Update/Revision: You CAN bypass the separate cooking system and ignore sucking ore into it's own box. This will allow you to immediately pump any cooked ore back into the system and sort as with any other items by running your furnace directly into your drop box combiner. The drawback to doing so is your drop box will always be filled with ore while cooking and this may require you to have more drop boxes. I would still do things as I've shown in this video as I would prefer to separate out any uncooked ore and save me drop box space (I tend to come home with full inventories)

Nice guide, but you might add: - Increased speed out of the dropbox by linking two storage modules *on the same box* - Electrical splitters don't need to use only port 1 & 3. They automatically balance on whichever outputs are used. - You can keep everything sorted by having another conveyor excluding the items you put into a box, pumping other items back into the start of the system. That way your messy teammate can't give you a reason to throw a spear at him.

@yourdadow446

22 сағат бұрын

Can you set it to exclude all items or do you have to set each item your self

Hands down the best thing facepunch added to rust. A system to let us spend more time doing what we WANT to do, instead of sitting in a base, organizing boxes, managing furnaces. Great video!

@Reksmore

Жыл бұрын

Honestly as a solo it's a game changer! I can be soo much more productive and it's amazing

@travv88

Жыл бұрын

but i hate going outside in rust, it's scary 👀👀

@travv88

Жыл бұрын

but for real the automation is good as fuck. ive only done it in one wipe but it felt so good. i made a drop box and an auto smelter

@statitica5662

Жыл бұрын

@@Reksmore It's like having an extra player in your team

@statitica5662

Жыл бұрын

@@travv88 I usually make a simple smelting system as soon as I can, and immediately progress speeds up while the base cooks for me and I just keep it fed. Once the base is fleshed out, I redo the whole lot in one go. Just be aware that building and upgrading can disconnect pipes (especially the vanilla sheet metal model), and it always seems to disconnect the pipe going to the furnace against the back wall...

I would recommend putting the conveyors on the wall above/next to their respective boxes. Makes for a cleaner install and also if you want to change what boxes contain it's easier to tell which conveyor goes to which box.

Been doing this for a while. Being able to come into your base and put ALL mats, comps and ore into one box and it gets whisked away is awesome.

@Reksmore

Жыл бұрын

It's a game changer for sure

SHIFT + LEFT CLICK?!?!?!? 2000 hours in Rust and I never knew I could do this?! I've just been color coding my pipes!

@Reksmore

Жыл бұрын

it makes life a lot easier and helps find out where they go without wondering. Clear paths

@realAlpha

Жыл бұрын

its only left click you dont need to hold shit ^^

@flacoloco4046

8 ай бұрын

​@@realAlphawas just about to say this

@mellowman8695

7 ай бұрын

Looks like others have already pointed out only left click

@michaelboots7690

3 ай бұрын

5k here lol

I'm always the base organizer whenever I play rust with my mates. This system makes my work much easier, thanks! Also, really good and easy to follow video :)

@Reksmore

Жыл бұрын

Thanks for your comment! Glad I could help 🥰

@richardcagle5475

6 ай бұрын

Yeah, I'm a base rat in a group myself. Just came back an last I played this wasn't in the game. Makes my rat role a bit less important, but I'll take the convenience over clout any day

@ohdaesu9395

5 ай бұрын

I was the base organizer, and after this I got fired :( I then became a chad, and been raiding their base everytime, since they already sort everything for me xD

This is hands down best automation video i have seen! Great work keep it up!

@Reksmore

Жыл бұрын

Glad you found it helpful 🥰

An extra tip: You can connect a second wall of conveyors, one for each going in, with an inverted filter (copy and paste and select to exclude) all going into combiners and into the dropbox. Set the filter fail of each original conveyor to the power input for each respective one, and now you have your loot automatically moving back to your dropbox if put in the wrong place and back into autosorting system for only the frag cost of combiners and conveyors. It does have the slight downside of the box not sending items out of its full and has possible items to bring in, but unless you are overwhelming the system with items it should'nt happen, and even then its just a slight limitation of saving half the power, not a downside of adding them. Props to @x-tremespeed for this one, goat.

I really love the automation of my whole base and even I could learn something from this video. Like putting the ore in a box before it gets sucked into the furnace to get the dropbox nice and empty. What I personally do differently (aside from a way nicer piping xD) is that I highlight my pipes in different colors so that I always know which pipes are going in which loot room. That makes it easier for me if I need to reconnect something or boxes get destroyed etc. I do the same with my electrical. It´s not much more time you need to invest but it makes everything cleaner and nicer imo. Keep on Reks. Love your content.

@Reksmore

Жыл бұрын

Keeping room in that drop box is helpful for sure! Always happy to help and thanks for your support

By far the most helpful box sorting explanation and tutorial I have seen since it’s came out. Thank you. I’ve basically just ignored sorting bc it seemed too complicated. Keep it up

@Reksmore

Жыл бұрын

I tried to make it as simple as possible cuz it's a huge asset when used! Thanks for your comment 😊

This is the first time I have used automation in a base and you have made it a breeze to do! thanks for the time you invested in the video. It has helped me out a ton!

@Reksmore

Жыл бұрын

Happy to hear it helped! I knew this wouldn't be a super popular vid but I wanted to make industrial more approachable and have something to send people to for help

Best industrial video out there man. Made it super simple and easy for people who would have never tried to do this stuff

Brilliant video. I had some of this down already but you've shown better ways to do it! Thank you :)

@Reksmore

Жыл бұрын

Glad it helped! I've been playing with it for a while now and this is what works best for me

Hey Reksmore, just wanted to let you know your build videos have helped me out alot. I've started using build techniques I've seen in your videos, and I've been making variations on many of your smaller base designs. Keep up the good work.

@Reksmore

Жыл бұрын

Appreciate your comment! I love knowing I'm actually helping people 😌 ☺️

Such a good and easy video to watch and follow!! I had NEVER tried anything like this before and would still consider myself a rust noob. However, my base is now sorting and smelting away and I am very VERY happy! Thank you for a nice clean, easy, tutorial that isn't overly complicated or overwhelming.

They did recently add a seasons system to Rust, where the sun changes positions throughout the wipe cycle, which could easily be its own video topic if you chose to dig into that. Some people have made documentations on Rust’s seasons, however I haven’t come across any videos explaining it in layman’s terms. Anyway, thanks for the automation guide, cheers

@quint7627

10 ай бұрын

Can u link those documents? Cant find anything about seasons in rust, Bud its there for Sure.

@Reksmore

10 ай бұрын

You can't really see anything about it without running your own server, but the day and year do change in rust over time. Sesh isn't wrong and the sun can change position based on how far into a wipe it is

@bhartley1024

2 ай бұрын

Seasons have been a thing in Rust for a long time, at least since 2020 when I started playing. They just weren't as noticeable because solar panels were using the wrong vector to the sun. The Rust island is 10 degrees south, 25 degrees west Rust servers start with the date being May 20, 2024 by default. Before around Oct 10th you'll generally want panels facing somewhere in the north, after that, they should face south. That's a difference of 143 days and since 1 real time hour is 1 day in-game, that means the changeover happens 143 hours after wipe, around 6 days. 6 months in-game is around 7.6 IRL days. So If you play a monthly wipe, you'd want to flip your panels every week. If you can afford it, just place two panels. I think generally East/West works better than North/South, but I'd need to do more testing to know for sure which one is better on average.

nice stuff. I thought I knew most of the industrial related info but definitely found several useful bits of information here. well worth the watch. thanks.

@Reksmore

10 ай бұрын

Glad it was helpful!

i hope sometime soon they incorparate the drone into this system. So you could do something like transfer ore from your farm base to your main base on the other side of the map.

Amazing guide, super easy to follow and copy. Thank you

Earned a new sub... Best sort storage automation

Great video!

Video is really easy to follow and really helpful im lost when I have to do anything industrial. Also had some good fun playing bedwars wit you.

@Reksmore

Жыл бұрын

Hopefully you can have fully automated sorting now!

I Needed This!!

@Reksmore

Жыл бұрын

Happy to help

thanks this helped me along the way :D now im a master.

Amazing vid btw

Dude I am saving this video 🤙

Good vid. I would add something though. It doesn't make it more complicated, and could save someone's sanity. 1 memory cell, one more conveyor, and a small box. Put the memory cell just before the splitters. Put the conveyor above the furnaces and have it set to pull the cooked ore into the small box. Have the small box output go to your industrial splitter to be sorted to their boxes. Why do this? Because no one wants to hear those furnaces going nonstop. It will drive you crazy. Now, when you put ore in the drop box, it will pull into the furnaces on automatically, then when all of it is cooked, they automatically turn off. It of course can get much more complicated from there.

@flacoloco4046

8 ай бұрын

Oh I like this. I usually hook up my system to buttons (on and off) and just leave them on ALL the time, but ur right it is annoyingly loud so I put the furnaces behind a closed door.

thx, that help me alot.

@Reksmore

Жыл бұрын

Happy to help

Genius! no joke!

Good stuff

@Reksmore

Жыл бұрын

Glad you enjoyed

Best vid Ever!!!

ufff lovely ty!

What if you have multiple drop boxes in your base - like having some in your compound and some on your roof? What would be the easiest way to get all the boxes to filter into the correct boxes in your open core/loot room?

@Reksmore

Жыл бұрын

You would just run all the drop boxes into the drop box combiners

Great VID I have a question tho, any items that arent sorted from the drop box can I send them all into a box?

W video mate

You should connect all your outputs to the drop box and let the system sort it. The problem of your system is that if you put metal frags in the drop box, they will not get sorted

its always wiser to use the extra solar panel branch on the inside combiner to connect to a generator, incase you have other things like smart autoturrets and door controllers and your being raided or just some hack got on your roof and destroyed the solar panels.

Lol I struggled to setup auto smelt just by sheer stubbornness 😂 with this I'll have auto sort next wipe 😂

I’m on a server where large and small furnaces (when using automated industrial components) only fill ores into the first slot until it full or until a different item needs to be smelted, rather than evenly spreading the ore across all the slots to reach max efficiency. Is this intended? Is this normal for all servers? Is there a way to instead fill each slot evenly rather than the first one when using automation?

this is exactly what I wanted to know, but was too lazy to figure out myself :)

@Reksmore

Жыл бұрын

Happy to help!

Hey rek i recently met you on a server dont know if you remeber me but I was calcium was a fun time!

"and it's that simple" me scratching my head.

Hey! I've recently just started messing with the industrial update. What's the reasoning for sending the cooked frags/sulfor straight to the intended boxes instead of feeding it back to the start of the loop? Won't you need another conveyor and combiner for each box to deal with any cooked materials from other sources than smelting with this system?

@dylandresch2578

Жыл бұрын

you can put more than one storage adaptor on a box

THIS IS THE BIBLE....Just used this system in my base....THANK YOU THANK YOU THANK YOU!!!!

@Reksmore

11 ай бұрын

It's a game changer right?!

@soiledbear2051

11 ай бұрын

@@Reksmore ....Absolutely....I'm showing others and spreading ur gospel on my server!

Great tutorial Reks! Is it possible to take from the cooked Ore and then move it into the TC?

@Reksmore

Жыл бұрын

100%, the easiest way imo, directly connect the output of the ore into the tc w/ a conveyor and this would allow you to also set the limitations on how much (ie you could tell it to always only hold 4k metal in tc and keep the rest in the box), I would keep in mind that a combiner before going into the tc is probably best to allow you to also send from other sources

Why not go from furnace to the first combiner? Then conveyer to box, that way when you raid and get smelted ores they go in the drop box as well?

@Reksmore

Жыл бұрын

Furnace to combiner will try to pull the uncooked ore out. If you add a filter before going back into combiner it breaks the system

You don't need a conveyor for furnaces to output into a box. You only need conveyors if you want to sort the output.

Yay now I can loose my kits a lot faster

@Reksmore

Жыл бұрын

LMAO

Does it still work if u put metal frag, high qua metal, and sulfur in the drop box?

The only downside here is that you’re consuming a fair bit of a power, so at night it could drain the battery a fair bit. Is it possible to only have the furnaces turn on when there is ore to cook? If so, this would be a great 2nd part to this video, cheers!

Definitely should use this setup in molded server: DOMINION 2X PVE !

How do I get the storage organizational spray that he has? I'm new to rust?

Is it possible to have drop boxes outside or on the roof, go into drop boxes in the base, then those drop boxes go into organized boxes? How would I do that if so?

Why do you add a root combiner for your solar panels when you could just connect to the electrical pass through?

Are two converyers filtering the same item faster or does this even work?

Do you know how to seperate cctv camera and targeting computers from the resource catagory in the conveyors?

Quick question wdym by dont use the 2nd output on a spittler in 15:30

The one question I have is where can I find that kind of box skins that you have?

Can you get these neon signs for Consol edition

How do i get the skins for the boxes and glowing doors?

How's the name of those boxes with specific names of what goes into there? Like you have guns, ammo, comps etc

Could you also make the furnace output go back to the drop box to be sorted?

@Reksmore

Жыл бұрын

Yup Tbh I thought you couldn't cuz it'd suck the raw mats too. But it doesn't.

1:28 you forgot to put the timestamp (i know its in timeline but just in case you forgot)

Where do i see how much power each thing requires (ex. conveyors need 1, electric furnaces need 3)

its so easy, til the pipes all disconnect...AGAIN! great stuff and not your fault that FP can't seem to make this stable

@Reksmore

Жыл бұрын

In my playing as long as all your upgrading is done you won't have issues. Only seems to be new building or upgrading that ruins it

I automated a base once, and guys said it looks ugly so builder just removed all pipes 😢

@Reksmore

Жыл бұрын

The secret is to remove all your doors then do piping. You can hide the pipe under the door pieces along the roof by doing this

@FishingwithRomanas

Жыл бұрын

@@Reksmore it was on 2x quad server, there was a very big compund and we had way too many boxes and so. But almost everything was automated, and there was no way to hide all them pipes whatever you do. Currently I mostly do automated charcoal factory. Sending 10 wood per go and no max on return. It burns forever 😂

@Reksmore

Жыл бұрын

I hook up 2 or 3 furnaces and have them pull from my wood box and into my charcoal box. Trade stone for wood at outpost and I'm set for charcoal

@FishingwithRomanas

Жыл бұрын

@@Reksmore unless you get hands on wood tea and a chainsaw 😂

What is the name of the skin package in your boxes?

off topic but what sandbox server are you using?

Where do you get these names boxes?

Question: Why use second splitter for the furnaces? Since you only use 4 furnaces, you could save 1 splitter by putting three furnaces on the first splitter and then sending the branch out from the leftover branch to the 4th furnace. That 2nd splitter is just wasted in this design.

@Reksmore

Жыл бұрын

Ah, you're correct yes it would save you the 1 power use to just go directly to the last furnace instead of using the 2nd splitter. I've just never done it that way as I like to make things as easy as possible to expand without re-wiring. This set up gives me the option to very easily add 2 furnaces anytime I need to (Which has happened)

What are people doing for charcoal now? Is there a way to create it through an automated system as well?

@bhartley1024

2 ай бұрын

I don't use the electric ones for that very reason. I automate the small furnaces because even though you need more of them than you would using large furnaces, they take up less space for the same smelting rate. If I have more charcoal than I need and I'm short on wood, then the electric ones would be useful. You can also automate oil refineries and just run them empty to make charcoal, since they take 1.5s to burn 1 wood and the other furnaces take 2s.

Ughhhh I didn’t realize u could just directly connect the electric furnaces together with pipes, before I’d use a splitter to split the pipes into each furnace then back out the furnaces and into a combiner and then to the out box…. I also for some reason didn’t think to use the pass through on the conveyors… i feel a lil goofy…

@Reksmore

Жыл бұрын

And this is exactly why I made this video 🥰

finnaly i can organize my worms

Do they have this for console

you are welcome for watching

+1. Never put any electrical component where someone can destroy those, like roof , specially the combiners, bc pretty easy to destroy them. At least was some time before, idk if they change that. And its RUST. Some naked will do the work .

20:22 Where is the smelted sulfur ( going to ) ? xD

Separating the cooked ore as a different system is a pain if you drop cook sulfer and metal frags to the drop box as well so I like to make everything go back to drop boxes.

@Reksmore

Жыл бұрын

This actually has complications. You see if you put it back into the loop it'll actually pull all the currently cooking ore aswell. And unfortunately you cannot place a filter before going into the loop or the sorting items after won't pull

@wesleyjongbloed

Жыл бұрын

@@Reksmore But you could connect the furnaces' output back into the system, right? Then it should work. Thanks for the great vid.

@Reksmore

Жыл бұрын

Unfortunately not. As you can't put a conveyor to filter first it would try to pull out anything inside the furnace including uncooked resources

@Reksmore

Жыл бұрын

@@wesleyjongbloed I stand corrected. I just tested. For some reason I just assumed as much. It does indeed keep the uncooked ore in and only suck out the cooked stuff. You 100% can bypass the separate system for cooking. This would result in your drop box being full of ore until you're done cooking, but this can be fixed with multiple drop boxes

@TheKrammerees

11 ай бұрын

Can't you just use a combiner before the sulfur/frags box. One conveyer into it from drop box splitter filtered cooked sulfur/frags, and another on the output of furnaces splitter filtered correspondingly? Or am I in the wrong here?

eyo! lets go!

Well, I guess it's been a while. This is totally new shit to me

Is this possible on console?

this is a great video. its too bad that the pipes cant pass through walls like wires can.

@Reksmore

10 ай бұрын

I agree would be nice!

I get its probably well worth it but i get a weird satisfaction from doing it myself 😂

Would all this fancy trickery work with skulls too?

@Reksmore

Жыл бұрын

It should but I've not tested

@darthbader6506

Жыл бұрын

@@Reksmore I hope the Skull God doesn't read that!

Cool.. still never doing it and sitting out the front of your base for three hours with a waterpipe instead

And also tell raiders where your boxes are by following the pipes.

Great video, but rather frustrating at the end how you just glanced over connecting all the electricity.

After all this work, if my base gets raided I'm gonna be pissed!

How to add color names on your chest

@13:15 God dammit...I wish I'd known about this sooner. That would've made things less complicated.

Ayo

Next stop: Find a way to put a clans worth of sorting/cooking into into the smallest space possible. Smallest, so it can be hidden and the guy that always has to build it doesn't scream when it gets hit by a rocket every day.

Automatic sorting is very OP, people don't use it because they're lazy af.

@Reksmore

Жыл бұрын

But it helps you be lazy long term!!!

@baska-

Жыл бұрын

@@Reksmore that's exactly right, king

Good videos but MONOTONOUS!!!!! Vary your tone man

I'm guessing this hasn't made it to crust yet ?

7:45 "THE SIMPLE Guide to Fully Automated Storage in Rust" - SURE! "Simple" ye

holy tthis is the easiest and understandable guide for this ive ever seen.

it just said 38 seconds ago?

@Reksmore

Жыл бұрын

fast as heck

Redstone made easy belike 🤣