I will try to do it with Woodprix plans.

@JAkedAgain

Жыл бұрын

I hope it went well

Your back and forth technique with the roller is causing you to cut the screen. A firm, slow steady roll is more ideal and will also cause the spline to stretch forward; do not pull pn the spline.

@michaelc.palermo2862

5 жыл бұрын

You can definetely stretch the spline to help with the roll. His problem was his technique he was trash. Had no idea what he was doing. Im a pro screener myself and this was painful to watch. Your suppose to pull the screen with the spline taunt then hit your good firm roll. Then repeat. Also using the metal roller didnt help with being that inexperienced. Hes as good as any random guy on there first day and there first screen

@nadastankovic5245

4 жыл бұрын

Michael C. Palermo he is not a pro like you. If it’s painful why watch it. He never claimed he was a professional. It’s for people who have no idea to repair a screen. Maybe people who know this business and claim they are pro than make a video and teach us. I hate when someone does not have class to comment gracefully with some tact. When you make a video if you do how would you like people commenting like you. Be kind man!!

@aurelienyonrac

Жыл бұрын

You guys s comment are exelents. For that i am greatfull that this vido exist

The spline gets cut after it is rolled in, metal corners are way better. You don’t leave loose screen in the middle, a “pro” can get the right tension on the mesh. Push harder with the roller and lean on other hand while pulling the mesh towards you to get this tension. I have been around professional screen makers for over 20 years and you are no pro. You are worse that somebody who has been trained properly for 1 day.

@michaelc.palermo2862

5 жыл бұрын

Yea im a pro screener myself and this was hard to watch. Especially for it to say the proper way to roll window screen. This was actually a video of exactly what you do not want to do.. I walk roofs and tackle 1500 sqft roofs a day alone. And for him to have that hard of a time with one petty window and have an assistant is just embarrassing...

@aurelienyonrac

Жыл бұрын

The proper way "wack, bang, scratch oops" "Leave a little bit in case i fu it up" I think it is funny

Thanks, for the info - worked good no cut used plastic tool . Cutting the corners helped with the corner stress. - Good tips ! Did two screen in about an hour. Having a helper is plus (wifey).

When you first roll in the new screen, use the rounded(convex) side of the roller, then concave side at the end... you give yourself extra material, this will eliminate those "oops" cuts.

@JAkedAgain

Жыл бұрын

good tip

Wow! The critics were in force on this video.

@JAkedAgain

Жыл бұрын

They always are the brightest stars attract the most hate

this was painful to watch... especially from someone claiming to be a pro... there was nothing proper about what did

@JAkedAgain

7 жыл бұрын

Tim Graham This is a how to, a way to teach unskilled uniformed people like you the proper way to rescreen a window. What exactly did you have a problem with.

@TimGrahamgrahambo9

7 жыл бұрын

Jacob M. Whitaker first of all, you display how uninformed and unskilled you are! You displayed how sloppy to do it in the least. The most you displayed carelessness and unprofessionalism with your handling and your attitude. It's that simple!

@JAkedAgain

7 жыл бұрын

Tim Graham ok Tim point out some things so I can explain them simply to you don't just make blanket statements about my video give me some points so we can discuss them. As far as uninformed or unqualified I don't think there's a class you can take to get certified as a window re-screener. Again you seem to be missing the point of the video it's how to with tips and tricks for people who don't do this all the time, like for example making the wrinkle in the screen so you can make a mistake and not have to start over. Also if you dont like the way I make my videos you can make your own and post the link in the comments if I think it's good I will post a link in the description.

@gooberthegod5907

7 жыл бұрын

Use a vinyl roller. You won't cut the screen.

@nadastankovic5245

4 жыл бұрын

JAked Again you are doing a good job. Don’t listen to him. He is miserable and angry at something. I am going to fix my window screen two of them tomorrow. The problem I had last time was the spline or rubber was hard to roll over screen. I think the guy at the store gave me a thicker spline and was hard to roll even for my son. It was not going easily in the groove. Tomorrow should I just take the frame and they can see the thickness of spline to use and size of mesh. Also maybe I should spray oil in the frame where mesh goes in. Also the roller has two sides and have to know which side or roller to use. I need one for pets cause I have two cats and a dog also scratches when window open. You absolutely did not do anything wrong and acted professionally. It’s easy for people to hide behind their keyboard and insult and criticize other people on KZread. I want to do a video on nails but need a good camera first. He’s probably a bully. 👏🏻👍🏻

Oh and the video was no help...that back and forth method will cut the screen 99 % of the time.. .

@JAkedAgain

4 жыл бұрын

It wasn't a problem for me

If you would take your time with the spline roller, you could avoid slicing the screen.

@JAkedAgain

2 жыл бұрын

It's true I have a heavy hand and hit it hard and fast

You said to leave some extra screen in case you cut into the screen and have to pull out more to redo. You said if you do that, it would leave enough for a couple of mistakes. If you don’t make any unwanted cuts, won’t that leave too much screen within the frame and it will look too loose....?

@JAkedAgain

4 жыл бұрын

Spread out over the entire area of the screen you wont notice it. If you think you can do it without mistakes go for it but i think one little wrinkle in the finished product is better then 2 or 3 attempt at the whole thing.

The "rubber" is called the spline.

I build screens for a living. These guys put on a clinic on how not to do it. 😅

@JAkedAgain

Ай бұрын

So make a better video and post the link here so we can see how it's done

@JAkedAgain

Ай бұрын

You don't know this but America is the put up or shut up country so...

What size spleen do you typically carry have on hand? Do you recommend a particular spline tool? Thanks

@JAkedAgain

6 жыл бұрын

I used a two sided metal one that was large on one side and small on the other. I would recommend buying a small one with a plastic head, it will work almost as well as a large one and with a plastic head it will be a lot harder to damage the screen.

thanks

I haven't attempted this yet but I think I'll do it differently than this joker.

@JAkedAgain

Жыл бұрын

lol i bet you haven't done a lot of things in years. The gym, a women, taken the stairs, had someone tell you they love you.

Jacob- I agree. I have never re-screened and I followed this and I now have 3 perfectly re-screened frames. I cut the extra screen off a bit differently, but this instructional video worked for me!

@JAkedAgain

7 жыл бұрын

Liz Richey thanks for the positive comment if you don't mind telling me how did you end up cutting the screen differently.

@lizrichey8759

7 жыл бұрын

I used an x-acto knife rested on the frame with the blade pointed our and just ran the it along the frame- no risk of cutting any screen. I did cut the screen on my first one and that is why I switched. I will also say that I took some double sided tape and slipped it between the screen and the frame on the small cut I made. I think your instructions are excellent!

Unbelievable. This should be the top 10 how not to videos.

@JAkedAgain

4 жыл бұрын

Lol what would you have done differently

@JAkedAgain

Жыл бұрын

I noticed you couldn't even say one thing you would do differently. Pathetic

I had to make 33 new frames, and my wife did the screens. For 14 unit rentals. She had no experience, but she did an awesome job...didn't cut one screen when putting the spline. .now shes working on 20 more for another property...

@JAkedAgain

Жыл бұрын

You're welcome I do what I can to teach the less fortunate like you and your wife. Keep at it buddy you just might make something of yourself yet.

"A little extra to work with " 5x 😄

@JAkedAgain

Жыл бұрын

good idea

Hack

annoying talking , hard to watch .

sorry, that was a sloopy job, I also noticed the concaved roller sliced the screen in a couple spots.

@JAkedAgain

Жыл бұрын

If it was a sloppy job why did it come out so perfectly? Also the proper term for the tool is a screen spline

Why wouldn't you use the old screen as a template to cut the new screen?

@JAkedAgain

5 жыл бұрын

No need

Rough as guts I’d hate to get you lot replacing mine haha

@JAkedAgain

2 жыл бұрын

Ya weak people are like that

@JAkedAgain

2 жыл бұрын

But hey if you can't take it well...

My roller has 2 wheels, why are they different?

@JAkedAgain

4 жыл бұрын

Ones for a big channel ones for a thin channel

@thatguyoverthere8355

4 жыл бұрын

@@JAkedAgain ahhhhhh yes...that explains it

@timothyholewinski2478

3 жыл бұрын

Oh brother. No... Don't listed to JAked. One (the smooth one) is to press the screen in to the channel (which may be omitted depending on technique/preference) and the concave one is designed to press in the SPLINE (not rubber) in.

@JAkedAgain

Жыл бұрын

don't lie to the poor guy you obviously have literally no idea what you are talking about. I'm honestly surprised you were able to even comment on this video

Hahaha, I wouldn't actually call that proper, but in the end you got a new screen so all is well. I think you still have a few tricks to learn.

@JAkedAgain

Жыл бұрын

It's proper only by the definition of the word.

This is teaching how to make all those mistakes you want to avoid, not professional one bit

@JAkedAgain

4 жыл бұрын

Name a few of the things you take issue with

@laoshij9382

4 жыл бұрын

Abdulaziz Why not show mistakes? Nothing unprofessional about it.

@laoshij9382

4 жыл бұрын

@@JAkedAgain Apparently Abdulaziz isn't responding. Hmm...

@JAkedAgain

Жыл бұрын

ya losers tend to shut down when pressed even a little bit

@JAkedAgain

Жыл бұрын

I must have missed it what exactly do you take issue with?

You should be wearing a microphone. Your voice fades in and out.

You are using the wrong side of your roller! I use clothes pins to clip the screen along the edges..now, run the round side of your spline roller into the groove, pushing your screen into the groove..making sure your screen hole align up with the inside of your frame. Now take the Concave side and insert the tip end of spline in the corner and line up your spline to the opposite corner...now rollthe spline into your groove, when you get to a corner, tuck and round and start again, making sure your spline is in a line with the grove and roll it in. When you come to the end. Pull just a bit and cut the spline so it will fit next to the beginning. If it is a little short..fine if more than 1/2 in cut a a bit of spline and insert and roll in place. Slowly go around once again to make sure the spline is inset in the grove. Ise a box knife an d carefully let the spline glide the box cutter along the edge .trim up corners.. Yes, making sure you installed the screen lift plates

@kymd9887

2 жыл бұрын

I love the tip of inserting the screen into the groves before the spline instead of doing both at once. I just started a job at Ace hardware and my coworkers clearly don't know what they're doing so I'm not being taught very well. I'm going to try this method tomorrow.

@JAkedAgain

Жыл бұрын

good advice

@JAkedAgain

Жыл бұрын

it's good advice

HACK!!

@JAkedAgain

4 жыл бұрын

Lol ok boomer how about you link your how to video here and I'll add the link in the description

@JAkedAgain

Жыл бұрын

I noticed you were incapable of producing your own video of you doing it better

You's guy's are wasters! Why didn't you turn the frame 90 degrees?

@JAkedAgain

2 жыл бұрын

Live and learn

HAHAHAHAHHAHAHAAAaaaaaa now thats funny lololololololol

@JAkedAgain

Жыл бұрын

thanks boomer it's heartwarming that someone of your advanced years getting my humor. Talk about cross generational

What a bad demo

@JAkedAgain

6 жыл бұрын

Jinhong Tam what didn't you like about it

@pmasoner

6 жыл бұрын

JAked Again m.kzread.info/dash/bejne/h6NppM2qYq2fZsY.html Here’s an example of a good how to video. Videos like this one are what make people comment things like they have on your video.

Horrible!...metal piece, rubber, roller he has no clue...

@michaelc.palermo2862

5 жыл бұрын

Lmfao no clue at all . what a trash can. And the title says the proper way to roll a window screen. Seriously . This video is exactly what you do not want to do!!!

@JAkedAgain

4 жыл бұрын

I have to work with the tools I was given and incase you didn't notice I completed it perfectly

@JAkedAgain

4 жыл бұрын

@@michaelc.palermo2862 ok Mike why don't you link your video of you properly rescreening a window and i will post it in the description

I can hardly watch.

@JAkedAgain

Жыл бұрын

lol then turn away boomer i work like i live hard and fast. deal with it it's better to burn out than fade away

You don’t know what your doing

I knew from the first sentence this was a horrible video!

@JAkedAgain

4 жыл бұрын

Lol ok boomer how about you share a link to your how to rescreen a window here and I'll link it in the description

@hollymaffia7352

4 жыл бұрын

@@JAkedAgain The Concord Carpenter 5 easy steps told me in 4 minutes

@JAkedAgain

Жыл бұрын

lol ok boomer lets see your video show me how you do it better

man you need to go to the school and learn a little bit and then make a KZread video.

@JAkedAgain

5 жыл бұрын

Please make a KZread video showing how to do it better and link it here if it's good I'll link it in the description.

@manit77

5 жыл бұрын

Imtiaz Khan you’re a dick.

@JAkedAgain

Жыл бұрын

i noticed you were incapable of making your own video to show me how to do it right. but i guess you took the put up or shut up to heart so i'll tip my hat to that.

@JAkedAgain

Жыл бұрын

it's ok its all he has and its sad