/SA is
@jayrock1213Ай бұрын
Had the fns 40. Great shooter. Wish I held on to it
@Rguy516Ай бұрын
The fns 9c is a accurate shooter i liked mine alot but what started worrying me was the striker breaking issues never happened to me but I've seen it on forums
@nitegoat1369
Ай бұрын
I replaced mine with an Apex striker - problem solved.
@laurencel.7980Ай бұрын
I find my IWI Masada S very accurate and reliable, have zero issues
@saltwatersaddletramp7229Ай бұрын
That FN looks very much like a S&W M&P which means it’s a really good looking pistol
@_s1k_Ай бұрын
Everyone should own at least one Glock and FN
@keysgirl7699Ай бұрын
Real nice. I always liked FN pistols. Not including the Hi Power even. Just the new stuff. The trigger is different. Not bad. Just different.
@zachaddington5264Ай бұрын
Fn one my fav like the 45 and 509
@kenshin034Ай бұрын
Used FNS9C,MP9/40 1:2.0 3.6’s over a g3C any day 😂,just stipple the rest of the untextured grip palm,finger rest,front half of trigger underguard,and trigger pad(hinge triggers) shoot it till something breaks,the FN/MP/Glocks also have good frame to slide overlay on SubC’s for 👋🦈😂
@chucksneed3339Ай бұрын
GLOCK 26 APPRECIATION
@WesTexanАй бұрын
if they ever update the M&P SC ill make that my carry.
@ghostduck-ky3bnАй бұрын
P365 for the win
@patricksnyder9530Ай бұрын
Thoughts on the new cr920x?
@deucedeuce1572Ай бұрын
I wish I could find some good touch up markers or paint or whatever to cover up scratches and wear marks (to cover up bear steel). I haven't really found any except for solid black one's (black pain markers in some cases, but also metal blackeners ad bluing). Some of them work alright... but they just don't work on the majority of guns. It seems like the majority of slides are dark gray and not really black too. I also don't think that nitride/tenifer steel can be blackened with blackeners. I guess that if nitride/tenifer steels are worn down to where you can see steel/silver, the nitride/tenifer is still there and cannot be blackened like bare steel can. I haven't tried on many guns, but I tried on a P320, a P365 and an aftermarket black nitride slide so far and the blackeners didn't work on any of them. They did work on blued steel, but they don't match the bluing, because they're BLACK. The best way to fix bluing is usually to just re-blue the worn areas again. (Forgive the rant. I'm sure many of you know I do this by now. lol).
@thePreparedFatherАй бұрын
Man, idk either that or the 509 or reflex
@zachaddington5264Ай бұрын
There is a Glock 43 for sale where I live for 425 would have to buy pinky extension for it it would be the same size as the Glock 26 but with less rounds
@thomascrompton7775
Ай бұрын
There is a stainless barrel model at my dealer for 349.00. I passed and bought a 26 for 289.00.
@mi777ke777
Ай бұрын
43x is almost that price. The extra grip length is worth it and fits the hand like a glove. I wouldn't say don't get it its a Glock and will run forever but the 43x grip is near perfect and you can run 15 round mags ez from PSA
@michaelgandy4684
Ай бұрын
Buy it. With Mag guts you get 8+1 and much thinner
@scottschreiber6008Ай бұрын
When are we getting an update on the Stoeger mc9? Is it making its way up the ranks yet?
@brandongriffin9523Ай бұрын
Love my fns 40. 🎉
@glocksNgrippers2 ай бұрын
I know you mentioned both the Gen 3 and Gen 5 G26, what are your thoughts on the Gen 4 Glock 26?
@OOICU812
Ай бұрын
I was wondering the same.
@jeffsharp4982
Ай бұрын
Probably avoided them due to the issues there were when they first came out.
@glocksNgrippers
Ай бұрын
@@jeffsharp4982 i did hear there were some issues with the earlier releases.
@HVACR_ToolNutАй бұрын
I haven't owned a FN yet and your videos keep pushing me closer and closer to getting one. I just think I should get a G26 gen 5 MOS first. Wdy think?
@chucksneed3339
Ай бұрын
Glock 26!
@mi777ke777
Ай бұрын
If you want a comfy shooter the 26 is the way to go. Plus it runs all parts from any double stacked Glock in a SHTF scenerio
@OOICU812
Ай бұрын
If you want even more versatility consider the G27.
@michaelgandy4684Ай бұрын
The sweet spot for you
@intoeverything2023
Ай бұрын
Yepp....dude is a one trick pony.
@BlackMetalBassАй бұрын
I bought a Glock 26 and it pinches the pinky. Do you know how to improve fix this? A video about how to fix this would be awesome
@Kh2456
Ай бұрын
Yea, ditch your mag pinky extension.
@JP-ro2yiАй бұрын
Is the G26 the same dimensions as the G27? I want to get a G27 for concealed carry.
@thegreatzacksbi
Ай бұрын
Yes just different caliber
@texasrigged5875Ай бұрын
Get the fns9 and 40 combo standard size
@garrettlosabia3818Ай бұрын
What’s your go-to G26 pocket holster man?
@PoisonSpyder038
Ай бұрын
Vedder pocket locker
@richardrenaud8053Ай бұрын
I know u luv the Glock 26 but it is just to wide for most people and that is hard for most people to conceal.
@gerardmcquade9102Ай бұрын
to me even the gen 5 Glock isnt ambi
@chevykent77Ай бұрын
Traded plus cash for a sig 365xl hands down smoked the fn9c in every way.....js
@inurfaceson9722Ай бұрын
26 or 43x?
@chevykent77Ай бұрын
New s/w 2.0 better then that Discontinued for a reason
@jamesw5353Ай бұрын
Need to add Stoeger into the battle especially for the price.
@keatonjorgensen8793
Ай бұрын
My neighbor has one that has been back to the factory multiple times and it still won't run right.. And I sure see lots of them for sale on the used market
@jamesw5353
Ай бұрын
@@keatonjorgensen8793 Always outliers just like there are bad Toyotas but overall extremely reliable.
@keatonjorgensen8793Ай бұрын
I hate the FN ambidextrous mag release.. They will drop a mag even if you are wearing a proper holster
@nitegoat1369
Ай бұрын
Mine never has.
@Kh2456Ай бұрын
Why in the Lord do you need thirteen G26’s?
@matthewbeaver5026
Ай бұрын
9 40 357sig. Then those 3 again 3 times for each generation. (Gen3-5) that's 9 throw in a couple Mos and you're there. These are the type of buyers glock wants. Add front serrations and they gotta update. Even though at heart it's the same damn thing it was 35 years ago..
@AyeCobyАй бұрын
The CZP10S is better than the Glock 26 in my opinion 🤷🏾♂️ Loved the Vid tho 🔥
@mi777ke777
Ай бұрын
I would argue that the 26 is better in the fact that its parts are easily available and if you have to search for things in a apocalypse you'd be able to run a 26 finding pieces of any of the bigger models G17/19/34 and get it running rather than the CZ thats very niche. Don't get me wrong tho I love CZ and the P01 is my full size carry, but the 26 is the most versatile Glock in existence and the perfect back up pistol
@AyeCoby
Ай бұрын
@@mi777ke777 when you look at the cost of the CZ compared to the Glock26 it’s literally half the price. And Using the Apocalypse as an argument is crazy cause that’s never going to happen. My Argument is More Based On Price and Performance.
@HamFlare12345
Ай бұрын
@@mi777ke777 If any apocalypse happens, ruger 10/22 with supressor and subsonic ammo is the way to go.
@eindride1268
Ай бұрын
@@mi777ke777 Best means it's better, having a bunch of shitty aftermarket doesn't make Glock better just because Glock owners have convinced themselves that it's hard to get other gun parts 😂😂
@yusefjohnson3533Ай бұрын
Stop biting those nails bro. Don't forget you're also a hand model.
@XuroX.
Ай бұрын
Most people are here to look at the guns, not the dudes hands.....
@XuroX.
Ай бұрын
Sus
@scottbryant9425Ай бұрын
Don't mean to pick here but the whole "battle tested, law enforcement" thing is a bit of a myth. Something like 80% of law enforcement officers in the US never discharge a firearm in the line of duty. If they do, they certainly aren't wild westing their way through the streets firing 1000s of rounds. There are competitive shooters and avid hobbies that shoot many thousands of rounds per year, which is far more than the vast majority of law enforcement officers.
@DavonStewАй бұрын
Fns always look cooler than every pistol but I’m going with Glock
Пікірлер: 73
Make sure your FNS-9C isn’t part of the “Safety Bulletin” (recall). Mine was, and FN sent me a shipping label, and I sent them my pistol, so they could replace the striker. They had it back to me in 7 days exactly. I didn’t like the fact that the replacement strikers are MIM, and were prone to breaking; so I replaced mIne with an Apex striker, which is a billet striker. I have had zero issues with my FNS-9C, and use it as my EDC, 99% of the time. In the winter, I’ll carry my GEN3 G23 or GEN3 G19.
I definitely see the draw in the G26, it came up just a tad too small for my taste. I had actually gone into the shop with the intention of getting one, and came out with a CZ P10S. I just did the sub compacts over the micro stuff.
LETS GO HAVE FUN TONIGHT MAN!!!
I love them both cuz. ❤️💯🙂👊👍👌✌️🙏
You should try the silicon carbide grip texture on your Glock...I did mine and love it. And really pretty easy to do too.
Well at least I got a Trump ad during the Glock commercial.. 😂😂 Oh by the way I took my brand new P365XL TacPac to the range today, (lubed only, didn't clean it) 99 rounds (dropped one) of Blazer 115gr fmj, zero malfunctions. It seems accurate at 10yds, mags were a bit tight, but got 12 rounds in all 3 that came with the pistol. I got a full 3 finger grip on the grip module, optic ready (rear sight separate from the optic plate), I haven't tried the holster yet. I might see about getting a "Macro" grip module or at least comparing it the XL grip. Good video, I might check out a FN in the near future!
Love the 26, have you considered or tried the sw m&p subcompact? The 12+1?
The FNS9C looks super nice. Problem is, Don't think I've seen it for sale ANYWHERE
You can swap the mag release out the full size fns will fit or you can get a extended mag release it’s a simple install
Could you do a new comparison of all of your subcompact pistols and rank them? I'm interested in seeing how the xdm compares to the p10s.
Best subcompact (imo) is HK P30SK but SPN doesn't know what DA/SA is
Had the fns 40. Great shooter. Wish I held on to it
The fns 9c is a accurate shooter i liked mine alot but what started worrying me was the striker breaking issues never happened to me but I've seen it on forums
@nitegoat1369
Ай бұрын
I replaced mine with an Apex striker - problem solved.
I find my IWI Masada S very accurate and reliable, have zero issues
That FN looks very much like a S&W M&P which means it’s a really good looking pistol
Everyone should own at least one Glock and FN
Real nice. I always liked FN pistols. Not including the Hi Power even. Just the new stuff. The trigger is different. Not bad. Just different.
Fn one my fav like the 45 and 509
Used FNS9C,MP9/40 1:2.0 3.6’s over a g3C any day 😂,just stipple the rest of the untextured grip palm,finger rest,front half of trigger underguard,and trigger pad(hinge triggers) shoot it till something breaks,the FN/MP/Glocks also have good frame to slide overlay on SubC’s for 👋🦈😂
GLOCK 26 APPRECIATION
if they ever update the M&P SC ill make that my carry.
P365 for the win
Thoughts on the new cr920x?
I wish I could find some good touch up markers or paint or whatever to cover up scratches and wear marks (to cover up bear steel). I haven't really found any except for solid black one's (black pain markers in some cases, but also metal blackeners ad bluing). Some of them work alright... but they just don't work on the majority of guns. It seems like the majority of slides are dark gray and not really black too. I also don't think that nitride/tenifer steel can be blackened with blackeners. I guess that if nitride/tenifer steels are worn down to where you can see steel/silver, the nitride/tenifer is still there and cannot be blackened like bare steel can. I haven't tried on many guns, but I tried on a P320, a P365 and an aftermarket black nitride slide so far and the blackeners didn't work on any of them. They did work on blued steel, but they don't match the bluing, because they're BLACK. The best way to fix bluing is usually to just re-blue the worn areas again. (Forgive the rant. I'm sure many of you know I do this by now. lol).
Man, idk either that or the 509 or reflex
There is a Glock 43 for sale where I live for 425 would have to buy pinky extension for it it would be the same size as the Glock 26 but with less rounds
@thomascrompton7775
Ай бұрын
There is a stainless barrel model at my dealer for 349.00. I passed and bought a 26 for 289.00.
@mi777ke777
Ай бұрын
43x is almost that price. The extra grip length is worth it and fits the hand like a glove. I wouldn't say don't get it its a Glock and will run forever but the 43x grip is near perfect and you can run 15 round mags ez from PSA
@michaelgandy4684
Ай бұрын
Buy it. With Mag guts you get 8+1 and much thinner
When are we getting an update on the Stoeger mc9? Is it making its way up the ranks yet?
Love my fns 40. 🎉
I know you mentioned both the Gen 3 and Gen 5 G26, what are your thoughts on the Gen 4 Glock 26?
@OOICU812
Ай бұрын
I was wondering the same.
@jeffsharp4982
Ай бұрын
Probably avoided them due to the issues there were when they first came out.
@glocksNgrippers
Ай бұрын
@@jeffsharp4982 i did hear there were some issues with the earlier releases.
I haven't owned a FN yet and your videos keep pushing me closer and closer to getting one. I just think I should get a G26 gen 5 MOS first. Wdy think?
@chucksneed3339
Ай бұрын
Glock 26!
@mi777ke777
Ай бұрын
If you want a comfy shooter the 26 is the way to go. Plus it runs all parts from any double stacked Glock in a SHTF scenerio
@OOICU812
Ай бұрын
If you want even more versatility consider the G27.
The sweet spot for you
@intoeverything2023
Ай бұрын
Yepp....dude is a one trick pony.
I bought a Glock 26 and it pinches the pinky. Do you know how to improve fix this? A video about how to fix this would be awesome
@Kh2456
Ай бұрын
Yea, ditch your mag pinky extension.
Is the G26 the same dimensions as the G27? I want to get a G27 for concealed carry.
@thegreatzacksbi
Ай бұрын
Yes just different caliber
Get the fns9 and 40 combo standard size
What’s your go-to G26 pocket holster man?
@PoisonSpyder038
Ай бұрын
Vedder pocket locker
I know u luv the Glock 26 but it is just to wide for most people and that is hard for most people to conceal.
to me even the gen 5 Glock isnt ambi
Traded plus cash for a sig 365xl hands down smoked the fn9c in every way.....js
26 or 43x?
New s/w 2.0 better then that Discontinued for a reason
Need to add Stoeger into the battle especially for the price.
@keatonjorgensen8793
Ай бұрын
My neighbor has one that has been back to the factory multiple times and it still won't run right.. And I sure see lots of them for sale on the used market
@jamesw5353
Ай бұрын
@@keatonjorgensen8793 Always outliers just like there are bad Toyotas but overall extremely reliable.
I hate the FN ambidextrous mag release.. They will drop a mag even if you are wearing a proper holster
@nitegoat1369
Ай бұрын
Mine never has.
Why in the Lord do you need thirteen G26’s?
@matthewbeaver5026
Ай бұрын
9 40 357sig. Then those 3 again 3 times for each generation. (Gen3-5) that's 9 throw in a couple Mos and you're there. These are the type of buyers glock wants. Add front serrations and they gotta update. Even though at heart it's the same damn thing it was 35 years ago..
The CZP10S is better than the Glock 26 in my opinion 🤷🏾♂️ Loved the Vid tho 🔥
@mi777ke777
Ай бұрын
I would argue that the 26 is better in the fact that its parts are easily available and if you have to search for things in a apocalypse you'd be able to run a 26 finding pieces of any of the bigger models G17/19/34 and get it running rather than the CZ thats very niche. Don't get me wrong tho I love CZ and the P01 is my full size carry, but the 26 is the most versatile Glock in existence and the perfect back up pistol
@AyeCoby
Ай бұрын
@@mi777ke777 when you look at the cost of the CZ compared to the Glock26 it’s literally half the price. And Using the Apocalypse as an argument is crazy cause that’s never going to happen. My Argument is More Based On Price and Performance.
@HamFlare12345
Ай бұрын
@@mi777ke777 If any apocalypse happens, ruger 10/22 with supressor and subsonic ammo is the way to go.
@eindride1268
Ай бұрын
@@mi777ke777 Best means it's better, having a bunch of shitty aftermarket doesn't make Glock better just because Glock owners have convinced themselves that it's hard to get other gun parts 😂😂
Stop biting those nails bro. Don't forget you're also a hand model.
@XuroX.
Ай бұрын
Most people are here to look at the guns, not the dudes hands.....
@XuroX.
Ай бұрын
Sus
Don't mean to pick here but the whole "battle tested, law enforcement" thing is a bit of a myth. Something like 80% of law enforcement officers in the US never discharge a firearm in the line of duty. If they do, they certainly aren't wild westing their way through the streets firing 1000s of rounds. There are competitive shooters and avid hobbies that shoot many thousands of rounds per year, which is far more than the vast majority of law enforcement officers.
Fns always look cooler than every pistol but I’m going with Glock