You have the most beautiful collection of sharpening stones I have ever seen. I have an Arkansas soft from Pinnacle, and it's all uniform in color. It works great, but I hope you appreciate what you have. Thanks to you I also just received an Arkansas black from Sharpening Supplies that I greatly appreciate. I have sharpened several knives beyond what I ever expected of them. Thanks for the great job you are doing.

Back again, Buddy, for a refresher! Don't know what I'd do without you!

I was just checking out your channel yesterday wondering when you were going to post another video. I was happy to see when I got on KZread that you uploaded. Love watch the videos, hopefully you can keep uploading.

@roughroosterknifesharpenin5531

6 жыл бұрын

Zane Ripley will do!

You sold me soft and black Arkansas wide bench stones from Dan's Whetstones. All the best from Serbia.

@roughroosterknifesharpenin5531

5 жыл бұрын

airpaprika where is Serbia?

Thanks to you, I just bought my first Arkansas stones. I got a Dan’s wide 6x3 soft, and I also bought a NOS vintage Smith’s 6” Soft, full of the dark & gold specks. (It was an old sk-2 kit, the one with the metal oil tin).

@roughroosterknifesharpenin5531

4 жыл бұрын

GhostDiver 👍 nice

Water here as well. Years ago I worked on a place that had a Marbles Arkansas stone. Best one I've ever used. Good man

@roughroosterknifesharpenin5531

6 жыл бұрын

Ezdirect Oh yea them oldies are the best for sure 👍

I`m about to get my first soft Arkansas stone fromDan`s thanks for the recomendation

Welcome back! Prayers going out to your family, hang in there

@roughroosterknifesharpenin5531

6 жыл бұрын

Justin Hendren thanks man. always a good supporter here 👍

Good to see you back mate. I had been hanging out for some more of your videos. I would love to see you do some videos on synthetic stones. Like the norton india stone and their silicon carbide ones.

@roughroosterknifesharpenin5531

6 жыл бұрын

scottecooke ill have to get some first! lol

Thanks for Your advice and sharing your knowledge with Us , I am sorry about Your Loss . I just found Your Site and gladly joined it .

@roughroosterknifesharpenin5531

5 жыл бұрын

No problem. Thats what I'm here for. And yea shes been gone for a bit over a year now. Still bothers me on occasion. Shes greatly missed. Glad you are enjoying the info.

Victorinox uses X55CR14MO, it was me who corrected you. I do enjoy learning about arkansas stones from you even though I do just fine with my belt and a dmt single sided fine diafold. Waiting for your next upload, glad you're back.

@scottecooke

6 жыл бұрын

Do you have a source for that info about the steel type. I am just curious as I couldn't really find a reliable source of info on their steel. Just about everything I read just says it is stainless steel (which as you know doesn't help much lol).

@NicolasShaffer

6 жыл бұрын

scottecooke I got it from a guy on youtube, for the life of me I can't remember his account name, he has also said it. If I remember right I got it from a video on the making of a Victorinox SAK.

@scottecooke

6 жыл бұрын

Ok thanks I will see what that turns up. Sounds like an interesting video either way.

Nice video & explanation on the Arkansas stones. I didn't know much about them before your video. I wondered about your Grandma lately. Sorry to hear she is not doing well. I know you have been at her side from the beginning.

@roughroosterknifesharpenin5531

6 жыл бұрын

Steve Kushman good to know i can pass along some info. and thank you.

Man those are some beautiful stones

Welcome back!

@roughroosterknifesharpenin5531

6 жыл бұрын

potatochip gaming thanks man!

I've just got a Buck vantage pro made with S30 V and these arks put a very shape edge on it. I did go up thur soft to blue/black, so you Sir do know of what you are talking about.

Hang in there buddy! Enjoy the info! Thanks

I wish you make more videos! I learned how to perfect my skills watching this guy's videos! Comment about colors of soft arks. all my new Norton and My vintage Norton soft Arkansas stones are always pure white. At least the ones I've seen. Norton still owns the old original mines! So, yes soft Arkansas stones can sometimes be one color.

I have a Washita coming...I'm so excited!

I love using the Arks and I rarely go to my DMTs any more unless I got some heavy demolition to do. Especially if I'm just doing maintenance. Obviously it takes more time and effort but it's a lot more fun and a heckuva lot more rewarding.

@artheen4713

6 жыл бұрын

Diamond stones are great for removing material quickly. If I want to put a new bevel on something, or need a plane iron sharpened up quickly because I'm in the middle of working on something,that's certainly what I'm going to reach for. But I get more control with a couple of Arkansas stones for the final bevel and edge on a nice knife. When I ease up on the pressure, they remove much less metal, unlike a diamond stone which continues to be aggressive even with light touches.

@roughroosterknifesharpenin5531

6 жыл бұрын

CletusAwreetusAwrightus that is indeed true

First time ever seeing your videos just subscribe and brother i am so sorry to hear about your grandmother ill keep u and your family in my prayers god bless 🙏

@adrianavandyke6359

3 жыл бұрын

Sorry i didnt realize how long ago this video was but ill still be pray for healing i know how bad it is to lost your grandparents ive lost all 4 of my by the age of 30 just keep pushing and we'll be with them agian one day

Can washita replace the soft arkansas sone in a progression with hard and black or translucent?

sorry about grandma and glad you are back

@roughroosterknifesharpenin5531

6 жыл бұрын

steve williams thank.you

I have to agree with you on color in these softs Arkansas

I own Dan's Arkansas stones. And I love them!

@roughroosterknifesharpenin5531

2 жыл бұрын

Good product

I like waterstones personally but I've relented and ordered a soft from dan's. I've got some knives that just do not respond well on the japanese stones so I'm trying an ark to get faster cutting.

@roughroosterknifesharpenin5531

5 жыл бұрын

Billy Bass if your wanting an ark to cut faster it isn’t gonna happen

Since Ark are measured by density, would weighing stones of the same size provide an educated guess as to which stone is smoother. Thanks, Lon

@roughroosterknifesharpenin5531

5 жыл бұрын

Lon Porter I’ve wondered that myself. I’d imagine that they would have to be quite close in size. Using them a lot will tell you the most. In my opinion.

The soft is confusing me please help me understand!!! I have a small pocket stone that came with a survival knife sheath and it's really soft I mean it turns to powder after just a 6 or 7 strokes it's not coarse or that soft I can dent it with my finger nail or as bad as chalk but feel like if I use it like a normal stone imm pushing the edge through the sandy slurry and futile to use it. Does it s like your soft stone or have you got a tip on using it?? Also if I Was to soak it in superglue or epoxy would it maybe make it harder and stable or would that be bad to use it with any of my blades?

@roughroosterknifesharpenin5531

4 жыл бұрын

*Alex* V-i-P don’t soak it in glue bad idea. First of all them small stones that come in the “survival “ knives aren’t worth having. I’d recommend replacement. It shouldn’t be doing what you are saying

Great video! I haven't tried Arkansas stones yet. I like the idea of using natural stones for sharpening. How often do you have to flatten them?

@artheen4713

6 жыл бұрын

How often you need to flatten them obviously depends on how much you use them. I guess I use each of my stones for around half an hour a week, and can generally go six months without flattening the soft ones. More if you're not very picky. And you don't need an expensive flattening stone either. As long as you have three stones you can use them to flatten each other, even if different hardness. A couple of minutes for each combination, repeated a couple of times, and they should all be nice and flat. Or use a wet-and-dry sandpaper on a glass plate - that's as flat as you'll ever going to need.

@blueline5614

6 жыл бұрын

Art Heen I use sandpaper on a piece of granite to flatten my waterstones.

@roughroosterknifesharpenin5531

6 жыл бұрын

blueline561 bery rarely do i flatten mine. my dmts are my main workhorse

I had a hard Arkansas stone, grinding wheel dresser. In 5yrs had barely softened the corners. Then it was stolen. Anybody know where I can find a replacement?

I want to buy very high grit stone from USA. But I vary between Black Arkansas and Spyderco ultra fine. What will You choose?

@roughroosterknifesharpenin5531

6 жыл бұрын

Bartosz Sochaj i have both and use both. i would recommend getting both. But... the black Arkansas is so much finer than the uf ceramic. i would recommend getting a black Arkansas from Dans Whetstone's. and lap it a bit. i assure you that you will be happy with it.

Sorry to hear about your Grandma (thoughts and prayers). It's great to hear someone sticking up for Arkansas stones. I've read for years that they are pasé, by people who didn't use them. But they worked great for my grandpa - he was a cow-hand on the prairies in the 1920s (yeah, I'm that old), and he used them on his 1095 knives. If I weren't already inve$ted in water stones and diamond stones, I would seriously consider getting a soft Arkansas. Question 1: For a finishing stone after my DMT's, how about going from DMT Fine to a Spyderco Ceramic Medium or Fine? Or should I go to waterstones? I have lots of grits, and I'd like to get a little less toothy edge. Question 2: If waterstones, would you recommend the same sweeping motion that you use on the DMT's? I don't think I want to use the usual quick push-pull motion that a lot of waterstone guys use. At least not on a knife where I am trying to be super careful about the bevel precision.... Or do you really, really recommend an Arkansas as a finisher? I'm really trying to study your method seriously. It's starting to come together a bit. So I'll totally take your advice.

@roughroosterknifesharpenin5531

6 жыл бұрын

Greg Goode most of my sharpening for a toothy edge I use a dmt 220 xc if edge damage is present. Dmt coarse 320c to straighten up the bevel a dmt 600 f then a dmt ef 1200 grit. I also sometimes go to a spyderco uf stone then a black sometimes a translucent before that. Then strop. I dont use waterstones much

@greggoode3450

6 жыл бұрын

Lol, you've got me almost about to call Dan's! If you strop after the black Arkansas, what compound? OK, serious newbie question: can you or someone recommend a particular Dan's Arkansas to use after the progression you mentioned? You know, coming off the DMT EF 1200? I have a Spyderco UF too, didn't know that there's good stuff after that!

@roughroosterknifesharpenin5531

6 жыл бұрын

Greg Goode oh man just depends. I use so many compounds its unreal. And if u do tell em rooster sent u. Of it was me id get the hard black soft combo.

@greggoode3450

6 жыл бұрын

Let me call them and see what they say..... Oops, closed today. Will try Monday. Anyway, my skill is not up there yet anyway. I'm working with burrs and apexes on the XC and C right now.

@greggoode3450

6 жыл бұрын

Rooster, on Dan's site it's listed as item # MBC-1021-C (I want the 10"). Is that the combo you meant?

hi rooster. i bought the dan’s combination just like you have there on the left. it was used and dished (although said new). i tried everything to flatten it and ended up using a poor quality dmt extra fine to get it flat. if i flatten all my different stones with the same dmt plate, will i end up with different hardness stones with the same scratch patterns? i have a 10X watch makers loupe but my eye is still very untrained. thanks man. great videos

@roughroosterknifesharpenin5531

6 жыл бұрын

joeyripswell u bought a stone from Dan and it was used?

@joeyripswell

6 жыл бұрын

Rough Rooster Knife Sharpening- no no from amazon. Cant remember the seller. Not from dan!

...good too see you back ! ...Sorry too hear about your Grandmother...interesting, moving from the DMT to a softer Ark., on some steels...have you looked at the Fallkniven CC4 ? have a great week, c'ya

@roughroosterknifesharpenin5531

6 жыл бұрын

JCB 67 i have not

cool

You mention oil gumming gthese up. What would you suggest instead?

@roughroosterknifesharpenin5531

6 жыл бұрын

Heirphoto I use dawn and water thats all

I like soft Arkansas stones for my smaller grade steels ( 440c 8cr13mov etc.)

@roughroosterknifesharpenin5531

6 жыл бұрын

Jared Tyra exactly!

They sell Smith's soft Arkansas stones in Lowes I love them.

@roughroosterknifesharpenin5531

5 жыл бұрын

Julius Torres I hate to tell you. But them are very very low quality

I bought the the black & the translucent, used a profilometer to measure surface finish roughness. The difference between the two are negligible, a mere 15 Ra in. The Translucent was the lower number meaning slightly smoother surface finish!

@roughroosterknifesharpenin5531

5 жыл бұрын

Lon Porter the finish that was left on the stone after the lap makes no difference of the actual grit. I can take a cheap soft Arkansas and make it so smooth you could glide a plain blade across it with 1 touch. Or I can get a black ark and lap it down to 100 grit. What was the point of the test?

@lpquick1

5 жыл бұрын

Seriously what was the point! Trying to determine which stone a translucent or hard black was finer grit. If i didn’t check after lapping but later after a sharpening or two would the readings be worth anything? Thanks..

@roughroosterknifesharpenin5531

5 жыл бұрын

Lon Porter the readings aren’t worth anything to begin with. You cannot determine the grit of the Arkansas by the surface grit. Arkansas are identifiable by specific gravity. Weigh them both and that will tell you. Thanks..

@lpquick1

5 жыл бұрын

Ok surface grit means nada, only the density of the stone determines the cut. Can you tell the difference between a hard black and a translucent after polishing?

@roughroosterknifesharpenin5531

5 жыл бұрын

Lon Porter you literally just Repeated what I just said. Lol And yes I can with multiple stones in fact. I think you should learn a bit more on this subject before you attempt to test my knowledge and one up me.

If you only can get (or bring) one stone, a soft Arkansas or a true Washita is the way to go. Unlike most other "oil" stones, you can get Arkansas stones to work like finer grade stones just by easing up on the pressure. As long as the stone is nice and flat, you can go all the way to very sharp on a soft Arkansas alone, just by going lighter and lighter. Belgian coticule works much the same way, with fine crystal ridges doing most of the honing and not just particles like in Indian stones, Japanese water stones and man-made stones. But it takes a little technique, and sometimes the stone works better one way than the other for the light touches.

@SuperChickenman2

6 жыл бұрын

I've used both natural Arkansas and waterstone and I love Arkansas. In my opinion once I finish with my translufent my edges couldnt be any finer with a higher grited waterstone : i have abiut 7 dans whetstones and the quality is fantatic

I have an Arkansas stone sold by Case and on the website they call it a washita but on the product it says it's a soft. I'm not experienced enough to know which it is in use but perhaps you know? I'm guessing it's a soft because it was only 16 dollars

@roughroosterknifesharpenin5531

3 жыл бұрын

I'd say it's a soft

@tonydemaria186

3 жыл бұрын

@@roughroosterknifesharpenin5531 Alright thank you and thanks also for the quick reply! Are you gonna be making a video on washita stones? I've heard you talk about them a lot in your videos and I'm really interested in them but I can't seem to find one on washitas like you have for the other Arkansas grades

Tbf soap does remove oil so it could technically mix

@roughroosterknifesharpenin5531

Жыл бұрын

No completely incorrect. You know kind of like the old saying goes together like oil and water it don't mix. This is pure common sense oil and water do not mix.. you can argue that with me to the very end and I will not agree with that oil and water do not mix no matter how you look at it no matter what you say it don't work

Can you tell me about how much and when you apply pressure? Thanks bud!!

@roughroosterknifesharpenin5531

4 жыл бұрын

That's something I can't tell u how to do. It comes with experience. Sometimes you need more pressure for more metal removal. And when you hone like on a black Arkansas you don't use much at all. Practice practice practice. It'll come to you I. Promise. 👍

@mklein5179

4 жыл бұрын

Rough Rooster Knife Sharpening gotcha! I just got a shaping glass 6000! Black ark is next. Thanks rr!

@roughroosterknifesharpenin5531

4 жыл бұрын

Telling u right now. Send that thing back before you use it. Them things are junk. Take a look at my shapton video.

@mklein5179

4 жыл бұрын

Rough Rooster Knife Sharpening shit to late.

@roughroosterknifesharpenin5531

4 жыл бұрын

@@mklein5179 as highly recommend as them things come, I was really expecting a crazy edge. Not the case. I've gotten better edges off a soft Arkansas than I did shaptons 8k

Cliff Stamp put a video out using a soft ark to cut a micro bevel in k390 steel 64 Rockwell!!! It damn sure cut a micro bevel!!

@roughroosterknifesharpenin5531

6 жыл бұрын

Michael Shults absolutely

Thanks for the talk on soft Arks. i never could see the sense in that oil+water recipe. The soap kills the oil, the oil consumes the soap.

@roughroosterknifesharpenin5531

2 жыл бұрын

Umm, what do you mean?

@adamwhiteson6866

2 жыл бұрын

@@roughroosterknifesharpenin5531 That the two components degrade each other so why combine them?

@roughroosterknifesharpenin5531

2 жыл бұрын

@@adamwhiteson6866 no they do not. Oil and water don't mix. I think you missed the whole point here. You don't use oil and dawn and water on the same stone.

@adamwhiteson6866

2 жыл бұрын

@@roughroosterknifesharpenin5531was talking about oil and soap.

@roughroosterknifesharpenin5531

2 жыл бұрын

@@adamwhiteson6866 mixing oil and soap to use as a sharpening fluid?

What kinda stone is a washita stone???

@roughroosterknifesharpenin5531

6 жыл бұрын

Scott Tindol its a coarse Arkansas

Victorinox use mostly the x50-x55 steel

@roughroosterknifesharpenin5531

2 жыл бұрын

I couldn't remember what it was to save my life. Thanks

Sorry to hear about your Grandma.

@roughroosterknifesharpenin5531

6 жыл бұрын

El Duderino thanks man

Out of my soft/hard Arkansas stones, the Smiths are in a class of their own. They are by far the hardest/finest by a good margin (although my only Norton is a translucent; so I have no Norton soft in my collection), and they both have a hint of that orange/rust color, throughout. One is a "hard," one is a "soft," and they are more alike than different. Both are harder than any other ark stone I have (barring the true hard/translucent). My Lansky stones are the opposite. I have a hard and a soft lansky, and they are both softer than any other Arkansas stone I have. My Dan's stone is somewhere in the middle. The generic stones I have are all somewhere between a Dans and a Lansky, but typically more like the Lansky. I don't really have a favorite. They all work great. The softer ones cut a little faster and rougher, and they wear significantly faster. The harder ones are slightly finer, but they cut slower. They all cut fast enough and leave an edge fine enough for general sharpening with little need for anything finer unless for daily shaving nor anything coarser barring chips or tools with large flat bevels.

@roughroosterknifesharpenin5531

6 жыл бұрын

Mildy Productive arks are definitely different. The stones that have that lil bit of orange in them are nice stones. Just gotta find what works best with what steel

@mildyproductive9726

6 жыл бұрын

What steel, true. What kind of bevel is possibly even more important. What I find is that the harder the stone, like these Smiths, the smaller an area of steel you can sharpen on the stone before the blade just skates over the stone and the stone glazes over. So a knife that has a wider edge bevel will have the same effect as a knife with a harder steel. The straighter the blade is, the more the effect is. So a plane blade or large chisel is perhaps the most challenging blade to sharpen on a really flat ark stone. I have to put a pretty decent crown and edge bevel on the Smiths to get them to cut well. First one I owned, I thought it was junk for about 10 years, before figuring this out. When it was dead flat, it was just a (bad) finishing stone; with the crowned surface, it sharpens anything. The translucents, OTOH, I have had stones from 5 different sources. The initial surface finish aside, I couldn't tell any difference between any of them. The Dan's came with a super glossy smooth finish. The Norton came with a super rough machined finish. Underneath the finish, they are all the same to me. Norton, Dan's, Best, Smith, generic translucents - they are all super fine. And like all hard stones, they work better with a bit of curve to the surface, unless you like making and having to remove large tin foil-like burs. This is why I think David W can only sharpen a chisel maybe 4 times on one of his almost flat ark stones before he needs to take the chisel back to the bench grinder to hollow out the bevel again, and he has to periodically roughen/resurface his stones. If you maintain a slight bit of crown, you can sharpen a 3/4" chisel on just an ark stone, and it will continue to cut the full bevel of the chisel. It will never need to be resurfaced to regain bite; if you are maintaining it with the right surface shape, the surface will wear at the right rate to keep itself renewed. If you are trying to keep the stone very flat and you try to bite off more than it can chew, putting a straight blade with a giant bevel on it, you just dull the stone.

95% of my tools are antique so they work really good on Arkansas stones.

@roughroosterknifesharpenin5531

2 жыл бұрын

What's antique have to do with the stones?

Man I have an old Smith soft it came in a wood box 6 inch stone and I swear to you I can run my knife across that thing 5 or 6 passes and its ready

@roughroosterknifesharpenin5531

4 жыл бұрын

Them old Smith's stones are great

Kerosene bro, kerosene. And god bless your grandma. Great point in soapy water though

I’m going to be getting me a 12 x 3 x 1 soft Arkansas in the near future I’m going to have to talk to her and see if they can find something unusual for me I don’t mind paying extra I will make sure to mention your name

@oldschoolprepper2273

5 жыл бұрын

Just wanted to give you an update I ordered it I mentioned your name they remember you very well I asked for something special with some character

@roughroosterknifesharpenin5531

5 жыл бұрын

@@oldschoolprepper2273 awesome man. Thank you. And what did that cost you?

@oldschoolprepper2273

5 жыл бұрын

Rough Rooster Knife Sharpening it was 126 with the discount I think it ended up being 113 she said she would write on that purchase order find something with character

@roughroosterknifesharpenin5531

5 жыл бұрын

@@oldschoolprepper2273 discount?

@oldschoolprepper2273

5 жыл бұрын

Rough Rooster Knife Sharpening I phoned in my order I’m not sure why she gave me a discount I just said thank you 😊

Hahahahahhaha S30V won't work on an Arkansas hahahhahahahaa!!!! I would love to show them my carry blade it's a 808 Benchmade in S30V and it will treetop hairs. I have sharpened ZDP189,M4,S90V and D2 to insanity sharp!! I am talking sharp enough to cut the fabric of space-time!! Arkansas stones don't cut fast, but with some patience they will yield the best edges known to man. I have a huge collection of Arkansas stones like you do and I swear by them!! I start with my Pike Lilly White, and move to a medium Arkansas, then on to a hard black then I use my blue black translucent as a finisher, and strop with DMT compound and the edges will give you a nose bleed lol.

@roughroosterknifesharpenin5531

6 жыл бұрын

Chaparral Watch Restoration oh I assure you I can finish any steel available on my Arkansas. They do produce fantastic edges. People just don't wanna believe it

@hillbillyheadbanger367

6 жыл бұрын

Rough Rooster Knife Sharpening I think most folks just want to be a special snowflake, and do things differently than the proven ways of the past. Heck I ain't found a better rock than a Arkansas for putting a screaming edge on. I think folks just either got lazy and want things without any effort or just want to do things a new modern way. I guarantee our Arkansas stones will give an edge that will crush anything out there. I know because I have tried it lol. I use DMT plates, but that's it other than Arkansas stones.

@hillbillyheadbanger367

6 жыл бұрын

Rough Rooster Knife Sharpening I wasn't doubting what you can do at all buddy!!! I imagine you can make a STUPID LEVEL of sharp anyone that puts forth a real effort to master freehand can reach insanity sharp. Heck I wouldn't be surprised if you made me look like a moron doing this lol. Folks like you and me that have been doing this for YEARS can beat edges put on by an Edge Pro Apex or a Wicked Edge 99.9% of the time. One of my friends has an Edge PRI and keeps asking me to sharpen his knife lol. To me that's a compliment, and I always do it because I love doing it. It's fun and very relaxing for me to drag some steel over a rock. It's almost meditation to me.

Butt paste, LOL

On the s30v part I think they ment it will affect edge durability or retention without using dimonds since it can't cut the carbides from your experience isn't the case.

@roughroosterknifesharpenin5531

Жыл бұрын

That isn't true.

@tompossessed1729

Жыл бұрын

​@@roughroosterknifesharpenin5531 I misspoke, I meant a soft arkansas can cut the carbide of s30v and your experience with them proved it.